Resources
A civil engineer designs an open-topped rectangular concrete drainage channel of length with a rectangular cross-section of width and water depth . The cross-sectional wetted perimeter is given by and the cross-sectional flow area is . Due to precast formwork limits, the total wetted perimeter cannot exceed . Hydraulic efficiency requires , while freeboard structural stability imposes the physical non-negativity boundaries and . By formulating the constraint boundary equation , determine the critical threshold discriminant of the resulting quadratic relation in , and state whether an allowable parameter domain exists for that satisfies both and .
Answer and steps
Final answer
Quadratic equation on boundary: ; Discriminant: ; Allowable parameter interval: (corresponding to )
Steps
Express Width in Terms of Depth Using the Perimeter Boundary
The total wetted perimeter constraint is , where:
To investigate whether any configuration satisfies the area requirement, consider the upper boundary of the wetted perimeter:
Because physical dimensions must be positive ( and ), depth is restricted to:
Formulate the Quadratic Area Relation
Substitute the expression for into the flow area formula :
The hydraulic efficiency requirement specifies that :
Rearranging into standard quadratic inequality form gives:
Calculate the Discriminant
For the quadratic equation representing the boundary of this region, , identify the coefficients:
Calculate the discriminant :
Since , the quadratic equation has two distinct real roots.
Determine the Allowable Parameter Domain
Find the boundary roots using the quadratic formula:
This yields:
Because the parabola opens upward (), the values satisfying lie between the roots:
Evaluating the corresponding width :
- For :
- For :
Thus, an allowable domain exists for both dimensions:
Typical errors
01 The student misremembers the discriminant formula as b² - 2ac instead of b² - 4ac, altering the discriminant value while still finding real roots.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used the factor instead of in the second term of the discriminant formula. The correct formula is , which yields .
- Step 3Correct
Your qualitative conclusion is correct because the true discriminant is also positive, but this step inherited your incorrect discriminant calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly expressed the channel width in terms of depth using the wetted perimeter boundary.
You accurately formulated the hydraulic area constraint into a standard quadratic inequality.
You recognized that a positive discriminant indicates the existence of real solution roots.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally wrote the second term of the discriminant as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the coefficient in the discriminant formula with the denominator factor from the quadratic formula.
REASONING PATH
Your ACEpath teacher’s suggested approach- Recall the complete quadratic discriminant formula
For a quadratic equation , the discriminant is .
Always double-check that the second term subtracts four times the product of and , not two times.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the full discriminant formula: .
Find the boundary depths using the quadratic formula: .
This yields and .
Because the parabola opens upward, the allowable parameter domain is .
; an allowable parameter domain exists ().
02 The student moves terms across the inequality sign without reversing or correctly matching signs, obtaining 2d² - 6d - 4 = 0 and evaluating Δ as 68.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When rearranging into standard form, adding and subtracting from both sides gives . The constant term remains positive; it does not change to .
- Step 3Correct
You calculated the discriminant accurately using your equation's coefficients, but because of the sign error on the constant term , you obtained instead of .
- Step 4Correct
Your conclusion that an allowable domain exists is qualitatively correct because , but it rests on the incorrect discriminant value and does not verify whether the resulting roots satisfy the physical positivity bounds and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly isolated from the perimeter constraint boundary .
You successfully substituted into the area formula to create a single-variable inequality in .
You correctly recalled and applied the quadratic discriminant formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou changed the sign of the constant to when moving the other terms to its side of the relation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing which terms cross the inequality sign versus which term remains in place when transforming into standard form .
REASONING PATH
Your ACEpath teacher’s suggested approach- Keep stationary terms intact
When moving terms to one side of an inequality, terms that remain on their original side retain their original sign.
From , move all terms to the right by adding and subtracting : , leaving unchanged.
- Verify boundary root feasibility
In physical modeling, positive discriminants must yield roots that comply with physical domain bounds ( and ).
Always find the explicit boundary roots to ensure they lie within the feasible geometric interval .
CORRECTED PATH
ACEpath Teacher's DemonstrationRearrange by moving all terms to the right side: , or .
Identify the coefficients of the boundary equation : , , .
Compute the discriminant: .
Solve for the boundary depths: , giving and .
Since , the inequality holds between the roots: . Both depths yield positive widths (), confirming that an allowable parameter domain exists.
Boundary quadratic: ; Discriminant: ; An allowable parameter domain exists ().
03 The student forgets that the channel has two wet side walls and uses the closed perimeter formula P = 2w + 2d, resulting in a negative discriminant and incorrectly concluding no allowable domain exists.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
An open-topped drainage channel only has water contacting the bottom and the two vertical sides, so the wetted perimeter has only one width: rather than .
- Step 2Correct
Your substitution and algebraic rearrangement followed logically from your expression for , but inherited the incorrect relation.
- Step 3Correct
You calculated the discriminant accurately for your quadratic, but the correct quadratic yields .
- Step 4
Since , no allowable parameter domain exists.
CorrectSince , an allowable parameter domain exists: (with ).
Because your discriminant was negative, you concluded no solution existed; with the correct boundary equation, yields a valid physical range between the roots.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly substituted the expression for width into the area formula.
You rearranged the inequality into standard quadratic form with correct signs.
You accurately applied the discriminant formula to your quadratic equation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou modeled the perimeter as a closed four-sided rectangle () rather than an open three-sided channel ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the physical geometry of an 'open-topped' channel and defaulting to the standard geometric perimeter formula for a closed rectangle.
REASONING PATH
Your ACEpath teacher’s suggested approach- Count the Contact Surfaces
Wetted perimeter measures only the boundary where fluid touches the channel wall and bed: .
Always sketch the cross-section and highlight only the boundaries in contact with the fluid before writing the perimeter equation.
- Verify Model Assumptions
Open structures have fewer bounding edges than closed polygons.
Check the problem description for keywords like 'open-topped', 'gutter', or 'trough' to ensure no 'lid' edge is added.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the boundary equation using the open-channel wetted perimeter: .
Substitute into the flow area inequality: .
Expand and rearrange: .
Calculate the discriminant: .
Solve for the roots: , giving and .
; an allowable domain exists for depth : (corresponding to ).
Lock it in
What is the standard formula for the discriminant of the quadratic equation ?
. Remember that the second term is multiplied by , not .
Similar question
A rectangular storage pen is enclosed along a barn wall such that its perimeter without the wall is , where is the length and is the width. If the enclosed area must satisfy , write the boundary quadratic equation in standard form and calculate its discriminant .
Answer
Substituting yields , which rearranges to . For the boundary equation , the discriminant is .
A civil engineer designs an open rectangular flume with wetted perimeter and flow area . Determine the discriminant of the boundary quadratic in and state whether an allowable real depth exists.
Answer
Substituting gives . The discriminant is . Because and the parabola opens upward, the inequality has no real solutions; hence no allowable depth domain exists.
An open rectangular channel has a fixed wetted perimeter constraint and requires a minimum flow area . Derive the critical discriminant in terms of and , and determine the maximum required area for which an allowable physical configuration still exists.
Answer
Substituting into yields . The boundary discriminant is . An allowable real configuration exists when , which requires , meaning the maximum feasible area is .