Resources

An agricultural supplier blends two varieties of bulk fertilizer: Brand X containing 18%18\% nitrogen by mass, and Brand Y containing 30%30\% nitrogen by mass. The supplier receives an order for 1,200 kg1{,}200\text{ kg} of a custom mixture containing an overall nitrogen concentration of 21%21\% by mass. Instead of calculating the individual masses, define the variables and set up the system of linear equations that models the total mass and total nitrogen content, and solve for the target mass ratio xy\frac{x}{y} of Brand X to Brand Y used in the blend.

Answer and steps

Final answer

Let xx be the mass in kilograms of Brand X and yy be the mass in kilograms of Brand Y. The system of equations is: {x+y=1,2000.18x+0.30y=0.21(1,200)\begin{cases} x + y = 1{,}200 \\ 0.18x + 0.30y = 0.21(1{,}200) \end{cases}. Solving gives x=900 kgx = 900\text{ kg} and y=300 kgy = 300\text{ kg}, yielding the target mass ratio xy=900300=3\frac{x}{y} = \frac{900}{300} = 3 (or 3:13:1).

Steps

01

Define the Variables

Let:

  • xx represent the mass (in kilograms) of Brand X fertilizer used in the mixture.
  • yy represent the mass (in kilograms) of Brand Y fertilizer used in the mixture.

02

Set Up the System of Linear Equations

The blend involves two independent constraints: total mass and total nitrogen content.

  1. Total Mass Equation:
    The sum of the masses of Brand X and Brand Y must equal the required total mass of 1,200 kg1{,}200\text{ kg}: x+y=1,200x + y = 1{,}200
  2. Total Nitrogen Equation:
    Brand X contributes 18%18\% of its mass as pure nitrogen (0.18x0.18x), and Brand Y contributes 30%30\% of its mass as pure nitrogen (0.30y0.30y). The resulting mixture must contain 21%21\% nitrogen of the total 1,200 kg1{,}200\text{ kg}: 0.18x+0.30y=0.21(1,200)0.18x + 0.30y = 0.21(1{,}200) 0.18x+0.30y=2520.18x + 0.30y = 252

Combining these gives the system of linear equations: {x+y=1,200,0.18x+0.30y=252\lbrace x + y = 1{,}200, \quad 0.18x + 0.30y = 252

Common Pitfall: Be careful to multiply the target percentage (21%21\%) by the total mixture mass (1,200 kg1{,}200\text{ kg}) on the right-hand side. Writing just 0.210.21 equates total mass of nitrogen to a percentage fraction rather than an actual mass in kilograms.


03

Solve the System for xx and yy

From the total mass equation, express xx in terms of yy: x=1,200−yx = 1{,}200 - y

Substitute this into the nitrogen equation: 0.18(1,200−y)+0.30y=2520.18(1{,}200 - y) + 0.30y = 252 216−0.18y+0.30y=252216 - 0.18y + 0.30y = 252 0.12y=252−2160.12y = 252 - 216 0.12y=360.12y = 36 y=360.12=300 kgy = \frac{36}{0.12} = 300\text{ kg}

Now substitute y=300y = 300 back to find xx: x=1,200−300=900 kgx = 1{,}200 - 300 = 900\text{ kg}


04

Determine the Target Mass Ratio xy\frac{x}{y}

Divide the mass of Brand X by the mass of Brand Y: xy=900300=3\frac{x}{y} = \frac{900}{300} = 3

The target mass ratio of Brand X to Brand Y is 33 (or 3:13:1).

