Resources

A population of beneficial yeast cells in a controlled bioreactor is monitored over five consecutive hours. The population count P(t)P(t) (in thousands of cells) at hours t=0,1,2,3,4t = 0, 1, 2, 3, 4 is recorded as 12.012.0, 18.018.0, 27.027.0, 40.540.5, and 60.7560.75, respectively. Instead of solving for the future population size, determine the structural growth multiplier bb per unit time (the base of the model) that identifies this system as exponential, and calculate the exact continuous growth rate kk (in hr−1\text{hr}^{-1}) such that P(t)=P0ektP(t) = P_0 e^{kt}. Round kk to four significant digits.

Answer and steps

Final answer

Model type: Exponential; Base multiplier: b=1.5b = 1.5; Continuous growth rate: k=ln⁡(1.5)≈0.4055 hr−1k = \ln(1.5) \approx 0.4055\text{ hr}^{-1}

Steps

01

Test the Growth Structure

To select the appropriate model type, examine the ratio between consecutive population values at equal time intervals (Δt=1 hr\Delta t = 1\text{ hr}):

P(1)P(0)=18.012.0=1.5\frac{P(1)}{P(0)} = \frac{18.0}{12.0} = 1.5

P(2)P(1)=27.018.0=1.5\frac{P(2)}{P(1)} = \frac{27.0}{18.0} = 1.5

P(3)P(2)=40.527.0=1.5\frac{P(3)}{P(2)} = \frac{40.5}{27.0} = 1.5

P(4)P(3)=60.7540.5=1.5\frac{P(4)}{P(3)} = \frac{60.75}{40.5} = 1.5

Because the ratio of successive outputs for equal steps in the independent variable is constant (1.51.5), the data displays a constant relative growth factor rather than a constant difference. This geometric pattern confirms that the system is governed by an exponential model of discrete form: P(t)=P0⋅btP(t) = P_0 \cdot b^t where the base multiplier per unit time is: b=1.5b = 1.5


02

Relate the Discrete Multiplier to the Continuous Growth Rate

An exponential growth model can also be represented in continuous form with base ee: P(t)=P0ektP(t) = P_0 e^{kt}

Comparing the two forms gives: P0⋅bt=P0(ek)t  ⟹  b=ekP_0 \cdot b^t = P_0 (e^k)^t \implies b = e^k

To find the continuous growth rate kk, take the natural logarithm of both sides: k=ln⁡(b)=ln⁡(1.5)k = \ln(b) = \ln(1.5)

Evaluating to four significant digits: k≈0.4055 hr−1k \approx 0.4055\text{ hr}^{-1}

Common Pitfall: Do not confuse the discrete growth rate rr with the continuous growth rate kk. The discrete percentage increase per hour is r=b−1=0.50r = b - 1 = 0.50 (or 50%50\%), whereas the continuous growth rate is k=ln⁡(1+r)=ln⁡(1.5)≈0.4055k = \ln(1 + r) = \ln(1.5) \approx 0.4055, which is strictly less than rr due to compounding.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the discrete base b directly as the continuous rate k rather than taking the natural logarithm of b.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    b=18.012.0=1.5  ⟹  b=1.5b = \frac{18.0}{12.0} = 1.5 \implies b = 1.5

  2. Step 2

    P(t)=P0e(kt)  ⟹  k=b−1=0.5P(t) = P_0 e^{(kt)} \implies k = b - 1 = 0.5

    Correct

    P0bt=P0ekt  ⟹  b=ek  ⟹  k=ln⁡(b)=ln⁡(1.5)P_0 b^t = P_0 e^{kt} \implies b = e^k \implies k = \ln(b) = \ln(1.5)

    You set the continuous rate kk equal to the discrete relative growth rate r=b−1=0.5r = b - 1 = 0.5. In a continuous model P(t)=P0ektP(t) = P_0 e^{kt}, the base equals eke^k, which requires solving k=ln⁡(b)k = \ln(b).

  3. Step 3

    k=0.5000 hr−1k = 0.5000\text{ hr}^{-1}

    Correct

    k=ln⁡(1.5)≈0.4055 hr−1k = \ln(1.5) \approx 0.4055\text{ hr}^{-1}

    Because kk was calculated using b−1b - 1 rather than ln⁡(b)\ln(b), this final value is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that consecutive values have a constant ratio of 1.51.5.

You accurately stated the continuous exponential growth formula P(t)=P0ektP(t) = P_0 e^{kt}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Discrete vs. Continuous Rate Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the continuous rate kk as the discrete growth rate r=b−1r = b - 1, rather than converting the discrete base bb to the natural base using b=ek  ⟹  k=ln⁡(b)b = e^k \implies k = \ln(b).

REASONING PATH
Your ACEpath teacher’s suggested approach
Equate the Bases
  • For discrete P(t)=P0btP(t) = P_0 b^t and continuous P(t)=P0ektP(t) = P_0 e^{kt} to represent the exact same system, the bases must satisfy bt=(ek)tb^t = (e^k)^t, so b=ekb = e^k.

