Resources

An absolute-value inequality of the form ∣ax+b∣<c|ax + b| < c, where a>0a > 0 and c>0c > 0, has the solution set (−4,10)(-4, 10). If the coefficient of xx is fixed at a=1a = 1, find the values of the constants bb and cc, and write the resulting inequality.

Answer and steps

Final answer

b=−3b = -3, c=7c = 7; ∣x−3∣<7|x - 3| < 7

Steps

To determine the constants bb and cc, we can interpret the inequality either algebraically or geometrically.

Method 1: Geometric Interpretation (Midpoint and Distance)

The geometric definition of an absolute value expression ∣x−x0∣<r|x - x_0| < r represents all points on the real number line whose distance from a center point x0x_0 is strictly less than a radius r>0r > 0. This corresponds to an open interval (x0−r,x0+r)(x_0 - r, x_0 + r).

  1. Find the center (midpoint) x0x_0: The solution set is given as the interval (−4,10)(-4, 10). The midpoint of this interval is: x0=−4+102=62=3x_0 = \frac{-4 + 10}{2} = \frac{6}{2} = 3
  2. Find the radius (half-width) rr: The distance from the center to either endpoint is: r=10−(−4)2=142=7r = \frac{10 - (-4)}{2} = \frac{14}{2} = 7
  3. Match with the given form: Since a=1a = 1, the inequality is ∣x+b∣<c|x + b| < c, which can be rewritten as ∣x−(−b)∣<c|x - (-b)| < c. Comparing this to ∣x−x0∣<r|x - x_0| < r: −b=3  ⟹  b=−3-b = 3 \implies b = -3 c=r=7c = r = 7

Method 2: Algebraic Interpretation

  1. Expand the absolute-value inequality: For a=1a = 1 and c>0c > 0, the inequality ∣x+b∣<c|x + b| < c unfolds into a compound inequality: −c<x+b<c-c < x + b < c
  2. Isolate xx: Subtract bb from all parts: −c−b<x<c−b-c - b < x < c - b
  3. Set up a system of equations using the interval bounds: Since the solution set is (−4,10)(-4, 10), the lower and upper bounds must match: {−b−c=−4,−b+c=10\lbrace -b - c = -4, \quad -b + c = 10
  4. Solve for bb and cc:

    • Add the two equations together: (−b−c)+(−b+c)=−4+10  ⟹  −2b=6  ⟹  b=−3(-b - c) + (-b + c) = -4 + 10 \implies -2b = 6 \implies b = -3
    • Subtract the first equation from the second: (−b+c)−(−b−c)=10−(−4)  ⟹  2c=14  ⟹  c=7(-b + c) - (-b - c) = 10 - (-4) \implies 2c = 14 \implies c = 7

Resulting Inequality

Substituting b=−3b = -3 and c=7c = 7 into ∣x+b∣<c|x + b| < c yields: ∣x−3∣<7|x - 3| < 7

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sign of $b$ by equating $b$ directly to the midpoint of the interval instead of $-b$, resulting in $b = 3$ and $|x + 3| < 7$.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    |x + b| < c  means the center is at \text{ means the center is at } b  and distance is \text{ and distance is } c   ⟹  \implies Midpoint: \text{Midpoint: } −4+102\frac{-4 + 10}{2} = 62\frac{6}{2} = 3   ⟹  \implies b = 3

    Correct

    |x + b| < c   ⟺  \iff |x - (-b)| < c   ⟹  \implies center \text{center } x_0 = -b;   x_0 = −4+102\frac{-4 + 10}{2} = 3   ⟹  \implies -b = 3   ⟹  \implies b = -3

    You calculated the midpoint of the interval correctly as 33. However, distance on a number line is given by ∣x−x0∣|x - x_0|; rewriting ∣x+b∣|x + b| in distance form yields ∣x−(−b)∣|x - (-b)|, so the center is −b-b. Equating the center to 33 gives −b=3-b = 3, meaning b=−3b = -3.

  2. Step 2

    Radius: \text{Radius: } 10−(−4)2\frac{10 - (-4)}{2} = 142\frac{14}{2} = 7   ⟹  \implies c = 7

  3. Step 3

    The inequality is \text{The inequality is } |x + 3| < 7

    Correct

    The inequality is \text{The inequality is } |x - 3| < 7

    You substituted your value of b=3b = 3 into the inequality. Because bb should be −3-3, the correct inequality is ∣x−3∣<7|x - 3| < 7.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the geometric interpretation of absolute value to model the solution interval by its midpoint and radius.

You calculated the midpoint −4+102=3\frac{-4 + 10}{2} = 3 and the radius 10−(−4)2=7\frac{10 - (-4)}{2} = 7 with complete arithmetic accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in geometric center identification

You equated the parameter bb directly to the center 33 instead of writing ∣x+b∣|x + b| as ∣x−(−b)∣|x - (-b)| to identify the center as −b-b.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign of the translation parameter inside an absolute value: distance from a center x0x_0 is defined as ∣x−x0∣|x - x_0|, so an expression with addition, ∣x+b∣|x + b|, represents distance from −b-b, not +b+b.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distance Form Check
  • The distance between xx and a center x0x_0 on the number line is ∣x−x0∣|x - x_0|.

