Resources

In a physics lab report on simple harmonic motion, a student fits displacement data to x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi) and differentiates to find acceleration: Step 1: Differentiate position x(t)=0.20cos⁡(4.0t)x(t) = 0.20\cos(4.0t) to find velocity: v(t)=dxdt=−0.20sin⁡(4.0t)v(t) = \frac{dx}{dt} = -0.20\sin(4.0t). Step 2: Differentiate velocity to find acceleration: a(t)=dvdt=−0.20cos⁡(4.0t)a(t) = \frac{dv}{dt} = -0.20\cos(4.0t). Step 3: Conclude that the maximum acceleration magnitude is amax=0.20 m/s2a_{\text{max}} = 0.20\text{ m/s}^2. Identify the calculus rule neglected in Step 1 and Step 2, pinpoint the affected consequence on amaxa_{\text{max}}, and calculate the correct theoretical maximum acceleration amaxa_{\text{max}} in m/s2\text{m/s}^2.

Answer and steps

Final answer

The chain rule was omitted during both differentiations (failing to multiply by ddt(4.0t)=4.0 rad/s\frac{d}{dt}(4.0t) = 4.0\text{ rad/s} each time); this caused the acceleration amplitude to be underestimated by a factor of ω2=16\omega^2 = 16; the correct maximum acceleration is amax=Aω2=(0.20 m)(4.0 rad/s)2=3.2 m/s2a_{\text{max}} = A\omega^2 = (0.20\text{ m})(4.0\text{ rad/s})^2 = 3.2\text{ m/s}^2.

Steps

Identifying the Error

To differentiate a composite function f(g(t))f(g(t)) with respect to tt, we must apply the chain rule:

ddt[f(g(t))]=f′(g(t))⋅g′(t)\frac{d}{dt}[f(g(t))] = f'(g(t)) \cdot g'(t)

In the student's work:

  • In Step 1, the inner function is g(t)=4.0tg(t) = 4.0t, whose derivative is ddt(4.0t)=4.0 rad/s\frac{d}{dt}(4.0t) = 4.0\text{ rad/s}. The student differentiated cos⁡(u)\cos(u) to get −sin⁡(u)-\sin(u), but omitted the factor of dudt=4.0\frac{du}{dt} = 4.0.
  • In Step 2, the student differentiated −sin⁡(4.0t)-\sin(4.0t) to get −cos⁡(4.0t)-\cos(4.0t), once again omitting the required factor of 4.04.0 from the inner derivative.

Therefore, the chain rule was neglected in both steps.


Consequence on the Maximum Acceleration

Each differentiation should introduce an angular frequency factor of ω=4.0 rad/s\omega = 4.0\text{ rad/s}:

  • Differentiating once multiplies the amplitude by ω\omega.
  • Differentiating twice multiplies the amplitude by ω2\omega^2.

Because the factor of ω=4.0\omega = 4.0 was omitted twice, the derived acceleration amplitude was underestimated by a factor of:

ω2=(4.0)2=16\omega^2 = (4.0)^2 = 16


Correct Derivation of amaxa_{\text{max}}

  1. Velocity: Apply the chain rule to x(t)=0.20cos⁡(4.0t)x(t) = 0.20\cos(4.0t):

v(t)=dxdt=−0.20⋅sin⁡(4.0t)⋅ddt(4.0t)=−0.20⋅4.0sin⁡(4.0t)=−0.80sin⁡(4.0t) m/sv(t) = \frac{dx}{dt} = -0.20 \cdot \sin(4.0t) \cdot \frac{d}{dt}(4.0t) = -0.20 \cdot 4.0\sin(4.0t) = -0.80\sin(4.0t)\text{ m/s}

  1. Acceleration: Apply the chain rule again to v(t)v(t):

a(t)=dvdt=−0.80⋅cos⁡(4.0t)⋅ddt(4.0t)=−0.80⋅4.0cos⁡(4.0t)=−3.2cos⁡(4.0t) m/s2a(t) = \frac{dv}{dt} = -0.80 \cdot \cos(4.0t) \cdot \frac{d}{dt}(4.0t) = -0.80 \cdot 4.0\cos(4.0t) = -3.2\cos(4.0t)\text{ m/s}^2

In general, for x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi), the acceleration is a(t)=−Aω2cos⁡(ωt+ϕ)a(t) = -A\omega^2\cos(\omega t + \phi).

  1. Maximum magnitude: The maximum value occurs when ∣cos⁡(4.0t)∣=1|\cos(4.0t)| = 1:

amax=Aω2=(0.20 m)(4.0 rad/s)2=0.20⋅16=3.2 m/s2a_{\text{max}} = A\omega^2 = (0.20\text{ m})(4.0\text{ rad/s})^2 = 0.20 \cdot 16 = 3.2\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student applies the chain rule only once when finding velocity but forgets to apply it again when differentiating velocity to find acceleration, resulting in a_max = 0.80 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The neglected rule is the chain rule.

