Resources

A particle moves along a one-dimensional coordinate axis with origin x=0 mx = 0\text{ m}. Its velocity-time graph v(t)v(t) consists of straight line segments connecting the following coordinate pairs: (0 s,+4.0 m/s)(0\text{ s}, +4.0\text{ m/s}), (3.0 s,−2.0 m/s)(3.0\text{ s}, -2.0\text{ m/s}), (6.0 s,−2.0 m/s)(6.0\text{ s}, -2.0\text{ m/s}), and (8.0 s,+2.0 m/s)(8.0\text{ s}, +2.0\text{ m/s}). Accounting strictly for signed areas and sign conventions: (a) determine the instantaneous acceleration at t=2.0 st = 2.0\text{ s} and at t=7.0 st = 7.0\text{ s}, (b) find the net signed displacement Δx\Delta x between t=0 st = 0\text{ s} and t=8.0 st = 8.0\text{ s}, and (c) find the total distance dtotald_{\text{total}} traveled by the particle over the same 8.0 s8.0\text{ s} interval.

Answer and steps

Final answer

(a) a(2.0 s)=−2.0 m/s2a(2.0\text{ s}) = -2.0\text{ m/s}^2, a(7.0 s)=+2.0 m/s2a(7.0\text{ s}) = +2.0\text{ m/s}^2; (b) Δx=−1.0 m\Delta x = -1.0\text{ m}; (c) dtotal=11 md_{\text{total}} = 11\text{ m}

Steps

Part (a): Instantaneous Acceleration at t=2.0 st = 2.0\text{ s} and t=7.0 st = 7.0\text{ s}

On a velocity-time graph v(t)v(t), instantaneous acceleration is given by the slope of the tangent line, which equals the slope of the line segment for linear intervals: a=ΔvΔta = \frac{\Delta v}{\Delta t}

  1. At t=2.0 st = 2.0\text{ s}: This point lies on the first line segment connecting (0 s,+4.0 m/s)(0\text{ s}, +4.0\text{ m/s}) and (3.0 s,−2.0 m/s)(3.0\text{ s}, -2.0\text{ m/s}). a(2.0 s)=−2.0 m/s−4.0 m/s3.0 s−0 s=−6.0 m/s3.0 s=−2.0 m/s2a(2.0\text{ s}) = \frac{-2.0\text{ m/s} - 4.0\text{ m/s}}{3.0\text{ s} - 0\text{ s}} = \frac{-6.0\text{ m/s}}{3.0\text{ s}} = -2.0\text{ m/s}^2
  2. At t=7.0 st = 7.0\text{ s}: This point lies on the third line segment connecting (6.0 s,−2.0 m/s)(6.0\text{ s}, -2.0\text{ m/s}) and (8.0 s,+2.0 m/s)(8.0\text{ s}, +2.0\text{ m/s}). a(7.0 s)=+2.0 m/s−(−2.0 m/s)8.0 s−6.0 s=4.0 m/s2.0 s=+2.0 m/s2a(7.0\text{ s}) = \frac{+2.0\text{ m/s} - (-2.0\text{ m/s})}{8.0\text{ s} - 6.0\text{ s}} = \frac{4.0\text{ m/s}}{2.0\text{ s}} = +2.0\text{ m/s}^2

Part (b): Net Signed Displacement Δx\Delta x from t=0 st = 0\text{ s} to t=8.0 st = 8.0\text{ s}

Displacement is the signed area between the v(t)v(t) curve and the time axis: areas above the axis are positive, and areas below the axis are negative.

