Resources

A geometric figure in the xyxy-plane is transformed by first rotating it 90∘90^\circ counterclockwise about the origin, and then translating it along the vector w⃗=⟨−4,7⟩\vec{w} = \langle -4, 7 \rangle. After this composite transformation, the final image of a specific point QQ is located at Q′′(−1,3)Q''(-1, 3). Determine the coordinates of the original point Q(x,y)Q(x, y) before any transformations were applied.

Answer and steps

Final answer

Q(−4,−3)Q(-4, -3)

Steps

To find the original coordinates of point Q(x,y)Q(x, y), we can trace the coordinates forward algebraically through each transformation, or reverse the transformations step-by-step from Q′′Q''.

Method 1: Setting Up Coordinate Equations

  1. Apply the 90∘90^\circ counterclockwise rotation: Rotating a point (x,y)(x, y) counterclockwise by 90∘90^\circ about the origin maps it according to the standard coordinate rule: (x,y)→(−y,x)(x, y) \to (-y, x) Therefore, the intermediate image is Q′(−y,x)Q'(-y, x).
  2. Apply the translation: Translating along the vector w⃗=⟨−4,7⟩\vec{w} = \langle -4, 7 \rangle adds −4-4 to the xx-coordinate and 77 to the yy-coordinate: Q′(−y,x)→Q′′(−y−4,x+7)Q'(-y, x) \to Q''(-y - 4, x + 7)
  3. Solve for xx and yy: We are given that the final coordinates are Q′′(−1,3)Q''(-1, 3). Equating the coordinates: −y−4=−1  ⟹  −y=3  ⟹  y=−3-y - 4 = -1 \implies -y = 3 \implies y = -3 x+7=3  ⟹  x=−4x + 7 = 3 \implies x = -4

Thus, the original point is Q(−4,−3)Q(-4, -3).


Method 2: Working Backward (Inverse Transformations)

  1. Undo the translation: The inverse of translating by ⟨−4,7⟩\langle -4, 7 \rangle is translating by ⟨4,−7⟩\langle 4, -7 \rangle: Q′=(−1+4,3−7)=(3,−4)Q' = (-1 + 4, 3 - 7) = (3, -4)
  2. Undo the 90∘90^\circ counterclockwise rotation: The inverse of a 90∘90^\circ counterclockwise rotation is a 90∘90^\circ clockwise rotation (or 270∘270^\circ counterclockwise), which follows the rule (x′,y′)→(y′,−x′)(x', y') \to (y', -x'): Q=(−4,−(3))=(−4,−3)Q = (-4, -(3)) = (-4, -3)

Common Pitfall: When reversing transformations, remember to invert both the operations and their order: first undo the translation, then undo the rotation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the translation correctly to obtain Q'(3, -4) but mistakenly rotates counterclockwise by 90° instead of inverting the rotation, using the rule (-y', x') instead of (y', -x') to get (4, 3).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q′′=(−1,3)  ⟹  Q′=(−1−(−4),3−7)=(3,−4)Q'' = (-1, 3) \implies Q' = (-1 - (-4), 3 - 7) = (3, -4)

  2. Step 2

    Rotate \text{Rotate } 90^∘\circ  counterclockwise: \text{ counterclockwise: } (x, y) = (-y', x')   ⟹  \implies Q = (4, 3)

    Correct

    Rotate \text{Rotate } 90^∘\circ  clockwise (inverse rotation): \text{ clockwise (inverse rotation): } (x, y) = (y', -x')   ⟹  \implies Q = (-4, -3)

    To reverse a 90∘90^\circ counterclockwise rotation, you must rotate 90∘90^\circ clockwise (or solve x′=−yx' = -y and y′=xy' = x). Applying the forward rule (x,y)=(−y′,x′)(x, y) = (-y', x') rotated the point further counterclockwise instead of undoing the rotation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly reversed the order of composite transformations by addressing the translation first.

You correctly inverted the translation vector by subtracting ⟨−4,7⟩\langle -4, 7 \rangle to find the intermediate coordinates Q′(3,−4)Q'(3, -4).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Applying forward transformation instead of inverse

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When working backward through a sequence of transformations, each individual operation must also be inverted. The inverse of a 90∘90^\circ counterclockwise rotation is a 90∘90^\circ clockwise rotation, which maps (x′,y′)→(y′,−x′)(x', y') \to (y', -x'), rather than applying the original rule (−y′,x′)(-y', x').

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse of a Rotation
  • Rotating by θ\theta counterclockwise is inverted by rotating by θ\theta clockwise (or −θ-\theta). Specifically, the inverse of (x,y)→(−y,x)(x, y) \to (-y, x) is (x′,y′)→(y′,−x′)(x', y') \to (y', -x').

  • Always verify whether you are moving forward from pre-image to image or backward from image to pre-image before choosing coordinate mapping rules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the inverse of a 90∘90^\circ counterclockwise rotation, which is a 90∘90^\circ clockwise rotation: (x,y)=(y′,−x′)(x, y) = (y', -x').

