Resources

Use Cramer's Rule to solve the system of linear equations for xx and yy: {3x−4y=102x+5y=−1\begin{cases} 3x - 4y = 10 \\ 2x + 5y = -1 \end{cases} Compute the coefficient determinant DD, the numerator determinants DxD_x and DyD_y, and state the unique solution (x,y)(x, y).

Answer and steps

Final answer

D=23D = 23, Dx=46D_x = 46, Dy=−23D_y = -23; (x,y)=(2,−1)(x, y) = (2, -1)

Steps

01

Calculate the coefficient determinant, DD

To solve a system of two linear equations in two variables using Cramer's Rule, represent the system in terms of determinants.

Write the determinant formed by the coefficients of xx and yy: D=∣3−425∣D = \begin{vmatrix} 3 & -4 \\ 2 & 5 \end{vmatrix}

Evaluate the 2×22 \times 2 determinant using the formula ∣abcd∣=ad−bc\begin{vmatrix} a & b \\ c & d \end{vmatrix} = ad - bc: D=(3)(5)−(−4)(2)=15−(−8)=15+8=23D = (3)(5) - (-4)(2) = 15 - (-8) = 15 + 8 = 23

Since D≠0D \neq 0, the system has a unique solution.

02

Calculate the determinant for xx, DxD_x

Form DxD_x by replacing the first column (the coefficients of xx) with the constant terms from the right-hand side, 1010 and −1-1: Dx=∣10−4−15∣D_x = \begin{vmatrix} 10 & -4 \\ -1 & 5 \end{vmatrix}

Evaluate the determinant: Dx=(10)(5)−(−4)(−1)=50−4=46D_x = (10)(5) - (-4)(-1) = 50 - 4 = 46

03

Calculate the determinant for yy, DyD_y

Form DyD_y by replacing the second column (the coefficients of yy) with the constant terms from the right-hand side, 1010 and −1-1: Dy=∣3102−1∣D_y = \begin{vmatrix} 3 & 10 \\ 2 & -1 \end{vmatrix}

Evaluate the determinant: Dy=(3)(−1)−(10)(2)=−3−20=−23D_y = (3)(-1) - (10)(2) = -3 - 20 = -23

04

Solve for xx and yy

Apply Cramer's Rule, which states x=DxDx = \frac{D_x}{D} and y=DyDy = \frac{D_y}{D}: x=4623=2x = \frac{46}{23} = 2 y=−2323=−1y = \frac{-23}{23} = -1

A common pitfall is mishandling the negative signs in the determinant subtraction ad−bcad - bc, especially when one or both of the cross-terms are negative. Always retain parentheses around negative factors to avoid sign errors.

Thus, the determinants are D=23D = 23, Dx=46D_x = 46, Dy=−23D_y = -23, and the solution is (x,y)=(2,−1)(x, y) = (2, -1).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the product of the main diagonal from the anti-diagonal when evaluating 2x2 determinants, reversing the sign of each determinant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    D=(−4)(2)−(3)(5)=−8−15=−23D = (-4)(2) - (3)(5) = -8 - 15 = -23

    Correct

    D=∣3−425∣=(3)(5)−(−4)(2)=15−(−8)=23D = \begin{vmatrix} 3 & -4 \\ 2 & 5 \end{vmatrix} = (3)(5) - (-4)(2) = 15 - (-8) = 23

    You subtracted the main diagonal product from the anti-diagonal product (bc−adbc - ad). The determinant of ∣abcd∣\begin{vmatrix} a & b \\ c & d \end{vmatrix} is defined as ad−bcad - bc.

  2. Step 2

    Dx=(−4)(−1)−(10)(5)=4−50=−46D_x = (-4)(-1) - (10)(5) = 4 - 50 = -46

    Correct

    Dx=∣10−4−15∣=(10)(5)−(−4)(−1)=50−4=46D_x = \begin{vmatrix} 10 & -4 \\ -1 & 5 \end{vmatrix} = (10)(5) - (-4)(-1) = 50 - 4 = 46

    You placed the correct column values into DxD_x, but evaluated it in reverse order as (−4)(−1)−(10)(5)(-4)(-1) - (10)(5) instead of (10)(5)−(−4)(−1)(10)(5) - (-4)(-1).

