Resources

An automated deep-sea probe descends vertically into an oceanic trench. Its vertical position relative to sea level (where s=0 ms = 0\text{ m} represents the surface and positive values represent elevation above sea level) is given by s(t)=−0.25t2−4.0ts(t) = -0.25t^2 - 4.0t, where tt is measured in minutes. At t=20 minutest = 20\text{ minutes}, evaluating the derivatives yields velocity v(20)=s′(20)=−14.0 m/minv(20) = s'(20) = -14.0\text{ m/min} and acceleration a(20)=s′′(20)=−0.50 m/min2a(20) = s''(20) = -0.50\text{ m/min}^2. A student claims that because acceleration is negative, the probe is slowing down. Correct this claim by explaining the physical relationship between the signs of velocity and acceleration.

Answer and steps

Final answer

The student's claim is incorrect. Because velocity v(20)=−14.0 m/minv(20) = -14.0\text{ m/min} and acceleration a(20)=−0.50 m/min2a(20) = -0.50\text{ m/min}^2 share the same negative sign, the acceleration vector acts in the exact same downward direction as the motion, meaning the probe is speeding up downward at a rate of 0.50 m/min20.50\text{ m/min}^2 rather than slowing down.

Steps

Understanding Velocity, Speed, and Acceleration

In one-dimensional motion, the sign of a quantity indicates its direction relative to a chosen coordinate system, not necessarily an increase or decrease in speed:

  • A positive sign (++) represents motion or force in the defined positive direction (upward, toward positive elevation).
  • A negative sign (−-) represents motion or force in the defined negative direction (downward, deeper into the trench).

Speed is the magnitude of velocity: Speed=∣v(t)∣\text{Speed} = |v(t)|

An object is:

  • Speeding up if its speed ∣v(t)∣|v(t)| is increasing.
  • Slowing down if its speed ∣v(t)∣|v(t)| is decreasing.

Analyzing the Probe at t=20 minutest = 20\text{ minutes}

From the given values:

  • Velocity: v(20)=−14.0 m/minv(20) = -14.0\text{ m/min}
  • Acceleration: a(20)=−0.50 m/min2a(20) = -0.50\text{ m/min}^2
  1. Direction of Motion: Because v(20)<0v(20) < 0, the probe is descending (moving downward) at an instantaneous speed of ∣−14.0∣=14.0 m/min|{-14.0}| = 14.0\text{ m/min}.
  2. Direction of Acceleration: Because a(20)<0a(20) < 0, the acceleration acts in the downward direction.

The Sign Rule for Speeding Up vs. Slowing Down

To determine whether an object is speeding up or slowing down, compare the signs of velocity and acceleration:

  • Same Sign (vv and aa are both positive or both negative):
    Acceleration pushes in the same direction as the motion. This increases the magnitude of velocity, meaning the object is speeding up. ddt(∣v(t)∣2)=2⋅v(t)⋅a(t)>0\frac{d}{dt}\left(|v(t)|^2\right) = 2 \cdot v(t) \cdot a(t) > 0
  • Opposite Signs (one positive, one negative):
    Acceleration opposes the motion, reducing the magnitude of velocity, meaning the object is slowing down.

Common Pitfall and Conclusion

A common mistake is assuming that a negative acceleration always means "decelerating" or "slowing down." In reality, a negative sign merely indicates that the acceleration vector points downward.

Because both v(20)=−14.0 m/minv(20) = -14.0\text{ m/min} and a(20)=−0.50 m/min2a(20) = -0.50\text{ m/min}^2 are negative, the acceleration acts in the same downward direction as the probe's descent. Therefore, the student's claim is incorrect: the probe is speeding up downward at a rate of 0.50 m/min20.50\text{ m/min}^2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses negative acceleration with slowing down by ignoring the sign of velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    The claim is correct because a(20)=−0.50 m/min2<0a(20) = -0.50\text{ m/min}^2 < 0.   ⟹  \implies Negative acceleration always means deceleration.