  2. Step 2

    Neglecting it omits a factor of ω=4.0\omega = 4.0 in Step 2, underestimating amaxa_{\text{max}} by a factor of 4.04.0.

    Correct

    The chain rule was neglected in both Step 1 and Step 2, omitting a factor of ω=4.0\omega = 4.0 twice and underestimating amaxa_{\text{max}} by a factor of ω2=16\omega^2 = 16.

    In the prompt's lab report, Step 1 also omitted the factor of 4.04.0 (v(t)v(t) was given as −0.20sin⁡(4.0t)-0.20\sin(4.0t) instead of −0.80sin⁡(4.0t)-0.80\sin(4.0t)). Because the inner derivative was omitted in both steps, the overall amplitude was underestimated by ω2=4.02=16\omega^2 = 4.0^2 = 16, not 4.04.0.

  3. Step 3

    v(t)=−0.20(4.0)sin⁡(4.0t)=−0.80sin⁡(4.0t)  ⟹  a(t)=−0.80cos⁡(4.0t)v(t) = -0.20(4.0)\sin(4.0t) = -0.80\sin(4.0t) \implies a(t) = -0.80\cos(4.0t)

    Correct

    a(t)=dvdt=−0.80⋅4.0cos⁡(4.0t)=−3.2cos⁡(4.0t) m/s2a(t) = \frac{dv}{dt} = -0.80 \cdot 4.0\cos(4.0t) = -3.2\cos(4.0t)\text{ m/s}^2

    When differentiating v(t)=−0.80sin⁡(4.0t)v(t) = -0.80\sin(4.0t) to find acceleration a(t)a(t), you differentiated the outer sine function but forgot to multiply by the inner derivative ddt(4.0t)=4.0\frac{d}{dt}(4.0t) = 4.0 a second time.

  4. Step 4

    amax=0.80 m/s2a_{\text{max}} = 0.80\text{ m/s}^2

    Correct

    amax=3.2 m/s2a_{\text{max}} = 3.2\text{ m/s}^2

    Because the second factor of 4.04.0 was missing from your acceleration function, your final maximum acceleration was 0.80 m/s20.80\text{ m/s}^2 instead of 0.20×4.02=3.2 m/s20.20 \times 4.0^2 = 3.2\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly named the chain rule as the neglected calculus rule.

You successfully applied the chain rule to the first derivative to find the correct velocity function.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Repeated Chain Rule Omission

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the second derivative as an ordinary derivative of a basic trigonometric function rather than reapplying the chain rule to the inner linear function ωt\omega t.

REASONING PATH
Your ACEpath teacher’s suggested approach
Repeated Differentiations with Chain Rule
  • For composite functions f(ωt)f(\omega t), every single derivative with respect to tt produces an additional multiplicative factor of ω\omega: dndtn[cos⁡(ωt)]=ωn⋅[trig function]\frac{d^n}{dt^n}[\cos(\omega t)] = \omega^n \cdot [\text{trig function}].

  • When taking higher-order derivatives, circle the inner function (ωt)(\omega t) at every stage to verify that you multiply by its derivative ω\omega on each pass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. a(t)=ddt[−0.80sin⁡(4.0t)]=−0.80cos⁡(4.0t)⋅ddt(4.0t)=−3.2cos⁡(4.0t) m/s2a(t) = \frac{d}{dt}[-0.80\sin(4.0t)] = -0.80\cos(4.0t) \cdot \frac{d}{dt}(4.0t) = -3.2\cos(4.0t)\text{ m/s}^2

  2. amax=∣−3.2∣=3.2 m/s2a_{\text{max}} = |-3.2| = 3.2\text{ m/s}^2

Final answer

The chain rule was neglected in both steps, underestimating amaxa_{\text{max}} by a factor of ω2=16\omega^2 = 16; the correct maximum acceleration is amax=3.2 m/s2a_{\text{max}} = 3.2\text{ m/s}^2.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking second and third derivatives of trigonometric expressions with inner coefficients like sin⁡(kt)\sin(k t) or cos⁡(ωt)\cos(\omega t).

  • Double-check each differentiation step individually in multi-step physics derivations to ensure inner derivatives are never dropped.

OverviewACEpath Teacher's Diagnosis

02 A student multiplies by ω instead of ω² for acceleration by confusing maximum velocity with maximum acceleration, obtaining a_max = 0.80 m/s² from the formula a_max = Aω.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The student neglected the chain rule.