  • Always rewrite ∣x+b∣|x + b| explicitly as ∣x−(−b)∣|x - (-b)| before matching it with the center.

Endpoint Test
  • Plugging the interval endpoints into the resulting absolute-value equation must yield the boundary value cc.

  • Test x=10x = 10: ∣10−3∣=7|10 - 3| = 7 (valid), whereas ∣10+3∣=13≠7|10 + 3| = 13 \neq 7 immediately catches the sign error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rewrite the expression in standard distance form: ∣x+b∣=∣x−(−b)∣<c|x + b| = |x - (-b)| < c.

  2. Equate the center −b-b to the calculated midpoint 33: −b=3  ⟹  b=−3-b = 3 \implies b = -3.

  3. Combine with c=7c = 7 to write the final inequality: ∣x−3∣<7|x - 3| < 7.

Final answer

b = -3,   c = 7;   |x - 3| < 7

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting intervals (p,q)(p, q) into ∣x−x0∣<r|x - x_0| < r format by writing x0=p+q2x_0 = \frac{p+q}{2} and r=q−p2r = \frac{q-p}{2} first.

  • Always perform a quick endpoint check by substituting one endpoint into your final absolute-value expression to verify that it equals cc.

OverviewACEpath Teacher's Diagnosis

02 The student mistakes the total width of the interval for the radius $c$ without dividing by 2, leading to $c = 14$.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    -c < x + b < c  gives \text{ gives } -b - c < x < -b + c   ⟹  \implies -b - c = -4  and \text{ and } -b + c = 10

  2. Step 2

    -2b = 6,  so \text{ so } b = -3

  3. Step 3

    c = 10 - (-4) = 14

    Correct

    (-b + c) - (-b - c) = 10 - (-4)   ⟹  \implies 2c = 14   ⟹  \implies c = 7

    When subtracting the first equation from the second, the left-hand side is (−b+c)−(−b−c)=2c(-b + c) - (-b - c) = 2c, not cc. Setting c=14c = 14 takes the entire width of the interval rather than the half-width (radius).

  4. Step 4

    The inequality is \text{The inequality is } |x - 3| < 14

    Correct

    |x - 3| < 7

    Your inequality structure correctly substituted your calculated values of bb and cc, but the final answer was affected by the incorrect value of cc.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly translated the absolute-value inequality into a two-sided compound inequality.

You matched the boundary expressions to the interval endpoints to form a valid linear system.

You correctly eliminated cc by addition to determine b=−3b = -3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interval width confused with radius

You set c=10−(−4)c = 10 - (-4) directly, omitting the coefficient 22 from (−b+c)−(−b−c)=2c(-b + c) - (-b - c) = 2c.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You mistook the total length of the solution interval for the radius cc of the absolute value, forgetting that the absolute value ∣x−x0∣<c|x - x_0| < c measures the distance from the midpoint to either endpoint, which is half of the total width.

REASONING PATH
Your ACEpath teacher’s suggested approach
Algebraic Check: LHS subtraction
  • Subtracting (−b−c)(-b - c) from (−b+c)(-b + c) yields (−b+c)−(−b−c)=−b+c+b+c=2c(-b + c) - (-b - c) = -b + c + b + c = 2c.

  • Always write out the subtraction of the left-hand expressions explicitly to ensure coefficients are not dropped.

Geometric Check: Half-width vs. Total width
  • For an interval (x1,x2)(x_1, x_2), the absolute-value radius is c=x2−x12c = \frac{x_2 - x_1}{2}.

  • Check whether your value of cc represents the distance from the center to an endpoint rather than the span between both endpoints.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the lower bound equation from the upper bound equation: (−b+c)−(−b−c)=10−(−4)(-b + c) - (-b - c) = 10 - (-4).

  2. Simplify the left-hand side: −b+c+b+c=2c-b + c + b + c = 2c.

  3. Solve for cc: 2c=14  ⟹  c=72c = 14 \implies c = 7.

  4. Substitute b=−3b = -3 and c=7c = 7 into ∣x+b∣<c|x + b| < c to get ∣x−3∣<7|x - 3| < 7.

Final answer

b=−3b = -3, c=7c = 7; ∣x−3∣<7|x - 3| < 7

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice finding the midpoint x0=x1+x22x_0 = \frac{x_1 + x_2}{2} and radius r=x2−x12r = \frac{x_2 - x_1}{2} geometrically before writing the inequality.

