Resources

An introductory ecology student observes that the measured predator population counts yy at prey densities x=10,20,30,40x = 10, 20, 30, 40 are 100,400,900,1600100, 400, 900, 1600. The student reasons that because the consecutive differences Δy\Delta y (300,500,700300, 500, 700) are increasing rapidly, the population must be growing exponentially (y=abxy = a b^x). Disprove this common intuition by computing both the ratios of consecutive terms yk+1yk\frac{y_{k+1}}{y_k} and the ratios of log-transformed coordinates Δ(ln⁡y)Δ(ln⁡x)\frac{\Delta(\ln y)}{\Delta(\ln x)}. State the correct structural model family (polynomial power function vs. exponential) and provide its explicit functional equation.

Answer and steps

Final answer

Model type: Quadratic power function (Polynomial), not Exponential; Justification: Ratios of consecutive terms yk+1yk\frac{y_{k+1}}{y_k} are 4.00,2.25,1.784.00, 2.25, 1.78 (non-constant, ruling out exponential growth), while Δ(ln⁡y)Δ(ln⁡x)=2.0\frac{\Delta(\ln y)}{\Delta(\ln x)} = 2.0 (constant log-log slope); Governing equation: y(x)=x2y(x) = x^2

Steps

01

Test for Exponential Growth: Consecutive Ratios

For an exponential function of the form y=abxy = a b^x, equal steps in xx (Δx=10\Delta x = 10) must produce equal multiplicative factors in yy:

yk+1yk=abxk+Δxabxk=bΔx=constant\frac{y_{k+1}}{y_k} = \frac{a b^{x_k + \Delta x}}{a b^{x_k}} = b^{\Delta x} = \text{constant}

Let us compute the consecutive ratios for the given data points (10,100)(10, 100), (20,400)(20, 400), (30,900)(30, 900), and (40,1600)(40, 1600):

  • From x=10x = 10 to x=20x = 20: y2y1=400100=4.00\frac{y_2}{y_1} = \frac{400}{100} = 4.00
  • From x=20x = 20 to x=30x = 30: y3y2=900400=2.25\frac{y_3}{y_2} = \frac{900}{400} = 2.25
  • From x=30x = 30 to x=40x = 40: y4y3=1600900≈1.78\frac{y_4}{y_3} = \frac{1600}{900} \approx 1.78

Because these ratios are strictly decreasing (4.00→2.25→1.784.00 \to 2.25 \to 1.78) rather than constant, the relationship cannot be exponential.

Common Pitfall: A sequence with increasing first differences (Δy=300,500,700\Delta y = 300, 500, 700) merely indicates that the function is concave up (accelerating). Any polynomial of degree n≥2n \ge 2 also has increasing first differences; accelerating growth alone does not imply exponential growth.


02

Test for a Power Law: Log-Log Slope

A general power function has the form y=cxpy = c x^p. Taking the natural logarithm of both sides gives a linear relationship:

ln⁡y=ln⁡c+pln⁡x\ln y = \ln c + p \ln x

The slope of this line on log-transformed axes represents the power pp:

Slope=Δ(ln⁡y)Δ(ln⁡x)=ln⁡(yk+1)−ln⁡(yk)ln⁡(xk+1)−ln⁡(xk)=ln⁡(yk+1/yk)ln⁡(xk+1/xk)\text{Slope} = \frac{\Delta(\ln y)}{\Delta(\ln x)} = \frac{\ln(y_{k+1}) - \ln(y_k)}{\ln(x_{k+1}) - \ln(x_k)} = \frac{\ln(y_{k+1}/y_k)}{\ln(x_{k+1}/x_k)}

Evaluating across each consecutive interval:

  • Between (10,100)(10, 100) and (20,400)(20, 400): ln⁡(400/100)ln⁡(20/10)=ln⁡(4)ln⁡(2)=2ln⁡(2)ln⁡(2)=2.0\frac{\ln(400/100)}{\ln(20/10)} = \frac{\ln(4)}{\ln(2)} = \frac{2\ln(2)}{\ln(2)} = 2.0
  • Between (20,400)(20, 400) and (30,900)(30, 900): ln⁡(900/400)ln⁡(30/20)=ln⁡(9/4)ln⁡(3/2)=ln⁡((3/2)2)ln⁡(3/2)=2ln⁡(3/2)ln⁡(3/2)=2.0\frac{\ln(900/400)}{\ln(30/20)} = \frac{\ln(9/4)}{\ln(3/2)} = \frac{\ln((3/2)^2)}{\ln(3/2)} = \frac{2\ln(3/2)}{\ln(3/2)} = 2.0
  • Between (30,900)(30, 900) and (40,1600)(40, 1600): ln⁡(1600/900)ln⁡(40/30)=ln⁡(16/9)ln⁡(4/3)=ln⁡((4/3)2)ln⁡(4/3)=2ln⁡(4/3)ln⁡(4/3)=2.0\frac{\ln(1600/900)}{\ln(40/30)} = \frac{\ln(16/9)}{\ln(4/3)} = \frac{\ln((4/3)^2)}{\ln(4/3)} = \frac{2\ln(4/3)}{\ln(4/3)} = 2.0