  2. Step 2

    The amplitude is missing a factor of ω=4.0\omega = 4.0.

    Correct

    Because the chain rule was omitted across two successive derivatives, the acceleration amplitude is missing a factor of ω2=(4.0)2=16\omega^2 = (4.0)^2 = 16.

    Each derivative with respect to time brings out an additional factor of ω\omega. Differentiating twice from position to acceleration means the acceleration magnitude is underestimated by a factor of ω2=16\omega^2 = 16, not just ω=4.0\omega = 4.0.

  3. Step 3

    amax=Aω  ⟹  amax=(0.20)(4.0)=0.80 m/s2a_{\text{max}} = A\omega \implies a_{\text{max}} = (0.20)(4.0) = 0.80\text{ m/s}^2

    Correct

    amax=Aω2=(0.20)(4.0)2=3.2 m/s2a_{\text{max}} = A\omega^2 = (0.20)(4.0)^2 = 3.2\text{ m/s}^2

    Because you only included one factor of ω\omega, you calculated the maximum velocity vmax=Aω=0.80 m/sv_{\text{max}} = A\omega = 0.80\text{ m/s} rather than the maximum acceleration amax=Aω2a_{\text{max}} = A\omega^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly diagnosed that the missing calculus principle was the chain rule.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Order of differentiation / $\omega$ scaling confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated acceleration as a single derivative of position instead of a second derivative, confusing the amplitude formula for maximum velocity (AωA\omega) with maximum acceleration (Aω2A\omega^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Count the successive derivatives
  • For harmonic motion x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi), each differentiation introduces one factor of ω\omega: v(t)=x′(t)v(t) = x'(t) has amplitude AωA\omega, while a(t)=x′′(t)a(t) = x''(t) has amplitude Aω2A\omega^2.

  • Always check the derivative order: velocity is the first derivative (scale by ω\omega), and acceleration is the second derivative (scale by ω2\omega^2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that acceleration is the second derivative: a(t)=d2xdt2=−Aω2cos⁡(ωt+ϕ)a(t) = \frac{d^2 x}{dt^2} = -A\omega^2\cos(\omega t + \phi).

  2. Identify that missing the chain rule twice underestimates the acceleration amplitude by ω2=(4.0)2=16\omega^2 = (4.0)^2 = 16.

  3. Compute the correct maximum acceleration: amax=Aω2=(0.20 m)(4.0 rad/s)2=3.2 m/s2a_{\text{max}} = A\omega^2 = (0.20\text{ m})(4.0\text{ rad/s})^2 = 3.2\text{ m/s}^2.

Final answer

The neglected rule is the chain rule; the acceleration amplitude was underestimated by a factor of ω2=16\omega^2 = 16; the correct maximum acceleration is amax=3.2 m/s2a_{\text{max}} = 3.2\text{ m/s}^2.

NEXT STEPS
Final Takeaways from Your Teacher
  • Track the derivative chain carefully: write out x(t)→ddtv(t)→ddta(t)x(t) \xrightarrow{\frac{d}{dt}} v(t) \xrightarrow{\frac{d}{dt}} a(t) step-by-step to count how many factors of the inner derivative ω\omega emerge.

  • Check units for kinematic amplitudes: AA is in m\text{m}, AωA\omega is in m/s\text{m/s}, and Aω2A\omega^2 is in m/s2\text{m/s}^2.

OverviewACEpath Teacher's Diagnosis

03 A student correctly recalls that the chain rule produces a factor of ω, but squares the amplitude instead of the angular frequency, calculating a_max = A²ω = 0.16 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The neglected rule is the chain rule.

  2. Step 2

    The maximum acceleration is missing the frequency factor from the inner derivative.

  3. Step 3

    amax=A2ω  ⟹  amax=(0.20)2(4.0)=0.16 m/s2a_{\text{max}} = A^2\omega \implies a_{\text{max}} = (0.20)^2(4.0) = 0.16\text{ m/s}^2

    Correct

    amax=Aω2=(0.20)(4.0)2=3.2 m/s2a_{\text{max}} = A\omega^2 = (0.20)(4.0)^2 = 3.2\text{ m/s}^2

    Each time you differentiate with respect to tt, the chain rule brings out a factor of ω\omega, not AA. Differentiating twice scales the amplitude by ω2\omega^2, giving amax=Aω2a_{\text{max}} = A\omega^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the chain rule was omitted during differentiation.

