Resources

In a geometry problem, a student calculates the volume of a right circular cylinder whose radius is given as r=50 cmr = 50\text{ cm} and height is h=2 mh = 2\text{ m}: Step 1: Use the volume formula V=πr2hV = \pi r^2 h. Step 2: Substitute the numerical values directly: V=π(50)2(2)=5000πV = \pi (50)^2 (2) = 5000\pi. Step 3: State the volume as 5000π m35000\pi\text{ m}^3. Identify the unit-conversion error, specify the step where it occurred, and compute the correct volume in cubic meters (m3\text{m}^3) in terms of π\pi.

Answer and steps

Final answer

Error in Step 2; radius in centimeters was substituted directly with height in meters without converting to consistent units (50 cm=0.5 m50\text{ cm} = 0.5\text{ m}); the correct volume is V=π(0.5 m)2(2 m)=0.5π m3V = \pi (0.5\text{ m})^2 (2\text{ m}) = 0.5\pi\text{ m}^3 (or π2 m3\frac{\pi}{2}\text{ m}^3).

Steps

01

Identify the Step Containing the Error

The error occurs in Step 2.

In Step 1, the student correctly chooses the geometric formula for the volume of a right circular cylinder: V=πr2hV = \pi r^2 h

However, before substituting numbers into a formula, all linear dimensions must be expressed in the same unit of measurement.

  • The given radius is r=50 cmr = 50\text{ cm}.
  • The given height is h=2 mh = 2\text{ m}.

In Step 2, the student substituted the numbers 5050 and 22 directly without converting them to a common unit. This treated centimeters and meters as if they were identical, producing a value in mixed units (cm2⋅m\text{cm}^2 \cdot \text{m}) rather than cubic meters (m3\text{m}^3).


02

Convert to Consistent Units

Because the final volume is requested in cubic meters (m3\text{m}^3), convert the radius from centimeters to meters using the conversion factor 1 m=100 cm1\text{ m} = 100\text{ cm}: r=50 cm=50100 m=0.5 m=12 mr = 50\text{ cm} = \frac{50}{100}\text{ m} = 0.5\text{ m} = \frac{1}{2}\text{ m}

The height is already in meters: h=2 mh = 2\text{ m}


03

Compute the Correct Volume

Substitute the consistent values into the volume formula: V=πr2h=π(0.5 m)2(2 m)V = \pi r^2 h = \pi (0.5\text{ m})^2 (2\text{ m})

Evaluate the square and multiply: V=π⋅0.25⋅2=0.5π m3(or π2 m3)V = \pi \cdot 0.25 \cdot 2 = 0.5\pi\text{ m}^3 \quad \left(\text{or } \frac{\pi}{2}\text{ m}^3\right)


Common Pitfall

A common mistake is attempting to fix the error at the end by dividing the result by 100100 instead of accounting for the squared dimension. Because volume uses r2r^2, substituting rr in centimeters without conversion makes the result off by a factor of 1002=10,000100^2 = 10{,}000, not 100100: 5000π10,000=0.5π m3\frac{5000\pi}{10{,}000} = 0.5\pi\text{ m}^3 Always convert all given measurements to the desired target units before substituting them into formulas.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student squares the converted radius incorrectly as 2.5 instead of 0.25, leading to an incorrect volume of 5π m³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The radius is in cm\text{cm} and the height is in m\text{m}, so the units do not match. ⟹\Longrightarrow The error occurred in Step 2.

  2. Step 2

    r=50 cm=0.5 mr = 50\text{ cm} = 0.5\text{ m}

  3. Step 3

    V=π(0.5)2(2)=π(2.5)(2)=5π m3V = \pi(0.5)^2(2) = \pi(2.5)(2) = 5\pi\text{ m}^3

    Correct

    V=π(0.5)2(2)=π(0.25)(2)=0.5π m3V = \pi(0.5)^2(2) = \pi(0.25)(2) = 0.5\pi\text{ m}^3

    You squared 0.50.5 incorrectly as 2.52.5. Squaring a decimal with one decimal place produces two decimal places: (0.5)2=0.5×0.5=0.25(0.5)^2 = 0.5 \times 0.5 = 0.25 (or (12)2=14(\frac{1}{2})^2 = \frac{1}{4}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly pointed out that the radius and height had inconsistent units.

You correctly identified Step 2 as the step where the error occurred.

You correctly converted the radius from 50 cm50\text{ cm} to 0.5 m0.5\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decimal Squaring Misconception

You wrote (0.5)2=2.5(0.5)^2 = 2.5, multiplying 5×5=255 \times 5 = 25 but placing the decimal point after only one decimal digit instead of two.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Miscounting decimal place values when squaring decimals less than 11. When a number has 11 decimal place, its square must have 1×2=21 \times 2 = 2 decimal places.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fraction Conversion Check
  • Converting decimals to simple fractions makes powers straightforward and prevents decimal point placement errors.

