Resources

A point P(2,−1)P(2, -1) is first rotated counterclockwise by an angle θ\theta about the origin, where 0∘<θ<360∘0^\circ < \theta < 360^\circ, and then reflected across the xx-axis. If the final image of PP after this composite transformation lies on the positive yy-axis at the point (0,5)(0, \sqrt{5}), determine the angle of rotation θ\theta in degrees.

Answer and steps

Final answer

θ=153.4∘\theta = 153.4^\circ (or θ=90∘+arctan⁡(2)≈153.43∘\theta = 90^\circ + \arctan(2) \approx 153.43^\circ)

Steps

01

Analyze the Geometry of the Initial Point PP

The given point is P(2,−1)P(2, -1).

  1. Distance from the origin (radius rr): r=22+(−1)2=4+1=5r = \sqrt{2^2 + (-1)^2} = \sqrt{4 + 1} = \sqrt{5}
  2. Angle in standard position: Point PP lies in Quadrant IV.

    • The reference angle with the positive xx-axis is: α=arctan⁡(∣y∣∣x∣)=arctan⁡(12)≈26.57∘\alpha = \arctan\left(\frac{|y|}{|x|}\right) = \arctan\left(\frac{1}{2}\right) \approx 26.57^\circ
    • The complementary angle that the segment OPOP makes with the negative yy-axis is: ϕ=arctan⁡(∣x∣∣y∣)=arctan⁡(2)≈63.43∘\phi = \arctan\left(\frac{|x|}{|y|}\right) = \arctan(2) \approx 63.43^\circ
    • Since these two angles are complementary in the right triangle formed with the axes: arctan⁡(2)+arctan⁡(12)=90∘\arctan(2) + \arctan\left(\frac{1}{2}\right) = 90^\circ

02

Formulate the Composite Transformation

Let P′(x′,y′)P'(x', y') be the intermediate point after a counterclockwise rotation by θ\theta about the origin, and let P′′(x′′,y′′)P''(x'', y'') be the final image after reflecting P′P' across the xx-axis.

  1. Rotation by θ\theta counterclockwise: The standard rotation formulas give: x′=xcos⁡θ−ysin⁡θ=2cos⁡θ−(−1)sin⁡θ=2cos⁡θ+sin⁡θx' = x\cos\theta - y\sin\theta = 2\cos\theta - (-1)\sin\theta = 2\cos\theta + \sin\theta y′=xsin⁡θ+ycos⁡θ=2sin⁡θ+(−1)cos⁡θ=2sin⁡θ−cos⁡θy' = x\sin\theta + y\cos\theta = 2\sin\theta + (-1)\cos\theta = 2\sin\theta - \cos\theta
  2. Reflection across the xx-axis: Reflecting across the xx-axis preserves the xx-coordinate and negates the yy-coordinate: x′′=x′=2cos⁡θ+sin⁡θx'' = x' = 2\cos\theta + \sin\theta y′′=−y′=−(2sin⁡θ−cos⁡θ)=cos⁡θ−2sin⁡θy'' = -y' = -(2\sin\theta - \cos\theta) = \cos\theta - 2\sin\theta

03

Solve for the Angle of Rotation θ\theta

We are given that the final image lies on the positive yy-axis at P′′(0,5)P''(0, \sqrt{5}):

  • The xx-coordinate must be zero: 2cos⁡θ+sin⁡θ=0  ⟹  sin⁡θ=−2cos⁡θ2\cos\theta + \sin\theta = 0 \implies \sin\theta = -2\cos\theta

Dividing both sides by cos⁡θ\cos\theta (since cos⁡θ≠0\cos\theta \neq 0): tan⁡θ=−2\tan\theta = -2

Geometrically, this aligns the direction of the vector with the coordinate axes. Using the complementary relationship arctan⁡(2)=90∘−arctan⁡(0.5)\arctan(2) = 90^\circ - \arctan(0.5): θ=180∘−arctan⁡(12)=90∘+arctan⁡(2)\theta = 180^\circ - \arctan\left(\frac{1}{2}\right) = 90^\circ + \arctan(2)

Evaluating numerically: θ=90∘+63.43∘≈153.4∘\theta = 90^\circ + 63.43^\circ \approx 153.4^\circ

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the order of transformations, applying the reflection across the x-axis first and then rotating by θ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Reflect P(2,−1)P(2, -1) across the xx-axis to get P′(2,1)  ⟹  Rotate P′(2,1) by θ counterclockwise to reach (0,5)P'(2, 1) \implies \text{Rotate } P'(2, 1) \text{ by } \theta \text{ counterclockwise to reach } (0, \sqrt{5})

    Correct

    Rotate P(2,−1)P(2, -1) counterclockwise by θ\theta first to get P′P', then reflect P′P' across the xx-axis to reach P′′(0,5)P''(0, \sqrt{5})

    You reversed the order of the composite transformation. The problem specifies that the point is rotated first by θ\theta and then reflected across the xx-axis. Because geometric transformations are generally non-commutative, swapping their order changes the required angle.

