Resources

In a spectrophotometric assay, two absorbing species XX and YY in a mixture obey Beer's Law. At two wavelengths λ1=450 nm\lambda_1 = 450\text{ nm} and λ2=600 nm\lambda_2 = 600\text{ nm}, the molar absorptivity matrix in L⋅mol−1⋅cm−1\text{L}\cdot\text{mol}^{-1}\cdot\text{cm}^{-1} is ε=[800200100500]\varepsilon = \begin{bmatrix} 800 & 200 \\ 100 & 500 \end{bmatrix}. For a path length of 1.00 cm1.00\text{ cm}, the measured total absorbances are A450=0.500A_{450} = 0.500 and A600=0.430A_{600} = 0.430. Set up the matrix equation εC=Aobs\varepsilon C = A_{\text{obs}}, compute ε−1\varepsilon^{-1}, and find the molar concentrations cXc_X and cYc_Y in mol/L\text{mol}/\text{L}.

Answer and steps

Final answer

ε−1=[53800−23800−1380083800]=[1.316×10−3−5.263×10−4−2.632×10−42.105×10−3]\varepsilon^{-1} = \begin{bmatrix} \frac{5}{3800} & -\frac{2}{3800} \\ -\frac{1}{3800} & \frac{8}{3800} \end{bmatrix} = \begin{bmatrix} 1.316 \times 10^{-3} & -5.263 \times 10^{-4} \\ -2.632 \times 10^{-4} & 2.105 \times 10^{-3} \end{bmatrix}, cX=4.32×10−4 Mc_X = 4.32 \times 10^{-4}\text{ M}, cY=7.74×10−4 Mc_Y = 7.74 \times 10^{-4}\text{ M}

Steps

01

Set up the matrix equation

According to Beer's Law for a multi-component mixture with a path length of b=1.00 cmb = 1.00\text{ cm}, the total absorbance at each wavelength is the sum of the absorbances of species XX and YY:

Aλ=εX,λ⋅b⋅cX+εY,λ⋅b⋅cYA_{\lambda} = \varepsilon_{X, \lambda} \cdot b \cdot c_X + \varepsilon_{Y, \lambda} \cdot b \cdot c_Y

Writing this system for the two wavelengths λ1=450 nm\lambda_1 = 450\text{ nm} and λ2=600 nm\lambda_2 = 600\text{ nm} in matrix form εC=Aobs\varepsilon C = A_{\text{obs}} gives:

[800200100500][cXcY]=[0.5000.430]\begin{bmatrix} 800 & 200 \\ 100 & 500 \end{bmatrix} \begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix}


02

Compute the determinant of ε\varepsilon

For a 2×22 \times 2 matrix M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, the determinant is det⁡(M)=ad−bc\det(M) = ad - bc:

det⁡(ε)=(800)(500)−(200)(100)=400,000−20,000=380,000\det(\varepsilon) = (800)(500) - (200)(100) = 400{,}000 - 20{,}000 = 380{,}000

Since det⁡(ε)≠0\det(\varepsilon) \neq 0, the inverse matrix ε−1\varepsilon^{-1} exists.


03

Find the inverse matrix ε−1\varepsilon^{-1}

The inverse of a 2×22 \times 2 matrix is given by:

M−1=1det⁡(M)[d−b−ca]M^{-1} = \frac{1}{\det(M)} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}

Applying this formula:

ε−1=1380,000[500−200−100800]=[53800−23800−1380083800]\varepsilon^{-1} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} = \begin{bmatrix} \frac{5}{3800} & -\frac{2}{3800} \\ -\frac{1}{3800} & \frac{8}{3800} \end{bmatrix}

Converting each entry to scientific notation:

ε−1≈[1.316×10−3−5.263×10−4−2.632×10−42.105×10−3]\varepsilon^{-1} \approx \begin{bmatrix} 1.316 \times 10^{-3} & -5.263 \times 10^{-4} \\ -2.632 \times 10^{-4} & 2.105 \times 10^{-3} \end{bmatrix}

Common Pitfall: When forming the adjugate of a 2×22 \times 2 matrix, remember to swap the main diagonal elements (aa and dd) and change the signs of the off-diagonal elements (bb and cc), rather than merely transposing the matrix.


