Resources

An isotropic, omnidirectional point source emits sound waves uniformly in all directions in an open field with zero ground reflection. At a radial distance of r1=3.50 mr_1 = 3.50\text{ m}, the measured sound level is β1=76.0 dB\beta_1 = 76.0\text{ dB}. A sound level meter is moved outward along the radial line to a distance r2=14.0 mr_2 = 14.0\text{ m}. Coupling the inverse-square law for spherical wave propagation (I∝1r2I \propto \frac{1}{r^2}) with the quadratic dependence of intensity on displacement amplitude (I∝A2I \propto A^2): (a) determine the ratio of the wave amplitude at r2r_2 to that at r1r_1, A2A1\frac{A_2}{A_1}; (b) calculate the sound level drop Δβ=β1−β2\Delta \beta = \beta_1 - \beta_2; and (c) find the resulting sound level β2\beta_2 at r2r_2.

Answer and steps

Final answer

(a) A2A1=0.250\frac{A_2}{A_1} = 0.250; (b) Δβ=12.0 dB\Delta \beta = 12.0\text{ dB}; (c) β2=64.0 dB\beta_2 = 64.0\text{ dB}.

Steps

Part (a): Determine the Amplitude Ratio A2A1\frac{A_2}{A_1}

For a point source emitting sound uniformly in all directions into three-dimensional space, the wave expands as spherical wavefronts of surface area 4πr24\pi r^2. Since energy is conserved:

I∝1r2I \propto \frac{1}{r^2}

The wave intensity is also proportional to the square of its displacement amplitude:

I∝A2I \propto A^2

Equating the two proportionalities yields:

A2∝1r2  ⟹  A∝1rA^2 \propto \frac{1}{r^2} \implies A \propto \frac{1}{r}

Therefore, the ratio of the amplitudes is inversely proportional to the ratio of the distances:

A2A1=r1r2\frac{A_2}{A_1} = \frac{r_1}{r_2}

Substitute the given distances r1=3.50 mr_1 = 3.50\text{ m} and r2=14.0 mr_2 = 14.0\text{ m}:

A2A1=3.50 m14.0 m=0.250\frac{A_2}{A_1} = \frac{3.50\text{ m}}{14.0\text{ m}} = 0.250


Part (b): Calculate the Sound Level Drop Δβ\Delta \beta

The sound level in decibels (dB\text{dB}) is defined as:

β=10log⁡10(II0)\beta = 10 \log_{10}\left(\frac{I}{I_0}\right)

where I0I_0 is the reference intensity (10−12 W/m210^{-12}\text{ W/m}^2).

The sound level drop between positions r1r_1 and r2r_2 is:

Δβ=β1−β2=10log⁡10(I1I0)−10log⁡10(I2I0)=10log⁡10(I1I2)\Delta \beta = \beta_1 - \beta_2 = 10 \log_{10}\left(\frac{I_1}{I_0}\right) - 10 \log_{10}\left(\frac{I_2}{I_0}\right) = 10 \log_{10}\left(\frac{I_1}{I_2}\right)

Using the inverse-square law for intensities:

I1I2=(r2r1)2=(14.03.50)2=42=16\frac{I_1}{I_2} = \left(\frac{r_2}{r_1}\right)^2 = \left(\frac{14.0}{3.50}\right)^2 = 4^2 = 16

Substitute this ratio into the decibel drop formula:

Δβ=10log⁡10(16)=10⋅4log⁡10(2)≈10⋅4(0.3010)=12.0 dB\Delta \beta = 10 \log_{10}(16) = 10 \cdot 4 \log_{10}(2) \approx 10 \cdot 4(0.3010) = 12.0\text{ dB}

(Pitfall to avoid: Do not confuse intensity with amplitude when calculating decibels. Intensity decreases by a factor of (r2/r1)2=16(r_2/r_1)^2 = 16, which yields 10log⁡10(16)≈12.0 dB10\log_{10}(16) \approx 12.0\text{ dB}. If using the amplitude ratio, recall that intensity scales as amplitude squared, so Δβ=20log⁡10(A1/A2)=20log⁡10(4)≈12.0 dB\Delta \beta = 20 \log_{10}(A_1/A_2) = 20 \log_{10}(4) \approx 12.0\text{ dB}.)