  2. Step 2

    Angle of P′P' is α=arctan⁡(12)≈26.57∘  ⟹  The image (0,5) is on the positive y-axis at 90∘\alpha = \arctan\left(\frac{1}{2}\right) \approx 26.57^\circ \implies \text{The image } (0, \sqrt{5}) \text{ is on the positive } y\text{-axis at } 90^\circ

    Correct

    x′′=2cos⁡θ+sin⁡θ=0  ⟹  tan⁡θ=−2x'' = 2\cos\theta + \sin\theta = 0 \implies \tan\theta = -2

    You calculated the angles correctly based on your reversed setup, but this step is affected by applying the reflection before the rotation.

  3. Step 3

    θ=90∘−26.57∘=63.43∘\theta = 90^\circ - 26.57^\circ = 63.43^\circ

    Correct

    θ=90∘+arctan⁡(2)≈153.4∘\theta = 90^\circ + \arctan(2) \approx 153.4^\circ

    Your subtraction is mathematically consistent with your intermediate values, but the resulting angle is incorrect due to the reversed transformation order in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the reflection of P(2,−1)P(2, -1) across the xx-axis as (2,1)(2, 1).

You correctly used arctan⁡(12)≈26.57∘\arctan\left(\frac{1}{2}\right) \approx 26.57^\circ to find the reference angle.

You correctly recognized that the point (0,5)(0, \sqrt{5}) lies on the positive yy-axis at an angle of 90∘90^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed transformation order

No, this is a conceptual misunderstanding of composite transformation order rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the transformation order could be interchanged or evaluated in reverse order. Rotation and reflection do not commute (Rθ∘rx≠rx∘RθR_\theta \circ r_x \neq r_x \circ R_\theta), so executing the reflection first changes the required rotation angle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Respect Transformation Order
  • In composite transformations, operations must occur in the exact sequence described: (T2∘T1)(P)=T2(T1(P))(T_2 \circ T_1)(P) = T_2(T_1(P)), where T1T_1 acts first.

  • Write out the sequence step by step or work backward using inverse transformations in reverse order.

Non-Commutative Property
  • Rotations and reflections generally do not commute (Rθ∘r≠r∘RθR_\theta \circ r \neq r \circ R_\theta).

  • Never interchange the order of rotation and reflection unless an explicit symmetry guarantees equivalence.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the intermediate point P′P' after rotating P(2,−1)P(2, -1) counterclockwise by θ\theta: x′=2cos⁡θ+sin⁡θx' = 2\cos\theta + \sin\theta and y′=2sin⁡θ−cos⁡θy' = 2\sin\theta - \cos\theta.

  2. Reflect P′P' across the xx-axis to find the final image P′′P'': x′′=x′=2cos⁡θ+sin⁡θx'' = x' = 2\cos\theta + \sin\theta and y′′=−y′=cos⁡θ−2sin⁡θy'' = -y' = \cos\theta - 2\sin\theta.

  3. Set the coordinates equal to (0,5)(0, \sqrt{5}): 2cos⁡θ+sin⁡θ=0  ⟹  sin⁡θ=−2cos⁡θ  ⟹  tan⁡θ=−22\cos\theta + \sin\theta = 0 \implies \sin\theta = -2\cos\theta \implies \tan\theta = -2.

  4. Determine θ\theta such that the image lands on the positive yy-axis: θ=90∘+arctan⁡(2)=180∘−arctan⁡(0.5)≈153.4∘\theta = 90^\circ + \arctan(2) = 180^\circ - \arctan(0.5) \approx 153.4^\circ.

Final answer

θ≈153.4∘\theta \approx 153.4^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice tracking composite transformations chronologically by writing coordinate mappings for each step separately.

  • Try working backwards from the final point using inverse transformations in reverse order to check your work.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to reverse the reflection across the x-axis and mistakenly assumes the rotated point is the final point (0, √5) on the positive y-axis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    The rotated point is on the positive yy-axis at (0,5)  ⟹  Angle of the rotated point is 90∘(0, \sqrt{5}) \implies \text{Angle of the rotated point is } 90^\circ

    Correct

    The intermediate rotated point P′P' is obtained by reversing the reflection across the xx-axis from (0,5)(0, \sqrt{5}), yielding P′(0,−5)P'(0, -\sqrt{5}) on the negative yy-axis.