04

Solve for the concentrations CC

Multiply both sides of εC=Aobs\varepsilon C = A_{\text{obs}} by ε−1\varepsilon^{-1}:

C=ε−1AobsC = \varepsilon^{-1} A_{\text{obs}}

[cXcY]=13800[5−2−18][0.5000.430]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{3800} \begin{bmatrix} 5 & -2 \\ -1 & 8 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix}

Compute each component:

cX=5(0.500)−2(0.430)3800=2.500−0.8603800=1.6403800≈4.32×10−4 Mc_X = \frac{5(0.500) - 2(0.430)}{3800} = \frac{2.500 - 0.860}{3800} = \frac{1.640}{3800} \approx 4.32 \times 10^{-4}\text{ M}

cY=−1(0.500)+8(0.430)3800=−0.500+3.4403800=2.9403800≈7.74×10−4 Mc_Y = \frac{-1(0.500) + 8(0.430)}{3800} = \frac{-0.500 + 3.440}{3800} = \frac{2.940}{3800} \approx 7.74 \times 10^{-4}\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the 2x2 matrix inversion formula by negating the main diagonal instead of the off-diagonal entries.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [800200100500][cXcY]=[0.5000.430]\begin{bmatrix} 800 & 200 \\ 100 & 500 \end{bmatrix} \begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix}

  2. Step 2

    det⁡(ε)=800(500)−200(100)=400000−20000=380000\det(\varepsilon) = 800(500) - 200(100) = 400000 - 20000 = 380000

  3. Step 3

    ε−1=(1380000)[−500200100−800]\varepsilon^{-1} = \left(\frac{1}{380000}\right) \begin{bmatrix} -500 & 200 \\ 100 & -800 \end{bmatrix}

    Correct

    ε−1=1380,000[500−200−100800]\varepsilon^{-1} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}

    To form the adjugate of [abcd]\begin{bmatrix} a & b \\ c & d \end{bmatrix}, you must swap the main diagonal entries (aa and dd) and negate the off-diagonal entries (−b-b and −c-c). You swapped and negated the main diagonal while leaving the off-diagonal entries positive.

  4. Step 4

    [cXcY]=(1380000)[−500200100−800][0.5000.430]=(1380000)[−164−294]⟹cX≈−4.316×10−4 mol/L, cY≈−7.737×10−4 mol/L\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \left(\frac{1}{380000}\right) \begin{bmatrix} -500 & 200 \\ 100 & -800 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix} = \left(\frac{1}{380000}\right) \begin{bmatrix} -164 \\ -294 \end{bmatrix} \Longrightarrow c_X \approx -4.316 \times 10^{-4}\text{ mol/L},\ c_Y \approx -7.737 \times 10^{-4}\text{ mol/L}

    Correct

    [cXcY]=1380,000[500−200−100800][0.5000.430]=[4.32×10−47.74×10−4] mol/L\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix} = \begin{bmatrix} 4.32 \times 10^{-4} \\ 7.74 \times 10^{-4} \end{bmatrix}\text{ mol/L}

    Your matrix multiplication steps follow logically from your inverse matrix, but the negative concentrations are an impossible physical result caused by the sign error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You translated the multi-wavelength Beer's Law problem into the correct matrix equation εC=Aobs\varepsilon C = A_{\text{obs}}.

You correctly computed the determinant det⁡(ε)=380,000\det(\varepsilon) = 380{,}000.

You carried out the matrix-vector multiplication and scalar division systematically.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Matrix Adjugate Sign Error

You accidentally placed the negative signs on the diagonal entries instead of the off-diagonal entries when writing down the adjugate matrix.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the two transformation rules of the 2×22 \times 2 inverse formula: the main diagonal entries swap positions without changing signs, whereas the off-diagonal entries keep their positions and change signs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Adjugate Rule for 2x2 Matrices
  • For M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, the adjugate is adj⁡(M)=[d−b−ca]\operatorname{adj}(M) = \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}.