  • Rewrite 0.50.5 as 12\frac{1}{2}, then compute (12)2=14=0.25(\frac{1}{2})^2 = \frac{1}{4} = 0.25.

Decimal Place Value Rule
  • When multiplying two decimals, the product must have as many decimal places as the sum of the decimal places in the factors.

  • Since 0.50.5 has 11 decimal place, 0.5×0.50.5 \times 0.5 must have 1+1=21 + 1 = 2 decimal places, giving 0.250.25.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute r=0.5 mr = 0.5\text{ m} and h=2 mh = 2\text{ m} into V=πr2hV = \pi r^2 h: V=π(0.5)2(2)V = \pi (0.5)^2 (2).

  2. Evaluate (0.5)2=0.25(0.5)^2 = 0.25.

  3. Multiply: V=π×0.25×2=0.5π m3V = \pi \times 0.25 \times 2 = 0.5\pi\text{ m}^3.

Final answer

0.5π m30.5\pi\text{ m}^3 (or π2 m3\frac{\pi}{2}\text{ m}^3)

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check powers of decimals by converting them to fractions (e.g., 0.5=120.5 = \frac{1}{2}).

  • Count total decimal places whenever multiplying decimals: 11 decimal place squared results in 22 decimal places.

  • Sanity-check values: squaring a positive number less than 11 must always result in a smaller number, so (0.5)2(0.5)^2 cannot be greater than 0.50.5.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies Step 3 as the location of the error, believing the substitution in Step 2 was valid but the final unit label was wrong.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The radius was given in centimeters while the height was in meters, so the units were inconsistent.

  2. Step 2

    The error occurred in Step 3.

    Correct

    The error occurred in Step 2.

    You identified Step 3 as the location of the mistake, but the mathematical error actually occurred in Step 2. In Step 2, numbers representing centimeters and meters were substituted directly into the formula as if they shared the same unit.

  3. Step 3

    r=0.5 m  ⟹  h=2 m  ⟹  V=π(0.5)2(2)=0.5π m3r = 0.5\text{ m} \implies h = 2\text{ m} \implies V = \pi (0.5)^2 (2) = 0.5\pi\text{ m}^3

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized the unit mismatch between centimeters and meters.

You accurately converted 50 cm50\text{ cm} to 0.5 m0.5\text{ m} before calculating.

You successfully evaluated the volume formula to get 0.5π m30.5\pi\text{ m}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying error location in unit substitution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the substitution in Step 2 as purely numerical and viewed the error merely as an incorrect unit tag attached in Step 3, rather than recognizing that substituting quantities with mismatched dimensions invalidates the equation at the moment of substitution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locating the First Invalid Step
  • An algebraic substitution step is mathematically invalid if the numerical values come from inconsistent units.

  • Check each line chronologically: pinpoint the exact step where mismatched units first enter an equation, rather than the later line where the unit label is written.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the first invalid step: In Step 2, r=50 cmr = 50\text{ cm} and h=2 mh = 2\text{ m} were substituted into V=πr2hV = \pi r^2 h without unit harmonization, producing an expression with mixed units cm2⋅m\text{cm}^2 \cdot \text{m}.

  2. Convert all linear measurements to meters before substitution: r=50 cm=0.5 mr = 50\text{ cm} = 0.5\text{ m} and h=2 mh = 2\text{ m}.

  3. Substitute the consistent values into the formula: V=π(0.5 m)2(2 m)=0.5π m3V = \pi (0.5\text{ m})^2 (2\text{ m}) = 0.5\pi\text{ m}^3.

Final answer

The error occurred in Step 2; the correct volume is 0.5π m30.5\pi\text{ m}^3 (or π2 m3\frac{\pi}{2}\text{ m}^3).

NEXT STEPS
Final Takeaways from Your Teacher
  • When auditing multi-step solutions, inspect the substitution line to confirm all variables have identical linear units before evaluating.

  • Practice distinguishing between an incorrect numerical substitution (occurring at the substitution step) and an incorrect unit label (occurring when units were already consistent).

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly divides by 10 instead of 100 when converting centimeters to meters, resulting in r = 5 m and a volume of 50π m³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The radius in centimeters was substituted directly without converting to meters. \Longrightarrow The error occurred in Step 2.