Part (c): Determine the Sound Level β2\beta_2 at r2r_2

Using the initial sound level β1=76.0 dB\beta_1 = 76.0\text{ dB} and the calculated drop Δβ\Delta \beta:

β2=β1−Δβ\beta_2 = \beta_1 - \Delta \beta

β2=76.0 dB−12.0 dB=64.0 dB\beta_2 = 76.0\text{ dB} - 12.0\text{ dB} = 64.0\text{ dB}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the scaling of wave amplitude with the inverse-square scaling of intensity, concluding that amplitude is proportional to 1/r².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A2A1=(r1r2)2⟹A2A1=(3.5014.0)2=(14)2⟹A2A1=0.0625\frac{A_2}{A_1} = \left(\frac{r_1}{r_2}\right)^2 ⟹ \frac{A_2}{A_1} = \left(\frac{3.50}{14.0}\right)^2 = \left(\frac{1}{4}\right)^2 ⟹ \frac{A_2}{A_1} = 0.0625

    Correct

    A2A1=r1r2=3.50 m14.0 m=0.250\frac{A_2}{A_1} = \frac{r_1}{r_2} = \frac{3.50\text{ m}}{14.0\text{ m}} = 0.250

    You applied the inverse-square relationship to amplitude rather than intensity. Since intensity scales as I∝1r2I \propto \frac{1}{r^2} and also as I∝A2I \propto A^2, taking the square root gives A∝1rA \propto \frac{1}{r}. Thus, the amplitude ratio is directly r1r2\frac{r_1}{r_2} without squaring.

  2. Step 2

    I1I2=(r2r1)2=(14.03.50)2=16⟹Δβ=10log⁡10(16)≈12.0 dB\frac{I_1}{I_2} = \left(\frac{r_2}{r_1}\right)^2 = \left(\frac{14.0}{3.50}\right)^2 = 16 ⟹ \Delta \beta = 10 \log_{10}(16) \approx 12.0\text{ dB}

  3. Step 3

    β2=β1−Δβ=76.0 dB−12.0 dB⟹β2=64.0 dB\beta_2 = \beta_1 - \Delta \beta = 76.0\text{ dB} - 12.0\text{ dB} ⟹ \beta_2 = 64.0\text{ dB}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the inverse-square law to determine the intensity ratio between the two distances.

You applied the logarithmic decibel formula accurately to find the sound level difference.

You subtracted the sound level drop from the original sound level to obtain the correct final decibel level.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Amplitude vs. intensity scaling confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated wave intensity with wave amplitude, assigning the inverse-square dependence (1/r21/r^2) directly to amplitude AA instead of taking the square root of intensity (A∝I∝1/rA \propto \sqrt{I} \propto 1/r).

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling of Spherical Waves
  • For a spherical sound wave from a point source, intensity I∝1r2I \propto \frac{1}{r^2}, while displacement amplitude A∝1rA \propto \frac{1}{r}.

  • Whenever you see amplitude AA in spherical propagation, connect it through I∝A2I \propto A^2 to remember that AA falls off as 1/r1/r, not 1/r21/r^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate intensity to radial distance: I∝1r2I \propto \frac{1}{r^2}.

  2. Relate wave amplitude to intensity: I∝A2I \propto A^2, which means A∝IA \propto \sqrt{I}.

  3. Combine the proportionalities: A∝1r2=1rA \propto \sqrt{\frac{1}{r^2}} = \frac{1}{r}.

  4. Set up the amplitude ratio: A2A1=r1r2=3.50 m14.0 m=0.250\frac{A_2}{A_1} = \frac{r_1}{r_2} = \frac{3.50\text{ m}}{14.0\text{ m}} = 0.250.

Final answer

(a) A2A1=0.250\frac{A_2}{A_1} = 0.250; (b) Δβ=12.0 dB\Delta \beta = 12.0\text{ dB}; (c) β2=64.0 dB\beta_2 = 64.0\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing physical quantities that scale with wave energy/intensity (I∝1/r2I \propto 1/r^2) from field quantities that scale with wave amplitude (A∝1/rA \propto 1/r).

  • Double-check formulas before calculating ratios by writing out the chain of proportionalities explicitly: I∝A2I \propto A^2 and I∝1/r2  ⟹  A∝1/rI \propto 1/r^2 \implies A \propto 1/r.