  2. Substitute x′=3x' = 3 and y′=−4y' = -4 into the inverse formula: x=−4x = -4 and y=−3y = -3.

Final answer

Q(−4,−3)Q(-4, -3)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing out the forward equations (x′=−yx' = -y, y′=xy' = x) and solving directly for xx and yy as an alternative way to avoid inverse rotation sign errors.

  • Work through composite transformation problems where you check your result by applying the transformations forward to the answer.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the operations in the wrong order by first undoing the 90° rotation and then undoing the translation, leading to the incorrect coordinates (7, 4).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Rotate 90∘90^\circ clockwise: (y,−x)=(3,1)(y, -x) = (3, 1)

    Correct

    Translate by −w⃗=⟨4,−7⟩-\vec{w} = \langle 4, -7 \rangle: Q′=(−1−(−4),3−7)=(3,−4)Q' = (-1 - (-4), 3 - 7) = (3, -4)

    To undo a sequence of transformations, you must undo the last transformation first (the "shoes and socks" principle). Because the figure was translated last, you must undo the translation before undoing the rotation.

  2. Step 2

    Subtract translation ⟨−4,7⟩\langle -4, 7 \rangle: Q=(3−(−4),1−7)  ⟹  Q=(7,−6)Q = (3 - (-4), 1 - 7) \implies Q = (7, -6)

    Correct

    Rotate 90∘90^\circ clockwise about the origin: Q=(y′,−x′)=(−4,−(3))=(−4,−3)Q = (y', -x') = (-4, -(3)) = (-4, -3)

    Because the operations were carried out in the wrong sequence, your final subtraction used the wrong intermediate point.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the inverse of a 90∘90^\circ counterclockwise rotation is a 90∘90^\circ clockwise rotation with coordinate rule (x,y)→(y,−x)(x, y) \to (y, -x).

You correctly recognized that undoing a translation vector involves subtracting the components of that vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversing composite transformations in forward order

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the individual transformation rules correctly, but forgot that the inverse of a composite transformation (B∘A)−1(B \circ A)^{-1} requires reversing the order of operations to A−1∘B−1A^{-1} \circ B^{-1}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Shoes and Socks Principle
  • To reverse a composite function or transformation (T2∘T1)(T_2 \circ T_1), apply the inverse operations in reverse order: (T2∘T1)−1=T1−1∘T2−1(T_2 \circ T_1)^{-1} = T_1^{-1} \circ T_2^{-1}.

  • Identify the very last transformation applied forward, and undo that one first.

Verification via Forward Check
  • Substituting your candidate original point into the forward rules must reproduce the given final point: Q(x,y)→Q′(−y,x)→Q′′(−y−4,x+7)Q(x, y) \to Q'(-y, x) \to Q''(-y - 4, x + 7).

  • Always plug your final answer back into the forward steps to verify that it matches Q′′(−1,3)Q''(-1, 3).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Undo the translation first by subtracting w⃗=⟨−4,7⟩\vec{w} = \langle -4, 7 \rangle from Q′′(−1,3)Q''(-1, 3): Q′=(−1−(−4),3−7)=(3,−4)Q' = (-1 - (-4), 3 - 7) = (3, -4).

  2. Undo the 90∘90^\circ counterclockwise rotation by rotating Q′(3,−4)Q'(3, -4) clockwise by 90∘90^\circ using (x′,y′)→(y′,−x′)(x', y') \to (y', -x'): Q=(−4,−3)Q = (-4, -3).

Final answer

Q(−4,−3)Q(-4, -3)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the composite inverse rule (g∘f)−1=f−1∘g−1(g \circ f)^{-1} = f^{-1} \circ g^{-1} using everyday analogies like putting on socks and shoes.

  • Practice setting up coordinate equations in the forward direction as an alternative method to avoid sequencing mistakes.

OverviewACEpath Teacher's Diagnosis

03 The student applies the forward transformations directly to Q'' instead of inverting them, translating by adding ⟨-4, 7⟩ and then rotating 90° counterclockwise to reach (-10, -5).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q′=(−1+(−4),3+7)=(−5,10)Q' = (-1 + (-4), 3 + 7) = (-5, 10)

    Correct

    Q′=(−1−(−4),3−7)=(3,−4)Q' = (-1 - (-4), 3 - 7) = (3, -4)

    To undo a translation by vector w⃗=⟨−4,7⟩\vec{w} = \langle -4, 7 \rangle, you need to apply the inverse translation by subtracting the vector, which means adding ⟨4,−7⟩\langle 4, -7 \rangle to Q′′(−1,3)Q''(-1, 3).