Because Δ(ln⁡y)Δ(ln⁡x)=2.0\frac{\Delta(\ln y)}{\Delta(\ln x)} = 2.0 is constant across all intervals, the data precisely follows a power function with exponent p=2p = 2.


03

Model Identification and Explicit Equation

Since p=2p = 2, the model belongs to the quadratic power function (polynomial) family:

y=cx2y = c x^2

Substitute the point (10,100)(10, 100) to find the coefficient cc:

100=c(102)  ⟹  100=100c  ⟹  c=1100 = c(10^2) \implies 100 = 100c \implies c = 1

The explicit functional equation is:

y(x)=x2y(x) = x^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the variable consecutive ratios y_(k+1)/y_k as evidence of exponential growth with an increasing growth rate rather than disproving the exponential model.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y2y1=400100=4  ⟹  y3y2=900400=2.25  ⟹  y4y3=1600900=1.78\frac{y_2}{y_1} = \frac{400}{100} = 4 \implies \frac{y_3}{y_2} = \frac{900}{400} = 2.25 \implies \frac{y_4}{y_3} = \frac{1600}{900} = 1.78

  2. Step 2

    "The ratios are all greater than 1, so the model is exponential with an accelerating base."

    Correct

    Because the ratios decrease (4.00,2.25,1.784.00, 2.25, 1.78) rather than remaining constant, the exponential model is ruled out.

    In an exponential function y=abxy = a b^x with equal spacing Δx\Delta x, the consecutive ratio yk+1yk=bΔx\frac{y_{k+1}}{y_k} = b^{\Delta x} must be strictly constant. Ratios simply being greater than 11 only means the function is increasing; varying ratios explicitly disprove an exponential relationship.

  3. Step 3

    ln⁡400−ln⁡100ln⁡20−ln⁡10=ln⁡(4)ln⁡(2)=2  ⟹  ln⁡900−ln⁡400ln⁡30−ln⁡20=ln⁡(2.25)ln⁡(1.5)=2  ⟹  ln⁡1600−ln⁡900ln⁡40−ln⁡30=ln⁡(1.78)ln⁡(1.33)=2  ⟹  Δ(ln⁡y)Δ(ln⁡x)=2\frac{\ln 400 - \ln 100}{\ln 20 - \ln 10} = \frac{\ln(4)}{\ln(2)} = 2 \implies \frac{\ln 900 - \ln 400}{\ln 30 - \ln 20} = \frac{\ln(2.25)}{\ln(1.5)} = 2 \implies \frac{\ln 1600 - \ln 900}{\ln 40 - \ln 30} = \frac{\ln(1.78)}{\ln(1.33)} = 2 \implies \frac{\Delta(\ln y)}{\Delta(\ln x)} = 2

  4. Step 4

    "Model family: exponential"   ⟹  \implies "Equation: y=100(1.4)xy = 100(1.4)^x"

    Correct

    Model family: Quadratic power function (Polynomial)   ⟹  \implies Governing equation: y=x2y = x^2

    A constant log-log slope Δ(ln⁡y)Δ(ln⁡x)=p\frac{\Delta(\ln y)}{\Delta(\ln x)} = p defines a power law y=cxpy = c x^p, not an exponential function. Since p=2p = 2, substituting (10,100)(10, 100) gives 100=c(102)  ⟹  c=1100 = c(10^2) \implies c = 1, yielding y=x2y = x^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the numerical values of the consecutive term ratios.

You applied the log transformation formula accurately across all three intervals to obtain a constant slope of 2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Model Identification Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an increasing sequence with ratios greater than 1 as an exponential relationship with a changing base, overlooking the fundamental definition that an exponential function requires a strictly constant multiplicative factor over equal step sizes, while a constant log-log slope defines a power law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant step ratio test
  • For equal increments Δx\Delta x, an exponential model y=abxy = a b^x requires yk+1yk=bΔx=constant\frac{y_{k+1}}{y_k} = b^{\Delta x} = \text{constant}.

  • Check if consecutive ratios are identical; if they change, immediately rule out the exponential family.

