Resources
A chemistry student prepares of a hydrochloric acid () solution by mixing two stock solutions: Stock Solution A () and Stock Solution B (). Setting and as the volumes (in milliliters) of Stock Solutions A and B respectively, the mixture satisfies the total volume equation and the molar conservation equation . Use substitution to find the exact volume of each stock solution required.
Answer and steps
Final answer
,
Steps
Write down the system of equations
To find the required volume of each stock solution using the substitution method, follow these steps:
From the problem, we have two equations relating the volumes and :
- Total volume:
- Total amount of solute ():
Express one variable in terms of the other
Isolate in the total volume equation:
Substitute the expression into the second equation
Replace with in the molar conservation equation:
Pitfall to avoid: Remember to distribute to both terms inside the parentheses ( and ).
Solve for
Expand and combine like terms:
Subtract from both sides:
Divide by :
Substitute back to find
Use the equation isolated in Step 2:
Verify the solution
Check the values in the molar conservation equation: Both equations are satisfied.
Thus, the required volumes are and .
Typical errors
01 The student forgets to distribute the coefficient 0.100 to both terms inside the parentheses during substitution, leading to incorrect volumes.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You multiplied by but forgot to multiply by . The product equals , not .
- Step 3Correct
Your subsequent algebraic isolation was executed correctly, but it inherited the distribution error and produced an extraneous negative value.
- Step 4Correct
Substituting the erroneous back into the volume relation yielded an incorrect value for .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly isolated the variable in terms of from the total volume equation.
You correctly substituted into the molar conservation equation.
You combined like terms and solved the linear equation algebraically using consistent inverse operations.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou copied directly into the next line instead of computing .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to apply the distributive property to every term inside the parentheses, specifically leaving the constant term unmultiplied by the outer decimal factor.
REASONING PATH
Your ACEpath teacher’s suggested approach- Complete Distribution Rule
For any expression , multiply by both terms: .
Draw distribution arcs from the outer multiplier to each term inside the parentheses before writing the expanded line.
- Physical Reality Check
Component volumes in a physical mixture must satisfy .
If you obtain a negative volume or a volume exceeding , stop and re-check your algebraic expansion.
CORRECTED PATH
ACEpath Teacher's DemonstrationDistribute completely: .
Subtract from both sides: .
Divide by : .
Substitute back into : .
,
02 The student swaps the concentration coefficients associated with Stock Solutions A and B when setting up the substitution, misattributing the volumes.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
V_A = 500 - V_B
- Step 2
0.400 V_A + 0.100 V_B = 140 0.400(500 - V_B) + 0.100 V_B = 140
Correct0.100 V_A + 0.400 V_B = 140 0.100(500 - V_B) + 0.400 V_B = 140
You swapped the concentration coefficients. Stock Solution A has a concentration of and Stock Solution B has a concentration of , so the equation must be .
- Step 3
200 - 0.400 V_B + 0.100 V_B = 140 200 - 0.300 V_B = 140 -0.300 V_B = -60 V_B = 200
Correct50 - 0.100 V_B + 0.400 V_B = 140 50 + 0.300 V_B = 140 0.300 V_B = 90 V_B = 300
Your algebraic solving steps were executed correctly, but the result was affected by the swapped coefficients from Step 2.
- Step 4
V_A = 500 - 200 = 300
CorrectV_A = 500 - 300 = 200
You correctly subtracted from , but this value is inverted due to the earlier coefficient swap.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly expressed in terms of using the total volume equation.
You expanded parentheses and combined like terms with accurate arithmetic.
You correctly substituted your solved volume back into the linear relation to find the second volume.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned the concentration to and the concentration to instead of matching Solution A with and Solution B with .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to verify variable-to-parameter alignment when transcribing the system of equations from the word problem, likely caused by writing the second equation from memory rather than checking each labeled quantity.
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Variable Labels to Data
Every coefficient must correspond directly to the specific solution represented by its subscript variable.
Before substituting, write the named pairs explicitly: and .
- Weighted Average Sanity Check
The final concentration () is closer to Stock B () than Stock A (), so must be larger than .
Compare and . Since the mixture is closer to B, must hold.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute :
Expand and simplify:
Subtract : , so
Back-substitute to find :
V_A = 200, V_B = 300
03 The student subtracts terms incorrectly across the equals sign by adding 50 to 140 instead of subtracting it, arriving at incorrect solution volumes.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
V_A = 500 - V_B
- Step 2
0.100(500 - V_B) + 0.400 V_B = 140 50 - 0.100 V_B + 0.400 V_B = 140 50 + 0.300 V_B = 140
- Step 3
0.300 V_B = 190 V_B = 633.33
Correct0.300 V_B = 140 - 50 = 90 V_B = = 300
To move across the equals sign, you must subtract from both sides (), not add it ().
- Step 4
V_A = 500 - 633.33 = -133.33
CorrectV_A = 500 - 300 = 200
This step carried over the incorrect value of . Notice also that a negative volume () is physically impossible in a mixture problem, which is a helpful signal to check your algebra.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly isolated from the total volume equation.
You substituted the expression into the conservation equation accurately.
You correctly distributed and combined the variable terms.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added to to get instead of subtracting to get .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisApplying the same sign when transposing a constant term to the other side of an equation rather than applying the inverse operation (subtracting from both sides).
REASONING PATH
Your ACEpath teacher’s suggested approach- Balance with Inverse Operations
Adding a positive constant to one side means you must subtract from both sides to isolate the variable term: .
Always explicitly write on both sides of before calculating.
- Physical Reality Check
Volumes and concentrations in mixture problems must be positive and cannot exceed the total mixture volume.
If your answer yields a volume greater than the total () or a negative volume (), pause immediately to inspect your inverse operations.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubtract from both sides of :
Divide both sides by :
Substitute into :
,
Lock it in
How do you correctly expand when is a decimal coefficient?
Multiply by each term individually: . Never leave the first term unmultiplied.
Similar question
Solve for by substitution: .
Answer
, . Substitute : , then .
A chemist needs of a acid solution by mixing an solution () and a solution (). Solve for and using substitution.
Answer
, . From , substitute into : , then .
Solve the system using substitution: .
Answer
, . Isolate and substitute into the second equation: . Then .