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student sets up the ratio upside down as y/x instead of x/y, leading to a reciprocal ratio of 1/3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Let x=mass of Brand X in kg, y=mass of Brand Y in kgx = \text{mass of Brand X in kg},\ y = \text{mass of Brand Y in kg}

  2. Step 2

    x+y=1200x + y = 1200, 0.18x+0.30y=0.21(1200)0.18x + 0.30y = 0.21(1200)

  3. Step 3

    0.18x+0.30y=0.21(x+y)  ⟹  0.09y=0.03x0.18x + 0.30y = 0.21(x + y) \implies 0.09y = 0.03x

  4. Step 4

    xy=0.030.09=13\frac{x}{y} = \frac{0.03}{0.09} = \frac{1}{3}

    Correct

    xy=0.090.03=3\frac{x}{y} = \frac{0.09}{0.03} = 3

    When rearranging 0.09y=0.03x0.09y = 0.03x to find xy\frac{x}{y}, dividing both sides by 0.03y0.03y gives xy=0.090.03=3\frac{x}{y} = \frac{0.09}{0.03} = 3. You inverted the numerator and denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly defined both variables with appropriate units.

You accurately translated the real-world mass and concentration constraints into a system of equations.

You cleverly eliminated the need to calculate individual masses by substituting x+yx + y for the total mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coefficient Inversion in Ratio Isolation

You matched the coefficient of xx (0.030.03) to the numerator of xy\frac{x}{y} instead of dividing through algebraically.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the position of coefficients when rearranging an equation of the form Ay=BxA y = B x into a ratio xy\frac{x}{y}, failing to verify the cross-multiplication identity 0.09⋅y=0.03⋅x0.09 \cdot y = 0.03 \cdot x.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-Multiplication Check
  • For any equation Ay=BxA y = B x, dividing both sides by ByB y yields xy=AB\frac{x}{y} = \frac{A}{B}.

  • Always cross-multiply your final fraction back (x⋅B=y⋅Ax \cdot B = y \cdot A) to confirm it matches your starting line.

Sense-Check Mixture Weighting
  • The final blend percentage (21%21\%) is much closer to Brand X (18%18\%) than Brand Y (30%30\%).

  • Verify that the component closer to the mixture's target concentration has the larger share, meaning xy>1\frac{x}{y} > 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides of the equation by yy: 0.09=0.03(xy)0.09 = 0.03 \left(\frac{x}{y}\right)

  2. Divide both sides by 0.030.03: xy=0.090.03\frac{x}{y} = \frac{0.09}{0.03}

  3. Simplify the fraction: xy=3\frac{x}{y} = 3

Final answer

3 (or 3 : 1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice cross-multiplying ratios to build muscle memory when isolating xy\frac{x}{y} from Ay=BxAy = Bx.

  • Perform a quick concentration sense-check: since 21%21\% is closer to 18%18\% than 30%30\%, Brand X must make up the majority of the mixture.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert percentages to decimals or fractional amounts for the mixture concentration on the right side, writing 21(1200) instead of 0.21(1200).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Let \text{Let } x = mass of Brand X in kg\text{mass of Brand X in kg},\ y = mass of Brand Y in kg\text{mass of Brand Y in kg}   ⟹  \implies x + y = 1200

  2. Step 2

    0.18x + 0.30y = 21(1200)   ⟹  \implies 0.18x + 0.30y = 25200

    Correct

    0.18x + 0.30y = 0.21(1{,}200)   ⟹  \implies 0.18x + 0.30y = 252

    You converted 18%18\% and 30%30\% to decimals on the left-hand side, but kept 21%21\% as 2121 on the right-hand side. Both sides of the equation must use consistent units; 21%21\% of 1,200 kg1{,}200\text{ kg} is 0.21×1,200=252 kg0.21 \times 1{,}200 = 252\text{ kg} of pure nitrogen, not 25,200 kg25{,}200\text{ kg}.

  3. Step 3

    0.18x + 0.30(1200 - x) = 25200   ⟹  \implies -0.12x + 360 = 25200   ⟹  \implies -0.12x = 24840   ⟹  \implies x = -207000   ⟹  \implies y = 208200

    Correct

    0.18(1{,}200 - y) + 0.30y = 252   ⟹  \implies 0.12y = 36   ⟹  \implies y = 300,\ x = 900

    Your substitution and algebraic solving techniques were carried out correctly, but the values were distorted by the unit scaling error in the previous step.

  4. Step 4

    x/y = −207000208200\frac{-207000}{208200} = -345347\frac{345}{347}

    Correct

    xy=900300=3\frac{x}{y} = \frac{900}{300} = 3

    The final ratio was evaluated correctly from your calculated values, but it reflects the propagated error from the nitrogen balance equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and labeled the two unknown masses with variables.