Log-log slope test
  • A constant slope on log-log axes, Δ(ln⁡y)Δ(ln⁡x)=p\frac{\Delta(\ln y)}{\Delta(\ln x)} = p, identifies a power function y=cxpy = c x^p where pp is the power/exponent.

  • When Δ(ln⁡y)Δ(ln⁡x)\frac{\Delta(\ln y)}{\Delta(\ln x)} is constant, set up y=cxpy = c x^p and solve for the leading coefficient cc using any given data point.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Because Δ(ln⁡y)Δ(ln⁡x)=2\frac{\Delta(\ln y)}{\Delta(\ln x)} = 2 is invariant, the data belongs to the power-law family y=cx2y = c x^2.

  2. Substitute the first point (x,y)=(10,100)(x, y) = (10, 100) into y=cx2y = c x^2: 100=c(102)=100c100 = c(10^2) = 100c.

  3. Solve for cc: c=1c = 1.

Final answer

Model family: Quadratic power function (Polynomial); Governing equation: y(x)=x2y(x) = x^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the structural criteria that separate exponential growth (y=abxy = ab^x) from power-law growth (y=cxpy = cx^p).

  • Practice distinguishing semi-log linearity (exponential) from log-log linearity (power function).

  • Complete the practice exercises below to reinforce fitting power models from log-log slopes.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the log-log transformation Δ(ln y)/Δ(ln x) with a semi-log transformation Δ(ln y)/Δx, erroneously expecting Δ(ln y)/Δx to be constant for a power function.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    y2y1=400100=4  ⟹  y3y2=900400=2.25  ⟹  y4y3=1600900=1.78  ⟹  \frac{y_2}{y_1} = \frac{400}{100} = 4 \implies \frac{y_3}{y_2} = \frac{900}{400} = 2.25 \implies \frac{y_4}{y_3} = \frac{1600}{900} = 1.78 \implies The consecutive ratios are not constant, so growth is not exponential.

  2. Step 2

    Δ(ln⁡y)Δx=ln⁡400−ln⁡10020−10=1.38610=0.1386  ⟹  Δ(ln⁡y)Δx=ln⁡900−ln⁡40030−20=0.81110=0.0811\frac{\Delta(\ln y)}{\Delta x} = \frac{\ln 400 - \ln 100}{20 - 10} = \frac{1.386}{10} = 0.1386 \implies \frac{\Delta(\ln y)}{\Delta x} = \frac{\ln 900 - \ln 400}{30 - 20} = \frac{0.811}{10} = 0.0811

    Correct

    Δ(ln⁡y)Δ(ln⁡x)=ln⁡(yk+1)−ln⁡(yk)ln⁡(xk+1)−ln⁡(xk)=ln⁡(400/100)ln⁡(20/10)=ln⁡4ln⁡2=2.0\frac{\Delta(\ln y)}{\Delta(\ln x)} = \frac{\ln(y_{k+1}) - \ln(y_k)}{\ln(x_{k+1}) - \ln(x_k)} = \frac{\ln(400/100)}{\ln(20/10)} = \frac{\ln 4}{\ln 2} = 2.0

    You divided by the linear difference Δx\Delta x rather than the logarithmic difference Δ(ln⁡x)\Delta(\ln x). A power law y=cxpy = c x^p linearizes under a log-log transformation, ln⁡y=ln⁡c+pln⁡x\ln y = \ln c + p \ln x, which requires taking the logarithm of both variables.

  3. Step 3

    Model family: polynomial power function   ⟹  \implies Equation: y=x2y = x^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the consecutive ratios to eliminate the exponential model.

You arrived at the correct governing equation y=x2y = x^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Semi-log vs. Log-log Transformation Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused a semi-log linearization with a log-log linearization by taking the logarithm of only the dependent variable yy instead of both xx and yy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponential Model Transformation (Semi-log)
  • For y=abxy = a b^x, taking the natural logarithm yields ln⁡y=ln⁡a+(ln⁡b)x\ln y = \ln a + (\ln b)x.

  • Use semi-log coordinates (Δ(ln⁡y)/Δx)(\Delta(\ln y) / \Delta x) only when testing whether equal additive increments in xx yield constant multiplicative factors in yy.

Power Function Transformation (Log-log)
  • For y=cxpy = c x^p, taking the natural logarithm yields ln⁡y=ln⁡c+pln⁡x\ln y = \ln c + p \ln x.