OverviewACEpath Teacher's Diagnosis

02 The student uses a factor of 20 instead of 10 in the decibel formula when operating directly on the intensity ratio rather than the amplitude or distance ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I∝A2 and I∝1r2  ⟹  A∝1r  ⟹  A2A1=r1r2=3.5014.0=0.250I \propto A^2 \text{ and } I \propto \frac{1}{r^2} \implies A \propto \frac{1}{r} \implies \frac{A_2}{A_1} = \frac{r_1}{r_2} = \frac{3.50}{14.0} = 0.250

  2. Step 2

    I1I2=(r2r1)2=(14.03.50)2=16  ⟹  Δβ=20log⁡10(16)≈24.1 dB\frac{I_1}{I_2} = \left(\frac{r_2}{r_1}\right)^2 = \left(\frac{14.0}{3.50}\right)^2 = 16 \implies \Delta\beta = 20\log_{10}(16) \approx 24.1\text{ dB}

    Correct

    Δβ=10log⁡10(I1I2)=10log⁡10(16)≈12.0 dB\Delta\beta = 10\log_{10}\left(\frac{I_1}{I_2}\right) = 10\log_{10}(16) \approx 12.0\text{ dB}

    By definition, the sound level in decibels scales as 10log⁡10(I1I2)10\log_{10}\left(\frac{I_1}{I_2}\right). The factor of 2020 only applies when taking the logarithm of an amplitude ratio (20log⁡10(A1A2)20\log_{10}\left(\frac{A_1}{A_2}\right)), because intensity is proportional to amplitude squared: 10log⁡10(A2)=20log⁡10(A)10\log_{10}(A^2) = 20\log_{10}(A). Applying 20log⁡1020\log_{10} to the intensity ratio 1616 doubled the actual decibel change.

  3. Step 3

    β2=β1−Δβ=76.0 dB−24.1 dB=51.9 dB\beta_2 = \beta_1 - \Delta\beta = 76.0\text{ dB} - 24.1\text{ dB} = 51.9\text{ dB}

    Correct

    β2=β1−Δβ=76.0 dB−12.0 dB=64.0 dB\beta_2 = \beta_1 - \Delta\beta = 76.0\text{ dB} - 12.0\text{ dB} = 64.0\text{ dB}

    Your subtraction method was algebraically correct, but the numerical result was affected by the incorrect value of Δβ\Delta\beta from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived that amplitude is inversely proportional to distance for a spherical wave.

You accurately evaluated the amplitude ratio A2A1=0.250\frac{A_2}{A_1} = 0.250.

You correctly calculated the intensity ratio I1I2=16\frac{I_1}{I_2} = 16 using the inverse-square law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplier confusion in decibel formula ($10\log_{10}$ vs $20\log_{10}$)

You originally wrote 20log⁡10(4)20\log_{10}(4), which is mathematically correct for the amplitude ratio A1A2=4\frac{A_1}{A_2} = 4, but crossed it out and inserted the intensity ratio 1616 while keeping the prefactor 2020.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing power/intensity quantities with field/amplitude quantities when using logarithmic decibel equations. Intensities use 10log⁡10(I1I2)10\log_{10}\left(\frac{I_1}{I_2}\right), whereas amplitudes use 20log⁡10(A1A2)20\log_{10}\left(\frac{A_1}{A_2}\right).

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel Prefactor Rule
  • Use 10log⁡1010\log_{10} for energy or power-like quantities (I,PI, P) and 20log⁡1020\log_{10} for root-power or field-like quantities (A,pA, p).

  • Check whether the ratio inside the logarithm is squared (intensity) or linear (amplitude). If intensity I1I2\frac{I_1}{I_2} is used, always multiply by 1010.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the decibel definition for intensity ratio: Δβ=10log⁡10(I1I2)=10log⁡10(16)≈12.0 dB\Delta\beta = 10\log_{10}\left(\frac{I_1}{I_2}\right) = 10\log_{10}(16) \approx 12.0\text{ dB}. (Alternatively, using the amplitude ratio: Δβ=20log⁡10(A1A2)=20log⁡10(4)≈12.0 dB\Delta\beta = 20\log_{10}\left(\frac{A_1}{A_2}\right) = 20\log_{10}(4) \approx 12.0\text{ dB}.)

  2. Subtract the drop from the initial sound level: β2=β1−Δβ=76.0 dB−12.0 dB=64.0 dB\beta_2 = \beta_1 - \Delta\beta = 76.0\text{ dB} - 12.0\text{ dB} = 64.0\text{ dB}.

