Resources

An analytical chemist is fitting spectrophotometric absorbance data to select between an exponential decay model A(t)=A0e−ktA(t) = A_0 e^{-kt} and a linear degradation model A(t)=−mt+A0A(t) = -mt + A_0. Standard laboratory software linearizes exponential data using the semi-log transformation Y=ln⁡(A)Y = \ln(A) versus tt. The recorded absorbance values at times t=0,10,20,30 minutest = 0, 10, 20, 30\text{ minutes} are 1.0001.000, 0.60650.6065, 0.36790.3679, and 0.22310.2231. A student incorrectly plots AA versus tt on Cartesian axes and asserts that the decay is linear because the slope between the first two points is negative (ΔA/Δt=−0.03935 min−1\Delta A / \Delta t = -0.03935\text{ min}^{-1}). Identify the correct underlying model type by computing the consecutive slopes of ln⁡[A(t)]\ln[A(t)], and find the exact decay constant kk in min−1\text{min}^{-1} accounting for the negative sign convention in A′(t)=−kA(t)A'(t) = -k A(t).

Answer and steps

Final answer

Model type: Exponential decay; Decay constant: k=0.0500 min−1k = 0.0500\text{ min}^{-1}; Model equation: A(t)=1.000e−0.0500tA(t) = 1.000 e^{-0.0500t}

Steps

01

Test for Linearity in Cartesian Space

A linear degradation model A(t)=−mt+A0A(t) = -mt + A_0 requires a constant rate of change ΔAΔt\frac{\Delta A}{\Delta t} across all time intervals.

Calculate the rate of change for each consecutive interval:

  • For t∈[0,10]t \in [0, 10]: ΔAΔt=0.6065−1.00010−0=−0.03935 min−1\frac{\Delta A}{\Delta t} = \frac{0.6065 - 1.000}{10 - 0} = -0.03935\text{ min}^{-1}
  • For t∈[10,20]t \in [10, 20]: ΔAΔt=0.3679−0.606520−10=−0.02386 min−1\frac{\Delta A}{\Delta t} = \frac{0.3679 - 0.6065}{20 - 10} = -0.02386\text{ min}^{-1}
  • For t∈[20,30]t \in [20, 30]: ΔAΔt=0.2231−0.367930−20=−0.01448 min−1\frac{\Delta A}{\Delta t} = \frac{0.2231 - 0.3679}{30 - 20} = -0.01448\text{ min}^{-1}

Common Pitfall: A negative slope between two points merely indicates that the quantity is decreasing; it does not prove linearity. Because the magnitude of the slope decreases over time (∣−0.03935∣>∣−0.02386∣>∣−0.01448∣|-0.03935| > |-0.02386| > |-0.01448|), the degradation rate slows down as concentration drops, ruling out a linear model.


02

Semi-Log Transformation and Slope Evaluation

For an exponential decay model A(t)=A0e−ktA(t) = A_0 e^{-kt}, taking the natural logarithm of both sides linearizes the equation: ln⁡[A(t)]=ln⁡(A0)−kt\ln[A(t)] = \ln(A_0) - kt

Let Y(t)=ln⁡[A(t)]Y(t) = \ln[A(t)]. The slope of Y(t)Y(t) with respect to tt should be constant and equal to −k-k.

Compute the transformed values Y(t)=ln⁡[A(t)]Y(t) = \ln[A(t)] at each time point:

  • Y(0)=ln⁡(1.000)=0.0000Y(0) = \ln(1.000) = 0.0000
  • Y(10)=ln⁡(0.6065)≈−0.5000Y(10) = \ln(0.6065) \approx -0.5000
  • Y(20)=ln⁡(0.3679)≈−1.0000Y(20) = \ln(0.3679) \approx -1.0000
  • Y(30)=ln⁡(0.2231)≈−1.5000Y(30) = \ln(0.2231) \approx -1.5000

Now calculate the consecutive slopes ΔYΔt\frac{\Delta Y}{\Delta t}:

  • For t∈[0,10]t \in [0, 10]: ΔYΔt=−0.5000−0.000010−0=−0.0500 min−1\frac{\Delta Y}{\Delta t} = \frac{-0.5000 - 0.0000}{10 - 0} = -0.0500\text{ min}^{-1}
  • For t∈[10,20]t \in [10, 20]: ΔYΔt=−1.0000−(−0.5000)20−10=−0.0500 min−1\frac{\Delta Y}{\Delta t} = \frac{-1.0000 - (-0.5000)}{20 - 10} = -0.0500\text{ min}^{-1}
  • For t∈[20,30]t \in [20, 30]: ΔYΔt=−1.5000−(−1.0000)30−20=−0.0500 min−1\frac{\Delta Y}{\Delta t} = \frac{-1.5000 - (-1.0000)}{30 - 20} = -0.0500\text{ min}^{-1}

Because the rate of change of ln⁡[A(t)]\ln[A(t)] is constant across all intervals, the underlying process is an exponential decay model.


