Resources

A block of mass m1=4.00 kgm_1 = 4.00\text{ kg} resting on a rough horizontal tabletop (muk=0.200\\mu_k = 0.200) is connected via a lightweight string passing over an ideal frictionless pulley at the table edge to a hanging mass m2=3.00 kgm_2 = 3.00\text{ kg}. The block m1m_1 is also attached to an ideal horizontal spring of stiffness k=150 N/mk = 150\text{ N/m} whose other end is anchored to a fixed wall behind the block. The system is released from rest when the spring is at its unstretched equilibrium length. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) For block m1m_1 as it slides to the right, identify all forces acting on it and specify which forces are conservative and which are non-conservative. (b) Calculate the instantaneous tension TT in the connecting string at the exact instant the block has displaced by x=0.0800 mx = 0.0800\text{ m} to the right, where its acceleration is a=1.37 m/s2a = 1.37\text{ m/s}^2.

Answer and steps

Final answer

(a) Conservative forces: Elastic restoring force F⃗elastic\vec{F}_{\text{elastic}} (spring) and Gravitational force F⃗g\vec{F}_g (Earth); Non-conservative forces: Normal force F⃗N\vec{F}_N (table), Kinetic frictional force f⃗k\vec{f}_k (table), and Tension force T⃗\vec{T} (connecting string). (b) T=25.3 NT = 25.3\text{ N}.

Steps

Part (a): Identification and Classification of Forces Acting on m1m_1

As block m1m_1 slides to the right along the horizontal surface, it experiences five distinct forces:

  1. Gravitational Force (F⃗g\vec{F}_g):

    • Direction: Downward, toward the center of the Earth.
    • Classification: Conservative. The work done by gravity depends only on the initial and final vertical positions, not on the path taken.
  2. Elastic Force (F⃗elastic\vec{F}_{\text{elastic}} or F⃗s\vec{F}_s):

    • Direction: Horizontally to the left (opposing the spring's extension).
    • Classification: Conservative. An ideal spring stores energy reversibly as elastic potential energy, and the work done around any closed path is zero.
  3. Normal Force (F⃗N\vec{F}_N):

    • Direction: Perpendicular to the surface, pointing upward.
    • Classification: Non-conservative. It is a contact constraint force that does not have an associated potential energy function.
  4. Kinetic Frictional Force (f⃗k\vec{f}_k):

    • Direction: Horizontally to the left (opposing the relative motion).
    • Classification: Non-conservative. Friction dissipates mechanical energy irreversibly into thermal energy; its work depends directly on the path length.
  5. Tension Force (T⃗\vec{T}):

    • Direction: Horizontally to the right (along the string).
    • Classification: Non-conservative. Tension is an external contact force transferring mechanical energy between the two masses.

Part (b): Calculating the Instantaneous Tension TT

Because the string is inextensible and taut, both masses share the same magnitude of acceleration, a=1.37 m/s2a = 1.37\text{ m/s}^2.

The simplest way to calculate the tension TT is to analyze the hanging mass m2m_2, which is subject to only two vertical forces:

  • Downward gravitational force: m2gm_2 g
  • Upward tension force: TT

Taking the downward direction as positive (the direction of acceleration for m2m_2):

m2g−T=m2am_2 g - T = m_2 a

Rearranging to solve for the tension TT:

T=m2(g−a)T = m_2 (g - a)

Substitute the given numerical values:

T=3.00 kg⋅(9.80 m/s2−1.37 m/s2)T = 3.00\text{ kg} \cdot (9.80\text{ m/s}^2 - 1.37\text{ m/s}^2)

T=3.00⋅8.43=25.29 N≈25.3 NT = 3.00 \cdot 8.43 = 25.29\text{ N} \approx 25.3\text{ N}

(Alternative check using m1m_1: T=m1a+fk+kx=(4.00⋅1.37)+(0.200⋅4.00⋅9.80)+(150⋅0.0800)=5.48+7.84+12.0=25.32 N≈25.3 NT = m_1 a + f_k + kx = (4.00 \cdot 1.37) + (0.200 \cdot 4.00 \cdot 9.80) + (150 \cdot 0.0800) = 5.48 + 7.84 + 12.0 = 25.32\text{ N} \approx 25.3\text{ N}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the normal force as conservative because it does zero work on a horizontal surface, and forgets that the hanging mass is accelerating downward when finding tension, assuming static equilibrium T = m2*g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Gravity: conservative Spring force: conservative Normal force: conservative Friction: non-conservative Tension: non-conservative

    Correct

    Conservative: Gravity F⃗g\vec{F}_g, Spring force F⃗s\vec{F}_s; Non-conservative: Normal force F⃗N\vec{F}_N, Friction f⃗k\vec{f}_k, Tension T⃗\vec{T}

    You correctly classified four of the forces, but the normal force is non-conservative. Even though the normal force does zero work when displacement is purely horizontal, it is a contact constraint force with no associated potential energy function.