  3. Step 3

    Dy=(10)(2)−(3)(−1)=20−(−3)=23D_y = (10)(2) - (3)(-1) = 20 - (-3) = 23

    Correct

    Dy=∣3102−1∣=(3)(−1)−(10)(2)=−3−20=−23D_y = \begin{vmatrix} 3 & 10 \\ 2 & -1 \end{vmatrix} = (3)(-1) - (10)(2) = -3 - 20 = -23

    You placed the correct column values into DyD_y, but again reversed the diagonal subtraction order, leading to 2323 instead of −23-23.

  4. Step 4

    x=DxD=−46−23=2  ⟹  y=DyD=23−23=−1  ⟹  (x,y)=(2,−1)x = \frac{D_x}{D} = \frac{-46}{-23} = 2 \implies y = \frac{D_y}{D} = \frac{23}{-23} = -1 \implies (x, y) = (2, -1)

    Correct

    x=DxD=4623=2  ⟹  y=DyD=−2323=−1  ⟹  (x,y)=(2,−1)x = \frac{D_x}{D} = \frac{46}{23} = 2 \implies y = \frac{D_y}{D} = \frac{-23}{23} = -1 \implies (x, y) = (2, -1)

    You applied Cramer's Rule ratios accurately. Because both the numerator and denominator signs were flipped, the final coordinates (2,−1)(2, -1) matched the correct solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the correct matrix entries for DD, DxD_x, and DyD_y.

You correctly used Cramer's Rule ratios x=DxDx = \frac{D_x}{D} and y=DyDy = \frac{D_y}{D}.

You handled double negatives and integer arithmetic reliably within your chosen expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed 2x2 Determinant Diagonal Order

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You systematically evaluated the 2×22 \times 2 determinants using the anti-diagonal minus the main diagonal (bc−adbc - ad) instead of the main diagonal minus the anti-diagonal (ad−bcad - bc).

REASONING PATH
Your ACEpath teacher’s suggested approach
Main Diagonal Order
  • For any 2×22 \times 2 determinant ∣abcd∣\begin{vmatrix} a & b \\ c & d \end{vmatrix}, calculate top-left×bottom-right−top-right×bottom-left\text{top-left} \times \text{bottom-right} - \text{top-right} \times \text{bottom-left}, or ad−bcad - bc.

  • Always draw a downward diagonal from top-left to bottom-right first to anchor the positive term.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate D=(3)(5)−(−4)(2)=15−(−8)=23D = (3)(5) - (-4)(2) = 15 - (-8) = 23.

  2. Calculate Dx=(10)(5)−(−4)(−1)=50−4=46D_x = (10)(5) - (-4)(-1) = 50 - 4 = 46.

  3. Calculate Dy=(3)(−1)−(10)(2)=−3−20=−23D_y = (3)(-1) - (10)(2) = -3 - 20 = -23.

  4. Evaluate x=4623=2x = \frac{46}{23} = 2 and y=−2323=−1y = \frac{-23}{23} = -1.

Final answer

D=23D = 23, Dx=46D_x = 46, Dy=−23D_y = -23; (x,y)=(2,−1)(x, y) = (2, -1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the visual mnemonic 'downward product minus upward product' for 2×22 \times 2 determinants.

  • Practice computing three single 2×22 \times 2 determinants to reinforce calculating ad−bcad - bc every time.

OverviewACEpath Teacher's Diagnosis

02 The student adds the diagonal products instead of subtracting them when computing 2x2 determinants.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D=(3)(5)+(−4)(2)=15−8=7D = (3)(5) + (-4)(2) = 15 - 8 = 7

    Correct

    D=(3)(5)−(−4)(2)=15−(−8)=23D = (3)(5) - (-4)(2) = 15 - (-8) = 23

    To evaluate the determinant ∣3−425∣\begin{vmatrix} 3 & -4 \\ 2 & 5 \end{vmatrix}, subtract the anti-diagonal product from the main diagonal product: ad−bcad - bc. You added them instead of subtracting.

