Resources

An optical laboratory sensor detects a sharp, real, inverted image formed at an image distance of di=+36.0 cmd_i = +36.0\text{ cm} behind a thin converging lens. From the ray diagram geometry, the incident parallel ray refracts through the focal point while the central ray passes undeviated through the optical center, producing an image that is inverted and exactly twice the height of the original object (m=−2.00m = -2.00). Working backward from this final image state: (a) determine the original object position dod_o relative to the lens, and (b) calculate the focal length ff of the converging lens.

Answer and steps

Final answer

(a) do=18.0 cmd_o = 18.0\text{ cm} in front of the lens; (b) f=+12.0 cmf = +12.0\text{ cm}.

Steps

01

Determine the object distance dod_o using the magnification equation

In thin-lens optics, linear magnification mm relates the image distance did_i and the object distance dod_o according to the standard Cartesian sign convention:

m=−didom = -\frac{d_i}{d_o}

We are given:

  • Magnification, m=−2.00m = -2.00 (the negative sign indicates an inverted image)
  • Image distance, di=+36.0 cmd_i = +36.0\text{ cm} (positive because it is a real image formed behind the lens)

Substitute these values into the magnification equation to solve for dod_o:

−2.00=−36.0 cmdo-2.00 = -\frac{36.0\text{ cm}}{d_o}

do=36.0 cm2.00=18.0 cmd_o = \frac{36.0\text{ cm}}{2.00} = 18.0\text{ cm}

Since do>0d_o > 0, the object is placed 18.0 cm18.0\text{ cm} in front of the lens.

Common Pitfall: Forgetting the minus sign in the magnification formula m=−di/dom = -d_i / d_o. Since the image is inverted, mm is negative, which correctly yields a positive object distance dod_o for a real object.


02

Calculate the focal length ff using the thin-lens equation

The thin-lens equation relates the focal length ff, the object distance dod_o, and the image distance did_i:

1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}

Substitute do=18.0 cmd_o = 18.0\text{ cm} and di=36.0 cmd_i = 36.0\text{ cm}:

1f=118.0 cm+136.0 cm\frac{1}{f} = \frac{1}{18.0\text{ cm}} + \frac{1}{36.0\text{ cm}}

Find a common denominator:

1f=236.0 cm+136.0 cm=336.0 cm=112.0 cm\frac{1}{f} = \frac{2}{36.0\text{ cm}} + \frac{1}{36.0\text{ cm}} = \frac{3}{36.0\text{ cm}} = \frac{1}{12.0\text{ cm}}

Taking the reciprocal gives:

f=+12.0 cmf = +12.0\text{ cm}

The positive value of ff confirms that the lens is converging (convex).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the magnification relation m = -d_i / d_o, setting m = d_i / d_o and arriving at a negative object distance d_o = -18.0 cm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=dido  ⟹  −2.00=36.0do  ⟹  do=36.0−2.00  ⟹  do=−18.0 cmm = \frac{d_i}{d_o} \implies -2.00 = \frac{36.0}{d_o} \implies d_o = \frac{36.0}{-2.00} \implies d_o = -18.0\text{ cm}

    Correct

    m=−dido  ⟹  −2.00=−36.0 cmdo  ⟹  do=18.0 cmm = -\frac{d_i}{d_o} \implies -2.00 = -\frac{36.0\text{ cm}}{d_o} \implies d_o = 18.0\text{ cm}

    You omitted the required negative sign in the thin-lens magnification formula. In standard Cartesian optics sign conventions, lateral magnification is defined as m=−didom = -\frac{d_i}{d_o}, which accounts for the inversion of real images and ensures the distance to a real object in front of the lens remains positive.

  2. Step 2

    1f=1do+1di  ⟹  1f=1−18.0+136.0=−236.0+136.0=−136.0  ⟹  f=−36.0 cm\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \implies \frac{1}{f} = \frac{1}{-18.0} + \frac{1}{36.0} = \frac{-2}{36.0} + \frac{1}{36.0} = \frac{-1}{36.0} \implies f = -36.0\text{ cm}

    Correct

    1f=118.0 cm+136.0 cm=336.0 cm  ⟹  f=+12.0 cm\frac{1}{f} = \frac{1}{18.0\text{ cm}} + \frac{1}{36.0\text{ cm}} = \frac{3}{36.0\text{ cm}} \implies f = +12.0\text{ cm}

    You stated the thin-lens equation correctly and performed the fraction arithmetic without calculation errors, but substituting your negative object distance from Step 1 carried the error through and mistakenly gave a negative (diverging) focal length.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the magnification value m=−2.00m = -2.00 to represent an inverted image.