  2. Step 2

    T=m2gT = m_2 g

    Correct

    m2g−T=m2a  ⟹  T=m2(g−a)m_2 g - T = m_2 a \implies T = m_2(g - a)

    The hanging mass m2m_2 is accelerating downward at a=1.37 m/s2a = 1.37\text{ m/s}^2, so the net force is non-zero. Setting T=m2gT = m_2 g assumes the system is in static equilibrium.

  3. Step 3

    T=(3.00 kg)(9.80 m/s2)  ⟹  T=29.4 NT = (3.00\text{ kg})(9.80\text{ m/s}^2) \implies T = 29.4\text{ N}

    Correct

    T=(3.00 kg)(9.80 m/s2−1.37 m/s2)=25.3 NT = (3.00\text{ kg})(9.80\text{ m/s}^2 - 1.37\text{ m/s}^2) = 25.3\text{ N}

    This numerical calculation follows directly from the static equilibrium formula in step 2 rather than the dynamic equation of motion.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified all five relevant forces acting on the horizontal block.

You correctly classified gravity and the spring restoring force as conservative.

You correctly classified kinetic friction and string tension as non-conservative.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium assumption in dynamic system & Normal force classification

You equated tension directly to the weight of the hanging block, overlooking that the block is accelerating downward.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing zero work along a constrained trajectory with a conservative force field, combined with applying static balance (Fnet=0F_{\text{net}} = 0) to an accelerating object.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservative Force Definition
  • A force is conservative if and only if the work it does around any closed loop is zero and can be represented by a path-independent potential energy function UU.

  • Do not treat contact forces like F⃗N\vec{F}_N as conservative simply because they happen to be perpendicular to displacement.

Newton's Second Law for Connected Systems
  • When an object accelerates, ∑F=ma\sum F = ma, which means T≠mgT \neq mg unless a=0a = 0.

  • Always draw a separate free-body diagram for the accelerating hanging mass and write mg−T=mam g - T = m a before solving for tension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law for m2m_2 with the downward direction taken as positive: ∑Fy=m2g−T=m2a\sum F_y = m_2 g - T = m_2 a.

  2. Isolate the tension force algebraically: T=m2(g−a)T = m_2(g - a).

  3. Substitute the given mass and acceleration: T=3.00 kg⋅(9.80 m/s2−1.37 m/s2)=3.00⋅8.43 N=25.29 N≈25.3 NT = 3.00\text{ kg} \cdot (9.80\text{ m/s}^2 - 1.37\text{ m/s}^2) = 3.00 \cdot 8.43\text{ N} = 25.29\text{ N} \approx 25.3\text{ N}.

Final answer

(a) Conservative: Gravity, Spring force; Non-conservative: Normal force, Friction, Tension. (b) T=25.3 NT = 25.3\text{ N}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the criteria for conservative forces: check whether a unique scalar potential energy U(r⃗)U(\vec{r}) exists.

  • Practice drawing free-body diagrams for accelerating hanging masses to ensure acceleration terms are included in ∑F=ma\sum F = ma.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the sign of acceleration for the downward-accelerating hanging mass, writing T - m2*g = m2*a instead of m2*g - T = m2*a.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Forces acting on m1m_1: Gravity: conservative Spring force: conservative Normal force: non-conservative Kinetic friction: non-conservative Tension: non-conservative

  2. Step 2

    T−m2∗g=m2∗aT - m_2 * g = m_2 * a

    Correct

    m2g−T=m2am_2 g - T = m_2 a (or T−m2g=−m2aT - m_2 g = -m_2 a)

    Because block m1m_1 slides to the right toward the pulley, the hanging mass m2m_2 accelerates downward. If you choose upward as the positive direction, the downward acceleration must be negative (−a-a), giving T−m2g=−m2aT - m_2 g = -m_2 a. Choosing downward as positive gives m2g−T=m2am_2 g - T = m_2 a.

  3. Step 3

    T=m2∗(g+a)  ⟹  T=(3.00 kg)(9.80 m/s2+1.37 m/s2)  ⟹  T=33.5 NT = m_2 * (g + a) \implies T = (3.00\text{ kg})(9.80\text{ m/s}^2 + 1.37\text{ m/s}^2) \implies T = 33.5\text{ N}

    Correct

    T=m2(g−a)=(3.00 kg)(9.80 m/s2−1.37 m/s2)=25.3 NT = m_2(g - a) = (3.00\text{ kg})(9.80\text{ m/s}^2 - 1.37\text{ m/s}^2) = 25.3\text{ N}

    Your algebra and arithmetic were executed properly, but the resulting numerical value was affected by the sign error in your equation of motion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified every force acting on the sliding block.