    Correct

    The claim is incorrect. An object speeds up when velocity and acceleration share the same sign, and slows down only when they have opposite signs.

    In physics, the sign of acceleration alone only gives its direction along the coordinate axis. A negative acceleration points downward; it does not automatically mean deceleration or slowing down.

  2. Step 2

    Therefore, the probe is slowing down.

    Correct

    Because both v(20)=−14.0 m/minv(20) = -14.0\text{ m/min} and a(20)=−0.50 m/min2a(20) = -0.50\text{ m/min}^2 are negative, they act in the same downward direction, meaning the probe is speeding up.

    Because your rule in the previous step was incorrect, your final conclusion that the probe is slowing down is also incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the sign of the acceleration at t=20 minutest = 20\text{ minutes} as negative.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign of acceleration equated with slowing down

You equated negative acceleration directly with deceleration without checking the sign of velocity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In one-dimensional kinematics, signs indicate direction relative to the chosen reference frame rather than an increase or decrease in speed. Speed ∣v(t)∣|v(t)| increases whenever velocity and acceleration point in the same direction (v⋅a>0v \cdot a > 0) and decreases only when they oppose each other (v⋅a<0v \cdot a < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Rule for Speeding Up vs. Slowing Down
  • An object is speeding up if v(t)v(t) and a(t)a(t) share the same sign (v⋅a>0v \cdot a > 0). An object is slowing down if v(t)v(t) and a(t)a(t) have opposite signs (v⋅a<0v \cdot a < 0).

  • Always compare the sign of v(t)v(t) to the sign of a(t)a(t) before concluding whether speed is increasing or decreasing.

Coordinate Meaning of Signs
  • A negative sign indicates motion or force in the negative coordinate direction (here, downward into the trench).

  • Interpret a negative acceleration as an acceleration directed downward, not as an inherent loss of speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the given values and their signs: v(20)=−14.0 m/min<0v(20) = -14.0\text{ m/min} < 0 and a(20)=−0.50 m/min2<0a(20) = -0.50\text{ m/min}^2 < 0.

  2. Determine the physical direction: both velocity and acceleration vectors point downward (in the negative direction).

  3. Apply the sign test for speed: since both v(20)v(20) and a(20)a(20) are negative, their product is positive (v⋅a>0v \cdot a > 0), meaning acceleration acts in the same direction as motion.

Final answer

The student's claim is incorrect. Because velocity v(20)=−14.0 m/minv(20) = -14.0\text{ m/min} and acceleration a(20)=−0.50 m/min2a(20) = -0.50\text{ m/min}^2 have the same negative sign, the acceleration acts in the same direction as the motion, so the probe is speeding up downward at 0.50 m/min20.50\text{ m/min}^2 rather than slowing down.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between velocity (a vector with direction) and speed (the magnitude of velocity, ∣v∣|v|).

  • Practice checking both v(t)v(t) and a(t)a(t) simultaneously whenever evaluating whether an object is speeding up or slowing down.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the relationship by incorrectly claiming that having the same sign causes cancellation, leading to the wrong conclusion that the probe slows down.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(20)=−14.0 m/minv(20) = -14.0\text{ m/min} and a(20)=−0.50 m/min2a(20) = -0.50\text{ m/min}^2

  2. Step 2

    Because both values are negative, the negative acceleration opposes the negative motion.

    Correct

    Because both values are negative, the acceleration vector points in the same downward direction as the motion.

    Vectors with the same sign point in the same direction. Since both are negative, acceleration acts in the same downward direction as the probe's descent rather than opposing it.

  3. Step 3

    When velocity and acceleration have the same sign, they resist each other, so the probe is slowing down.

    Correct

    When velocity and acceleration share the same sign, the acceleration increases the magnitude of velocity, so the probe is speeding up.