You correctly identified and applied the thin-lens equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

You found a common denominator and computed the reciprocal accurately in your algebraic steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing negative sign in magnification formula

You wrote m=didom = \frac{d_i}{d_o} rather than m=−didom = -\frac{d_i}{d_o}, missing the intrinsic minus sign.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the geometric ratio of image-to-object distances dido\frac{d_i}{d_o} with signed Cartesian linear magnification m=−didom = -\frac{d_i}{d_o}, which requires an explicit minus sign to couple real positive distances (do>0d_o > 0, di>0d_i > 0) with inverted images (m<0m < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the sign convention of magnification
  • For thin lenses under the standard sign convention, lateral magnification is m=−didom = -\frac{d_i}{d_o}.

  • Always write the explicit negative sign in m=−didom = -\frac{d_i}{d_o} before substituting known values.

Perform a physical sanity check on lens type
  • A converging (convex) lens forming a real image must have a positive focal length (f>0f > 0).

  • Verify that your calculated focal length is positive whenever a converging lens is specified.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the magnification equation with the standard minus sign: m=−didom = -\frac{d_i}{d_o}.

  2. Substitute m=−2.00m = -2.00 and di=+36.0 cmd_i = +36.0\text{ cm}: −2.00=−36.0 cmdo-2.00 = -\frac{36.0\text{ cm}}{d_o}.

  3. Solve for the object distance: do=−36.0 cm−2.00=+18.0 cmd_o = \frac{-36.0\text{ cm}}{-2.00} = +18.0\text{ cm}.

  4. Substitute do=18.0 cmd_o = 18.0\text{ cm} and di=36.0 cmd_i = 36.0\text{ cm} into the thin-lens equation: 1f=118.0 cm+136.0 cm=336.0 cm\frac{1}{f} = \frac{1}{18.0\text{ cm}} + \frac{1}{36.0\text{ cm}} = \frac{3}{36.0\text{ cm}}.

  5. Take the reciprocal to find the focal length: f=36.0 cm3=+12.0 cmf = \frac{36.0\text{ cm}}{3} = +12.0\text{ cm}.

Final answer

(a) do=18.0 cmd_o = 18.0\text{ cm} in front of the lens; (b) f=+12.0 cmf = +12.0\text{ cm}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the magnification formula with its explicit minus sign: m=−didom = -\frac{d_i}{d_o}.

  • Check whether an object is a standard real source (do>0d_o > 0) before proceeding to the lens formula.

  • Verify that your final focal length sign matches the lens type: positive for converging lenses, negative for diverging lenses.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the magnification definition as m = d_o / d_i instead of -d_i / d_o, leading to an incorrect object distance of -72.0 cm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=dodi  ⟹  −2.00=do36.0  ⟹  do=−2.00×36.0  ⟹  do=−72.0 cmm = \frac{d_o}{d_i} \implies -2.00 = \frac{d_o}{36.0} \implies d_o = -2.00 \times 36.0 \implies d_o = -72.0\text{ cm}

    Correct

    m=−dido  ⟹  −2.00=−36.0 cmdo  ⟹  do=+18.0 cmm = -\frac{d_i}{d_o} \implies -2.00 = -\frac{36.0\text{ cm}}{d_o} \implies d_o = +18.0\text{ cm}

    You inverted the definition of linear magnification and omitted the standard sign convention. Linear magnification is defined as image height over object height, which geometrically equals m=−didom = -\frac{d_i}{d_o}, not dodi\frac{d_o}{d_i}.