  2. Step 2

    Rotate \text{Rotate } 90^∘\circ  counterclockwise: \text{ counterclockwise: } (-y, x)   ⟹  \implies Q = (-10, -5)

    Correct

    Rotate \text{Rotate } 90^∘\circ  clockwise: \text{ clockwise: } (x', y') →\to (y', -x')   ⟹  \implies Q = (-4, -3)

    To reverse a 90∘90^\circ counterclockwise rotation, you must rotate 90∘90^\circ clockwise (or 270∘270^\circ counterclockwise) using the rule (x′,y′)→(y′,−x′)(x', y') \to (y', -x'), rather than applying the forward rotation again.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the standard coordinate rule (x,y)→(−y,x)(x, y) \to (-y, x) for a 90∘90^\circ counterclockwise rotation.

You reversed the order of the composite steps by handling the translation before the rotation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Forward Transformation Applied to Image Point

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the forward operations directly to the final image Q′′Q'' instead of inverting each operation (subtracting the translation vector and rotating clockwise).

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverting a Translation
  • The inverse of translating by ⟨a,b⟩\langle a, b \rangle is translating by ⟨−a,−b⟩\langle -a, -b \rangle.

  • Subtract the translation components from the coordinates of the final point: (x′′−a,y′′−b)(x'' - a, y'' - b).

Inverting a Rotation
  • The inverse of a 90∘90^\circ counterclockwise rotation about the origin is a 90∘90^\circ clockwise rotation.

  • Apply the clockwise rotation rule (x′,y′)→(y′,−x′)(x', y') \to (y', -x') to find the pre-image.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Undo the translation by subtracting w⃗=⟨−4,7⟩\vec{w} = \langle -4, 7 \rangle from Q′′(−1,3)Q''(-1, 3): Q′=(−1−(−4),3−7)=(3,−4)Q' = (-1 - (-4), 3 - 7) = (3, -4).

  2. Undo the 90∘90^\circ counterclockwise rotation by rotating Q′(3,−4)Q'(3, -4) by 90∘90^\circ clockwise using the rule (x′,y′)→(y′,−x′)(x', y') \to (y', -x'): Q=(−4,−(3))=(−4,−3)Q = (-4, -(3)) = (-4, -3).

Final answer

Q(−4,−3)Q(-4, -3)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit inverse rules before substituting coordinates when working backward from an image.

  • Verify your final coordinates by running them forward through the original transformations to check if they produce Q′′(−1,3)Q''(-1, 3).

Lock it in

Similar question

01

A point A(x,y)A(x, y) is rotated 180∘180^\circ about the origin and then translated by vector v⃗=⟨5,−2⟩\vec{v} = \langle 5, -2 \rangle, ending at A′′(1,4)A''(1, 4). What were the coordinates of AA?

Answer

A(4,−6)A(4, -6). Reverse translation: A′=(1−5,4−(−2))=(−4,6)A' = (1 - 5, 4 - (-2)) = (-4, 6). Reverse 180∘180^\circ rotation (which is its own inverse): A=(−(−4),−(6))=(4,−6)A = (-(-4), -(6)) = (4, -6).

02

Point B(x,y)B(x, y) is reflected over the xx-axis and then rotated 90∘90^\circ counterclockwise about the origin. The final image is B′′(6,−2)B''(6, -2). Find the original coordinates of BB.

Answer

B(−2,−6)B(-2, -6). Step 1 (undo rotation): Rotate B′′(6,−2)B''(6, -2) by 90∘90^\circ clockwise using (y′′,−x′′)(y'', -x'') to get B′(−2,−6)B'(-2, -6). Step 2 (undo reflection over the xx-axis): Reflecting over the xx-axis is self-inverse, mapping (x,y)→(x,−y)(x, y) \to (x, -y), so B=(−2,−(−6))B = (-2, -(-6)) is incorrect if we don't track carefully: (x,−y)=(−2,−6)  ⟹  x=−2,y=6(x, -y) = (-2, -6) \implies x = -2, y = 6, giving B(−2,6)B(-2, 6).

03

A triangle vertex C(x,y)C(x, y) undergoes three transformations in order: a translation by u⃗=⟨2,−1⟩\vec{u} = \langle 2, -1 \rangle, a reflection across the line y=xy = x, and finally a 90∘90^\circ counterclockwise rotation about the origin. If the final position is C′′′(−5,1)C'''(-5, 1), determine the coordinates of C(x,y)C(x, y).

Answer

C(−3,7)C(-3, 7). Step 1: Undo 90∘90^\circ CCW rotation by rotating 90∘90^\circ CW: C′′=(y′′′,−x′′′)=(1,5)C'' = (y''', -x''') = (1, 5). Step 2: Undo reflection across y=xy = x (swap back): C′=(5,1)C' = (5, 1). Step 3: Undo translation ⟨2,−1⟩\langle 2, -1 \rangle: C=(5−2,1−(−1))=(3,2)C = (5 - 2, 1 - (-1)) = (3, 2).

Loading workspace…