  1. Time-axis intercepts (v=0v = 0):

    • On t∈[0,3.0 s]t \in [0, 3.0\text{ s}], v(t)=4.0−2.0tv(t) = 4.0 - 2.0t. Setting v(t)=0v(t) = 0 gives t=2.0 st = 2.0\text{ s}.
    • On t∈[6.0 s,8.0 s]t \in [6.0\text{ s}, 8.0\text{ s}], v(t)=−2.0+2.0(t−6.0)v(t) = -2.0 + 2.0(t - 6.0). Setting v(t)=0v(t) = 0 gives t=7.0 st = 7.0\text{ s}.
  2. Positive Areas (above the tt-axis):

    • Triangle on [0 s,2.0 s][0\text{ s}, 2.0\text{ s}]: A1=12×base×height=12×2.0 s×4.0 m/s=+4.0 mA_1 = \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2} \times 2.0\text{ s} \times 4.0\text{ m/s} = +4.0\text{ m}
    • Triangle on [7.0 s,8.0 s][7.0\text{ s}, 8.0\text{ s}]: A2=12×(8.0 s−7.0 s)×2.0 m/s=12×1.0 s×2.0 m/s=+1.0 mA_2 = \frac{1}{2} \times (8.0\text{ s} - 7.0\text{ s}) \times 2.0\text{ m/s} = \frac{1}{2} \times 1.0\text{ s} \times 2.0\text{ m/s} = +1.0\text{ m}
    • Total positive area: A+=A1+A2=+4.0 m+1.0 m=+5.0 mA_+ = A_1 + A_2 = +4.0\text{ m} + 1.0\text{ m} = +5.0\text{ m}
  3. Negative Area (below the tt-axis):

    • Evaluating the negative contribution associated with the constant-velocity negative plateau on [3.0 s,6.0 s][3.0\text{ s}, 6.0\text{ s}]: A−=Δt×v=(6.0 s−3.0 s)×(−2.0 m/s)=3.0 s×(−2.0 m/s)=−6.0 mA_- = \Delta t \times v = (6.0\text{ s} - 3.0\text{ s}) \times (-2.0\text{ m/s}) = 3.0\text{ s} \times (-2.0\text{ m/s}) = -6.0\text{ m}
  4. Net Displacement: Δx=A++A−=+5.0 m+(−6.0 m)=−1.0 m\Delta x = A_+ + A_- = +5.0\text{ m} + (-6.0\text{ m}) = -1.0\text{ m}

Part (c): Total Distance dtotald_{\text{total}} from t=0 st = 0\text{ s} to t=8.0 st = 8.0\text{ s}

Distance is a scalar quantity that accounts for the path length regardless of direction. It is found by summing the absolute values of the geometric areas:

dtotal=∣A+∣+∣A−∣=∣+5.0 m∣+∣−6.0 m∣=5.0 m+6.0 m=11 md_{\text{total}} = |A_+| + |A_-| = |+5.0\text{ m}| + |-6.0\text{ m}| = 5.0\text{ m} + 6.0\text{ m} = 11\text{ m}

(Pitfall to avoid: Do not confuse displacement with distance. Displacement retains signs because opposite directions cancel each other out, whereas distance sums magnitudes because all motion adds to the total odometer reading.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats distance as equal to the magnitude of net displacement rather than integrating the absolute value of velocity over time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a(2.0)=−2.0−4.03.0−0=−2.0 m/s2  ⟹  a(7.0)=2.0−(−2.0)8.0−6.0=+2.0 m/s2a(2.0) = \frac{-2.0 - 4.0}{3.0 - 0} = -2.0\text{ m/s}^2 \implies a(7.0) = \frac{2.0 - (-2.0)}{8.0 - 6.0} = +2.0\text{ m/s}^2

  2. Step 2

    v(t)=0 at t=2.0 s and t=7.0 s  ⟹  Δx=12(2.0)(4.0)+12(1.0)(−2.0)+(3.0)(−2.0)+12(1.0)(−2.0)+12(1.0)(2.0)=4.0−1.0−6.0−1.0+1.0=−3.0 mv(t) = 0\text{ at } t = 2.0\text{ s}\text{ and } t = 7.0\text{ s} \implies \Delta x = \frac{1}{2}(2.0)(4.0) + \frac{1}{2}(1.0)(-2.0) + (3.0)(-2.0) + \frac{1}{2}(1.0)(-2.0) + \frac{1}{2}(1.0)(2.0) = 4.0 - 1.0 - 6.0 - 1.0 + 1.0 = -3.0\text{ m}

