Resources

A 145 g145\text{ g} baseball is pitched horizontally due south at 42.0 m/s42.0\text{ m/s}. The batter strikes the ball, propelling it due north at an angle of 35.0∘35.0^\circ above the horizontal at a speed of 48.0 m/s48.0\text{ m/s}. If the contact between the bat and the ball lasts for an elapsed time interval of Δt=1.20 ms\Delta t = 1.20\text{ ms}, calculate the magnitude of the average acceleration vector imparted to the baseball during contact.

Answer and steps

Final answer

7.18×104 m/s27.18 \times 10^4\text{ m/s}^2

Steps

01

Define a Coordinate System

Choose a two-dimensional Cartesian coordinate system:

  • Let the positive xx-direction point horizontally due North (so due South is the negative xx-direction).
  • Let the positive yy-direction point vertically Upward.
02

Express Initial and Final Velocities in Component Form

  • Initial Velocity (v⃗i\vec{v}_i):
    The baseball is pitched horizontally due south at 42.0 m/s42.0\text{ m/s}: vix=−42.0 m/s,viy=0 m/sv_{ix} = -42.0\text{ m/s}, \quad v_{iy} = 0\text{ m/s} v⃗i=−42.0 i^ m/s\vec{v}_i = -42.0\,\hat{i}\text{ m/s}
  • Final Velocity (v⃗f\vec{v}_f):
    The ball is batted due north at an angle of 35.0∘35.0^\circ above the horizontal at 48.0 m/s48.0\text{ m/s}: vfx=48.0cos⁡(35.0∘)≈48.0⋅0.8192≈39.32 m/sv_{fx} = 48.0 \cos(35.0^\circ) \approx 48.0 \cdot 0.8192 \approx 39.32\text{ m/s} vfy=48.0sin⁡(35.0∘)≈48.0⋅0.5736≈27.53 m/sv_{fy} = 48.0 \sin(35.0^\circ) \approx 48.0 \cdot 0.5736 \approx 27.53\text{ m/s} v⃗f=39.32 i^+27.53 j^ m/s\vec{v}_f = 39.32\,\hat{i} + 27.53\,\hat{j}\text{ m/s}
03

Determine the Change in Velocity Vector (Δv⃗\Delta \vec{v})

The change in velocity is given by Δv⃗=v⃗f−v⃗i\Delta \vec{v} = \vec{v}_f - \vec{v}_i:

  • Horizontal component: Δvx=vfx−vix=39.32 m/s−(−42.0 m/s)=81.32 m/s\Delta v_x = v_{fx} - v_{ix} = 39.32\text{ m/s} - (-42.0\text{ m/s}) = 81.32\text{ m/s}
  • Vertical component: Δvy=vfy−viy=27.53 m/s−0 m/s=27.53 m/s\Delta v_y = v_{fy} - v_{iy} = 27.53\text{ m/s} - 0\text{ m/s} = 27.53\text{ m/s}

Common Pitfall: Because the horizontal direction reverses from south to north, the initial and final horizontal velocities have opposite signs. Forgetting the negative sign for the south direction leads to subtracting the speeds rather than adding them.

04

Calculate the Magnitude of the Average Acceleration

The average acceleration vector is defined as: a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta \vec{v}}{\Delta t}

First, find the components of the average acceleration using Δt=1.20 ms=1.20×10−3 s\Delta t = 1.20\text{ ms} = 1.20 \times 10^{-3}\text{ s}: aavg,x=ΔvxΔt=81.32 m/s1.20×10−3 s≈6.777×104 m/s2a_{\text{avg}, x} = \frac{\Delta v_x}{\Delta t} = \frac{81.32\text{ m/s}}{1.20 \times 10^{-3}\text{ s}} \approx 6.777 \times 10^4\text{ m/s}^2 aavg,y=ΔvyΔt=27.53 m/s1.20×10−3 s≈2.294×104 m/s2a_{\text{avg}, y} = \frac{\Delta v_y}{\Delta t} = \frac{27.53\text{ m/s}}{1.20 \times 10^{-3}\text{ s}} \approx 2.294 \times 10^4\text{ m/s}^2