  2. Step 2

    1f=1do+1di  ⟹  1f=1−72.0+136.0=−172.0+272.0=172.0  ⟹  f=72.0 cm\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \implies \frac{1}{f} = \frac{1}{-72.0} + \frac{1}{36.0} = -\frac{1}{72.0} + \frac{2}{72.0} = \frac{1}{72.0} \implies f = 72.0\text{ cm}

    Correct

    1f=118.0 cm+136.0 cm=236.0 cm+136.0 cm=336.0 cm=112.0 cm  ⟹  f=+12.0 cm\frac{1}{f} = \frac{1}{18.0\text{ cm}} + \frac{1}{36.0\text{ cm}} = \frac{2}{36.0\text{ cm}} + \frac{1}{36.0\text{ cm}} = \frac{3}{36.0\text{ cm}} = \frac{1}{12.0\text{ cm}} \implies f = +12.0\text{ cm}

    You correctly recalled the thin-lens equation and carried out the common denominator arithmetic without mistake, but your final focal length is incorrect because it uses the erroneous value of dod_o from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the thin-lens formula 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

You handled the fraction addition with common denominators and solved for the reciprocal accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Magnification Ratio and Missing Sign

No, this is a conceptual mix-up regarding the definition and ratio orientation of optical magnification rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the ratio for linear magnification by placing the object distance in the numerator and omitting the minus sign, writing m=dodim = \frac{d_o}{d_i} instead of m=−didom = -\frac{d_i}{d_o}. Remember that magnification always compares the final image to the original object (m=hiho=−didom = \frac{h_i}{h_o} = -\frac{d_i}{d_o}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Linear Magnification Definition
  • In Cartesian convention for thin lenses, m=hiho=−didom = \frac{h_i}{h_o} = -\frac{d_i}{d_o}.

  • Always verify that the image parameter is in the numerator and the object parameter is in the denominator, preceded by a negative sign.

Physical Sanity Check for Real Objects
  • A single real object positioned in front of a lens has a positive object distance (do>0d_o > 0).

  • If you compute a negative dod_o for an isolated object, stop immediately to check your magnification equation or sign conventions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct magnification relation: m=−didom = -\frac{d_i}{d_o}.

  2. Substitute m=−2.00m = -2.00 and di=+36.0 cmd_i = +36.0\text{ cm}: −2.00=−36.0 cmdo  ⟹  do=36.0 cm2.00=18.0 cm-2.00 = -\frac{36.0\text{ cm}}{d_o} \implies d_o = \frac{36.0\text{ cm}}{2.00} = 18.0\text{ cm}.

  3. Substitute do=18.0 cmd_o = 18.0\text{ cm} and di=36.0 cmd_i = 36.0\text{ cm} into the thin-lens equation: 1f=118.0+136.0=336.0=112.0\frac{1}{f} = \frac{1}{18.0} + \frac{1}{36.0} = \frac{3}{36.0} = \frac{1}{12.0}.

  4. Invert to find the focal length: f=+12.0 cmf = +12.0\text{ cm}.

Final answer

(a) do=18.0 cmd_o = 18.0\text{ cm} in front of the lens; (b) f=+12.0 cmf = +12.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize magnification as 'image over object' with a minus sign: m=−didom = -\frac{d_i}{d_o}.

  • Practice checking whether your calculated object distance is positive for real physical objects.

OverviewACEpath Teacher's Diagnosis

03 The student calculates 1/f correctly as 1/12.0 in part (b) but forgets to take the reciprocal, writing f = 0.0833 cm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=−dido  ⟹  −2.00=−36.0do  ⟹  do=36.02.00=18.0 cmm = -\frac{d_i}{d_o} \implies -2.00 = -\frac{36.0}{d_o} \implies d_o = \frac{36.0}{2.00} = 18.0\text{ cm}

  2. Step 2

    1f=1do+1di  ⟹  1f=118.0+136.0=336.0=112.0\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \implies \frac{1}{f} = \frac{1}{18.0} + \frac{1}{36.0} = \frac{3}{36.0} = \frac{1}{12.0}

  3. Step 3

    f=0.0833 cmf = 0.0833\text{ cm}

    Correct

    f=12.0 cmf = 12.0\text{ cm}

    You computed the decimal value of 112.0\frac{1}{12.0} rather than inverting both sides of the equation 1f=112.0\frac{1}{f} = \frac{1}{12.0} to isolate ff.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the linear magnification equation m=−di/dom = -d_i / d_o to solve for dod_o.

You set up the thin-lens equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} accurately.

You correctly added the fractional reciprocals with a common denominator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal Omission

You evaluated 1/12.0≈0.08331/12.0 \approx 0.0833 and set it equal to ff, forgetting that the left-hand side was still 1/f1/f.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the optical power / reciprocal focal length (1/f1/f) with the focal length (ff) itself at the final algebra step.