Final answer

(a) A2A1=0.250\frac{A_2}{A_1} = 0.250; (b) Δβ=12.0 dB\Delta\beta = 12.0\text{ dB}; (c) β2=64.0 dB\beta_2 = 64.0\text{ dB}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the identity: Δβ=10log⁡10(I1I2)=10log⁡10[(A1A2)2]=20log⁡10(A1A2)\Delta\beta = 10\log_{10}\left(\frac{I_1}{I_2}\right) = 10\log_{10}\left[\left(\frac{A_1}{A_2}\right)^2\right] = 20\log_{10}\left(\frac{A_1}{A_2}\right).

  • Before evaluating decibel changes, explicitly write down whether the argument of your logarithm is an intensity ratio or an amplitude ratio.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the inverse-square law as a direct inverse law for intensity, setting I₁/I₂ = r₂/r₁.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A∝1r  ⟹  A2A1=3.5014.0=0.250A \propto \frac{1}{r} \implies \frac{A_2}{A_1} = \frac{3.50}{14.0} = 0.250

  2. Step 2

    I1I2=r2r1=14.03.50=4\frac{I_1}{I_2} = \frac{r_2}{r_1} = \frac{14.0}{3.50} = 4

    Correct

    I1I2=(r2r1)2=(14.03.50)2=16\frac{I_1}{I_2} = \left(\frac{r_2}{r_1}\right)^2 = \left(\frac{14.0}{3.50}\right)^2 = 16

    You set the intensity ratio proportional to r2/r1r_2/r_1 instead of (r2/r1)2(r_2/r_1)^2. Sound power spreads over the surface area of a sphere (4πr24\pi r^2), making intensity follow the inverse-square law, I∝1/r2I \propto 1/r^2.

  3. Step 3

    Δβ=10log⁡10(4)≈6.02 dB\Delta \beta = 10 \log_{10}(4) \approx 6.02\text{ dB}

    Correct

    Δβ=10log⁡10(16)≈12.0 dB\Delta \beta = 10 \log_{10}(16) \approx 12.0\text{ dB}

    Your decibel formula Δβ=10log⁡10(I1/I2)\Delta \beta = 10 \log_{10}(I_1/I_2) is correct, but your calculated value was affected by using I1/I2=4I_1/I_2 = 4 instead of 1616.

  4. Step 4

    β2=β1−Δβ=76.0 dB−6.02 dB=69.98 dB\beta_2 = \beta_1 - \Delta \beta = 76.0\text{ dB} - 6.02\text{ dB} = 69.98\text{ dB}

    Correct

    β2=76.0 dB−12.0 dB=64.0 dB\beta_2 = 76.0\text{ dB} - 12.0\text{ dB} = 64.0\text{ dB}

    Your subtraction method is correct, but the numerical answer inherits the error from the incorrect decibel drop.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established that displacement amplitude scales as A∝1/rA \propto 1/r for a spherical wave.

You correctly computed the amplitude ratio A2A1=0.250\frac{A_2}{A_1} = 0.250.

You correctly applied the logarithmic relationship Δβ=10log⁡10(I1/I2)\Delta \beta = 10 \log_{10}(I_1/I_2) and subtracted the drop to find β2\beta_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse-Square Law Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the spatial scaling of displacement amplitude (A∝1/rA \propto 1/r) with the spatial scaling of wave intensity (I∝1/r2I \propto 1/r^2), omitting the exponent of 2 in the intensity ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse-Square Scaling of Intensity
  • For spherical waves from an isotropic point source, I=P4πr2  ⟹  I∝1r2I = \frac{P}{4\pi r^2} \implies I \propto \frac{1}{r^2}.

  • Always square the distance ratio when calculating the ratio of intensities: I1I2=(r2r1)2\frac{I_1}{I_2} = \left(\frac{r_2}{r_1}\right)^2.

Decibel Drop from Distance Ratio
  • Δβ=10log⁡10(I1I2)=20log⁡10(r2r1)=20log⁡10(A1A2)\Delta \beta = 10 \log_{10}\left(\frac{I_1}{I_2}\right) = 20 \log_{10}\left(\frac{r_2}{r_1}\right) = 20 \log_{10}\left(\frac{A_1}{A_2}\right).

  • If working directly with the distance or amplitude ratio, use a prefactor of 2020 rather than 1010 to account for the square.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the inverse-square law for intensities: I1I2=(r2r1)2=(14.03.50)2=42=16\frac{I_1}{I_2} = \left(\frac{r_2}{r_1}\right)^2 = \left(\frac{14.0}{3.50}\right)^2 = 4^2 = 16.