03

Determine the Decay Constant and Model Equation

From the differential equation A′(t)=−kA(t)A'(t) = -k A(t) and its solution A(t)=A0e−ktA(t) = A_0 e^{-kt}: Slope=ddtln⁡[A(t)]=−k\text{Slope} = \frac{d}{dt}\ln[A(t)] = -k

Equating the linearized slope to −k-k: −k=−0.0500 min−1  ⟹  k=0.0500 min−1-k = -0.0500\text{ min}^{-1} \implies k = 0.0500\text{ min}^{-1}

With initial absorbance A0=1.000A_0 = 1.000, the complete model is: A(t)=1.000e−0.0500tA(t) = 1.000 e^{-0.0500t}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the slope of ln(A) versus t is equal to -k and concludes that k is negative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ln⁡(1.000)=0  ⟹  ln⁡(0.6065)=−0.5000  ⟹  ln⁡(0.3679)=−1.0000  ⟹  ln⁡(0.2231)=−1.5000\ln(1.000) = 0 \implies \ln(0.6065) = -0.5000 \implies \ln(0.3679) = -1.0000 \implies \ln(0.2231) = -1.5000

  2. Step 2

    Slope 1: (−0.5000−0)/10=−0.05 min−1  ⟹  Slope 2: (−1.0000−(−0.5000))/10=−0.05 min−1  ⟹  Slope 3: (−1.5000−(−1.0000))/10=−0.05 min−1\text{Slope 1: } (-0.5000 - 0)/10 = -0.05\text{ min}^{-1} \implies \text{Slope 2: } (-1.0000 - (-0.5000))/10 = -0.05\text{ min}^{-1} \implies \text{Slope 3: } (-1.5000 - (-1.0000))/10 = -0.05\text{ min}^{-1}

  3. Step 3

    The slopes of ln⁡(A)\ln(A) are constant, so the correct model is exponential decay.

  4. Step 4

    k=slope=−0.05 min−1k = \text{slope} = -0.05\text{ min}^{-1}

    Correct

    slope=−k=−0.0500 min−1  ⟹  k=0.0500 min−1\text{slope} = -k = -0.0500\text{ min}^{-1} \implies k = 0.0500\text{ min}^{-1}

    In the exponential decay model A(t)=A0e−ktA(t) = A_0 e^{-kt}, taking natural logs gives ln⁡[A(t)]=ln⁡(A0)−kt\ln[A(t)] = \ln(A_0) - kt. Thus, the slope of ln⁡(A)\ln(A) versus tt is −k-k, not kk. Setting −k=−0.05 min−1-k = -0.05\text{ min}^{-1} gives k=0.05 min−1k = 0.05\text{ min}^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly transformed the raw data into logarithmic coordinates.

You calculated all consecutive slopes accurately to confirm linearity in semi-log space.

You correctly concluded that the underlying system represents exponential decay.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in linearized decay parameters

You equated kk directly to the negative slope of the semi-log plot rather than accounting for the negative sign in the decay exponent.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the slope of the linearized line y=mx+by = mx + b with the decay constant kk in A(t)=A0e−ktA(t) = A_0 e^{-kt}. Because the linearized form is ln⁡(A)=−kt+ln⁡(A0)\ln(A) = -kt + \ln(A_0), the linear slope mm equals −k-k, requiring k=−m>0k = -m > 0 for decay.

REASONING PATH
Your ACEpath teacher’s suggested approach
Decay Rate Constant Sign Convention
  • In standard first-order decay models A′(t)=−kA(t)A'(t) = -kA(t) and A(t)=A0e−ktA(t) = A_0 e^{-kt}, the rate constant kk is defined as a positive quantity (k>0k > 0).