  2. Step 2

    Dx=(10)(5)+(−4)(−1)=50+4=54D_x = (10)(5) + (-4)(-1) = 50 + 4 = 54

    Correct

    Dx=(10)(5)−(−4)(−1)=50−4=46D_x = (10)(5) - (-4)(-1) = 50 - 4 = 46

    You substituted the constant column correctly into the first column, but you added the diagonal products instead of subtracting them: ad−bc=(10)(5)−(−4)(−1)ad - bc = (10)(5) - (-4)(-1).

  3. Step 3

    Dy=(3)(−1)+(10)(2)=−3+20=17D_y = (3)(-1) + (10)(2) = -3 + 20 = 17

    Correct

    Dy=(3)(−1)−(10)(2)=−3−20=−23D_y = (3)(-1) - (10)(2) = -3 - 20 = -23

    You set up the second column with the constants correctly, but again added rather than subtracted the second diagonal product: (3)(−1)−(10)(2)=−23(3)(-1) - (10)(2) = -23.

  4. Step 4

    x=DxD=547  ⟹  y=DyD=177x = \frac{D_x}{D} = \frac{54}{7} \implies y = \frac{D_y}{D} = \frac{17}{7}

    Correct

    x=DxD=4623=2  ⟹  y=DyD=−2323=−1x = \frac{D_x}{D} = \frac{46}{23} = 2 \implies y = \frac{D_y}{D} = \frac{-23}{23} = -1

    You applied Cramer's Rule formula correctly, but the values for xx and yy were affected by the previous determinant errors.

  5. Step 5

    (x,y)=(547,177)(x, y) = \left(\frac{54}{7}, \frac{17}{7}\right)

    Correct

    (x,y)=(2,−1)(x, y) = (2, -1)

    The final coordinate pair follows your calculated values, but it is incorrect due to the determinant calculation errors.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the correct matrix entries from the system of equations.

You placed the constant terms into the appropriate columns to form DxD_x and DyD_y.

You applied Cramer's Rule formulas x=DxDx = \frac{D_x}{D} and y=DyDy = \frac{D_y}{D} correctly to your calculated values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Error: Added Diagonal Products in Determinant

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You systematically used addition instead of subtraction between the diagonal products, evaluating ∣abcd∣\begin{vmatrix} a & b \\ c & d \end{vmatrix} as ad+bcad + bc rather than the correct definition ad−bcad - bc.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate $2 \times 2$ Determinant
  • For any 2×22 \times 2 matrix, ∣abcd∣=ad−bc\begin{vmatrix} a & b \\ c & d \end{vmatrix} = ad - bc.

  • Always write an explicit minus sign between the main diagonal product and the off-diagonal product before simplifying signs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. D=(3)(5)−(−4)(2)=15−(−8)=15+8=23D = (3)(5) - (-4)(2) = 15 - (-8) = 15 + 8 = 23

  2. Dx=(10)(5)−(−4)(−1)=50−4=46D_x = (10)(5) - (-4)(-1) = 50 - 4 = 46

  3. Dy=(3)(−1)−(10)(2)=−3−20=−23D_y = (3)(-1) - (10)(2) = -3 - 20 = -23

  4. x=DxD=4623=2x = \frac{D_x}{D} = \frac{46}{23} = 2

  5. y=DyD=−2323=−1y = \frac{D_y}{D} = \frac{-23}{23} = -1

Final answer

D=23D = 23, Dx=46D_x = 46, Dy=−23D_y = -23; (x,y)=(2,−1)(x, y) = (2, -1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the fundamental 2×22 \times 2 determinant definition as 'down-diagonal minus up-diagonal' (ad−bcad - bc).

  • Keep parentheses around each product, writing (ad)−(bc)(ad) - (bc) explicitly to prevent sign confusion.

OverviewACEpath Teacher's Diagnosis

03 The student swaps the formulas for x and y by dividing the coefficient determinant D by the numerator determinants instead of dividing each numerator determinant by D.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D=(3)(5)−(−4)(2)=15+8=23D = (3)(5) - (-4)(2) = 15 + 8 = 23

  2. Step 2

    Dx=(10)(5)−(−4)(−1)=50−4=46D_x = (10)(5) - (-4)(-1) = 50 - 4 = 46

  3. Step 3

    Dy=(3)(−1)−(10)(2)=−3−20=−23D_y = (3)(-1) - (10)(2) = -3 - 20 = -23

  4. Step 4

    x=DDx=2346=12x = \frac{D}{D_x} = \frac{23}{46} = \frac{1}{2}

    Correct

    x=DxD=4623=2x = \frac{D_x}{D} = \frac{46}{23} = 2

    You inverted the quotient for xx. According to Cramer's Rule, the variable's determinant goes in the numerator and the main determinant goes in the denominator: x=DxDx = \frac{D_x}{D}.