  • Always convert between the discrete factor bb and continuous rate kk using logarithms: k=ln⁡(b)k = \ln(b).

Distinguish $r$ from $k$
  • The discrete growth rate is r=b−1r = b - 1 (here 0.500.50 or 50%50\% per hour). Because continuous growth compounds every instant, the continuous rate is strictly smaller: k=ln⁡(1+r)<rk = \ln(1 + r) < r for positive growth.

  • Check that your continuous rate kk is ln⁡(1+r)\ln(1 + r) rather than rr.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the discrete and continuous expressions equal: P0bt=P0ekt  ⟹  b=ekP_0 b^t = P_0 e^{kt} \implies b = e^k.

  2. Substitute b=1.5b = 1.5: ek=1.5e^k = 1.5.

  3. Take the natural logarithm of both sides: k=ln⁡(1.5)k = \ln(1.5).

  4. Evaluate to four significant digits: k≈0.4055 hr−1k \approx 0.4055\text{ hr}^{-1}.

Final answer

Base multiplier: b=1.5b = 1.5; Continuous growth rate: k=ln⁡(1.5)≈0.4055 hr−1k = \ln(1.5) \approx 0.4055\text{ hr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between discrete growth rate r=b−1r = b - 1 and continuous growth rate k=ln⁡(b)k = \ln(b).

  • Practice converting models between the forms P(t)=P0(1+r)tP(t) = P_0(1+r)^t and P(t)=P0ektP(t) = P_0 e^{kt}.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the continuous growth rate using common logarithm (log₁₀) instead of natural logarithm (ln).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    b=18.012.0=1.5  ⟹  b=1.5b = \frac{18.0}{12.0} = 1.5 \implies b = 1.5

  2. Step 2

    ek=1.5e^k = 1.5

  3. Step 3

    k=log⁡(1.5)=0.1761k = \log(1.5) = 0.1761

    Correct

    k=ln⁡(1.5)≈0.4055k = \ln(1.5) \approx 0.4055

    To isolate kk from ek=1.5e^k = 1.5, you must use the natural logarithm ln⁡\ln (base ee) because ln⁡(ek)=k\ln(e^k) = k. Using log⁡10(1.5)\log_{10}(1.5) computes log⁡10(1.5)≈0.1761\log_{10}(1.5) \approx 0.1761, which does not undo base ee.

  4. Step 4

    k=0.1761 hr−1k = 0.1761\text{ hr}^{-1}

    Correct

    k≈0.4055 hr−1k \approx 0.4055\text{ hr}^{-1}

    This final value carries forward the error from using the base-10 logarithm instead of the natural logarithm.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the constant ratio between successive points to find the base multiplier b=1.5b = 1.5.

You correctly set up the structural conversion equation ek=1.5e^k = 1.5 relating discrete and continuous models.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm base mismatch

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the common logarithm (base 10) instead of the natural logarithm (base ee) to invert an exponential expression with base ee.

REASONING PATH
Your ACEpath teacher’s suggested approach
Matching Inverse Functions
  • The inverse of an exponential expression axa^x is the logarithm to the same base, log⁡a(x)\log_a(x). Specifically, ln⁡(ex)=x\ln(e^x) = x.

  • Whenever solving an equation where the unknown is in the exponent of ee, take the natural logarithm ln⁡\ln of both sides.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the natural logarithm (base ee) of both sides: ln⁡(ek)=ln⁡(1.5)\ln(e^k) = \ln(1.5)

  2. Simplify the left side using the inverse identity ln⁡(ek)=k\ln(e^k) = k: k=ln⁡(1.5)k = \ln(1.5)

  3. Evaluate to four significant digits: k≈0.4055 hr−1k \approx 0.4055\text{ hr}^{-1}

Final answer

b=1.5b = 1.5, k=ln⁡(1.5)≈0.4055 hr−1k = \ln(1.5) \approx 0.4055\text{ hr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between ln⁡(x)=log⁡e(x)\ln(x) = \log_e(x) and log⁡(x)=log⁡10(x)\log(x) = \log_{10}(x) on your calculator.

  • Practice converting exponential growth rates across different bases: b=ek  ⟺  k=ln⁡(b)b = e^k \iff k = \ln(b).

OverviewACEpath Teacher's Diagnosis

03 The student treats the population growth as linear by taking the first difference rather than the ratio between successive terms.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    b=18.0−12.0=6.0  ⟹  b=6.0b = 18.0 - 12.0 = 6.0 \implies b = 6.0

    Correct

    b=P(1)P(0)=18.012.0=1.5b = \frac{P(1)}{P(0)} = \frac{18.0}{12.0} = 1.5

    You calculated the difference between successive terms (18.0−12.018.0 - 12.0), which describes linear slope rather than exponential growth. For an exponential model P(t)=P0btP(t) = P_0 b^t, the base multiplier bb over Δt=1\Delta t = 1 is the ratio of consecutive outputs: b=P(t+1)P(t)=18.012.0=1.5b = \frac{P(t+1)}{P(t)} = \frac{18.0}{12.0} = 1.5.