Now, compute the overall magnitude: aavg=(aavg,x)2+(aavg,y)2a_{\text{avg}} = \sqrt{(a_{\text{avg}, x})^2 + (a_{\text{avg}, y})^2} aavg=(6.777×104)2+(2.294×104)2≈7.18×104 m/s2a_{\text{avg}} = \sqrt{(6.777 \times 10^4)^2 + (2.294 \times 10^4)^2} \approx 7.18 \times 10^4\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the initial and final horizontal speeds as if they were in the same direction instead of recognizing north and south as opposite signs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vfy=48.0⋅cos⁡(35.0∘)=39.32 m/s  ⟹  vfz=48.0⋅sin⁡(35.0∘)=27.53 m/sv_{fy} = 48.0 \cdot \cos(35.0^\circ) = 39.32\text{ m/s} \implies v_{fz} = 48.0 \cdot \sin(35.0^\circ) = 27.53\text{ m/s}

  2. Step 2

    Δvy=39.32−42.0=−2.68 m/s\Delta v_y = 39.32 - 42.0 = -2.68\text{ m/s}

    Correct

    Δvx=vfx−vix=39.32−(−42.0)=81.32 m/s\Delta v_x = v_{fx} - v_{ix} = 39.32 - (-42.0) = 81.32\text{ m/s}

    The ball was initially traveling due south and rebounded due north. Because south and north are opposite directions along the same axis, their velocity components have opposite signs. Setting north as positive gives vix=−42.0 m/sv_{ix} = -42.0\text{ m/s}, so Δvx=39.32 m/s−(−42.0 m/s)=81.32 m/s\Delta v_x = 39.32\text{ m/s} - (-42.0\text{ m/s}) = 81.32\text{ m/s}.

  3. Step 3

    Δv=(−2.68)2+27.532=27.66 m/s\Delta v = \sqrt{(-2.68)^2 + 27.53^2} = 27.66\text{ m/s}

    Correct

    Δv=(81.32)2+(27.53)2≈85.85 m/s\Delta v = \sqrt{(81.32)^2 + (27.53)^2} \approx 85.85\text{ m/s}

    You used the correct Pythagorean formula to calculate the magnitude of the velocity change vector, but your result is affected by the incorrect horizontal change from the previous step.

  4. Step 4

    aavg=27.661.20×10−3=2.31×104 m/s2a_{\text{avg}} = \frac{27.66}{1.20 \times 10^{-3}} = 2.31 \times 10^4\text{ m/s}^2

    Correct

    aavg=85.85 m/s1.20×10−3 s≈7.18×104 m/s2a_{\text{avg}} = \frac{85.85\text{ m/s}}{1.20 \times 10^{-3}\text{ s}} \approx 7.18 \times 10^4\text{ m/s}^2

    You correctly divided your velocity change by the elapsed time in seconds, but the numerical answer inherits the earlier sign error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the final velocity into horizontal and vertical components using trigonometric functions.

You correctly set up the Pythagorean theorem to find the magnitude of the 2D velocity change vector.

You correctly converted milliseconds to seconds when dividing by the elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Vector Subtraction

You subtracted the scalar speeds along the horizontal axis without assigning opposite signs to opposite directions (north vs. south).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Velocity is a vector quantity that requires defining a positive direction along each coordinate axis. When an object reverses direction along an axis, the final and initial velocity components have opposite signs, meaning Δv=vf−vi=vf−(−∣vi∣)=vf+∣vi∣\Delta v = v_f - v_i = v_f - (-|v_i|) = v_f + |v_i|.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction Reversal Rule
  • Along any coordinate axis, reversing direction requires assigning opposite algebraic signs to initial and final velocity components.

  • Explicitly define a coordinate axis (e.g., North =+x= +x, South =−x= -x) before calculating Δv=vf−vi\Delta v = v_f - v_i.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Define the positive horizontal axis pointing due north, so vix=−42.0 m/sv_{ix} = -42.0\text{ m/s} and vfx=39.32 m/sv_{fx} = 39.32\text{ m/s}.

  2. Calculate the horizontal velocity change: Δvx=vfx−vix=39.32−(−42.0)=81.32 m/s\Delta v_x = v_{fx} - v_{ix} = 39.32 - (-42.0) = 81.32\text{ m/s}.

  3. Calculate the total velocity change magnitude: ∣Δv⃗∣=(81.32)2+(27.53)2≈85.85 m/s|\Delta \vec{v}| = \sqrt{(81.32)^2 + (27.53)^2} \approx 85.85\text{ m/s}.

  4. Calculate the average acceleration: aavg=85.85 m/s1.20×10−3 s≈7.18×104 m/s2a_{\text{avg}} = \frac{85.85\text{ m/s}}{1.20 \times 10^{-3}\text{ s}} \approx 7.18 \times 10^4\text{ m/s}^2.