  • Always write out the linearized equation ln⁡[A(t)]=−kt+ln⁡(A0)\ln[A(t)] = -kt + \ln(A_0) explicitly so you can equate slope=−k\text{slope} = -k before solving for kk.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the linearized equation for exponential decay: ln⁡[A(t)]=ln⁡(A0)−kt\ln[A(t)] = \ln(A_0) - kt.

  2. Identify the slope of the line with respect to tt: slope=ddtln⁡[A(t)]=−k\text{slope} = \frac{d}{dt}\ln[A(t)] = -k.

  3. Equate the calculated slope to −k-k: −k=−0.0500 min−1  ⟹  k=0.0500 min−1-k = -0.0500\text{ min}^{-1} \implies k = 0.0500\text{ min}^{-1}.

Final answer

Model type: Exponential decay; Decay constant: k=0.0500 min−1k = 0.0500\text{ min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the linear equation Y=mt+cY = mt + c side-by-side with ln⁡(A)=−kt+ln⁡(A0)\ln(A) = -kt + \ln(A_0) to verify whether m=km = k or m=−km = -k.

  • Perform a physical sanity check: decay constants kk in decay formulations e−kte^{-kt} must be positive.

OverviewACEpath Teacher's Diagnosis

02 The student uses common logarithms (log₁₀) instead of natural logarithms (ln) when linearizing the data.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    log⁡10(1.000)=0  ⟹  log⁡10(0.6065)=−0.2172  ⟹  log⁡10(0.3679)=−0.4343  ⟹  log⁡10(0.2231)=−0.6515\log_{10}(1.000) = 0 \implies \log_{10}(0.6065) = -0.2172 \implies \log_{10}(0.3679) = -0.4343 \implies \log_{10}(0.2231) = -0.6515

    Correct

    ln⁡(1.000)=0.0000  ⟹  ln⁡(0.6065)≈−0.5000  ⟹  ln⁡(0.3679)≈−1.0000  ⟹  ln⁡(0.2231)≈−1.5000\ln(1.000) = 0.0000 \implies \ln(0.6065) \approx -0.5000 \implies \ln(0.3679) \approx -1.0000 \implies \ln(0.2231) \approx -1.5000

    The prompt asked for consecutive slopes of ln⁡[A(t)]\ln[A(t)]. Because the decay law is based on the natural exponential e−kte^{-kt}, you need the natural logarithm ln⁡\ln (base ee) so that ln⁡(e−kt)=−kt\ln(e^{-kt}) = -kt.

  2. Step 2

    Slope 1: −0.2172−010=−0.0217 min−1  ⟹  Slope 2: −0.4343−(−0.2172)10=−0.0217 min−1  ⟹  Slope 3: −0.6515−(−0.4343)10=−0.0217 min−1\text{Slope 1: } \frac{-0.2172 - 0}{10} = -0.0217\text{ min}^{-1} \implies \text{Slope 2: } \frac{-0.4343 - (-0.2172)}{10} = -0.0217\text{ min}^{-1} \implies \text{Slope 3: } \frac{-0.6515 - (-0.4343)}{10} = -0.0217\text{ min}^{-1}

    Correct

    Δln⁡(A)Δt=−0.5000−0.000010=−0.0500 min−1\frac{\Delta \ln(A)}{\Delta t} = \frac{-0.5000 - 0.0000}{10} = -0.0500\text{ min}^{-1} for all consecutive intervals

    Your slope calculation method was algebraically sound and consistent, but the numerical slopes were affected by using values from log⁡10\log_{10} rather than ln⁡\ln.

  3. Step 3

    "The slopes of log⁡(A)\log(A) are constant, so the correct model is exponential decay."

  4. Step 4

    k=−slope=0.0217 min−1k = -\text{slope} = 0.0217\text{ min}^{-1}

    Correct

    k=−slope=0.0500 min−1k = -\text{slope} = 0.0500\text{ min}^{-1}

    Because your slope was calculated using log⁡10\log_{10}, your slope equaled −klog⁡10(e)≈−0.4343k-k \log_{10}(e) \approx -0.4343k. Without dividing by log⁡10(e)\log_{10}(e) or using ln⁡\ln, the extracted decay constant was off by a factor of ln⁡(10)≈2.303\ln(10) \approx 2.303.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the slope between consecutive data points across all three intervals.

