Resources

A heated metal alloy cylinder cools in an ambient laboratory environment maintained at a constant temperature of Tm=22.0∘CT_m = 22.0^\circ\text{C}. According to Newton's Law of Cooling, the temperature T(t)T(t) in degrees Celsius after tt minutes satisfies T(t)=Tm+(T0−Tm)e−ktT(t) = T_m + (T_0 - T_m)e^{-kt}. The cylinder is initially removed from an oven at T0=185.0∘CT_0 = 185.0^\circ\text{C}, and after 12.012.0 minutes its temperature drops to 110.0∘C110.0^\circ\text{C}. Rather than computing future temperatures, determine the cooling decay constant kk (in min−1\text{min}^{-1}) and the half-life t1/2t_{1/2} (in minutes) required for the temperature excess above ambient to decrease by half. Round kk to four decimal places and t1/2t_{1/2} to two decimal places.

Answer and steps

Final answer

k=0.0514 min−1k = 0.0514\text{ min}^{-1}, t1/2=13.49 mint_{1/2} = 13.49\text{ min}

Steps

01

Identify the Given Values and Set Up the Equation

Newton's Law of Cooling is given by: T(t)=Tm+(T0−Tm)e−ktT(t) = T_m + (T_0 - T_m)e^{-kt}

From the problem statement, we have:

  • Ambient room temperature: Tm=22.0∘CT_m = 22.0^\circ\text{C}
  • Initial temperature at t=0t = 0: T0=185.0∘CT_0 = 185.0^\circ\text{C}
  • Temperature at t=12.0 mint = 12.0\text{ min}: T(12.0)=110.0∘CT(12.0) = 110.0^\circ\text{C}

Calculate the initial temperature difference (temperature excess) between the cylinder and its environment: T0−Tm=185.0−22.0=163.0∘CT_0 - T_m = 185.0 - 22.0 = 163.0^\circ\text{C}

02

Calculate the Decay Constant kk

Substitute t=12.0 mint = 12.0\text{ min} and T(12.0)=110.0∘CT(12.0) = 110.0^\circ\text{C} into the cooling model: 110.0=22.0+163.0e−12.0k110.0 = 22.0 + 163.0 e^{-12.0k}

Subtract the ambient temperature 22.0∘C22.0^\circ\text{C} from both sides to find the remaining excess temperature: 88.0=163.0e−12.0k88.0 = 163.0 e^{-12.0k}

Divide by 163.0163.0 to isolate the exponential term: e−12.0k=88.0163.0e^{-12.0k} = \frac{88.0}{163.0}

Take the natural logarithm of both sides: −12.0k=ln⁡(88.0163.0)-12.0k = \ln\left(\frac{88.0}{163.0}\right)

Solve for kk: k=−112.0ln⁡(88.0163.0)≈−112.0(−0.616413)≈0.051368 min−1k = -\frac{1}{12.0} \ln\left(\frac{88.0}{163.0}\right) \approx -\frac{1}{12.0} (-0.616413) \approx 0.051368\text{ min}^{-1}

Rounding to four decimal places gives: k≈0.0514 min−1k \approx 0.0514\text{ min}^{-1}

Common Pitfall: Do not set the ratio directly as T(t)T0=110185\frac{T(t)}{T_0} = \frac{110}{185}. Newton's law applies to the temperature excess above ambient (T(t)−TmT(t) - T_m), not the absolute temperature values alone.

03

Determine the Half-Life of the Temperature Excess

The temperature excess decreases by a factor of e−kte^{-kt}. The "half-life" t1/2t_{1/2} is the time required for this excess to decrease to half of its initial value: e−kt1/2=12e^{-k t_{1/2}} = \frac{1}{2}

Taking the natural logarithm of both sides gives −kt1/2=ln⁡(12)=−ln⁡(2)-k t_{1/2} = \ln\left(\frac{1}{2}\right) = -\ln(2), which simplifies to: t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k}

Using the computed value of kk: t1/2=ln⁡(2)0.051368≈0.6931470.051368≈13.4938 mint_{1/2} = \frac{\ln(2)}{0.051368} \approx \frac{0.693147}{0.051368} \approx 13.4938\text{ min}

Rounding to two decimal places gives: t1/2≈13.49 mint_{1/2} \approx 13.49\text{ min}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the ambient temperature in the cooling model, treating the raw temperature as undergoing simple exponential decay.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T(t)=T0e−kt  ⟹  110.0=185.0e−12.0kT(t) = T_0 e^{-kt} \implies 110.0 = 185.0 e^{-12.0k}

    Correct

    T(t)=Tm+(T0−Tm)e−kt  ⟹  110.0=22.0+(185.0−22.0)e−12.0kT(t) = T_m + (T_0 - T_m)e^{-kt} \implies 110.0 = 22.0 + (185.0 - 22.0)e^{-12.0k}

    You modeled cooling as pure exponential decay toward 0∘C0^\circ\text{C} rather than decay of the temperature excess toward the ambient room temperature Tm=22.0∘CT_m = 22.0^\circ\text{C}.