  • Always say to yourself: 'Swap main diagonal, negate off-diagonal'.

Physical Reality Check
  • Chemical concentrations in solution must strictly be non-negative values (c≥0c \ge 0).

  • If your final concentration comes out negative, immediately re-check the signs in your inverse matrix and adjugate step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Swap the main diagonal entries (800800 and 500500) and negate the off-diagonal entries (200200 and 100100): adj⁡(ε)=[500−200−100800]\operatorname{adj}(\varepsilon) = \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}.

  2. Divide by det⁡(ε)=380,000\det(\varepsilon) = 380{,}000: ε−1=1380,000[500−200−100800]\varepsilon^{-1} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}.

  3. Multiply by the absorbance vector: [cXcY]=1380,000[500(0.500)−200(0.430)−100(0.500)+800(0.430)]=1380,000[164294]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380{,}000} \begin{bmatrix} 500(0.500) - 200(0.430) \\ -100(0.500) + 800(0.430) \end{bmatrix} = \frac{1}{380{,}000} \begin{bmatrix} 164 \\ 294 \end{bmatrix}.

Final answer

cX≈4.32×10−4 mol/Lc_X \approx 4.32 \times 10^{-4}\text{ mol/L}, cY≈7.74×10−4 mol/Lc_Y \approx 7.74 \times 10^{-4}\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'Swap main, change off' for 2×22 \times 2 matrix inversion.

  • Verify your inverse matrix by checking that εε−1=I\varepsilon \varepsilon^{-1} = I before multiplying by the target vector.

  • Perform a physical plausibility check whenever solving real-world applied systems.

OverviewACEpath Teacher's Diagnosis

02 The student adds the off-diagonal product instead of subtracting it when computing the determinant of the 2x2 matrix.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [800200100500][cXcY]=[0.5000.430]\begin{bmatrix} 800 & 200 \\ 100 & 500 \end{bmatrix} \begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix}

  2. Step 2

    det⁡(ε)=800(500)+200(100)=400000+20000=420000\det(\varepsilon) = 800(500) + 200(100) = 400000 + 20000 = 420000

    Correct

    det⁡(ε)=(800)(500)−(200)(100)=400,000−20,000=380,000\det(\varepsilon) = (800)(500) - (200)(100) = 400{,}000 - 20{,}000 = 380{,}000

    The determinant of a 2×22 \times 2 matrix [abcd]\begin{bmatrix} a & b \\ c & d \end{bmatrix} is ad−bcad - bc. You added 200(100)200(100) instead of subtracting it.

  3. Step 3

    ε−1=1420000[500−200−100800]\varepsilon^{-1} = \frac{1}{420000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}

    Correct

    ε−1=1380,000[500−200−100800]\varepsilon^{-1} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}

    You correctly swapped the main diagonal entries and negated the off-diagonal entries to form the adjugate, but the scalar factor carries your incorrect determinant value.

  4. Step 4

    [cXcY]=1420000[500−200−100800][0.5000.430]=1420000[250−86−50+344]=1420000[164294]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{420000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix} = \frac{1}{420000} \begin{bmatrix} 250 - 86 \\ -50 + 344 \end{bmatrix} = \frac{1}{420000} \begin{bmatrix} 164 \\ 294 \end{bmatrix}

    Correct

    [cXcY]=1380,000[500−200−100800][0.5000.430]=1380,000[164294]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix} = \frac{1}{380{,}000} \begin{bmatrix} 164 \\ 294 \end{bmatrix}

    Your matrix-vector multiplication was carried out with correct arithmetic, but it inherited the incorrect denominator from Step 2.

  5. Step 5

    cX≈3.905×10−4 mol/L,  cY≈7.000×10−4 mol/Lc_X \approx 3.905 \times 10^{-4}\text{ mol/L},\; c_Y \approx 7.000 \times 10^{-4}\text{ mol/L}

    Correct

    cX=164380,000≈4.32×10−4 mol/L,  cY=294380,000≈7.74×10−4 mol/Lc_X = \frac{164}{380{,}000} \approx 4.32 \times 10^{-4}\text{ mol/L},\; c_Y = \frac{294}{380{,}000} \approx 7.74 \times 10^{-4}\text{ mol/L}

    These values follow directly from dividing by 420,000420{,}000 rather than the correct determinant 380,000380{,}000.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the linear system as a matrix equation using Beer's Law.