REASONING PATH
Your ACEpath teacher’s suggested approach
Variable Isolation Check
  • The thin-lens formula gives 1f\frac{1}{f}, not ff.

  • Always take the reciprocal of both sides as the explicit final step: if 1f=1A\frac{1}{f} = \frac{1}{A}, then f=Af = A.

Physical Reasonableness & Units
  • For macroscopic laboratory optics, focal lengths are typically on the order of centimeters, not fractions of a millimeter.

  • Check if a focal length of 0.0833 cm0.0833\text{ cm} (0.833 mm0.833\text{ mm}) makes physical sense for an object at 18 cm18\text{ cm} and an image at 36 cm36\text{ cm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the reciprocal of both sides of the equation: f=(112.0 cm)−1f = \left(\frac{1}{12.0\text{ cm}}\right)^{-1}

  2. Simplify to isolate ff: f=+12.0 cmf = +12.0\text{ cm}

Final answer

(a) do=18.0 cmd_o = 18.0\text{ cm}; (b) f=+12.0 cmf = +12.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the reciprocal step explicitly by writing f=1Ansf = \frac{1}{\text{Ans}} before converting to a decimal.

  • Perform a quick mental unit and magnitude check: if dod_o and did_i are in tens of centimeters, ff should also be on the scale of centimeters.

Lock it in

Similar question

01

A converging lens creates an inverted real image that is half the height of an upright object (m=−0.50m = -0.50). The image forms at a distance of di=+30.0 cmd_i = +30.0\text{ cm} from the lens. Find the object distance dod_o and the focal length ff of the lens.

Answer

do=60.0 cmd_o = 60.0\text{ cm}, f=20.0 cmf = 20.0\text{ cm}. Using m=−didom = -\frac{d_i}{d_o}, we have −0.50=−30.0do  ⟹  do=60.0 cm-0.50 = -\frac{30.0}{d_o} \implies d_o = 60.0\text{ cm}. Applying the thin-lens equation: 1f=160.0+130.0=360.0=120.0\frac{1}{f} = \frac{1}{60.0} + \frac{1}{30.0} = \frac{3}{60.0} = \frac{1}{20.0}, so f=+20.0 cmf = +20.0\text{ cm}.

02

An upright object is placed 15.0 cm15.0\text{ cm} in front of a thin converging lens of focal length f=+10.0 cmf = +10.0\text{ cm}. Calculate the image distance did_i and the magnification mm, and describe whether the image is real or virtual, upright or inverted.

Answer

di=+30.0 cmd_i = +30.0\text{ cm}, m=−2.00m = -2.00 (real, inverted). Using the lens equation: 1di=110.0−115.0=130.0  ⟹  di=+30.0 cm\frac{1}{d_i} = \frac{1}{10.0} - \frac{1}{15.0} = \frac{1}{30.0} \implies d_i = +30.0\text{ cm}. Then magnification is m=−dido=−30.015.0=−2.00m = -\frac{d_i}{d_o} = -\frac{30.0}{15.0} = -2.00.

03

A projector lens must project a real, inverted image onto a screen located 2.40 m2.40\text{ m} away from the lens, magnifying a slide by a factor of 40.040.0 in magnitude (m=−40.0m = -40.0). Determine the exact distance between the slide and the lens, and find the focal length of the projection lens in millimeters.

Answer

do=6.00 cmd_o = 6.00\text{ cm} (0.0600 m0.0600\text{ m}), f≈58.5 mmf \approx 58.5\text{ mm}. Using m=−didom = -\frac{d_i}{d_o}, −40.0=−2.40 mdo  ⟹  do=0.0600 m=6.00 cm-40.0 = -\frac{2.40\text{ m}}{d_o} \implies d_o = 0.0600\text{ m} = 6.00\text{ cm}. Then 1f=10.0600+12.40=40+12.40=412.40 m  ⟹  f=2.4041 m≈0.0585 m=58.5 mm\frac{1}{f} = \frac{1}{0.0600} + \frac{1}{2.40} = \frac{40 + 1}{2.40} = \frac{41}{2.40\text{ m}} \implies f = \frac{2.40}{41}\text{ m} \approx 0.0585\text{ m} = 58.5\text{ mm}.

Loading workspace…