  5. Step 5

    y=DDy=23(−23)=−1y = \frac{D}{D_y} = \frac{23}{(-23)} = -1

    Correct

    y=DyD=−2323=−1y = \frac{D_y}{D} = \frac{-23}{23} = -1

    You inverted the quotient for yy as well. Although 23−23\frac{23}{-23} happens to equal −1-1, the correct formula is y=DyD=−2323y = \frac{D_y}{D} = \frac{-23}{23}.

  6. Step 6

    (x,y)=(12,−1)(x, y) = \left(\frac{1}{2}, -1\right)

    Correct

    (x,y)=(2,−1)(x, y) = (2, -1)

    Because of the inverted fraction in the calculation of xx, your ordered pair contains an incorrect value for xx.

WHAT YOU DID WELL
Compliments from Your Teacher

You formed each 2×22 \times 2 determinant matrix correctly from the system.

You accurately computed the cross-multiplications and handled the negative signs without arithmetic errors.

You correctly found D=23D = 23, Dx=46D_x = 46, and Dy=−23D_y = -23.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Cramer's Rule ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the numerator and denominator in Cramer's Rule, computing DDvariable\frac{D}{D_{\text{variable}}} instead of DvariableD\frac{D_{\text{variable}}}{D}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cramer's Rule Formula Structure
  • For any variable xix_i, the solution is xi=DxiDx_i = \frac{D_{x_i}}{D}, with the base coefficient determinant always in the denominator.

  • Always place the system's baseline determinant DD on the bottom, just like standard division by the coefficient matrix.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct ratio for xx: x=DxD=4623=2x = \frac{D_x}{D} = \frac{46}{23} = 2.

  2. Apply the correct ratio for yy: y=DyD=−2323=−1y = \frac{D_y}{D} = \frac{-23}{23} = -1.

Final answer

D=23D = 23, Dx=46D_x = 46, Dy=−23D_y = -23; (x,y)=(2,−1)(x, y) = (2, -1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the overall system determinant DD is placed in the denominator of every variable's ratio.

  • Substitute your final values (x,y)(x, y) back into the original equations to verify that they satisfy both equations.

Lock it in

Similar question

01

Evaluate the determinant ∣5−234∣\begin{vmatrix} 5 & -2 \\ 3 & 4 \end{vmatrix}.

Answer

2626. Key step: (5)(4)−(−2)(3)=20−(−6)=26(5)(4) - (-2)(3) = 20 - (-6) = 26.

02

Use Cramer's Rule to find DD, DxD_x, and xx for the system: 2x+y=72x + y = 7 and 3x−4y=53x - 4y = 5.

Answer

D=−11D = -11, Dx=−33D_x = -33, x=3x = 3. Key steps: D=(2)(−4)−(1)(3)=−8−3=−11D = (2)(-4) - (1)(3) = -8 - 3 = -11; Dx=(7)(−4)−(1)(5)=−28−5=−33D_x = (7)(-4) - (1)(5) = -28 - 5 = -33; x=−33−11=3x = \frac{-33}{-11} = 3.

03

Solve the system using Cramer's Rule by computing DD, DxD_x, DyD_y, and (x,y)(x, y): 4x−3y=114x - 3y = 11 and 2x+5y=−12x + 5y = -1.

Answer

D=26D = 26, Dx=52D_x = 52, Dy=−26D_y = -26; (x,y)=(2,−1)(x, y) = (2, -1). Key steps: D=4(5)−(−3)(2)=26D = 4(5) - (-3)(2) = 26; Dx=11(5)−(−3)(−1)=55−3=52D_x = 11(5) - (-3)(-1) = 55 - 3 = 52; Dy=4(−1)−11(2)=−4−22=−26D_y = 4(-1) - 11(2) = -4 - 22 = -26; x=5226=2x = \frac{52}{26} = 2, y=−2626=−1y = \frac{-26}{26} = -1.

Loading workspace…