    You treated (0,5)(0, \sqrt{5}) as the point directly resulting from the rotation. Because (0,5)(0, \sqrt{5}) is the position after reflecting across the xx-axis, you must undo that reflection first, giving the rotated point (0,−5)(0, -\sqrt{5}).

  2. Step 2

    Angle of initial point \text{Angle of initial point } P(2, -1)  is \text{ is } 360^∘\circ - \arctan(12)\left(\frac{1}{2}\right) ≈\approx 333.43^∘\circ

  3. Step 3

    θ\theta = 90^∘\circ - 333.43^∘\circ + 360^∘\circ = 116.57^∘\circ

    Correct

    Determine \text{Determine } θ\theta  using the correct intermediate point or composite transformation equations: \text{ using the correct intermediate point or composite transformation equations: } θ\theta = 90^∘\circ + \arctan(2) ≈\approx 153.4^∘\circ

    Your subtraction method to find the counterclockwise rotation angle was mathematically valid, but your result was affected by substituting 90∘90^\circ instead of accounting for the reflection.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the standard-position angle of the initial point P(2,−1)P(2, -1) as approximately 333.43∘333.43^\circ.

You correctly set up the counterclockwise angle subtraction θ=θtarget−θinitial+360∘\theta = \theta_{\text{target}} - \theta_{\text{initial}} + 360^\circ to find a positive angle of rotation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted inverse transformation in composite mapping

You equated the rotated intermediate point directly to the final point (0,5)(0, \sqrt{5}), skipping the second transformation in the sequence.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When analyzing a composite transformation P→T1P′→T2P′′P \xrightarrow{T_1} P' \xrightarrow{T_2} P'', finding an unknown parameter in T1T_1 requires working backward from the final image using P′=T2−1(P′′)P' = T_2^{-1}(P'') rather than assuming P′=P′′P' = P''.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reverse composite transformations in backwards order
  • For a two-stage composite map P→RotateP′→ReflectP′′P \xrightarrow{\text{Rotate}} P' \xrightarrow{\text{Reflect}} P'', the intermediate point is P′=Reflect−1(P′′)P' = \text{Reflect}^{-1}(P'').

  • Reflect (0,5)(0, \sqrt{5}) across the xx-axis to obtain the intermediate point P′(0,−5)P'(0, -\sqrt{5}) before finding the angle of rotation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Undo the reflection across the xx-axis: reflecting the final point (0,5)(0, \sqrt{5}) across the xx-axis gives the intermediate rotated point P′(0,−5)P'(0, -\sqrt{5}).

  2. Express the coordinates of P′P' after rotating P(2,−1)P(2, -1) counterclockwise by θ\theta: x′=2cos⁡θ+sin⁡θx' = 2\cos\theta + \sin\theta and y′=2sin⁡θ−cos⁡θy' = 2\sin\theta - \cos\theta.

  3. Set x′=0x' = 0 because P′P' lies on the yy-axis: 2cos⁡θ+sin⁡θ=0  ⟹  tan⁡θ=−22\cos\theta + \sin\theta = 0 \implies \tan\theta = -2.

  4. Solve for the rotation angle that aligns with the transformation conditions: θ=90∘+arctan⁡(2)≈153.4∘\theta = 90^\circ + \arctan(2) \approx 153.4^\circ.

Final answer

θ=90∘+arctan⁡(2)≈153.4∘\theta = 90^\circ + \arctan(2) \approx 153.4^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Label intermediate points clearly as P→P′→P′′P \to P' \to P'' whenever solving composite transformation problems.

  • When given the final coordinates, apply inverse transformations in reverse order to determine each intermediate state.

OverviewACEpath Teacher's Diagnosis

03 The student reflects across the y-axis instead of the x-axis when reversing the reflection step.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Reverse reflection across yy-axis gives intermediate point (0,5)(0, \sqrt{5})   ⟹  \implies The rotated point is at 90∘90^\circ

    Correct

    Reflecting (0,5)(0, \sqrt{5}) back across the xx-axis gives the intermediate point (0,−5)(0, -\sqrt{5}), which lies at an angle of 270∘270^\circ (or −90∘-90^\circ).