Final answer

7.18×104 m/s27.18 \times 10^4\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a coordinate frame and write out the signed components for both v⃗i\vec{v}_i and v⃗f\vec{v}_f before computing Δv⃗\Delta \vec{v}.

  • Practice vector subtraction problems involving rebounds or direction reversals to reinforce using double negatives (vf−(−vi)v_f - (-v_i)).

OverviewACEpath Teacher's Diagnosis

02 The student treats velocity change as a scalar difference of speeds rather than a vector subtraction before calculating acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δv=48.0−42.0=6.0 m/s\Delta v = 48.0 - 42.0 = 6.0\text{ m/s}

    Correct

    v⃗i=−42.0i^ m/s\vec{v}_i = -42.0\hat{i}\text{ m/s}, v⃗f=48.0cos⁡(35.0∘)i^+48.0sin⁡(35.0∘)j^ m/s  ⟹  Δv⃗=v⃗f−v⃗i≈81.32i^+27.53j^ m/s\vec{v}_f = 48.0\cos(35.0^\circ)\hat{i} + 48.0\sin(35.0^\circ)\hat{j}\text{ m/s} \implies \Delta\vec{v} = \vec{v}_f - \vec{v}_i \approx 81.32\hat{i} + 27.53\hat{j}\text{ m/s}

    You subtracted the initial speed directly from the final speed as scalars. Because velocity is a vector and the ball changes direction from south to north at an upward angle, you need to break the velocities into horizontal and vertical components before calculating Δv⃗=v⃗f−v⃗i\Delta\vec{v} = \vec{v}_f - \vec{v}_i.

  2. Step 2

    Δt=1.20∗10−3 s\Delta t = 1.20 * 10^{-3}\text{ s}

  3. Step 3

    aavg=6.0/(1.20∗10−3)=5000 m/s2a_{\text{avg}} = 6.0 / (1.20 * 10^{-3}) = 5000\text{ m/s}^2

    Correct

    aavg=∣Δv⃗∣Δt=(81.32)2+(27.53)21.20×10−3≈7.18×104 m/s2a_{\text{avg}} = \frac{|\Delta\vec{v}|}{\Delta t} = \frac{\sqrt{(81.32)^2 + (27.53)^2}}{1.20 \times 10^{-3}} \approx 7.18 \times 10^4\text{ m/s}^2

    You carried out the division correctly using your value for Δv\Delta v, but the result was thrown off by the earlier scalar subtraction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that average acceleration involves dividing velocity change by contact time.

You accurately converted the time interval Δt\Delta t from milliseconds to seconds.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar vs vector treatment

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated velocity change as the scalar difference between the two speeds (vf−viv_f - v_i) instead of performing vector subtraction (v⃗f−v⃗i\vec{v}_f - \vec{v}_i) with two-dimensional directional components.

REASONING PATH
Your ACEpath teacher’s suggested approach
Velocity is a Vector
  • Acceleration is defined as a⃗avg=Δv⃗Δt=v⃗f−v⃗iΔt\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t} = \frac{\vec{v}_f - \vec{v}_i}{\Delta t}, requiring vector components when directions change.

  • Always set up coordinate axes, resolve each velocity into xx and yy components, and compute Δvx=vfx−vix\Delta v_x = v_{fx} - v_{ix} and Δvy=vfy−viy\Delta v_y = v_{fy} - v_{iy}.

Magnitude of a 2D Vector
  • The magnitude of a vector A⃗=Axi^+Ayj^\vec{A} = A_x\hat{i} + A_y\hat{j} is ∣A⃗∣=Ax2+Ay2|\vec{A}| = \sqrt{A_x^2 + A_y^2}.

  • Find the total magnitude using the Pythagorean theorem on the perpendicular components before or after dividing by Δt\Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up a coordinate frame: let +i^+\hat{i} be north and +j^+\hat{j} be upward.

  2. Write the initial velocity vector: v⃗i=−42.0i^ m/s\vec{v}_i = -42.0\hat{i}\text{ m/s}.

  3. Resolve the final velocity into components: vfx=48.0cos⁡(35.0∘)≈39.32 m/sv_{fx} = 48.0\cos(35.0^\circ) \approx 39.32\text{ m/s} and vfy=48.0sin⁡(35.0∘)≈27.53 m/sv_{fy} = 48.0\sin(35.0^\circ) \approx 27.53\text{ m/s}.