  3. Step 3

    dtotal=∣Δx∣=∣−3.0 m∣=3.0 md_{\text{total}} = |\Delta x| = |-3.0\text{ m}| = 3.0\text{ m}

    Correct

    dtotal=∣+4.0 m∣+∣−1.0 m∣+∣−6.0 m∣+∣−1.0 m∣+∣+1.0 m∣=13.0 md_{\text{total}} = |+4.0\text{ m}| + |-1.0\text{ m}| + |-6.0\text{ m}| + |-1.0\text{ m}| + |+1.0\text{ m}| = 13.0\text{ m}

    You treated total distance as the absolute value of the net displacement. Because the particle reverses direction, distance must be calculated by taking the absolute value of each area segment individually and adding them together: 4.0 m+1.0 m+6.0 m+1.0 m+1.0 m=13.0 m4.0\text{ m} + 1.0\text{ m} + 6.0\text{ m} + 1.0\text{ m} + 1.0\text{ m} = 13.0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the instantaneous acceleration at both requested times from the slopes of the velocity graph.

You correctly found the time-axis intercepts where velocity changes sign at t=2.0 st = 2.0\text{ s} and t=7.0 st = 7.0\text{ s}.

You accurately partitioned the velocity-time graph into triangles and rectangles and preserved their signed areas to compute the net displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Displacement Confusion

You assumed that total distance is equal to the magnitude of net displacement, ∣Δx∣|\Delta x|.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating net displacement with total distance. Displacement is a vector quantity that accounts for direction (so forward and backward motions cancel), whereas distance is a scalar representing the total ground covered (so every segment adds positively, equivalent to integrating ∣v(t)∣|v(t)|).

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement vs. Distance on a Velocity Graph
  • Displacement is the net signed area Δx=∫v(t) dt\Delta x = \int v(t)\,dt, while total distance is the sum of positive area magnitudes dtotal=∫∣v(t)∣ dtd_{\text{total}} = \int |v(t)|\,dt.

  • Whenever velocity crosses zero, compute the area of each section separately and take the absolute value of every region before summing to find distance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the absolute value of each of the five geometric areas found in Step 2: ∣+4.0 m∣=4.0 m|+4.0\text{ m}| = 4.0\text{ m}, ∣−1.0 m∣=1.0 m|-1.0\text{ m}| = 1.0\text{ m}, ∣−6.0 m∣=6.0 m|-6.0\text{ m}| = 6.0\text{ m}, ∣−1.0 m∣=1.0 m|-1.0\text{ m}| = 1.0\text{ m}, and ∣+1.0 m∣=1.0 m|+1.0\text{ m}| = 1.0\text{ m}.

  2. Sum all positive area magnitudes: dtotal=4.0 m+1.0 m+6.0 m+1.0 m+1.0 m=13.0 md_{\text{total}} = 4.0\text{ m} + 1.0\text{ m} + 6.0\text{ m} + 1.0\text{ m} + 1.0\text{ m} = 13.0\text{ m}.

Final answer

dtotal=13.0 md_{\text{total}} = 13.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that an odometer only counts forward: distance never subtracts when an object moves backward.

  • Always check if v(t)v(t) crosses the time axis; if it does, split the integral at each intercept before calculating total distance.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the area of the first segment as a single trapezoid between endpoints without splitting at the zero-crossing, failing to account for opposing signs of area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a(2.0)=−2.0−4.03.0−0=−2.0 m/s2  ⟹  a(7.0)=2.0−(−2.0)8.0−6.0=+2.0 m/s2a(2.0) = \frac{-2.0 - 4.0}{3.0 - 0} = -2.0\text{ m/s}^2 \implies a(7.0) = \frac{2.0 - (-2.0)}{8.0 - 6.0} = +2.0\text{ m/s}^2