You correctly identified the formula structure for the inverse of a 2×22 \times 2 matrix by swapping main diagonal entries and negating off-diagonal entries.

You carried out the matrix-vector multiplication accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Determinant Sign Error

You wrote ad+bcad + bc instead of ad−bcad - bc when expanding the 2×22 \times 2 determinant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the determinant formula det⁡[abcd]=ad−bc\det\begin{bmatrix} a & b \\ c & d \end{bmatrix} = ad - bc with an additive sum, likely by analogy with dot products or trace operations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the $2 \times 2$ determinant definition
  • For M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, det⁡(M)=(main diagonal product)−(off-diagonal product)=ad−bc\det(M) = \text{(main diagonal product)} - \text{(off-diagonal product)} = ad - bc.

  • Draw a downward diagonal arrow for +ad+ad and an upward diagonal arrow with an explicit minus sign for −bc-bc before performing arithmetic.

Verify inverse consistency
  • M⋅M−1=I=[1001]M \cdot M^{-1} = I = \begin{bmatrix} 1 & 0 \\ 0 & 1 \end{bmatrix}.

  • Compute the top-left product entry: 1det⁡(ad−bc)=1\frac{1}{\det}(ad - bc) = 1. If your determinant gave ad+bcad + bc, the product matrix would have entry ad−bcad+bc≠1\frac{ad - bc}{ad + bc} \neq 1 on the diagonal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute det⁡(ε)=(800)(500)−(200)(100)=400,000−20,000=380,000\det(\varepsilon) = (800)(500) - (200)(100) = 400{,}000 - 20{,}000 = 380{,}000.

  2. Form the correct inverse: ε−1=1380,000[500−200−100800]=[53800−23800−1380083800]\varepsilon^{-1} = \frac{1}{380{,}000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} = \begin{bmatrix} \frac{5}{3800} & -\frac{2}{3800} \\ -\frac{1}{3800} & \frac{8}{3800} \end{bmatrix}.

  3. Multiply ε−1Aobs\varepsilon^{-1} A_{\text{obs}}: [cXcY]=1380,000[164294]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380{,}000} \begin{bmatrix} 164 \\ 294 \end{bmatrix}.

Final answer

ε−1=[53800−23800−1380083800]≈[1.316×10−3−5.263×10−4−2.632×10−42.105×10−3]\varepsilon^{-1} = \begin{bmatrix} \frac{5}{3800} & -\frac{2}{3800} \\ -\frac{1}{3800} & \frac{8}{3800} \end{bmatrix} \approx \begin{bmatrix} 1.316 \times 10^{-3} & -5.263 \times 10^{-4} \\ -2.632 \times 10^{-4} & 2.105 \times 10^{-3} \end{bmatrix}, cX≈4.32×10−4 mol/Lc_X \approx 4.32 \times 10^{-4}\text{ mol/L}, cY≈7.74×10−4 mol/Lc_Y \approx 7.74 \times 10^{-4}\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the signs in the 2×22 \times 2 determinant formula: always subtract the product of the upward-sloping off-diagonal entries.

  • Perform a quick mental check by multiplying the first row of your original matrix by the first column of your proposed inverse to ensure it equals 11.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to swap the main diagonal entries when constructing the adjugate matrix for the inverse.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [800200100500][cXcY]=[0.5000.430]\begin{bmatrix} 800 & 200 \\ 100 & 500 \end{bmatrix} \begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix}

  2. Step 2

    det⁡(ε)=(800)(500)−(200)(100)=380000\det(\varepsilon) = (800)(500) - (200)(100) = 380000

  3. Step 3

    ε−1=1380000[800−200−100500]\varepsilon^{-1} = \frac{1}{380000} \begin{bmatrix} 800 & -200 \\ -100 & 500 \end{bmatrix}

    Correct

    ε−1=1380000[500−200−100800]\varepsilon^{-1} = \frac{1}{380000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}

    You negated the off-diagonal entries, but you forgot to swap the main diagonal elements 800800 and 500500.