  2. Step 2

    ek=6.0  ⟹  k=ln⁡(6.0)=1.792  ⟹  k=1.792 hr−1e^k = 6.0 \implies k = \ln(6.0) = 1.792 \implies k = 1.792\text{ hr}^{-1}

    Correct

    ek=1.5  ⟹  k=ln⁡(1.5)≈0.4055 hr−1e^k = 1.5 \implies k = \ln(1.5) \approx 0.4055\text{ hr}^{-1}

    Your algebraic method of solving ek=be^k = b with k=ln⁡(b)k = \ln(b) was mathematically sound, but your result was affected by the incorrect value of b=6.0b = 6.0 from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the continuous growth rate kk relates to the discrete base multiplier by ek=be^k = b.

You correctly solved for kk using the natural logarithm and rounded your final value to four significant digits.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Additive vs. Multiplicative Change

You subtracted consecutive population terms instead of dividing them to find the growth factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing linear change (constant differences: Δy=yn+1−yn\Delta y = y_{n+1} - y_n) with exponential growth (constant multipliers/ratios: b=yn+1ynb = \frac{y_{n+1}}{y_n}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Growth Mechanism
  • Linear models have equal additions over equal time intervals (yt+1−yt=my_{t+1} - y_t = m), whereas exponential models have equal multiplicative factors (yt+1/yt=by_{t+1} / y_t = b).

  • Whenever testing or constructing an exponential model, always calculate the quotient P(t+1)P(t)\frac{P(t+1)}{P(t)} rather than the difference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the structural base multiplier using the ratio of successive population values: b=P(1)P(0)=18.012.0=1.5b = \frac{P(1)}{P(0)} = \frac{18.0}{12.0} = 1.5.

  2. Verify the constant ratio across remaining steps: 27.018.0=1.5\frac{27.0}{18.0} = 1.5, 40.527.0=1.5\frac{40.5}{27.0} = 1.5, and 60.7540.5=1.5\frac{60.75}{40.5} = 1.5, confirming an exponential model.

  3. Equate the discrete and continuous bases: ek=b=1.5e^k = b = 1.5.

  4. Solve for the continuous rate kk: k=ln⁡(1.5)≈0.405465… hr−1k = \ln(1.5) \approx 0.405465\dots\text{ hr}^{-1}.

  5. Round to four significant digits: k≈0.4055 hr−1k \approx 0.4055\text{ hr}^{-1}.

Final answer

Model type: Exponential; Base multiplier: b=1.5b = 1.5; Continuous growth rate: k≈0.4055 hr−1k \approx 0.4055\text{ hr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice classifying datasets as linear or exponential by testing both first differences and successive ratios.

  • Remember that the word 'multiplier' or 'factor' signals division and multiplication, not subtraction.

Lock it in

Similar question

01

A culture of algae doubles every 1 day1\text{ day}. Find the discrete base multiplier bb per day and the continuous daily growth rate kk to four significant digits.

Answer

Since the population doubles each day, the discrete base multiplier is b=2b = 2. The continuous rate satisfies ek=b=2e^k = b = 2, so k=ln⁡(2)≈0.6931 day−1k = \ln(2) \approx 0.6931\text{ day}^{-1}.

02

An enzyme concentration decreases according to the hourly measurements: t=0 hr→80.0 mg/Lt=0\text{ hr} \to 80.0\text{ mg/L}, t=1 hr→60.0 mg/Lt=1\text{ hr} \to 60.0\text{ mg/L}, t=2 hr→45.0 mg/Lt=2\text{ hr} \to 45.0\text{ mg/L}. Determine the discrete base multiplier bb and the continuous decay rate kk such that C(t)=C0ektC(t) = C_0 e^{kt}. Round kk to four significant digits.

Answer

The consecutive ratio is b=60.080.0=0.75b = \frac{60.0}{80.0} = 0.75. The continuous decay rate is k=ln⁡(b)=ln⁡(0.75)≈−0.2877 hr−1k = \ln(b) = \ln(0.75) \approx -0.2877\text{ hr}^{-1}.

03

A cell population grows continuously at a continuous rate of k=0.35 hr−1k = 0.35\text{ hr}^{-1}. What is the effective discrete hourly multiplier bb, and what is the discrete percentage increase per hour? Round bb to four significant digits and the percentage to two decimal places.

Answer

Using the relation b=ekb = e^k, we have b=e0.35≈1.419b = e^{0.35} \approx 1.419. The discrete percentage growth rate is r=b−1=1.419−1=0.419=41.90%r = b - 1 = 1.419 - 1 = 0.419 = 41.90\% per hour.

Loading workspace…