  • When solving systems of equations by elimination, write the subtraction step with explicit parentheses around binomials to avoid dropping coefficients.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the endpoints of the interval directly as $-b$ and $c$, confusing the boundary values with the center and radius parameters.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Setting x+b=0x + b = 0 at the left gives b=4b = 4

    Correct

    −b=−4+102=3  ⟹  b=−3-b = \frac{-4 + 10}{2} = 3 \implies b = -3

    Setting x+b=0x + b = 0 locates the center (vertex) of the absolute-value expression, which must be the midpoint of the interval (−4,10)(-4, 10), not the left endpoint x=−4x = -4.

  2. Step 2

    Setting the upper bound directly gives c=10c = 10

    Correct

    c=10−(−4)2=7c = \frac{10 - (-4)}{2} = 7

    The value cc represents the distance from the center to either endpoint (the half-width or radius of the interval), not the upper endpoint itself.

  3. Step 3

    The inequality is ∣x+4∣<10|x + 4| < 10

    Correct

    ∣x−3∣<7|x - 3| < 7

    Because the values found for bb and cc were incorrect, the resulting inequality ∣x+4∣<10|x + 4| < 10 defines the interval (−14,6)(-14, 6) rather than (−4,10)(-4, 10).

WHAT YOU DID WELL
Compliments from Your Teacher

You identified that −4-4 and 1010 serve as the critical boundary values of the inequality.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Endpoint-Parameter Confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the boundary endpoints of a solution interval with the center and radius parameters of the absolute-value form ∣x−x0∣<r|x - x_0| < r.

REASONING PATH
Your ACEpath teacher’s suggested approach
Geometric Center
  • For an interval (x1,x2)(x_1, x_2), the center x0=−bx_0 = -b is the midpoint: x0=x1+x22x_0 = \frac{x_1 + x_2}{2}.

  • Always average the two endpoints to find the center before setting −b=x0-b = x_0.

Geometric Radius
  • For an interval (x1,x2)(x_1, x_2), the boundary distance cc is the half-length: c=x2−x12c = \frac{x_2 - x_1}{2}.

  • Calculate half the difference between the endpoints to find cc, rather than setting cc equal to the upper bound.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the midpoint of (−4,10)(-4, 10): x0=−4+102=3x_0 = \frac{-4 + 10}{2} = 3.

  2. Since ∣x+b∣=∣x−(−b)∣|x + b| = |x - (-b)|, equate −b=3-b = 3, giving b=−3b = -3.

  3. Find the half-width: c=10−(−4)2=7c = \frac{10 - (-4)}{2} = 7.

  4. Substitute bb and cc into the standard form to get ∣x−3∣<7|x - 3| < 7.

Final answer

b=−3b = -3, c=7c = 7; ∣x−3∣<7|x - 3| < 7

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric interpretation of absolute value as distance: ∣x−x0∣<r|x - x_0| < r means the distance between xx and x0x_0 is less than rr.

  • Practice reconstructing absolute-value inequalities from open intervals by computing the midpoint and half-width first.

Lock it in

Similar question

01

An absolute-value inequality of the form ∣x+b∣<c|x + b| < c with c>0c > 0 has the solution set (−9,1)(-9, 1). Find the values of bb and cc, and write the resulting inequality.

Answer

b=4b = 4, c=5c = 5; ∣x+4∣<5|x + 4| < 5. Midpoint −9+12=−4\frac{-9 + 1}{2} = -4, so center is −4-4. Thus −b=−4  ⟹  b=4-b = -4 \implies b = 4. Half-width c=1−(−9)2=5c = \frac{1 - (-9)}{2} = 5.

02

An inequality of the form ∣2x+b∣<c|2x + b| < c, where c>0c > 0, has the solution set (−1,5)(-1, 5). Find bb and cc, and state the inequality.

Answer

b=−4b = -4, c=6c = 6; ∣2x−4∣<6|2x - 4| < 6. Dividing by 22 gives ∣x+b2∣<c2|x + \frac{b}{2}| < \frac{c}{2}. Midpoint of (−1,5)(-1, 5) is 22, so −b2=2  ⟹  b=−4-\frac{b}{2} = 2 \implies b = -4. Half-width is 5−(−1)2=3\frac{5 - (-1)}{2} = 3, so c2=3  ⟹  c=6\frac{c}{2} = 3 \implies c = 6.

03

A tolerance specification states that a machine component's length xx must satisfy 49.2 mm<x<50.8 mm49.2\text{ mm} < x < 50.8\text{ mm}. Express this specification in the form ∣x+b∣<c|x + b| < c, finding the exact values of bb and cc.

Answer

b=−50b = -50, c=0.8c = 0.8; ∣x−50∣<0.8|x - 50| < 0.8. Center x0=49.2+50.82=50.0x_0 = \frac{49.2 + 50.8}{2} = 50.0, so −b=50  ⟹  b=−50-b = 50 \implies b = -50. Tolerance radius c=50.8−49.22=0.8c = \frac{50.8 - 49.2}{2} = 0.8.

Loading workspace…