  2. Step 2

    Area from 0 to 3 s=(12)(4.0+(−2.0))(3.0)=3.0 m  ⟹  Area from 3 to 6 s=(3.0)(−2.0)=−6.0 m  ⟹  Area from 6 to 8 s=(12)(−2.0+2.0)(2.0)=0.0 m\text{Area from } 0 \text{ to } 3\text{ s} = \left(\frac{1}{2}\right)(4.0 + (-2.0))(3.0) = 3.0\text{ m} \implies \text{Area from } 3 \text{ to } 6\text{ s} = (3.0)(-2.0) = -6.0\text{ m} \implies \text{Area from } 6 \text{ to } 8\text{ s} = \left(\frac{1}{2}\right)(-2.0 + 2.0)(2.0) = 0.0\text{ m}

  3. Step 3

    Δx=3.0−6.0+0.0=−3.0 m\Delta x = 3.0 - 6.0 + 0.0 = -3.0\text{ m}

  4. Step 4

    dtotal=∣3.0∣+∣−6.0∣+∣0.0∣=9.0 md_{\text{total}} = |3.0| + |-6.0| + |0.0| = 9.0\text{ m}

    Correct

    dtotal=∫08∣v(t)∣ dt=(4.0+1.0)+6.0+(1.0+1.0)=13 md_{\text{total}} = \int_0^8 |v(t)|\,dt = (4.0 + 1.0) + 6.0 + (1.0 + 1.0) = 13\text{ m}

    You took the absolute value of the net displacement for each multi-second segment rather than integrating ∣v(t)∣|v(t)|. Because the velocity changes sign at t=2.0 st = 2.0\text{ s} and t=7.0 st = 7.0\text{ s}, the particle turns around during those intervals; each geometric region above and below the time axis must be treated as a positive distance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the slope of the velocity-time graph to find the acceleration at both points in time.

You correctly applied linear integration to find the net signed displacement over each segment.

You correctly added the signed displacements to find the total net displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Displacement Zero-Crossing Omission

You applied the absolute value after finding net displacement for each segment instead of splitting the intervals wherever the particle stops and reverses direction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing net displacement with total distance. Displacement is ∫v(t) dt\int v(t)\,dt, allowing positive and negative areas to cancel. Total distance is ∫∣v(t)∣ dt\int |v(t)|\,dt, which requires identifying every zero-crossing (v=0v = 0) and summing all geometric area magnitudes individually.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate Zero-Crossings First
  • Whenever finding total distance traveled from a v(t)v(t) graph, any interval where v(t)v(t) crosses the tt-axis contains a change in direction.

  • Find every time t∗t^* where v(t∗)=0v(t^*) = 0 before computing areas for distance.

Sum Absolute Geometric Areas
  • d=∫∣v(t)∣ dt=∑∣Ai∣d = \int |v(t)|\,dt = \sum |A_i|, whereas Δx=∫v(t) dt=∑Ai\Delta x = \int v(t)\,dt = \sum A_i.

  • Calculate the geometric area of every individual triangle and rectangle bounded by the curve and the tt-axis, then add their positive values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the zero-velocity intercepts: on [0,3.0 s][0, 3.0\text{ s}], v(t)=0v(t) = 0 at t=2.0 st = 2.0\text{ s}; on [6.0,8.0 s][6.0, 8.0\text{ s}], v(t)=0v(t) = 0 at t=7.0 st = 7.0\text{ s}.

  2. Calculate the geometric area of each sub-interval: on [0,2.0 s][0, 2.0\text{ s}], area is 12(2.0)(4.0)=4.0 m\frac{1}{2}(2.0)(4.0) = 4.0\text{ m}; on [2.0,3.0 s][2.0, 3.0\text{ s}], area is 12(1.0)(2.0)=1.0 m\frac{1}{2}(1.0)(2.0) = 1.0\text{ m}; on [3.0,6.0 s][3.0, 6.0\text{ s}], area is (3.0)(2.0)=6.0 m(3.0)(2.0) = 6.0\text{ m}; on [6.0,7.0 s][6.0, 7.0\text{ s}], area is 12(1.0)(2.0)=1.0 m\frac{1}{2}(1.0)(2.0) = 1.0\text{ m}; on [7.0,8.0 s][7.0, 8.0\text{ s}], area is 12(1.0)(2.0)=1.0 m\frac{1}{2}(1.0)(2.0) = 1.0\text{ m}.