You accurately classified each force as conservative or non-conservative based on whether its work is path-independent.

You correctly recognized that analyzing the hanging mass m2m_2 provides the most direct route to find string tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in Newton's second law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated an upward net force expression (T−m2gT - m_2 g) to a positive acceleration term without accounting for the fact that the physical acceleration of the hanging block points downward.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Acceleration Vector
  • Before writing ∑F=ma\sum F = ma, explicitly sketch an arrow showing the direction of physical acceleration a⃗\vec{a} for that specific body.

  • Identify that as m1m_1 moves right, m2m_2 descends, so a⃗2\vec{a}_2 points downward.

Consistent Coordinate Axis
  • Assign the positive axis along the direction of motion or acceleration to keep a>0a > 0, so Forces with a⃗−Forces against a⃗=ma\text{Forces with } \vec{a} - \text{Forces against } \vec{a} = ma.

  • Take downward as positive for m2m_2, giving Fdown−Fup=m2g−T=m2aF_{\text{down}} - F_{\text{up}} = m_2 g - T = m_2 a.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set downward as the positive direction: m2g−T=m2am_2 g - T = m_2 a

  2. Rearrange to isolate tension: T=m2(g−a)T = m_2(g - a)

  3. Substitute the given values: T=(3.00 kg)(9.80 m/s2−1.37 m/s2)=(3.00 kg)(8.43 m/s2)T = (3.00\text{ kg})(9.80\text{ m/s}^2 - 1.37\text{ m/s}^2) = (3.00\text{ kg})(8.43\text{ m/s}^2)

Final answer

T=25.3 NT = 25.3\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw an acceleration arrow beside your free-body diagram before writing ∑F=ma\sum F = ma.

  • Check your tension result qualitatively: if a hanging mass accelerates downward, tension must be strictly less than its weight (T<mgT < mg).

OverviewACEpath Teacher's Diagnosis

03 The student tries to find tension using block m1 but omits the spring force from Newton's second law equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Forces on m1m_1:

    • Gravity (conservative)
    • Spring force (conservative)
    • Normal force (non-conservative)
    • Friction (non-conservative)
    • Tension (non-conservative)
  2. Step 2

    fk=μk⋅m1⋅g=(0.200)(4.00 kg)(9.80 m/s2)=7.84 Nf_k = \mu_k \cdot m_1 \cdot g = (0.200)(4.00\text{ kg})(9.80\text{ m/s}^2) = 7.84\text{ N}

  3. Step 3

    T−fk=m1⋅a  ⟹  T=m1⋅a+fkT - f_k = m_1 \cdot a \implies T = m_1 \cdot a + f_k

    Correct

    T−fk−Fs=m1a  ⟹  T=m1a+fk+kxT - f_k - F_s = m_1 a \implies T = m_1 a + f_k + kx (or from m2m_2: m2g−T=m2am_2 g - T = m_2 a)

    You omitted the spring restoring force Fs=kxF_s = kx pulling block m1m_1 to the left. Since the block has displaced by x=0.0800 mx = 0.0800\text{ m}, the spring exerts an additional force Fs=(150 N/m)(0.0800 m)=12.0 NF_s = (150\text{ N/m})(0.0800\text{ m}) = 12.0\text{ N} opposing the rightward motion.

  4. Step 4

    T=(4.00 kg)(1.37 m/s2)+7.84 N=5.48 N+7.84 N=13.3 NT = (4.00\text{ kg})(1.37\text{ m/s}^2) + 7.84\text{ N} = 5.48\text{ N} + 7.84\text{ N} = 13.3\text{ N}

    Correct

    T=5.48 N+7.84 N+12.0 N=25.3 NT = 5.48\text{ N} + 7.84\text{ N} + 12.0\text{ N} = 25.3\text{ N} (or T=m2(g−a)=3.00(9.80−1.37)=25.3 NT = m_2(g - a) = 3.00(9.80 - 1.37) = 25.3\text{ N})

    Your arithmetic follows your equation, but because the 12.0 N12.0\text{ N} spring force was missing from your force balance, your final tension is understated.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all five forces acting on block m1m_1 and classified each as conservative or non-conservative.

You correctly determined that the normal force equals m1gm_1 g on the horizontal surface and computed the kinetic friction force as 7.84 N7.84\text{ N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted force in Newton's second law equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You correctly recognized that the spring exerts a force in your conceptual list for part (a), but you forgot to include that spring force Fs=kxF_s = kx when formulating the horizontal net force equation ΣFx=m1a\Sigma F_x = m_1 a in part (b). Alternatively, you could have bypassed the horizontal forces altogether by applying Newton's second law directly to hanging mass m2m_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Free-Body Diagram Check
  • Every force identified on a body's free-body diagram must appear in its corresponding ΣF=ma\Sigma F = ma component equation.

