Resources

Federal environmental standards establish that arsenic levels in municipal drinking water must not exceed 10 parts per billion (ppb)10\text{ parts per billion (ppb)}. An analytical chemistry laboratory samples water from a community well and records arsenic concentrations in units of milligrams per liter (mg/L\text{mg/L}). Recall that 1 ppb=1 μg/L=0.001 mg/L1\text{ ppb} = 1\text{ }\mu\text{g/L} = 0.001\text{ mg/L}. The community action group suspects that the well's mean arsenic concentration violates the regulatory threshold. (a) Convert the 10 ppb10\text{ ppb} threshold into equivalent units of mg/L\text{mg/L}. (b) State the null and alternative hypotheses using the population parameter μ\mu in units of mg/L\text{mg/L}. (c) State the null and alternative hypotheses using the population parameter μ\mu in units of ppb\text{ppb}.

Answer and steps

Final answer

(a) 10 ppb=10×0.001 mg/L=0.010 mg/L10\text{ ppb} = 10 \times 0.001\text{ mg/L} = 0.010\text{ mg/L}. (b) In mg/L\text{mg/L}: H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L} (or μ≤0.010 mg/L\mu \le 0.010\text{ mg/L}) versus Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}, where μ\mu is the true mean arsenic concentration. (c) In ppb\text{ppb}: H0:μ=10 ppbH_0: \mu = 10\text{ ppb} (or μ≤10 ppb\mu \le 10\text{ ppb}) versus Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}.

Steps

Part (a): Unit Conversion

We are given the conversion factor: 1 ppb=0.001 mg/L1\text{ ppb} = 0.001\text{ mg/L}

To convert the regulatory threshold of 10 ppb10\text{ ppb} into milligrams per liter (mg/L\text{mg/L}), multiply by this conversion factor: 10 ppb=10⋅0.001 mg/L=0.010 mg/L10\text{ ppb} = 10 \cdot 0.001\text{ mg/L} = 0.010\text{ mg/L}


Part (b): Hypotheses in Units of mg/L\text{mg/L}

Let μ\mu represent the true population mean arsenic concentration in the community well water.

  1. Identify the claim/suspicion: The community suspects that the water violates the standard by exceeding the allowable limit of 0.010 mg/L0.010\text{ mg/L}. In hypothesis testing, the research suspicion or claim that requires evidence to support is placed in the alternative hypothesis (HaH_a or H1H_1): Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}
  2. Establish the null hypothesis: The null hypothesis (H0H_0) represents the baseline condition or status quo that the water meets federal standards (it does not exceed the limit). It always includes the equality condition: H0:μ=0.010 mg/L(or H0:μ≤0.010 mg/L)H_0: \mu = 0.010\text{ mg/L} \quad (\text{or } H_0: \mu \le 0.010\text{ mg/L})

Common Pitfall: Never formulate hypotheses using the sample mean (xˉ\bar{x}). Hypotheses always make statements about the unknown population parameter (μ\mu). Additionally, because a violation corresponds specifically to levels higher than the legal limit, this test is strictly one-tailed (right-tailed, >>), not two-tailed (≠\ne).


Part (c): Hypotheses in Units of ppb\text{ppb}

Using the original measurement scale of parts per billion (ppb\text{ppb}), the threshold value is 10 ppb10\text{ ppb}.

Defining μ\mu as the true mean arsenic concentration in ppb\text{ppb}:

  • Null Hypothesis (H0H_0): The well complies with federal regulations. H0:μ=10 ppb(or H0:μ≤10 ppb)H_0: \mu = 10\text{ ppb} \quad (\text{or } H_0: \mu \le 10\text{ ppb})
  • Alternative Hypothesis (HaH_a): The well violates federal regulations. Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student performs a two-tailed test instead of a one-tailed test because they confuse testing for a violation of an upper bound with testing for any difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    10×0.001=0.01 mg/L10 \times 0.001 = 0.01\text{ mg/L}

  2. Step 2

    H0:μ=0.01 mg/L  ⟹  Ha:μ≠0.01 mg/LH_0: \mu = 0.01\text{ mg/L} \implies H_a: \mu \ne 0.01\text{ mg/L}

    Correct

    H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L} (or μ≤0.010 mg/L\mu \le 0.010\text{ mg/L}) versus Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}

    The community suspects that the water violates the standard, which specifies that arsenic levels must not exceed 0.010 mg/L0.010\text{ mg/L}. A violation only occurs if the mean concentration is strictly greater than the threshold (μ>0.010 mg/L\mu > 0.010\text{ mg/L}), making this a right-tailed test rather than a two-tailed test.