    Because your premise in Step 2 was reversed, your final conclusion was affected. When velocity and acceleration share the same direction, speed ∣v(t)∣|v(t)| increases, so the probe is speeding up downward.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly identified and wrote down the values of velocity and acceleration at t=20 minutest = 20\text{ minutes}.

You recognized that comparing the signs of velocity and acceleration is the key to determining changes in speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misinterpretation of Vector Sign Alignment

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated matching negative signs as opposing or canceling forces rather than recognizing that signs in 1D kinematics represent physical direction, where matching signs mean motion and acceleration point in the exact same direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Signs Represent 1D Directions
  • In one-dimensional kinematics, a negative sign indicates direction along the chosen coordinate axis, not whether an object resists motion.

  • Always translate algebraic signs into physical direction arrows before deciding whether vectors assist or oppose each other.

Speeding Up vs. Slowing Down Test
  • An object speeds up when v(t)⋅a(t)>0v(t) \cdot a(t) > 0 (same signs) and slows down when v(t)⋅a(t)<0v(t) \cdot a(t) < 0 (opposite signs).

  • Check if the signs match: matching signs mean acceleration pushes in the direction of motion, increasing speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that v(20)=−14.0 m/min<0v(20) = -14.0\text{ m/min} < 0, which means the probe moves downward at 14.0 m/min14.0\text{ m/min}.

  2. Observe that a(20)=−0.50 m/min2<0a(20) = -0.50\text{ m/min}^2 < 0, which means the acceleration also points downward.

  3. Because both vectors point downward, the acceleration pushes in the direction of motion, increasing the downward speed by 0.50 m/min0.50\text{ m/min} each minute.

Final answer

The student's claim is incorrect. Because velocity and acceleration are both negative, they act in the same downward direction, meaning the probe is speeding up at a rate of 0.50 m/min20.50\text{ m/min}^2 rather than slowing down.

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a vertical axis showing downward arrows for both velocity and acceleration whenever you work with descent problems.

  • Practice using the sign-product rule v(t)⋅a(t)v(t) \cdot a(t) to quickly confirm whether speed is increasing or decreasing.

Lock it in

Similar question

01

A weather balloon rises vertically with vertical position y(t)y(t) defined such that upward is positive. At a certain moment, v(t)=8.0 m/sv(t) = 8.0\text{ m/s} and a(t)=−1.2 m/s2a(t) = -1.2\text{ m/s}^2. Is the balloon speeding up or slowing down? Explain using vector directions.

Answer

Slowing down. Velocity is positive (upward) while acceleration is negative (downward). Because velocity and acceleration have opposite signs (v⋅a<0v \cdot a < 0), acceleration opposes the motion, decreasing the balloon's speed.

02

A car travels along a straight east-west road where east is defined as the positive direction. The car has velocity v(t)=−22 m/sv(t) = -22\text{ m/s} and the driver presses the brake, causing an acceleration of a(t)=+3.5 m/s2a(t) = +3.5\text{ m/s}^2. Determine whether the car is speeding up or slowing down, and describe the direction of motion and acceleration.

Answer

Slowing down. The car is moving west because v(t)<0v(t) < 0. The acceleration points east because a(t)>0a(t) > 0. Because vv and aa have opposite signs, the car is decelerating (slowing down) toward rest.

03

A particle moves along the xx-axis with position x(t)=t3−6t2+9tx(t) = t^3 - 6t^2 + 9t for t≥0t \ge 0. Find the time intervals on which the particle is speeding up.

Answer

Speeding up on (1,2)∪(3,∞)(1, 2) \cup (3, \infty). Velocity is v(t)=3(t−1)(t−3)v(t) = 3(t - 1)(t - 3) and acceleration is a(t)=6(t−2)a(t) = 6(t - 2). Constructing a sign chart shows vv and aa share the same sign when both are negative for t∈(1,2)t \in (1, 2) and when both are positive for t∈(3,∞)t \in (3, \infty).

Loading workspace…