You correctly formulated the total mass equation as x+y=1,200x + y = 1{,}200.

You executed algebraic substitution and linear equation solving accurately throughout your work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inconsistent Percentage Conversion

Writing 21(1200)21(1200) instead of 0.21(1200)0.21(1200) on the right side of the component balance equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to maintain unit consistency across both sides of a mixture equation by mixing decimal rates on the left with integer percentage values on the right.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • When writing mixture equations, either convert all percentages to decimals/fractions (0.18x+0.30y=0.21×1,2000.18x + 0.30y = 0.21 \times 1{,}200) or keep all percentages as whole numbers (18x+30y=21×1,20018x + 30y = 21 \times 1{,}200).

  • Verify that the concentration factor on the right-hand side uses the exact same representation (decimal or integer percentage) as the left-hand side.

Physical Reality Sanity Check
  • Physical quantities like mass and mass ratios cannot be negative.

  • If a calculated mass is negative or larger than the total blend mass (1,200 kg1{,}200\text{ kg}), immediately pause and check the constant terms in your system.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the nitrogen balance using decimal concentrations on both sides: 0.18x+0.30y=0.21(1,200)=2520.18x + 0.30y = 0.21(1{,}200) = 252

  2. Substitute y=1,200−xy = 1{,}200 - x into the nitrogen equation: 0.18x+0.30(1,200−x)=2520.18x + 0.30(1{,}200 - x) = 252

  3. Expand and combine like terms: 0.18x+360−0.30x=252  ⟹  −0.12x=−1080.18x + 360 - 0.30x = 252 \implies -0.12x = -108

  4. Solve for xx: x=−108−0.12=900 kgx = \frac{-108}{-0.12} = 900\text{ kg}

  5. Find yy: y=1,200−900=300 kgy = 1{,}200 - 900 = 300\text{ kg}

  6. Compute the ratio xy\frac{x}{y}: xy=900300=3\frac{x}{y} = \frac{900}{300} = 3

Final answer

xy=3\frac{x}{y} = 3

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check that percentage rates match in format across all terms in a mixture equation.

  • Perform a quick feasibility check: the resulting mixture concentration (21%21\%) lies between 18%18\% and 30%30\%, so both xx and yy must be positive numbers between 00 and 1,2001{,}200.

OverviewACEpath Teacher's Diagnosis

03 The student swaps the nitrogen percentages for Brand X and Brand Y, assigning 30% to Brand X and 18% to Brand Y, yielding x/y = 1/3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Let x=mass of Brand X in kgx = \text{mass of Brand X in kg}, y=mass of Brand Y in kgy = \text{mass of Brand Y in kg}

  2. Step 2

    x + y = 1200

  3. Step 3

    0.30x + 0.18y = 0.21(1200)

    Correct

    0.18x + 0.30y = 0.21(1200)

    You reversed the concentrations: Brand X contains 18%18\% nitrogen (0.18x0.18x) and Brand Y contains 30%30\% nitrogen (0.30y0.30y), but you assigned 0.300.30 to xx and 0.180.18 to yy.

  4. Step 4

    0.30x + 0.18y = 0.21(x + y)   ⟹  \implies 0.09x = 0.03y

    Correct

    0.18x + 0.30y = 0.21(x + y)   ⟹  \implies 0.09y = 0.03x

    Your algebraic method of substituting 1200=x+y1200 = x + y to eliminate the total mass and directly relate xx and yy was mathematically sound, but it inherited the swapped coefficients from the previous step.

  5. Step 5

    xy=0.030.09=13\frac{x}{y} = \frac{0.03}{0.09} = \frac{1}{3}

    Correct

    xy=0.090.03=3\frac{x}{y} = \frac{0.09}{0.03} = 3

    Your division correctly followed from your previous line, but because the coefficients were swapped earlier, your final ratio is the reciprocal of the true ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly stated the variables along with their units.

You modeled the total mass constraint correctly.