  3. Step 3

    H0:μ=10 ppb  ⟹  Ha:μ≠10 ppbH_0: \mu = 10\text{ ppb} \implies H_a: \mu \ne 10\text{ ppb}

    Correct

    H0:μ=10 ppbH_0: \mu = 10\text{ ppb} (or μ≤10 ppb\mu \le 10\text{ ppb}) versus Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

    Just as in part (b), a regulatory violation of a maximum limit means exceeding 10 ppb10\text{ ppb}, so the alternative hypothesis must be directional: Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted parts per billion to milligrams per liter using the given scale factor.

You correctly used the population parameter μ\mu rather than a sample statistic like xˉ\bar{x}.

You correctly placed the equality condition in the null hypothesis for both units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Two-tailed instead of one-tailed alternative hypothesis

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated testing for a regulatory threshold violation as testing for 'any difference' from the standard, overlooking that 'does not exceed' defines an upper bound where only values strictly greater than the limit represent a violation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Translate Context into Inequality Direction
  • When a context specifies an upper safety threshold or ceiling ('must not exceed', 'at most', 'maximum allowable'), a violation or cause for concern is strictly greater than that value (>>).

  • Always re-read the research suspicion: if evidence is sought specifically for exceeding a limit, set HaH_a with >> (right-tailed). Reserve ≠\ne for situations where values either too high or too low are equally concerning or unspecified.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the research claim: The standard states arsenic 'must not exceed' 10 ppb10\text{ ppb} (0.010 mg/L0.010\text{ mg/L}), so a violation corresponds to μ>0.010 mg/L\mu > 0.010\text{ mg/L}.

  2. Write the hypotheses in mg/L\text{mg/L}: H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L} (or μ≤0.010 mg/L\mu \le 0.010\text{ mg/L}) versus Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}.

  3. Write the hypotheses in ppb\text{ppb}: H0:μ=10 ppbH_0: \mu = 10\text{ ppb} (or μ≤10 ppb\mu \le 10\text{ ppb}) versus Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}.

Final answer

(a) 0.010 mg/L0.010\text{ mg/L}; (b) H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L} vs. Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}; (c) H0:μ=10 ppbH_0: \mu = 10\text{ ppb} vs. Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review keywords that indicate directional claims (e.g., 'exceeds', 'greater than', 'at least', 'reduced') versus non-directional claims (e.g., 'differs', 'has changed').

  • Practice identifying whether a test is left-tailed, right-tailed, or two-tailed before writing down the hypotheses.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the direction of the inequality in the alternative hypothesis, testing whether the mean concentration is below the threshold instead of exceeding it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    10×0.001=0.01 mg/L10 \times 0.001 = 0.01\text{ mg/L}

  2. Step 2

    H0:μ≥0.01 mg/L  ⟹  Ha:μ<0.01 mg/LH_0: \mu \ge 0.01\text{ mg/L} \implies H_a: \mu < 0.01\text{ mg/L}

    Correct

    H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L} (or μ≤0.010 mg/L\mu \le 0.010\text{ mg/L}) and Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}

    A violation of the threshold means arsenic levels exceed the legal limit. Therefore, the alternative hypothesis must test μ>0.010 mg/L\mu > 0.010\text{ mg/L}, with the null hypothesis stating μ≤0.010 mg/L\mu \le 0.010\text{ mg/L} (or μ=0.010 mg/L\mu = 0.010\text{ mg/L}).

  3. Step 3

    H0:μ≥10 ppb  ⟹  Ha:μ<10 ppbH_0: \mu \ge 10\text{ ppb} \implies H_a: \mu < 10\text{ ppb}

    Correct

    H0:μ=10 ppbH_0: \mu = 10\text{ ppb} (or μ≤10 ppb\mu \le 10\text{ ppb}) and Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

    Following the same logic in units of ppb, violating the 10 ppb10\text{ ppb} standard requires evidence that the mean level exceeds 10 ppb10\text{ ppb}, giving Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}.