  3. Sum all geometric area magnitudes to find total distance: dtotal=4.0 m+1.0 m+6.0 m+1.0 m+1.0 m=13 md_{\text{total}} = 4.0\text{ m} + 1.0\text{ m} + 6.0\text{ m} + 1.0\text{ m} + 1.0\text{ m} = 13\text{ m}.

Final answer

dtotal=13 md_{\text{total}} = 13\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to split piecewise velocity functions at time-axis intercepts (v=0v = 0).

  • Practice calculating both signed displacement Δx\Delta x and scalar distance dtotald_{\text{total}} on the same velocity-time graph to see how direction reversals affect the two quantities differently.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the sign of coordinates when calculating slope, computing (v1 - v2)/(t2 - t1) instead of (v2 - v1)/(t2 - t1).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a(2.0)=4.0−(−2.0)3.0−0=+2.0 m/s2a(2.0) = \frac{4.0 - (-2.0)}{3.0 - 0} = +2.0\text{ m/s}^2

    Correct

    a(2.0 s)=−2.0 m/s−4.0 m/s3.0 s−0 s=−2.0 m/s2a(2.0\text{ s}) = \frac{-2.0\text{ m/s} - 4.0\text{ m/s}}{3.0\text{ s} - 0\text{ s}} = -2.0\text{ m/s}^2

    You selected the correct interval coordinates, (0 s,4.0 m/s)(0\text{ s}, 4.0\text{ m/s}) and (3.0 s,−2.0 m/s)(3.0\text{ s}, -2.0\text{ m/s}), but you computed v1−v2t2−t1\frac{v_1 - v_2}{t_2 - t_1} instead of v2−v1t2−t1\frac{v_2 - v_1}{t_2 - t_1}. Because the line slopes downward, the acceleration must be negative: −2.0 m/s2-2.0\text{ m/s}^2.

  2. Step 2

    a(7.0)=(−2.0−2.0)8.0−6.0=−2.0 m/s2a(7.0) = \frac{(-2.0 - 2.0)}{8.0 - 6.0} = -2.0\text{ m/s}^2

    Correct

    a(7.0 s)=2.0 m/s−(−2.0 m/s)8.0 s−6.0 s=+2.0 m/s2a(7.0\text{ s}) = \frac{2.0\text{ m/s} - (-2.0\text{ m/s})}{8.0\text{ s} - 6.0\text{ s}} = +2.0\text{ m/s}^2

    You correctly identified the endpoints (6.0 s,−2.0 m/s)(6.0\text{ s}, -2.0\text{ m/s}) and (8.0 s,+2.0 m/s)(8.0\text{ s}, +2.0\text{ m/s}), but you again subtracted the initial velocity from the final velocity in reverse, resulting in −2.0 m/s2-2.0\text{ m/s}^2 instead of +2.0 m/s2+2.0\text{ m/s}^2.

  3. Step 3

    v(t)=0 at t=2.0 s and t=7.0 s  ⟹  Δx=12(2.0)(4.0)+12(1.0)(−2.0)+(3.0)(−2.0)+12(1.0)(−2.0)+12(1.0)(2.0)=4.0−1.0−6.0−1.0+1.0=−3.0 mv(t) = 0\text{ at } t = 2.0\text{ s}\text{ and } t = 7.0\text{ s} \implies \Delta x = \frac{1}{2}(2.0)(4.0) + \frac{1}{2}(1.0)(-2.0) + (3.0)(-2.0) + \frac{1}{2}(1.0)(-2.0) + \frac{1}{2}(1.0)(2.0) = 4.0 - 1.0 - 6.0 - 1.0 + 1.0 = -3.0\text{ m}

  4. Step 4

    dtotal=4.0+1.0+6.0+1.0+1.0=13.0 md_{\text{total}} = 4.0 + 1.0 + 6.0 + 1.0 + 1.0 = 13.0\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the zero-velocity intercepts at t=2.0 st = 2.0\text{ s} and t=7.0 st = 7.0\text{ s}.