  4. Compute Δv⃗=v⃗f−v⃗i=[39.32−(−42.0)]i^+[27.53−0]j^=81.32i^+27.53j^ m/s\Delta\vec{v} = \vec{v}_f - \vec{v}_i = [39.32 - (-42.0)]\hat{i} + [27.53 - 0]\hat{j} = 81.32\hat{i} + 27.53\hat{j}\text{ m/s}.

  5. Calculate the magnitude: ∣Δv⃗∣=81.322+27.532≈86.17 m/s|\Delta\vec{v}| = \sqrt{81.32^2 + 27.53^2} \approx 86.17\text{ m/s}.

  6. Divide by Δt\Delta t: aavg=86.17 m/s1.20×10−3 s≈7.18×104 m/s2a_{\text{avg}} = \frac{86.17\text{ m/s}}{1.20 \times 10^{-3}\text{ s}} \approx 7.18 \times 10^4\text{ m/s}^2.

Final answer

7.18×104 m/s27.18 \times 10^4\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • When a moving object rebounds or bounces off at an angle, always sketch the initial and final velocity vectors on coordinate axes first.

  • Practice resolving oblique velocity vectors into horizontal and vertical components before computing changes in momentum or acceleration.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the time interval from milliseconds to seconds, leading to an acceleration that is three orders of magnitude too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vfy=48.0∗cos⁡(35.0∘)=39.32 m/s  ⟹  vfz=48.0∗sin⁡(35.0∘)=27.53 m/sv_{fy} = 48.0 * \cos(35.0^\circ) = 39.32\text{ m/s} \implies v_{fz} = 48.0 * \sin(35.0^\circ) = 27.53\text{ m/s}

  2. Step 2

    Δvy=39.32−(−42.0)=81.32 m/s  ⟹  ∣Δv∣=81.322+27.532=85.85 m/s\Delta v_y = 39.32 - (-42.0) = 81.32\text{ m/s} \implies |\Delta v| = \sqrt{81.32^2 + 27.53^2} = 85.85\text{ m/s}

  3. Step 3

    aavg=85.851.20=71.5 m/s2a_{\text{avg}} = \frac{85.85}{1.20} = 71.5\text{ m/s}^2

    Correct

    aavg=∣Δv⃗∣Δt=85.85 m/s1.20×10−3 s≈7.15×104 m/s2a_{\text{avg}} = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{85.85\text{ m/s}}{1.20 \times 10^{-3}\text{ s}} \approx 7.15 \times 10^4\text{ m/s}^2

    You divided by 1.201.20 directly without converting Δt=1.20 ms\Delta t = 1.20\text{ ms} into SI units (1.20×10−3 s1.20 \times 10^{-3}\text{ s}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the final velocity into horizontal and vertical components using trigonometry.

You correctly handled vector subtraction by recognizing that reversing direction from south to north requires a sign change.

You calculated the total magnitude of the velocity change vector accurately using the Pythagorean theorem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (milliseconds to seconds)

You substituted the numerical value of time as 1.201.20 instead of converting milliseconds to seconds (1.20 ms=1.20×10−3 s1.20\text{ ms} = 1.20 \times 10^{-3}\text{ s}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given time value as already expressed in base SI units (exts ext{s}) rather than checking the metric prefix 'm' (milli-), causing an error of a factor of 10310^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI base units before calculation
  • Standard kinematic formulas like a=ΔvΔta = \frac{\Delta v}{\Delta t} require time in seconds (s\text{s}) to yield acceleration in m/s2\text{m/s}^2.

  • Always convert metric prefixes such as milliseconds to seconds (1 ms=10−3 s1\text{ ms} = 10^{-3}\text{ s}) before substituting them into kinematic equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the time interval to seconds: Δt=1.20 ms=1.20×10−3 s\Delta t = 1.20\text{ ms} = 1.20 \times 10^{-3}\text{ s}.

  2. Divide the magnitude of velocity change by the elapsed time: aavg=∣Δv⃗∣Δt=85.85 m/s1.20×10−3 sa_{\text{avg}} = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{85.85\text{ m/s}}{1.20 \times 10^{-3}\text{ s}}.

  3. Compute the final value: aavg≈7.15×104 m/s2a_{\text{avg}} \approx 7.15 \times 10^4\text{ m/s}^2 (or 7.18×104 m/s27.18 \times 10^4\text{ m/s}^2 using unrounded components).

Final answer

7.18×104 m/s27.18 \times 10^4\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out unit labels next to each variable during substitution to catch non-base prefixes like ms\text{ms} or cm\text{cm}.