You recognized that a constant slope on a semi-log scale identifies an exponential decay model.

You correctly accounted for the negative sign convention when relating the slope to the decay constant kk.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Base Confusion: Log10 vs. Natural Log

You used the base-10 common logarithm (log⁡10\log_{10}) instead of the base-ee natural logarithm (ln⁡\ln) requested by the question.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing common logarithms with natural logarithms when linearizing continuous exponential models A(t)=A0e−ktA(t) = A_0 e^{-kt}. Taking ln⁡\ln yields ln⁡(A)=ln⁡(A0)−kt\ln(A) = \ln(A_0) - kt, where the slope directly equals −k-k. Taking log⁡10\log_{10} introduces an extra factor: log⁡10(A)=log⁡10(A0)−[klog⁡10(e)]t\log_{10}(A) = \log_{10}(A_0) - [k \log_{10}(e)]t.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match log base to exponential base
  • For natural exponential models y=y0erty = y_0 e^{rt}, always use natural log ln⁡\ln so that ln⁡(ert)=rt\ln(e^{rt}) = rt.

  • Check the base of the exponential term in the governing formula before picking your logarithm function.

Converting base-10 slopes to natural decay rate
  • If base-10 logs are used, slope=rlog⁡10(e)=rln⁡(10)\text{slope} = r \log_{10}(e) = \frac{r}{\ln(10)}, meaning r=slope×ln⁡(10)r = \text{slope} \times \ln(10).

  • Multiply base-10 slopes by ln⁡(10)≈2.3026\ln(10) \approx 2.3026 if you need the natural continuous rate kk.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the natural logarithm of absorbance values: ln⁡(1.000)=0.0000\ln(1.000) = 0.0000, ln⁡(0.6065)≈−0.5000\ln(0.6065) \approx -0.5000, ln⁡(0.3679)≈−1.0000\ln(0.3679) \approx -1.0000, and ln⁡(0.2231)≈−1.5000\ln(0.2231) \approx -1.5000.

  2. Calculate consecutive slopes: Δln⁡(A)Δt=−0.5000−0.000010−0=−0.0500 min−1\frac{\Delta \ln(A)}{\Delta t} = \frac{-0.5000 - 0.0000}{10 - 0} = -0.0500\text{ min}^{-1}.

  3. Equate the linearized slope ddtln⁡[A(t)]=−k\frac{d}{dt}\ln[A(t)] = -k to −0.0500 min−1-0.0500\text{ min}^{-1}, yielding k=0.0500 min−1k = 0.0500\text{ min}^{-1}.

Final answer

Model type: Exponential decay; Decay constant: k=0.0500 min−1k = 0.0500\text{ min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the property ln⁡(ex)=x\ln(e^x) = x versus log⁡10(ex)=xlog⁡10(e)\log_{10}(e^x) = x \log_{10}(e).

  • Practice converting rates when switching between semi-log base 10 and semi-log base ee.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the consecutive slopes using the original absorbance values ΔA/Δt rather than Δ(ln A)/Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Slope 1: 0.6065−1.00010=−0.03935 min−1  ⟹  Slope 2: 0.3679−0.606510=−0.02386 min−1  ⟹  Slope 3: 0.2231−0.367910=−0.01448 min−1\text{Slope 1: } \frac{0.6065 - 1.000}{10} = -0.03935\text{ min}^{-1} \implies \text{Slope 2: } \frac{0.3679 - 0.6065}{10} = -0.02386\text{ min}^{-1} \implies \text{Slope 3: } \frac{0.2231 - 0.3679}{10} = -0.01448\text{ min}^{-1}

    Correct

    Δln⁡(A)Δt=ln⁡(0.6065)−ln⁡(1.000)10−0=−0.5000−010=−0.0500 min−1\frac{\Delta \ln(A)}{\Delta t} = \frac{\ln(0.6065) - \ln(1.000)}{10 - 0} = \frac{-0.5000 - 0}{10} = -0.0500\text{ min}^{-1} (and likewise −0.0500 min−1-0.0500\text{ min}^{-1} across all consecutive intervals)

    You calculated the consecutive slopes ΔAΔt\frac{\Delta A}{\Delta t} on the original Cartesian data. The problem specifically asked you to evaluate the consecutive slopes of the transformed variable ln⁡[A(t)]\ln[A(t)] to verify the linearized exponential relationship.

