Resources
A manufacturing laboratory produces two chemical buffer solutions, Solution and Solution . Each liter of Solution requires of reagent and of reagent , while each liter of Solution requires of reagent and of reagent . The laboratory has at most of reagent and at most of reagent available per day. Let represent the volume in liters of Solution produced daily, and let represent the volume in liters of Solution produced daily. Define the system of linear inequalities modeling these resource constraints, including non-negativity restrictions, and determine the maximum volume (in ) of Solution that can be synthesized if exactly of Solution are produced.
Answer and steps
Final answer
System of constraints: , , , ; Maximum volume of Solution :
Steps
Identify the Variables and Units
Let:
- be the volume of Solution produced in liters ().
- be the volume of Solution produced in liters ().
Because production volumes cannot be negative, we have the non-negativity constraints:
Formulate the Resource Constraints
Each reagent has an upper limit per day:
-
Reagent constraint:
- Solution uses .
- Solution uses .
- The laboratory has at most available.
-
Reagent constraint:
- Solution uses .
- Solution uses .
- The laboratory has at most available.
Combining these gives the complete system of inequalities:
Calculate the Maximum Volume of Solution when
Substitute into both reagent constraints to find the allowable values for :
- For Reagent :
- For Reagent :
Determine the Limiting Constraint
To satisfy both constraints simultaneously, must satisfy both and , which means:
Common Pitfall: Evaluating only one constraint (such as Reagent ) would give an overly optimistic result of . The production of Solution is restricted by the reagent that runs out first—in this case, Reagent .
Therefore, the maximum volume of Solution that can be synthesized is .
Typical errors
01 The student sets up the inequalities by grouping coefficients by solution rather than by shared reagent.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
3x + 2y 18, \quad x + 4y 24, \quad x 0, , y 0
Correct3x + y 18, \quad 2x + 4y 24, \quad x 0, , y 0
You placed both reagent requirements for Solution ( of and of ) into the first inequality, and both requirements for Solution ( of and of ) into the second. Each inequality must track one shared resource: Reagent uses per liter of and per liter of (), while Reagent uses per liter of and per liter of ().
- Step 2
3(4) + 2y 18 12 + 2y 18 2y 6 y 3 \quad \quad 4 + 4y 24 4y 20 y 5
Correct3(4) + y 18 y 6 \quad \quad 2(4) + 4y 24 8 + 4y 24 4y 16 y 4
You solved your inequalities accurately after substituting , but the resulting upper bounds were affected by the setup error in Step 1.
- Step 3
B = 3
CorrectB = 4
You correctly took the more restrictive bound , but with the correct constraints and , the maximum volume is .
WHAT YOU DID WELL
Compliments from Your TeacherYou included both non-negativity constraints and .
You correctly substituted into each linear inequality and solved for without arithmetic slips.
You understood that the maximum possible volume is determined by the more restrictive (smaller) upper bound.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou paired the coefficients by product (putting Solution 's requirements together as and Solution 's requirements together as ) rather than setting up each inequality around a single limited shared resource (Reagent total and Reagent total ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Build inequalities by resource, not by product
Each constraint row must account for a single scarce resource: .
Create a table with resources as rows and products as columns before writing inequalities. Read across each resource row to write that resource's constraint.
CORRECTED PATH
ACEpath Teacher's DemonstrationRe-formulate the constraints by reagent: Reagent gives and Reagent gives .
Substitute into the Reagent inequality: .
Substitute into the Reagent inequality: .
Find the limiting constraint by taking the intersection: .
02 The student checks only the constraint for reagent X and overlooks the stricter limitation imposed by reagent Y.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
and
You substituted into the constraint for Reagent , but you also need to substitute into the constraint for Reagent because both resources must be available simultaneously.
- Step 3Correct
Because Reagent restricts to at most , producing would require of Reagent , exceeding the daily limit.
WHAT YOU DID WELL
Compliments from Your TeacherYou translated the problem statement into accurate linear inequalities for both reagents.
You included the required non-negativity restrictions and .
You correctly substituted and solved the linear inequality for Reagent .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stopped after solving the first inequality instead of testing all constraints in the system.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn linear programming and constraint modeling, a feasible solution must satisfy every inequality in the system simultaneously. The maximum possible value is governed by the tightest (limiting) constraint, so omitting any constraint can lead to an infeasible solution.
REASONING PATH
Your ACEpath teacher’s suggested approach- Substitute into all relevant constraints
For a fixed variable value, all upper-bound inequalities in the system restrict the remaining variable.
Plug the given value into every constraint involving that variable, not just the first one.
- Identify the limiting bound
If multiple upper bounds apply, the true feasible bound is .
Compare the resulting bounds and select the smallest upper bound as your maximum allowable value.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute into : .
Subtract from both sides: .
Divide by : .
Combine the two upper bounds: and , which gives .
03 The student calculates the upper bounds from both constraints but mistakenly chooses the larger value instead of the feasible intersection.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
, , ,
- Step 2
and
- Step 3Correct
To satisfy both resource constraints simultaneously, must be less than or equal to both and . Producing of Solution would require of reagent , which exceeds the available .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up the linear inequality system including non-negativity conditions.
You accurately substituted and solved both linear inequalities for .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen multiple constraints require a variable to be less than or equal to different values ( and ), all constraints must hold at the same time. The feasible region is the intersection of these sets, so the upper limit is dictated by the most restrictive (minimum) upper bound, not the largest number.
REASONING PATH
Your ACEpath teacher’s suggested approach- Simultaneous Feasibility
If and , then .
Check your proposed answer against both original constraints to ensure neither available resource is exceeded.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that both inequalities and must hold simultaneously.
Find the intersection of the two conditions: .
State the maximum allowable volume: .
Lock it in
In a linear programming problem, how do you determine which values form a single constraint inequality?
Group all contributions to a single limited resource on the left, bounded by that resource's total limit on the right.
Similar question
A bakery makes cakes () and pies (). Each cake requires of flour and eggs. Each pie requires of flour and eggs. The baker has of flour and eggs. Write the resource constraint system (including non-negativity) and find the maximum number of pies if cakes are baked.
Answer
Flour constraint: ; Egg constraint: ; Non-negativity: . Substituting : , and . Maximum pies: .
A workshop crafts chairs () and tables (). Making a chair requires of assembly and of finishing. Making a table requires of assembly and of finishing. There are of assembly time and of finishing time available. If chairs are produced, determine the maximum number of tables that can be completed.
Answer
Assembly: ; Finishing: ; with . Substituting : ; and . The maximum number of tables is .
A farm produces standard feed () and premium feed (). Each ton of standard feed requires of additive A, of additive B, and of additive C. Each ton of premium feed requires of additive A, of additive B, and of additive C. Available daily: of A, of B, and of C. If tons of standard feed are produced daily, find the maximum tonnage of premium feed possible.
Answer
Constraints: (Additive A), (Additive B), (Additive C), and . For : Additive A gives ; Additive B gives ; Additive C gives . Maximum premium feed is .