  2. Calculate the sound level drop: Δβ=10log⁡10(16)=10⋅4log⁡10(2)≈12.0 dB\Delta \beta = 10 \log_{10}(16) = 10 \cdot 4 \log_{10}(2) \approx 12.0\text{ dB}.

  3. Calculate the sound level at r2r_2: β2=76.0 dB−12.0 dB=64.0 dB\beta_2 = 76.0\text{ dB} - 12.0\text{ dB} = 64.0\text{ dB}.

Final answer

(a) A2A1=0.250\frac{A_2}{A_1} = 0.250; (b) Δβ=12.0 dB\Delta \beta = 12.0\text{ dB}; (c) β2=64.0 dB\beta_2 = 64.0\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric derivation of the inverse-square law based on spherical surface area 4πr24\pi r^2.

  • Practice calculating decibel changes using both intensity ratios (10log⁡1010\log_{10}) and amplitude or distance ratios (20log⁡1020\log_{10}).

Lock it in

Similar question

01

A spherical sound source produces a displacement amplitude of A1=8.0 μmA_1 = 8.0\ \mu\text{m} at a distance of r1=5.0 mr_1 = 5.0\text{ m}. What is the wave amplitude A2A_2 at a distance of r2=20.0 mr_2 = 20.0\text{ m}?

Answer

2.0 μm2.0\ \mu\text{m}. Since A∝1rA \propto \frac{1}{r}, A2=A1(r1r2)=8.0 μm×(5.0 m20.0 m)=2.0 μmA_2 = A_1 \left(\frac{r_1}{r_2}\right) = 8.0\ \mu\text{m} \times \left(\frac{5.0\text{ m}}{20.0\text{ m}}\right) = 2.0\ \mu\text{m}.

02

At distance r1r_1 from a small isotropic buzzer, the sound level is β1=80.0 dB\beta_1 = 80.0\text{ dB}. Moving to distance r2r_2, the wave amplitude drops to one-third of its original value (A2=13A1A_2 = \frac{1}{3}A_1). Find the ratio of distances r2r1\frac{r_2}{r_1} and the sound level drop Δβ=β1−β2\Delta \beta = \beta_1 - \beta_2.

Answer

r2r1=3.0\frac{r_2}{r_1} = 3.0 and Δβ≈9.54 dB\Delta \beta \approx 9.54\text{ dB}. Since A∝1rA \propto \frac{1}{r}, r2r1=A1A2=3.0\frac{r_2}{r_1} = \frac{A_1}{A_2} = 3.0. Intensity scales as I∝A2I \propto A^2, so I1I2=32=9\frac{I_1}{I_2} = 3^2 = 9. Thus, Δβ=10log⁡10(9)=20log⁡10(3)≈9.54 dB\Delta \beta = 10\log_{10}(9) = 20\log_{10}(3) \approx 9.54\text{ dB}.

03

A sound sensor measures a sound level of 85.0 dB85.0\text{ dB} at r1=2.00 mr_1 = 2.00\text{ m} from a uniform point source. You move to a distance r2r_2 where the sound level is 73.0 dB73.0\text{ dB}. Determine: (a) the new distance r2r_2, and (b) the amplitude ratio A2A1\frac{A_2}{A_1}.

Answer

(a) r2≈7.96 mr_2 \approx 7.96\text{ m}; (b) A2A1≈0.251\frac{A_2}{A_1} \approx 0.251. The decibel difference is Δβ=85.0−73.0=12.0 dB\Delta \beta = 85.0 - 73.0 = 12.0\text{ dB}. Using Δβ=20log⁡10(r2r1)\Delta \beta = 20\log_{10}\left(\frac{r_2}{r_1}\right), we find log⁡10(r2r1)=12.020=0.60\log_{10}\left(\frac{r_2}{r_1}\right) = \frac{12.0}{20} = 0.60, so r2r1=100.60≈3.981\frac{r_2}{r_1} = 10^{0.60} \approx 3.981. Thus, r2=2.00×3.981≈7.96 mr_2 = 2.00 \times 3.981 \approx 7.96\text{ m}. The amplitude ratio is A2A1=r1r2=10−0.60≈0.251\frac{A_2}{A_1} = \frac{r_1}{r_2} = 10^{-0.60} \approx 0.251.

Loading workspace…