  2. Step 2

    Because the slopes are not constant, it is not linear degradation, so the correct model is exponential decay.\text{Because the slopes are not constant, it is not linear degradation, so the correct model is exponential decay.}

    Correct

    Since Δln⁡(A)Δt=−0.0500 min−1 is constant across all intervals, the data fits an exponential decay model A(t)=A0e−kt.\text{Since } \frac{\Delta \ln(A)}{\Delta t} = -0.0500\text{ min}^{-1} \text{ is constant across all intervals, the data fits an exponential decay model } A(t) = A_0 e^{-kt}.

    Your observation that non-constant ΔAΔt\frac{\Delta A}{\Delta t} rules out linear degradation is valid. However, ruling out a linear model alone does not prove the model is exponential; you must confirm that the slope of ln⁡[A(t)]\ln[A(t)] with respect to tt is strictly constant.

  3. Step 3

    k=−slope 1=0.03935 min−1k = -\text{slope 1} = 0.03935\text{ min}^{-1}

    Correct

    k=−Δln⁡(A)Δt=−(−0.0500 min−1)=0.0500 min−1k = -\frac{\Delta \ln(A)}{\Delta t} = -(-0.0500\text{ min}^{-1}) = 0.0500\text{ min}^{-1}

    You set kk equal to the negative of the first Cartesian slope. In an exponential decay model A(t)=A0e−ktA(t) = A_0 e^{-kt}, linearizing gives ln⁡(A)=ln⁡(A0)−kt\ln(A) = \ln(A_0) - kt, meaning the decay constant kk is the negative slope of ln⁡(A)\ln(A) versus tt, not ΔA/Δt\Delta A / \Delta t.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly tested whether the rate of change of raw absorbance was constant across all intervals to evaluate the linear model.

You recognized that a decreasing slope magnitude indicates non-linear degradation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Semi-Log Slope Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You evaluated slopes using raw data values ΔA/Δt\Delta A / \Delta t rather than the linearized logarithmic values Δ[ln⁡(A)]/Δt\Delta [\ln(A)] / \Delta t, leading to an unverified model choice and equating the decay constant kk to a Cartesian slope.

REASONING PATH
Your ACEpath teacher’s suggested approach
Linearization of Exponential Models
  • For y=y0e−kty = y_0 e^{-kt}, taking natural logarithms yields ln⁡(y)=ln⁡(y0)−kt\ln(y) = \ln(y_0) - kt, which is linear in tt with constant slope m=−km = -k.

  • Always compute Yi=ln⁡(Ai)Y_i = \ln(A_i) first, then verify whether ΔYΔt\frac{\Delta Y}{\Delta t} is constant across all intervals.

Extracting the Rate Constant
  • In exponential decay, the constant decay rate kk satisfies k=−ddt[ln⁡A(t)]k = -\frac{d}{dt}[\ln A(t)].

  • Set k=−slope of semi-log linek = -\text{slope of semi-log line}, never the slope of the raw curve between two points.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Transform each absorbance measurement using natural logarithms: Y(0)=ln⁡(1.000)=0Y(0) = \ln(1.000) = 0, Y(10)=ln⁡(0.6065)≈−0.5000Y(10) = \ln(0.6065) \approx -0.5000, Y(20)=ln⁡(0.3679)≈−1.0000Y(20) = \ln(0.3679) \approx -1.0000, and Y(30)=ln⁡(0.2231)≈−1.5000Y(30) = \ln(0.2231) \approx -1.5000.

  2. Calculate the consecutive slopes of Y(t)Y(t): −0.5000−010=−0.0500 min−1\frac{-0.5000 - 0}{10} = -0.0500\text{ min}^{-1}, −1.0000−(−0.5000)10=−0.0500 min−1\frac{-1.0000 - (-0.5000)}{10} = -0.0500\text{ min}^{-1}, and −1.5000−(−1.0000)10=−0.0500 min−1\frac{-1.5000 - (-1.0000)}{10} = -0.0500\text{ min}^{-1}.

  3. Because Δln⁡(A)Δt\frac{\Delta \ln(A)}{\Delta t} is identical for all intervals, confirm the exponential decay model A(t)=A0e−ktA(t) = A_0 e^{-kt}.