  2. Step 2

    e−12.0k=110.0185.0  ⟹  −12.0k=ln⁡(110.0185.0)≈−0.5199  ⟹  k=0.519912.0≈0.0433 min−1e^{-12.0k} = \frac{110.0}{185.0} \implies -12.0k = \ln\left(\frac{110.0}{185.0}\right) \approx -0.5199 \implies k = \frac{0.5199}{12.0} \approx 0.0433\text{ min}^{-1}

    Correct

    88.0=163.0e−12.0k  ⟹  −12.0k=ln⁡(88.0163.0)  ⟹  k≈0.0514 min−188.0 = 163.0 e^{-12.0k} \implies -12.0k = \ln\left(\frac{88.0}{163.0}\right) \implies k \approx 0.0514\text{ min}^{-1}

    You solved for the exponential decay constant using correct logarithmic algebra, but the value is affected by the missing ambient temperature term.

  3. Step 3

    t1/2=ln⁡(2)k  ⟹  t1/2=ln⁡(2)0.0433≈16.01 mint_{1/2} = \frac{\ln(2)}{k} \implies t_{1/2} = \frac{\ln(2)}{0.0433} \approx 16.01\text{ min}

    Correct

    t1/2=ln⁡(2)k≈ln⁡(2)0.051368≈13.49 mint_{1/2} = \frac{\ln(2)}{k} \approx \frac{\ln(2)}{0.051368} \approx 13.49\text{ min}

    You correctly related the half-life of an exponential decay process to ln⁡(2)k\frac{\ln(2)}{k}, but propagating the incorrect value of kk led to an inaccurate final half-life.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used natural logarithms to isolate the exponential decay constant kk.

You correctly applied the half-life relationship t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of ambient temperature baseline

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated raw temperature T(t)T(t) as approaching zero asymptotically rather than modeling the temperature difference (excess) above the constant ambient temperature TmT_m.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Temperature Excess
  • Newton's Law of Cooling governs the difference ΔT(t)=T(t)−Tm\Delta T(t) = T(t) - T_m, satisfying ΔT(t)=ΔT0e−kt\Delta T(t) = \Delta T_0 e^{-kt}.

  • Always subtract ambient temperature TmT_m from both the current temperature and initial temperature before taking ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the excess temperature equation: T(t)−Tm=(T0−Tm)e−ktT(t) - T_m = (T_0 - T_m)e^{-kt}.

  2. Substitute T(12.0)=110.0∘CT(12.0) = 110.0^\circ\text{C}, T0=185.0∘CT_0 = 185.0^\circ\text{C}, and Tm=22.0∘CT_m = 22.0^\circ\text{C}: 110.0−22.0=(185.0−22.0)e−12.0k110.0 - 22.0 = (185.0 - 22.0)e^{-12.0k}.

  3. Simplify the excess values: 88.0=163.0e−12.0k88.0 = 163.0 e^{-12.0k}.

  4. Isolate kk: k=−112.0ln⁡(88.0163.0)≈0.051368 min−1≈0.0514 min−1k = -\frac{1}{12.0}\ln\left(\frac{88.0}{163.0}\right) \approx 0.051368\text{ min}^{-1} \approx 0.0514\text{ min}^{-1}.

  5. Compute half-life: t1/2=ln⁡(2)0.051368≈13.49 mint_{1/2} = \frac{\ln(2)}{0.051368} \approx 13.49\text{ min}.

Final answer

k=0.0514 min−1k = 0.0514\text{ min}^{-1}, t1/2=13.49 mint_{1/2} = 13.49\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check whether a physical cooling object cools toward 0∘C0^\circ\text{C} or toward room temperature.