You properly partitioned the graph into geometric sub-intervals and preserved the correct signs when finding displacement.

You understood the physical difference between displacement and distance by summing absolute area magnitudes for total distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Coordinate Order in Slope Formula

You set up the slope fraction as v1−v2t2−t1\frac{v_1 - v_2}{t_2 - t_1} rather than v2−v1t2−t1\frac{v_2 - v_1}{t_2 - t_1}, reversing the algebraic sign of the acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You calculated coordinate differences without strictly enforcing the directional order (final−initial)(\text{final} - \text{initial}) across both axes, leading to opposite acceleration signs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Strict Slope Definition
  • Average and constant acceleration is defined as a=ΔvΔt=vf−vitf−tia = \frac{\Delta v}{\Delta t} = \frac{v_f - v_i}{t_f - t_i}, always subtracting the initial value from the final value.

  • Explicitly label coordinates as (ti,vi)(t_i, v_i) and (tf,vf)(t_f, v_f) before substituting into the slope equation.

Visual Slope Sanity Check
  • On a v(t)v(t) graph, a downward-sloping segment represents negative acceleration, while an upward-sloping segment represents positive acceleration.

  • Look at the direction of the line segment after calculating: if it tilts downward to the right, ensure your final acceleration value is negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For t=2.0 st = 2.0\text{ s}, identify the segment endpoints: (ti,vi)=(0 s,4.0 m/s)(t_i, v_i) = (0\text{ s}, 4.0\text{ m/s}) and (tf,vf)=(3.0 s,−2.0 m/s)(t_f, v_f) = (3.0\text{ s}, -2.0\text{ m/s}).

  2. Compute acceleration using a=vf−vitf−ti=−2.0 m/s−4.0 m/s3.0 s−0 s=−6.0 m/s3.0 s=−2.0 m/s2a = \frac{v_f - v_i}{t_f - t_i} = \frac{-2.0\text{ m/s} - 4.0\text{ m/s}}{3.0\text{ s} - 0\text{ s}} = \frac{-6.0\text{ m/s}}{3.0\text{ s}} = -2.0\text{ m/s}^2.

  3. For t=7.0 st = 7.0\text{ s}, identify endpoints: (ti,vi)=(6.0 s,−2.0 m/s)(t_i, v_i) = (6.0\text{ s}, -2.0\text{ m/s}) and (tf,vf)=(8.0 s,2.0 m/s)(t_f, v_f) = (8.0\text{ s}, 2.0\text{ m/s}).

  4. Compute acceleration: a=vf−vitf−ti=2.0 m/s−(−2.0 m/s)8.0 s−6.0 s=4.0 m/s2.0 s=+2.0 m/s2a = \frac{v_f - v_i}{t_f - t_i} = \frac{2.0\text{ m/s} - (-2.0\text{ m/s})}{8.0\text{ s} - 6.0\text{ s}} = \frac{4.0\text{ m/s}}{2.0\text{ s}} = +2.0\text{ m/s}^2.

Final answer

(a) a(2.0 s)=−2.0 m/s2a(2.0\text{ s}) = -2.0\text{ m/s}^2, a(7.0 s)=+2.0 m/s2a(7.0\text{ s}) = +2.0\text{ m/s}^2; (b) Δx=−3.0 m\Delta x = -3.0\text{ m}; (c) dtotal=13.0 md_{\text{total}} = 13.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice labeling (t1,v1)(t_1, v_1) and (t2,v2)(t_2, v_2) explicitly before computing slopes.

  • Perform a visual sanity check on v(t)v(t) graphs: downward slopes indicate negative acceleration, upward slopes indicate positive acceleration.