    You reversed a reflection across the yy-axis rather than the xx-axis. Because the transformation reflected the point across the xx-axis, reversing it negates the yy-coordinate, giving (0,−5)(0, -\sqrt{5}) on the negative yy-axis.

  2. Step 2

    Initial point P(2,−1)P(2, -1) has angle α=−arctan⁡(12)≈−26.57∘\alpha = -\arctan\left(\frac{1}{2}\right) \approx -26.57^\circ

  3. Step 3

    θ=90∘−(−26.57∘)=116.57∘\theta = 90^\circ - (-26.57^\circ) = 116.57^\circ

    Correct

    θ=270∘−(−26.57∘)=296.57∘\theta = 270^\circ - (-26.57^\circ) = 296.57^\circ

    Your subtraction method was correct, but your final angle was affected by using 90∘90^\circ instead of 270∘270^\circ from the reflection error in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the direction angle of the starting point P(2,−1)P(2, -1) using the inverse tangent function.

You correctly set up the angular difference θ=θintermediate−α\theta = \theta_{\text{intermediate}} - \alpha to solve for the rotation angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Axis Confusion in Reflection

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the reflection across the xx-axis with a reflection across the yy-axis when working backward from the final image. A reflection across the xx-axis maps (x,y)↦(x,−y)(x, y) \mapsto (x, -y), which inverts the sign of the yy-coordinate rather than keeping it unchanged on the yy-axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coordinate rules for reflections across axes
  • Reflecting across the xx-axis preserves xx and negates yy: (x,y)↦(x,−y)(x, y) \mapsto (x, -y). Reflecting across the yy-axis preserves yy and negates xx: (x,y)↦(−x,y)(x, y) \mapsto (-x, y).

  • Always write out the mapping rule for the specific named axis before applying it to points lying on a coordinate axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Reflect the final point (0,5)(0, \sqrt{5}) back across the xx-axis: (x′,y′)=(0,−5)(x', y') = (0, -\sqrt{5}).

  2. Identify the angle of this intermediate point on the negative yy-axis: θ′=270∘\theta' = 270^\circ.

  3. Subtract the initial point's angle α≈−26.57∘\alpha \approx -26.57^\circ: θ=270∘−(−26.57∘)=296.57∘\theta = 270^\circ - (-26.57^\circ) = 296.57^\circ.

Final answer

θ≈296.6∘\theta \approx 296.6^\circ (or 270∘+arctan⁡(0.5)270^\circ + \arctan(0.5))

NEXT STEPS
Final Takeaways from Your Teacher
  • Review coordinate reflection rules: explicitly write (x,−y)(x, -y) for the xx-axis and (−x,y)(-x, y) for the yy-axis.

  • When undoing composite transformations, invert each step in reverse order and sketch the intermediate point on a coordinate grid to verify its quadrant.

Lock it in

Similar question

01

A point A(3,0)A(3, 0) is first reflected across the yy-axis and then rotated 90∘90^\circ counterclockwise about the origin. Determine the coordinates of the final image.

Answer

(0,−3)(0, -3). First, reflect A(3,0)A(3, 0) across the yy-axis to get A′(−3,0)A'(-3, 0). Then, rotate A′(−3,0)A'(-3, 0) counterclockwise by 90∘90^\circ to reach A′′(0,−3)A''(0, -3).

02

A point B(1,2)B(1, 2) is rotated 90∘90^\circ counterclockwise about the origin, and the resulting image is then reflected across the line y=xy = x. Find the coordinates of the final point.

Answer

(1,−2)(1, -2). First, rotating B(1,2)B(1, 2) by 90∘90^\circ counterclockwise maps (x,y)→(−y,x)(x, y) \to (-y, x), yielding B′(−2,1)B'(-2, 1). Next, reflecting across y=xy = x swaps coordinates, giving B′′(1,−2)B''(1, -2).

03

A point C(1,3)C(1, \sqrt{3}) is first rotated counterclockwise by an angle θ\theta (0∘<θ<360∘0^\circ < \theta < 360^\circ) about the origin and then reflected across the xx-axis. If the final image lies at (0,2)(0, 2) on the positive yy-axis, find θ\theta.

Answer

θ=210∘\theta = 210^\circ. Work backward: reflecting (0,2)(0, 2) across the xx-axis gives the pre-reflection image C′(0,−2)C'(0, -2), which lies at direction angle 270∘270^\circ. The initial point C(1,3)C(1, \sqrt{3}) has direction angle 60∘60^\circ. The counterclockwise rotation angle is θ=270∘−60∘=210∘\theta = 270^\circ - 60^\circ = 210^\circ.

Loading workspace…