  4. Equate the linearized semi-log slope to −k-k: −k=−0.0500 min−1  ⟹  k=0.0500 min−1-k = -0.0500\text{ min}^{-1} \implies k = 0.0500\text{ min}^{-1}.

Final answer

Model type: Exponential decay; Decay constant: k=0.0500 min−1k = 0.0500\text{ min}^{-1}; Model equation: A(t)=1.000e−0.0500tA(t) = 1.000 e^{-0.0500t}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice applying transformations like ln⁡(y)\ln(y) or log⁡(y)\log(y) to data tables before computing slopes when testing for exponential behavior.

  • Review how to match the slope and intercept of linearized equations (y=mx+by = mx + b) back to original model parameters (kk and A0A_0).

Lock it in

Similar question

01

A radioactive sample has measured activities of A(0)=800 BqA(0) = 800\text{ Bq} and A(20)=200 BqA(20) = 200\text{ Bq}, where tt is in hours. Assuming first-order decay A(t)=A0e−ktA(t) = A_0 e^{-kt}, calculate the linearized slope of ln⁡(A)\ln(A) versus tt and state the decay constant kk.

Answer

Slope: −0.0693 h−1-0.0693\text{ h}^{-1}; k=0.0693 h−1k = 0.0693\text{ h}^{-1}. Key steps: ln⁡(800)≈6.6846\ln(800) \approx 6.6846, ln⁡(200)≈5.2983\ln(200) \approx 5.2983. The slope is 5.2983−6.684620=−0.0693 h−1\frac{5.2983 - 6.6846}{20} = -0.0693\text{ h}^{-1}. Since slope=−k\text{slope} = -k, k=0.0693 h−1k = 0.0693\text{ h}^{-1}.

02

The concentration of a drug in the bloodstream at t=0,2,4 hourst = 0, 2, 4\text{ hours} is 12.0 mg/L12.0\text{ mg/L}, 7.2 mg/L7.2\text{ mg/L}, and 4.32 mg/L4.32\text{ mg/L}. Show that the drug follows exponential decay rather than linear clearance, and find the decay constant kk.

Answer

Exponential decay with k≈0.255 h−1k \approx 0.255\text{ h}^{-1}. Key steps: Linear slopes differ (−2.4 mg/(L⋅h)-2.4\text{ mg/(L}\cdot\text{h)} vs −1.44 mg/(L⋅h)-1.44\text{ mg/(L}\cdot\text{h)}). Transforming gives ln⁡(12.0)≈2.4849\ln(12.0) \approx 2.4849, ln⁡(7.2)≈1.9741\ln(7.2) \approx 1.9741, and ln⁡(4.32)≈1.4633\ln(4.32) \approx 1.4633. Consecutive slopes of ln⁡(C)\ln(C) are both ≈−0.2554 h−1\approx -0.2554\text{ h}^{-1}. Thus −k=−0.2554 h−1  ⟹  k≈0.255 h−1-k = -0.2554\text{ h}^{-1} \implies k \approx 0.255\text{ h}^{-1}.

03

A reactant decomposes following either zero-order kinetics ([R]=[R]0−kt[R] = [R]_0 - kt) or first-order kinetics ([R]=[R]0e−kt[R] = [R]_0 e^{-kt}). At t=0,5,10 st = 0, 5, 10\text{ s}, the concentrations are 2.00 M2.00\text{ M}, 1.20 M1.20\text{ M}, and 0.72 M0.72\text{ M}. Determine the correct reaction order and state the rate constant kk with correct units.

Answer

First-order kinetics with k≈0.102 s−1k \approx 0.102\text{ s}^{-1}. Key steps: Zero-order slopes are Δ[R]/Δt=−0.16 M/s\Delta[R]/\Delta t = -0.16\text{ M/s} and −0.096 M/s-0.096\text{ M/s} (not constant). First-order semi-log values: ln⁡(2.00)=0.693\ln(2.00) = 0.693, ln⁡(1.20)=0.182\ln(1.20) = 0.182, ln⁡(0.72)=−0.329\ln(0.72) = -0.329. Slopes of ln⁡[R]\ln[R] are both 0.182−0.6935=−0.102 s−1\frac{0.182 - 0.693}{5} = -0.102\text{ s}^{-1}. Therefore, the process is first-order, and k=−slope=0.102 s−1k = -\text{slope} = 0.102\text{ s}^{-1}.

Loading workspace…