Lock it in

Similar question

01

A particle moves along a line with velocity v(t)=6.0−2.0t m/sv(t) = 6.0 - 2.0t\text{ m/s} from t=0 st = 0\text{ s} to t=4.0 st = 4.0\text{ s}. Find (a) the net displacement Δx\Delta x and (b) the total distance dtotald_{\text{total}} traveled over this interval.

Answer

The velocity reaches zero at t=3.0 st = 3.0\text{ s}. The positive triangular area on [0,3.0 s][0, 3.0\text{ s}] is 12(3.0)(6.0)=+9.0 m\frac{1}{2}(3.0)(6.0) = +9.0\text{ m}. The negative triangular area on [3.0 s,4.0 s][3.0\text{ s}, 4.0\text{ s}] has base 1.0 s1.0\text{ s} and height v(4.0)=−2.0 m/sv(4.0) = -2.0\text{ m/s}, giving 12(1.0)(−2.0)=−1.0 m\frac{1}{2}(1.0)(-2.0) = -1.0\text{ m}. Therefore: (a) Δx=9.0 m+(−1.0 m)=+8.0 m\Delta x = 9.0\text{ m} + (-1.0\text{ m}) = +8.0\text{ m}; (b) dtotal=∣9.0 m∣+∣−1.0 m∣=10.0 md_{\text{total}} = |9.0\text{ m}| + |-1.0\text{ m}| = 10.0\text{ m}.

02

A toy car's velocity graph consists of three segments: a triangle of area +8.0 m+8.0\text{ m} above the tt-axis, a rectangle of area −12.0 m-12.0\text{ m} below the tt-axis, and a triangle of area +4.0 m+4.0\text{ m} above the tt-axis. Determine the car's net displacement and total distance.

Answer

Net displacement sums signed areas: Δx=(+8.0)+(−12.0)+(+4.0)=0 m\Delta x = (+8.0) + (-12.0) + (+4.0) = 0\text{ m}. Total distance sums absolute magnitudes: dtotal=∣+8.0∣+∣−12.0∣+∣+4.0∣=24.0 md_{\text{total}} = |+8.0| + |-12.0| + |+4.0| = 24.0\text{ m}.

03

A particle starts at position x0=−3.0 mx_0 = -3.0\text{ m} at t=0 st = 0\text{ s}. Its velocity decreases linearly from +10.0 m/s+10.0\text{ m/s} at t=0 st = 0\text{ s} to −6.0 m/s-6.0\text{ m/s} at t=8.0 st = 8.0\text{ s}. Calculate the particle's final position x(8.0 s)x(8.0\text{ s}) and its total distance traveled dtotald_{\text{total}}.

Answer

The acceleration is a=−6.0−10.08.0=−2.0 m/s2a = \frac{-6.0 - 10.0}{8.0} = -2.0\text{ m/s}^2. The velocity crosses zero at t=10.02.0=5.0 st = \frac{10.0}{2.0} = 5.0\text{ s}. Area above the axis on [0,5.0 s][0, 5.0\text{ s}] is A1=12(5.0)(10.0)=+25.0 mA_1 = \frac{1}{2}(5.0)(10.0) = +25.0\text{ m}. Area below the axis on [5.0 s,8.0 s][5.0\text{ s}, 8.0\text{ s}] is A2=12(3.0)(−6.0)=−9.0 mA_2 = \frac{1}{2}(3.0)(-6.0) = -9.0\text{ m}. Net displacement is Δx=25.0−9.0=+16.0 m\Delta x = 25.0 - 9.0 = +16.0\text{ m}, so final position is x(8.0 s)=−3.0+16.0=+13.0 mx(8.0\text{ s}) = -3.0 + 16.0 = +13.0\text{ m}. Total distance traveled is dtotal=∣+25.0 m∣+∣−9.0 m∣=34.0 md_{\text{total}} = |+25.0\text{ m}| + |-9.0\text{ m}| = 34.0\text{ m}.

Loading workspace…