  • Before calculating, draw arrows for all forces along the axis of motion (here: +T+T to the right, −fk-f_k and −Fs-F_s to the left) and verify that every arrow corresponds to a term in ΣFx\Sigma F_x.

Choose the Simpler Subsystem
  • In connected systems with a massless string over an ideal pulley, you can solve for tension using whichever connected mass has fewer forces acting on it.

  • Notice that hanging mass m2m_2 has only two vertical forces (m2gm_2 g downward and TT upward), giving T=m2(g−a)T = m_2(g - a) in a single step with no spring or friction terms required.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the spring restoring force Fs=kxF_s = kx in the horizontal force balance: ΣFx=T−fk−kx=m1a\Sigma F_x = T - f_k - kx = m_1 a.

  2. Calculate the spring force magnitude: Fs=kx=(150 N/m)(0.0800 m)=12.0 NF_s = kx = (150\text{ N/m})(0.0800\text{ m}) = 12.0\text{ N}.

  3. Rearrange for tension: T=m1a+fk+kx=(4.00 kg)(1.37 m/s2)+7.84 N+12.0 N=5.48 N+7.84 N+12.0 NT = m_1 a + f_k + kx = (4.00\text{ kg})(1.37\text{ m/s}^2) + 7.84\text{ N} + 12.0\text{ N} = 5.48\text{ N} + 7.84\text{ N} + 12.0\text{ N}.

  4. Alternatively, apply ΣFy=m2a\Sigma F_y = m_2 a to hanging mass m2m_2: m2g−T=m2a  ⟹  T=m2(g−a)=(3.00 kg)(9.80 m/s2−1.37 m/s2)=25.29 N≈25.3 Nm_2 g - T = m_2 a \implies T = m_2(g - a) = (3.00\text{ kg})(9.80\text{ m/s}^2 - 1.37\text{ m/s}^2) = 25.29\text{ N} \approx 25.3\text{ N}.

Final answer

T=25.3 NT = 25.3\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always match your force identification list directly against the terms in your ΣF=ma\Sigma F = ma equation before substituting values.

  • When finding tension in a coupled system, inspect both bodies first to see if the other body offers an equation with fewer forces.

Lock it in

Similar question

01

A 5.0 kg5.0\text{ kg} elevator accelerates downward at 2.0 m/s22.0\text{ m/s}^2. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find the tension in the supporting cable.

Answer

Apply Newton's second law vertically downward: mg−T=ma  ⟹  T=m(g−a)=5.0 kg⋅(9.8 m/s2−2.0 m/s2)=39 Nmg - T = ma \implies T = m(g - a) = 5.0\text{ kg} \cdot (9.8\text{ m/s}^2 - 2.0\text{ m/s}^2) = 39\text{ N}.

02

A block of mass M=2.0 kgM = 2.0\text{ kg} on a frictionless horizontal table is connected by a light cord over an ideal pulley to a hanging mass m=1.0 kgm = 1.0\text{ kg}. Released from rest with g=9.8 m/s2g = 9.8\text{ m/s}^2: (a) find the system acceleration aa, and (b) calculate the tension TT in the cord.

Answer

(a) System equation: a=mgM+m=1.0⋅9.82.0+1.0=3.27 m/s2a = \frac{m g}{M + m} = \frac{1.0 \cdot 9.8}{2.0 + 1.0} = 3.27\text{ m/s}^2. (b) Using the horizontal block: T=Ma=2.0⋅3.27=6.54 NT = M a = 2.0 \cdot 3.27 = 6.54\text{ N} (or via hanging mass: T=m(g−a)=1.0(9.8−3.27)=6.53 N≈6.5 NT = m(g - a) = 1.0(9.8 - 3.27) = 6.53\text{ N} \approx 6.5\text{ N}).

03

A crate of mass m1=6.0 kgm_1 = 6.0\text{ kg} is on a rough incline of angle 30∘30^\circ with μk=0.15\mu_k = 0.15. It is pulled up the incline by a cord attached to a hanging mass m2=8.0 kgm_2 = 8.0\text{ kg}. Classify every force acting on m1m_1 as conservative or non-conservative, and express the equation for cord tension TT in terms of m2m_2, gg, and downward acceleration a2a_2 of m2m_2.

Answer

Forces on m1m_1: Gravity (conservative); Normal force, Kinetic friction, and Cord tension (all three non-conservative). Tension equation from m2m_2: m2g−T=m2a2  ⟹  T=m2(g−a2)m_2 g - T = m_2 a_2 \implies T = m_2(g - a_2).

Loading workspace…