  4. Step 4

    [cXcY]=1380000[800−200−100500][0.5000.430]  ⟹  [cXcY]=1380000[400−86−50+215]=1380000[314165]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380000} \begin{bmatrix} 800 & -200 \\ -100 & 500 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix} \implies \begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380000} \begin{bmatrix} 400 - 86 \\ -50 + 215 \end{bmatrix} = \frac{1}{380000} \begin{bmatrix} 314 \\ 165 \end{bmatrix}

    Correct

    [cXcY]=1380000[500−200−100800][0.5000.430]=1380000[250−86−50+344]=1380000[164294]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{380000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} \begin{bmatrix} 0.500 \\ 0.430 \end{bmatrix} = \frac{1}{380000} \begin{bmatrix} 250 - 86 \\ -50 + 344 \end{bmatrix} = \frac{1}{380000} \begin{bmatrix} 164 \\ 294 \end{bmatrix}

    Your matrix multiplication steps were carried out correctly, but the result was affected by the incorrect inverse matrix from Step 3.

  5. Step 5

    cX≈8.263×10−4 mol/L,cY≈4.342×10−4 mol/Lc_X \approx 8.263 \times 10^{-4}\text{ mol/L},\quad c_Y \approx 4.342 \times 10^{-4}\text{ mol/L}

    Correct

    cX≈4.32×10−4 mol/L,cY≈7.74×10−4 mol/Lc_X \approx 4.32 \times 10^{-4}\text{ mol/L},\quad c_Y \approx 7.74 \times 10^{-4}\text{ mol/L}

    Your final concentration values followed directly from the earlier error in the inverse matrix.

WHAT YOU DID WELL
Compliments from Your Teacher

You translated the multi-component Beer's Law system into matrix notation accurately.

You computed the determinant of the 2×22 \times 2 matrix without arithmetic slips.

You carried out matrix-vector multiplication with correct dot products and correct units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverting a $2 \times 2$ Matrix

You kept 800800 and 500500 in their original positions along the main diagonal instead of swapping them.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete application of the 2×22 \times 2 adjugate rule: finding [abcd]−1\begin{bmatrix} a & b \\ c & d \end{bmatrix}^{-1} requires both swapping the main diagonal elements (a↔da \leftrightarrow d) and negating the off-diagonal elements (−b,−c-b, -c).

REASONING PATH
Your ACEpath teacher’s suggested approach
Adjugate Formula for $2 \times 2$ Matrices
  • For matrix M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, the adjugate is adj⁡(M)=[d−b−ca]\operatorname{adj}(M) = \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}, so M−1=1det⁡(M)[d−b−ca]M^{-1} = \frac{1}{\det(M)} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}.

  • Check off two distinct actions every time you invert a 2×22 \times 2 matrix: (1) swap aa and dd, and (2) negate bb and cc.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write adj⁡(ε)\operatorname{adj}(\varepsilon) by swapping the diagonal elements 800800 and 500500, then negating 200200 and 100100: [500−200−100800]\begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix}.

  2. Form the correct inverse: ε−1=1380000[500−200−100800]=13800[5−2−18]\varepsilon^{-1} = \frac{1}{380000} \begin{bmatrix} 500 & -200 \\ -100 & 800 \end{bmatrix} = \frac{1}{3800} \begin{bmatrix} 5 & -2 \\ -1 & 8 \end{bmatrix}.

  3. Multiply by the absorbance vector: [cXcY]=13800[5(0.500)−2(0.430)−1(0.500)+8(0.430)]=13800[1.6402.940]\begin{bmatrix} c_X \\ c_Y \end{bmatrix} = \frac{1}{3800} \begin{bmatrix} 5(0.500) - 2(0.430) \\ -1(0.500) + 8(0.430) \end{bmatrix} = \frac{1}{3800} \begin{bmatrix} 1.640 \\ 2.940 \end{bmatrix}.