WHAT YOU DID WELL
Compliments from Your Teacher

You performed the unit conversion from ppb\text{ppb} to mg/L\text{mg/L} accurately.

You properly used the population parameter μ\mu rather than a sample statistic like xˉ\bar{x}.

You included complementary inequalities with equality assigned to the null hypothesis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Inequality Direction in Hypotheses

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted violating a regulatory threshold as being strictly less than the numerical standard rather than exceeding the maximum allowable contaminant level.

REASONING PATH
Your ACEpath teacher’s suggested approach
Translate the Research Claim to the Alternative Hypothesis
  • The alternative hypothesis HaH_a represents the claim or condition that requires evidence to support, typically a violation, excess, or significant change.

  • Read the context carefully to see whether violating a standard means being greater than (>>) or less than (<<) the threshold limit.

Establish the Null Hypothesis Baseline
  • The null hypothesis H0H_0 represents compliance, no effect, or the safe status quo, and it must contain equality (==, ≤\le, or ≥\ge).

  • Ensure that if HaH_a contains >>, H0H_0 contains ≤\le or ==.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the violation condition: Arsenic is a harmful contaminant, so violating the standard means exceeding the threshold: μ>0.010 mg/L\mu > 0.010\text{ mg/L}.

  2. Assign this research suspicion to the alternative hypothesis: Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}.

  3. Assign the compliant condition (status quo) containing equality to the null hypothesis: H0:μ≤0.010 mg/LH_0: \mu \le 0.010\text{ mg/L} (or H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L}).

  4. Apply the identical logic to the threshold in parts per billion: H0:μ≤10 ppbH_0: \mu \le 10\text{ ppb} and Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}.

Final answer

(a) 0.010 mg/L0.010\text{ mg/L}; (b) H0:μ=0.010 mg/LH_0: \mu = 0.010\text{ mg/L} versus Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}; (c) H0:μ=10 ppbH_0: \mu = 10\text{ ppb} versus Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review whether the claim under investigation represents an increase, a decrease, or merely a difference before writing inequality signs.

  • Practice distinguishing maximum contaminant limits (where violations are >>) from minimum required standards (where violations are <<).

  • Complete the three targeted practice problems below to master setting up one-sided hypothesis tests.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 0.001 instead of multiplying, incorrectly calculating the threshold as 10000 mg/L and carrying this erroneous value into the hypotheses in mg/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    10/0.001=10000 mg/L10 / 0.001 = 10000\text{ mg/L}

    Correct

    10×0.001 mg/L=0.010 mg/L10 \times 0.001\text{ mg/L} = 0.010\text{ mg/L}

    You divided by the conversion factor 0.001 mg/L per ppb0.001\text{ mg/L per ppb} instead of multiplying. Since 1 ppb=0.001 mg/L1\text{ ppb} = 0.001\text{ mg/L}, 10 ppb10\text{ ppb} corresponds to 10×0.001=0.010 mg/L10 \times 0.001 = 0.010\text{ mg/L}.

  2. Step 2

    H0:μ≤10000 mg/LH_0: \mu \le 10000\text{ mg/L}, Ha:μ>10000 mg/LH_a: \mu > 10000\text{ mg/L}

    Correct

    H0:μ=0.010 mg/L (or μ≤0.010 mg/L)H_0: \mu = 0.010\text{ mg/L}\text{ (or }\mu \le 0.010\text{ mg/L)} and Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}

    Your hypothesis symbols, parameter notation μ\mu, and inequality direction (>> for exceeding the limit) are completely correct, but the numerical value was carried forward from the unit conversion error in part (a).

  3. Step 3

    H0:μ≤10 ppbH_0: \mu \le 10\text{ ppb}, Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct population parameter μ\mu rather than a sample statistic like xˉ\bar{x}.

You correctly identified the research claim as a right-tailed alternative hypothesis (Ha:μ>thresholdH_a: \mu > \text{threshold}).