  • Sanity check: Collisions involving bats, clubs, or rackets last only milliseconds, producing very large accelerations (typically 104 to 105 m/s210^4\text{ to }10^5\text{ m/s}^2).

Lock it in

Similar question

01

A 0.20 kg0.20\text{ kg} rubber ball is dropped vertically downward, hitting the floor at 8.0 m/s8.0\text{ m/s}. It rebounds vertically upward at 6.0 m/s6.0\text{ m/s}. The collision with the floor lasts for 5.0 ms5.0\text{ ms}. Calculate the magnitude of the average acceleration of the ball during contact.

Answer

2.8×103 m/s22.8 \times 10^3\text{ m/s}^2. Taking upward as positive: vi=−8.0 m/sv_i = -8.0\text{ m/s}, vf=+6.0 m/sv_f = +6.0\text{ m/s}. Then Δv=6.0−(−8.0)=14.0 m/s\Delta v = 6.0 - (-8.0) = 14.0\text{ m/s}. Average acceleration a=14.0 m/s5.0×10−3 s=2.8×103 m/s2a = \frac{14.0\text{ m/s}}{5.0 \times 10^{-3}\text{ s}} = 2.8 \times 10^3\text{ m/s}^2.

02

A hockey puck slides due East at 15.0 m/s15.0\text{ m/s}. A player strikes the puck, causing it to travel due North at 20.0 m/s20.0\text{ m/s}. If the stick-puck contact lasts for 25.0 ms25.0\text{ ms}, find the magnitude of the average acceleration vector.

Answer

1.00×103 m/s21.00 \times 10^3\text{ m/s}^2. In component form with East as +x+x and North as +y+y: v⃗i=15.0 i^ m/s\vec{v}_i = 15.0\,\hat{i}\text{ m/s} and v⃗f=20.0 j^ m/s\vec{v}_f = 20.0\,\hat{j}\text{ m/s}. Thus Δv⃗=−15.0 i^+20.0 j^ m/s\Delta \vec{v} = -15.0\,\hat{i} + 20.0\,\hat{j}\text{ m/s}. Magnitude ∣Δv⃗∣=(−15.0)2+(20.0)2=25.0 m/s|\Delta \vec{v}| = \sqrt{(-15.0)^2 + (20.0)^2} = 25.0\text{ m/s}. Average acceleration a=25.00.0250=1.00×103 m/s2a = \frac{25.0}{0.0250} = 1.00 \times 10^3\text{ m/s}^2.

03

A soccer ball is kicked towards a wall at 25.0 m/s25.0\text{ m/s} at an angle of 30.0∘30.0^\circ to the normal of the wall. It rebounds at 20.0 m/s20.0\text{ m/s} at an angle of 45.0∘45.0^\circ on the other side of the normal. If contact with the wall lasts 12.0 ms12.0\text{ ms}, calculate the magnitude of the ball's average acceleration during the rebound.

Answer

3.01×103 m/s23.01 \times 10^3\text{ m/s}^2. Let the normal to the wall be the xx-axis (pointing away from wall) and parallel to the wall be the yy-axis. Incoming: vix=−25.0cos⁡(30.0∘)≈−21.65 m/sv_{ix} = -25.0\cos(30.0^\circ) \approx -21.65\text{ m/s}, viy=25.0sin⁡(30.0∘)=12.50 m/sv_{iy} = 25.0\sin(30.0^\circ) = 12.50\text{ m/s}. Outgoing: vfx=20.0cos⁡(45.0∘)≈14.14 m/sv_{fx} = 20.0\cos(45.0^\circ) \approx 14.14\text{ m/s}, vfy=20.0sin⁡(45.0∘)≈14.14 m/sv_{fy} = 20.0\sin(45.0^\circ) \approx 14.14\text{ m/s}. Therefore, Δvx=14.14−(−21.65)=35.79 m/s\Delta v_x = 14.14 - (-21.65) = 35.79\text{ m/s}, Δvy=14.14−12.50=1.64 m/s\Delta v_y = 14.14 - 12.50 = 1.64\text{ m/s}. Total ∣Δv⃗∣=(35.79)2+(1.64)2≈35.83 m/s|\Delta \vec{v}| = \sqrt{(35.79)^2 + (1.64)^2} \approx 35.83\text{ m/s}. Average acceleration a=35.83 m/s12.0×10−3 s≈3.01×103 m/s2a = \frac{35.83\text{ m/s}}{12.0 \times 10^{-3}\text{ s}} \approx 3.01 \times 10^3\text{ m/s}^2.

Loading workspace…