You recognized that the inner derivative introduces the angular frequency ω\omega.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Recall Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped which variable is squared in the harmonic motion amplitude formula, writing A2ωA^2\omega instead of Aω2A\omega^2. Differentiating position twice with respect to time brings out the inner derivative factor ω=ddt(ωt)\omega = \frac{d}{dt}(\omega t) twice, while the original amplitude AA remains linear.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Chain Rule Factors
  • ddt[Acos⁡(ωt)]=−Aωsin⁡(ωt)\frac{d}{dt}[A\cos(\omega t)] = -A\omega\sin(\omega t) and d2dt2[Acos⁡(ωt)]=−Aω2cos⁡(ωt)\frac{d^2}{dt^2}[A\cos(\omega t)] = -A\omega^2\cos(\omega t)

  • Confirm that each time derivative introduces an extra factor of ω\omega, so acceleration amplitude is always Aω2A\omega^2.

Dimensional Analysis Sanity Check
  • [A]=m[A] = \text{m}, [ω]=rad/s=s−1[\omega] = \text{rad/s} = \text{s}^{-1}, so [Aω2]=m/s2[A\omega^2] = \text{m}/\text{s}^2, whereas [A2ω]=m2/s[A^2\omega] = \text{m}^2/\text{s}

  • Check your units: acceleration must have units of m/s2\text{m/s}^2, which immediately rules out A2ωA^2\omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t) twice using the chain rule: v(t)=−Aωsin⁡(ωt)v(t) = -A\omega\sin(\omega t) and a(t)=−Aω2cos⁡(ωt)a(t) = -A\omega^2\cos(\omega t).

  2. Take the maximum magnitude: amax=Aω2a_{\text{max}} = A\omega^2.

  3. Substitute A=0.20 mA = 0.20\text{ m} and ω=4.0 rad/s\omega = 4.0\text{ rad/s}: amax=(0.20)(4.0)2=0.20×16=3.2 m/s2a_{\text{max}} = (0.20)(4.0)^2 = 0.20 \times 16 = 3.2\text{ m/s}^2.

Final answer

amax=3.2 m/s2a_{\text{max}} = 3.2\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify formulas using dimensional analysis (checking that units equal m/s2\text{m/s}^2).

  • Derive velocity and acceleration step-by-step from x(t)x(t) with explicit chain rule factors rather than relying solely on memorized shortcuts.

Lock it in

Similar question

01

A particle moves according to x(t)=3.0sin⁡(2.0t)x(t) = 3.0\sin(2.0t). Find its velocity v(t)v(t), its acceleration a(t)a(t), and its maximum acceleration amaxa_{\text{max}}.

Answer

v(t)=dxdt=3.0(2.0)cos⁡(2.0t)=6.0cos⁡(2.0t) m/sv(t) = \frac{dx}{dt} = 3.0(2.0)\cos(2.0t) = 6.0\cos(2.0t)\text{ m/s}. Differentiating again with the chain rule gives a(t)=6.0(−2.0)sin⁡(2.0t)=−12sin⁡(2.0t) m/s2a(t) = 6.0(-2.0)\sin(2.0t) = -12\sin(2.0t)\text{ m/s}^2. Therefore, amax=12 m/s2a_{\text{max}} = 12\text{ m/s}^2.

02

In a vibration analysis, displacement is given by y(t)=0.10cos⁡(10t)y(t) = 0.10\cos(10t). A student calculates amax=1.0 m/s2a_{\text{max}} = 1.0\text{ m/s}^2. Identify the student's error, determine the factor by which amaxa_{\text{max}} was miscalculated, and find the true amaxa_{\text{max}}.

Answer

The student applied the chain rule only once (getting 0.10×10=1.00.10 \times 10 = 1.0) instead of twice (0.10×102=100.10 \times 10^2 = 10). The value was underestimated by a factor of ω=10\omega = 10. The correct maximum acceleration is amax=0.10×102=10 m/s2a_{\text{max}} = 0.10 \times 10^2 = 10\text{ m/s}^2.

03

An oscillating mass has position x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi). If the maximum speed is vmax=1.5 m/sv_{\text{max}} = 1.5\text{ m/s} and the maximum acceleration is amax=9.0 m/s2a_{\text{max}} = 9.0\text{ m/s}^2, find the angular frequency ω\omega and the amplitude AA.

Answer

Since vmax=Aωv_{\text{max}} = A\omega and amax=Aω2a_{\text{max}} = A\omega^2, dividing them gives ω=amaxvmax=9.01.5=6.0 rad/s\omega = \frac{a_{\text{max}}}{v_{\text{max}}} = \frac{9.0}{1.5} = 6.0\text{ rad/s}. Then amplitude A=vmaxω=1.56.0=0.25 mA = \frac{v_{\text{max}}}{\omega} = \frac{1.5}{6.0} = 0.25\text{ m}.

Loading workspace…