  • Transform both variables logarithmically to obtain a constant slope equal to the power: Δ(ln⁡y)Δ(ln⁡x)=p\frac{\Delta(\ln y)}{\Delta(\ln x)} = p.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the log-log slope for the first interval (10,100)(10, 100) to (20,400)(20, 400): Δ(ln⁡y)Δ(ln⁡x)=ln⁡(400/100)ln⁡(20/10)=ln⁡4ln⁡2=2.0\frac{\Delta(\ln y)}{\Delta(\ln x)} = \frac{\ln(400/100)}{\ln(20/10)} = \frac{\ln 4}{\ln 2} = 2.0.

  2. Check the second interval (20,400)(20, 400) to (30,900)(30, 900): ln⁡(900/400)ln⁡(30/20)=ln⁡(9/4)ln⁡(3/2)=2ln⁡(3/2)ln⁡(3/2)=2.0\frac{\ln(900/400)}{\ln(30/20)} = \frac{\ln(9/4)}{\ln(3/2)} = \frac{2\ln(3/2)}{\ln(3/2)} = 2.0.

  3. Because Δ(ln⁡y)Δ(ln⁡x)=2.0\frac{\Delta(\ln y)}{\Delta(\ln x)} = 2.0 is constant across all intervals, conclude that the exponent is p=2p = 2, confirming a quadratic power function y=cx2y = c x^2.

Final answer

Model family: Quadratic power function (Polynomial); Governing equation: y(x)=x2y(x) = x^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how taking logarithms of y=cxpy = c x^p requires transforming both axes: ln⁡y=ln⁡c+pln⁡x\ln y = \ln c + p \ln x.

  • Practice computing Δ(ln⁡y)Δ(ln⁡x)\frac{\Delta(\ln y)}{\Delta(\ln x)} by writing it as ln⁡(y2/y1)ln⁡(x2/x1)\frac{\ln(y_2/y_1)}{\ln(x_2/x_1)} before substituting numbers.

Lock it in

Similar question

01

Data points are collected: (2,12)(2, 12), (4,48)(4, 48), (6,192)(6, 192). Determine whether the data follows an exponential model or a power model by checking consecutive ratios yk+1yk\frac{y_{k+1}}{y_k}, then state the governing equation.

Answer

Exponential model; y(x)=3⋅2xy(x) = 3 \cdot 2^x. Key steps: Consecutive ratios are 4812=4\frac{48}{12} = 4 and 19248=4\frac{192}{48} = 4. Since the ratio is constant for equal step size Δx=2\Delta x = 2, the model is exponential: b2=4  ⟹  b=2b^2 = 4 \implies b = 2. Using (2,12)(2, 12): 12=a(22)  ⟹  a=312 = a(2^2) \implies a = 3.

02

A dataset contains points (2,24)(2, 24), (4,192)(4, 192), (6,648)(6, 648). Compute the consecutive ratios yk+1yk\frac{y_{k+1}}{y_k} and the log-log slopes Δ(ln⁡y)Δ(ln⁡x)\frac{\Delta(\ln y)}{\Delta(\ln x)} to identify the model family and find its equation.

Answer

Cubic power function (Polynomial); y(x)=3x3y(x) = 3 x^3. Key steps: Consecutive ratios are 19224=8\frac{192}{24} = 8 and 648192=3.375\frac{648}{192} = 3.375 (non-constant, so not exponential). Log-log slopes are ln⁡(192/24)ln⁡(4/2)=ln⁡8ln⁡2=3\frac{\ln(192/24)}{\ln(4/2)} = \frac{\ln 8}{\ln 2} = 3 and ln⁡(648/192)ln⁡(6/4)=ln⁡(27/8)ln⁡(3/2)=3\frac{\ln(648/192)}{\ln(6/4)} = \frac{\ln(27/8)}{\ln(3/2)} = 3. Constant slope p=3p = 3 implies y=cx3y = c x^3. Using (2,24)(2, 24): 24=c(23)  ⟹  c=324 = c(2^3) \implies c = 3.

03

An ecologist measures biomass MM against radius RR: (R,M)=(10,50)(R, M) = (10, 50), (20,400)(20, 400), (40,3200)(40, 3200). Identify whether this growth is exponential or power-law, determine the exponent/base, and write the explicit equation M(R)M(R).

Answer

Cubic power function; M(R)=0.05R3M(R) = 0.05 R^3. Key steps: Note that RR doubles each step. The ratio of MM values is 40050=8\frac{400}{50} = 8 and 3200400=8\frac{3200}{400} = 8. When xx multiplies by 22, yy multiplies by 8=238 = 2^3. On log-log coordinates, the slope is ln⁡8ln⁡2=3\frac{\ln 8}{\ln 2} = 3. Hence, M=cR3M = c R^3. Using (10,50)(10, 50): 50=c(103)=1000c  ⟹  c=0.0550 = c(10^3) = 1000c \implies c = 0.05.

Loading workspace…