Final answer

cX≈4.32×10−4 mol/L,cY≈7.74×10−4 mol/Lc_X \approx 4.32 \times 10^{-4}\text{ mol/L},\quad c_Y \approx 7.74 \times 10^{-4}\text{ mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the two-step visual mnemonic for 2×22 \times 2 inverses: 'Swap main diagonal, flip signs of off-diagonal'.

  • Verify your inverse with a quick spot-check: multiply εε−1\varepsilon \varepsilon^{-1} to confirm the top-left entry evaluates to 11.

Lock it in

Similar question

01

Solve the matrix system for xx and yy using matrix inversion: [4312][xy]=[114]\begin{bmatrix} 4 & 3 \\ 1 & 2 \end{bmatrix} \begin{bmatrix} x \\ y \end{bmatrix} = \begin{bmatrix} 11 \\ 4 \end{bmatrix}.

Answer

x=2x = 2, y=1y = 1. Determinant is (4)(2)−(3)(1)=5(4)(2) - (3)(1) = 5. Inverse matrix is 15[2−3−14]\frac{1}{5}\begin{bmatrix} 2 & -3 \\ -1 & 4 \end{bmatrix}. Multiplying: [xy]=15[2(11)−3(4)−1(11)+4(4)]=15[105]=[21]\begin{bmatrix} x \\ y \end{bmatrix} = \frac{1}{5}\begin{bmatrix} 2(11) - 3(4) \\ -1(11) + 4(4) \end{bmatrix} = \frac{1}{5}\begin{bmatrix} 10 \\ 5 \end{bmatrix} = \begin{bmatrix} 2 \\ 1 \end{bmatrix}.

02

A binary dye solution has absorbances A1=0.80A_1 = 0.80 and A2=0.60A_2 = 0.60. With path length b=1 cmb = 1\text{ cm}, the absorptivity matrix is ε=[500100200400]\varepsilon = \begin{bmatrix} 500 & 100 \\ 200 & 400 \end{bmatrix}. Find the concentrations c1c_1 and c2c_2 in mol/L\text{mol}/\text{L}.

Answer

c1=1.44×10−3 Mc_1 = 1.44 \times 10^{-3}\text{ M}, c2=7.78×10−4 Mc_2 = 7.78 \times 10^{-4}\text{ M}. Determinant is (500)(400)−(100)(200)=180,000(500)(400) - (100)(200) = 180{,}000. Inverse matrix is 1180,000[400−100−200500]\frac{1}{180{,}000}\begin{bmatrix} 400 & -100 \\ -200 & 500 \end{bmatrix}. Thus c1=400(0.80)−100(0.60)180,000=260180,000≈1.44×10−3 Mc_1 = \frac{400(0.80) - 100(0.60)}{180{,}000} = \frac{260}{180{,}000} \approx 1.44 \times 10^{-3}\text{ M} and c2=−200(0.80)+500(0.60)180,000=140180,000≈7.78×10−4 Mc_2 = \frac{-200(0.80) + 500(0.60)}{180{,}000} = \frac{140}{180{,}000} \approx 7.78 \times 10^{-4}\text{ M}.

03

Determine the values of parameter kk for which the matrix A=[k42k−2]A = \begin{bmatrix} k & 4 \\ 2 & k-2 \end{bmatrix} is singular, and find A−1A^{-1} when k=5k = 5.

Answer

Singular when k=4k = 4 or k=−2k = -2; for k=5k = 5, A−1=17[3−4−25]A^{-1} = \frac{1}{7}\begin{bmatrix} 3 & -4 \\ -2 & 5 \end{bmatrix}. Step 1: det⁡(A)=k(k−2)−8=k2−2k−8=(k−4)(k+2)=0  ⟹  k=4,−2\det(A) = k(k-2) - 8 = k^2 - 2k - 8 = (k-4)(k+2) = 0 \implies k = 4, -2. Step 2: At k=5k = 5, det⁡(A)=7\det(A) = 7, and swapping the main diagonal while negating off-diagonal gives A−1=17[3−4−25]A^{-1} = \frac{1}{7}\begin{bmatrix} 3 & -4 \\ -2 & 5 \end{bmatrix}.

Loading workspace…