You recognized an elegant method to solve directly for the ratio xy\frac{x}{y} by rewriting 1,2001{,}200 as (x+y)(x + y).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed variable coefficients in mixture equation

You matched Brand X (xx) with 30%30\% and Brand Y (yy) with 18%18\%, swapping their given concentrations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of the one-to-one correspondence between variable definitions and their associated rates when translating problem text into algebraic terms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Variable-to-Rate Alignment
  • Every rate or unit value must multiply its designated variable: rateA×x+rateB×y=ratemix×(x+y)\text{rate}_A \times x + \text{rate}_B \times y = \text{rate}_{\text{mix}} \times (x + y).

  • Write the item name, chosen variable, and percentage in a quick two-row table before writing down the equation.

Weighted Average Sanity Check
  • The blend concentration always lies between the two component concentrations and sits closer to whichever component makes up the majority.

  • Notice that 21%21\% is much closer to 18%18\% (Brand X) than to 30%30\% (Brand Y), meaning Brand X must dominate the blend (x>yx > y), so xy\frac{x}{y} must be greater than 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Expand the right side: 0.18x+0.30y=0.21x+0.21y0.18x + 0.30y = 0.21x + 0.21y.

  2. Collect like terms on opposite sides: 0.30y−0.21y=0.21x−0.18x0.30y - 0.21y = 0.21x - 0.18x.

  3. Simplify the coefficients: 0.09y=0.03x0.09y = 0.03x.

  4. Isolate the ratio xy\frac{x}{y}: xy=0.090.03=3\frac{x}{y} = \frac{0.09}{0.03} = 3.

Final answer

xy=3\frac{x}{y} = 3

NEXT STEPS
Final Takeaways from Your Teacher
  • Create a mini-table matching each item, variable, and rate before forming mixture equations.

  • Apply the sanity check: determine which component the target concentration is closer to, and verify that its ratio quantity is larger than 1.

Lock it in

Similar question

01

An alloy contains 10%10\% copper and a second alloy contains 40%40\% copper. They are melted together to produce a mixture containing 20%20\% copper. Define variables and find the mass ratio xy\frac{x}{y} of the first alloy to the second alloy.

Answer

Let xx be the mass of the 10%10\% alloy and yy be the mass of the 40%40\% alloy. Total copper balance: 0.10x+0.40y=0.20(x+y)0.10x + 0.40y = 0.20(x + y) 0.10x+0.40y=0.20x+0.20y  ⟹  0.20y=0.10x0.10x + 0.40y = 0.20x + 0.20y \implies 0.20y = 0.10x xy=0.200.10=2\frac{x}{y} = \frac{0.20}{0.10} = 2 (or 2:12:1).

02

A chemist blends Solution A (15%15\% acid) with Solution B (35%35\% acid) to make a 30%30\% acid solution. If aa liters of Solution A and bb liters of Solution B are used, set up the concentration equation and determine the ratio ab\frac{a}{b}.

Answer

Acid balance: 0.15a+0.35b=0.30(a+b)0.15a + 0.35b = 0.30(a + b) 0.15a+0.35b=0.30a+0.30b  ⟹  0.05b=0.15a0.15a + 0.35b = 0.30a + 0.30b \implies 0.05b = 0.15a ab=0.050.15=13\frac{a}{b} = \frac{0.05}{0.15} = \frac{1}{3}.

03

A tea merchant blends x kgx\text{ kg} of Grade A tea costing $12/kg\text{\char36}12/\text{kg} with y kgy\text{ kg} of Grade B tea costing $20/kg\text{\char36}20/\text{kg} to produce a blend worth $14/kg\text{\char36}14/\text{kg}. Set up the value equation in terms of xx and yy, and find the ratio of Grade A tea to Grade B tea (xy\frac{x}{y}).

Answer

Cost balance: 12x+20y=14(x+y)12x + 20y = 14(x + y) 12x+20y=14x+14y  ⟹  6y=2x12x + 20y = 14x + 14y \implies 6y = 2x xy=62=3\frac{x}{y} = \frac{6}{2} = 3 (or 3:13:1).

Loading workspace…