  2. Step 2

    r = 50 cm\text{ cm} = 5 m\text{ m}

    Correct

    r = 50 cm\text{ cm} = \frac{50}{100}$$\text{ m} = 0.5$\text{ m}$$

    You converted 50 cm50\text{ cm} to 5 m5\text{ m} by dividing by 1010 instead of 100100. Since 1 m=100 cm1\text{ m} = 100\text{ cm}, 50 cm=0.5 m50\text{ cm} = 0.5\text{ m}.

  3. Step 3

    V = π\pi(5)^2(2) = π\pi(25)(2) = 50\pi$$\text{ m}^3$$

    Correct

    V = π\pi(0.5)^2(2) = π\pi(0.25)(2) = 0.5\pi$$\text{ m}^3$$

    Your substitution and arithmetic were carried out correctly using your radius of 5 m5\text{ m}, but the final volume is incorrect due to the conversion error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the original error happened in Step 2 due to unaligned units.

You correctly applied the volume formula V=πr2hV = \pi r^2 h using the height h=2 mh = 2\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric unit conversion factor error

Dividing by 1010 instead of 100100 when converting centimeters to meters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the metric prefix 'centi-' (10−210^{-2}, or 100 cm=1 m100\text{ cm} = 1\text{ m}) with 'deci-' (10−110^{-1}, or 10 dm=1 m10\text{ dm} = 1\text{ m}), leading to an overestimate of the radius by a factor of 1010.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the prefix value
  • The prefix 'centi-' means one-hundredth: 1 m=100 cm1\text{ m} = 100\text{ cm}, so 1 cm=0.01 m1\text{ cm} = 0.01\text{ m}.

  • Always divide centimeters by 100100 when converting to meters.

Perform a reality check on magnitude
  • A meter is roughly a yard (100 cm100\text{ cm}); 50 cm50\text{ cm} is half of a meter, not five meters.

  • Before squaring, check whether your converted value makes physical sense compared to the original length.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the radius to meters using 1 m=100 cm1\text{ m} = 100\text{ cm}: r=50100 m=0.5 mr = \frac{50}{100}\text{ m} = 0.5\text{ m}.

  2. Substitute r=0.5 mr = 0.5\text{ m} and h=2 mh = 2\text{ m} into V=πr2hV = \pi r^2 h: V=π(0.5)2(2)V = \pi (0.5)^2 (2).

  3. Simplify the product: V=π(0.25)(2)=0.5π m3V = \pi (0.25)(2) = 0.5\pi\text{ m}^3.

Final answer

0.5\pi$$\text{ m}^3  (or \text{ (or } \frac{\pi}{2}$$\text{ m}^3)\text{)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard metric prefixes (milli- =10−3= 10^{-3}, centi- =10−2= 10^{-2}, deci- =10−1= 10^{-1}, kilo- =103= 10^3).

  • Practice converting linear dimensions to target units before substituting into geometric formulas.

Lock it in

Similar question

01

A right circular cylinder has radius r=0.4 mr = 0.4\text{ m} and height h=5 mh = 5\text{ m}. Compute its volume in terms of π\pi.

Answer

0.8π m30.8\pi\text{ m}^3. Key steps: V=πr2h=π(0.4)2(5)=π(0.16)(5)=0.8π m3V = \pi r^2 h = \pi (0.4)^2 (5) = \pi (0.16)(5) = 0.8\pi\text{ m}^3.

02

A cone has height h=3 mh = 3\text{ m} and radius r=20 cmr = 20\text{ cm}. Find its volume in cubic meters in terms of π\pi. (V=13πr2hV = \frac{1}{3}\pi r^2 h)

Answer

0.04π m30.04\pi\text{ m}^3 (or π25 m3\frac{\pi}{25}\text{ m}^3). Key steps: convert r=20 cm=0.2 mr = 20\text{ cm} = 0.2\text{ m}; square (0.2)2=0.04(0.2)^2 = 0.04; evaluate V=13π(0.04)(3)=0.04π m3V = \frac{1}{3}\pi (0.04)(3) = 0.04\pi\text{ m}^3.

03

A student calculates the volume of a sphere of radius r=30 cmr = 30\text{ cm} using V=43πr3V = \frac{4}{3}\pi r^3: they write r=0.3 mr = 0.3\text{ m} and compute (0.3)3=0.27(0.3)^3 = 0.27. Identify the error and calculate the correct volume in m3\text{m}^3 in terms of π\pi.

Answer

The error is evaluating (0.3)3(0.3)^3 as 0.270.27 instead of 0.0270.027 (33 decimal places). Correct volume: V=43π(0.027)=0.036π m3V = \frac{4}{3}\pi (0.027) = 0.036\pi\text{ m}^3 (or 9π250 m3\frac{9\pi}{250}\text{ m}^3).

Loading workspace…