You stated the hypotheses in ppb\text{ppb} completely accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Inversion

You divided by 0.0010.001 rather than multiplying when converting from parts per billion to milligrams per liter.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the conversion factor during dimensional analysis: when a unit conversion is given as 1 unitA=k unitB1\text{ unit}_A = k\text{ unit}_B, finding the amount of unitB\text{unit}_B in N units of AN\text{ units of }A requires multiplying by kk, not dividing.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Setup
  • Write conversion factors as fractions with canceling units: N ppb×(0.001 mg/L1 ppb)N\text{ ppb} \times \left(\frac{0.001\text{ mg/L}}{1\text{ ppb}}\right).

  • Ensure the original unit cancels out in the denominator before computing.

Physical Reality Check
  • Parts per billion (ppb\text{ppb}) is a trace-level concentration, so the value in mg/L\text{mg/L} must be a very small decimal, not an enormous number like 10000 mg/L10000\text{ mg/L}.

  • Always compare the magnitude of the calculated value against common-sense physical scales.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the threshold in ppb\text{ppb} by the conversion factor: 10 ppb×0.001mg/Lppb=0.010 mg/L10\text{ ppb} \times 0.001\frac{\text{mg/L}}{\text{ppb}} = 0.010\text{ mg/L}.

  2. Substitute 0.010 mg/L0.010\text{ mg/L} into the hypothesis statements: H0:μ≤0.010 mg/LH_0: \mu \le 0.010\text{ mg/L} versus Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}.

Final answer

(a) 0.010 mg/L0.010\text{ mg/L}; (b) H0:μ≤0.010 mg/LH_0: \mu \le 0.010\text{ mg/L}, Ha:μ>0.010 mg/LH_a: \mu > 0.010\text{ mg/L}; (c) H0:μ≤10 ppbH_0: \mu \le 10\text{ ppb}, Ha:μ>10 ppbH_a: \mu > 10\text{ ppb}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out unit fractions explicitly when converting units so you can visually verify which units cancel.

  • Perform a sanity check on unit conversions by asking whether the resulting number should be larger or smaller than the starting quantity.

  • Keep practicing hypothesis formulation using the population parameter μ\mu.

Lock it in

Similar question

01

A cereal manufacturer specifies that the mean sugar content per serving must not exceed 9 grams9\text{ grams}. A consumer watchdog group tests boxes because they suspect the true mean exceeds this limit. State the null and alternative hypotheses using the parameter μ\mu.

Answer

H0:μ=9 gH_0: \mu = 9\text{ g} (or μ≤9 g\mu \le 9\text{ g}) versus Ha:μ>9 gH_a: \mu > 9\text{ g}, where μ\mu is the true mean sugar content per serving in grams. Key step: The watchdog's suspicion is specifically that the cereal exceeds the maximum limit, which directs the alternative hypothesis to be right-tailed (>>).

02

A tire manufacturer designs a model with an intended tread life mean of 50,000 miles50{,}000\text{ miles}. Quality control inspects a batch to determine if the manufacturing calibration has drifted in either direction. State the null and alternative hypotheses using the parameter μ\mu.

Answer

H0:μ=50,000 milesH_0: \mu = 50{,}000\text{ miles} versus Ha:μ≠50,000 milesH_a: \mu \ne 50{,}000\text{ miles}, where μ\mu is the true mean tread life. Key step: Because the concern is whether the process has drifted in either direction (too high or too low), the test is non-directional (two-tailed, ≠\ne).

03

A city water department requires residual chlorine concentrations to remain between 0.2 mg/L0.2\text{ mg/L} and 4.0 mg/L4.0\text{ mg/L}. An environmental inspector specifically suspects that a remote neighborhood is receiving water with insufficient disinfection (chlorine levels below the legal minimum). State the null and alternative hypotheses for this investigation.

Answer

H0:μ=0.2 mg/LH_0: \mu = 0.2\text{ mg/L} (or μ≥0.2 mg/L\mu \ge 0.2\text{ mg/L}) versus Ha:μ<0.2 mg/LH_a: \mu < 0.2\text{ mg/L}, where μ\mu is the true mean chlorine concentration. Key step: The suspicion focuses strictly on failing the lower bound ('insufficient' / 'below minimum'), which makes this a left-tailed test (<<).

Loading workspace…