  • Practice identifying the initial excess ΔT0=T0−Tm\Delta T_0 = T_0 - T_m whenever Newton's Law of Cooling is specified.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to subtract the ambient temperature from the initial temperature in the amplitude term, writing T(t) = T_m + T_0 e^(-kt).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T(t)=Tm+T0e−kt  ⟹  110.0=22.0+185.0e−12.0kT(t) = T_m + T_0 e^{-kt} \implies 110.0 = 22.0 + 185.0 e^{-12.0k}

    Correct

    T(t)=Tm+(T0−Tm)e−kt  ⟹  110.0=22.0+(185.0−22.0)e−12.0k=22.0+163.0e−12.0kT(t) = T_m + (T_0 - T_m)e^{-kt} \implies 110.0 = 22.0 + (185.0 - 22.0)e^{-12.0k} = 22.0 + 163.0e^{-12.0k}

    You replaced the amplitude of the exponential term with T0T_0 instead of the initial temperature excess (T0−Tm)(T_0 - T_m). At t=0t = 0, your formula yields T(0)=Tm+T0=207.0∘CT(0) = T_m + T_0 = 207.0^\circ\text{C} instead of the given initial temperature 185.0∘C185.0^\circ\text{C}.

  2. Step 2

    88.0=185.0e−12.0k  ⟹  e−12.0k=88.0185.0  ⟹  −12.0k=ln⁡(88.0185.0)≈−0.7431  ⟹  k=0.743112.0≈0.0619 min−188.0 = 185.0 e^{-12.0k} \implies e^{-12.0k} = \frac{88.0}{185.0} \implies -12.0k = \ln\left(\frac{88.0}{185.0}\right) \approx -0.7431 \implies k = \frac{0.7431}{12.0} \approx 0.0619\text{ min}^{-1}

    Correct

    88.0=163.0e−12.0k  ⟹  e−12.0k=88.0163.0  ⟹  k=−112.0ln⁡(88.0163.0)≈0.0514 min−188.0 = 163.0 e^{-12.0k} \implies e^{-12.0k} = \frac{88.0}{163.0} \implies k = -\frac{1}{12.0}\ln\left(\frac{88.0}{163.0}\right) \approx 0.0514\text{ min}^{-1}

    Your algebraic rearrangement and logarithm evaluation were carried out properly, but the result is affected by using 185.0185.0 instead of 163.0163.0 as the initial temperature excess.

  3. Step 3

    t1/2=ln⁡(2)k  ⟹  t1/2=ln⁡(2)0.0619≈11.20 mint_{1/2} = \frac{\ln(2)}{k} \implies t_{1/2} = \frac{\ln(2)}{0.0619} \approx 11.20\text{ min}

    Correct

    t1/2=ln⁡(2)0.051368≈13.49 mint_{1/2} = \frac{\ln(2)}{0.051368} \approx 13.49\text{ min}

    You correctly identified that the half-life of the temperature excess satisfies t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k}, but substituting your earlier value of kk carried the error into the final calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the exponential term and used natural logarithms to solve for kk.

You correctly applied the half-life relation t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k} for exponential decay.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted baseline subtraction in exponential amplitude

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the absolute initial temperature T0T_0 with the initial temperature difference (T0−Tm)(T_0 - T_m). Newton's Law of Cooling models how the temperature difference above the surrounding environment decays exponentially to zero, so the coefficient multiplying e−kte^{-kt} must be (T0−Tm)(T_0 - T_m) so that T(0)=T0T(0) = T_0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Initial Condition Verification
  • In T(t)=Tm+Ae−ktT(t) = T_m + A e^{-kt}, setting t=0t=0 must satisfy T(0)=Tm+A=T0T(0) = T_m + A = T_0, which requires A=T0−TmA = T_0 - T_m.

  • Always plug in t=0t = 0 as a quick sanity check to confirm that the model reproduces the initial temperature.

Temperature Excess Interpretation
  • Newton's Law of Cooling states that the excess temperature ΔT(t)=T(t)−Tm\Delta T(t) = T(t) - T_m decays as ΔT(t)=ΔT0e−kt\Delta T(t) = \Delta T_0 e^{-kt}.

  • Subtract ambient temperature from both initial and subsequent temperatures before taking ratios or writing exponential factors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct model: T(t)=Tm+(T0−Tm)e−kt=22.0+(185.0−22.0)e−kt=22.0+163.0e−ktT(t) = T_m + (T_0 - T_m)e^{-kt} = 22.0 + (185.0 - 22.0)e^{-kt} = 22.0 + 163.0 e^{-kt}.

  2. Substitute T(12.0)=110.0∘CT(12.0) = 110.0^\circ\text{C}: 110.0−22.0=163.0e−12.0k  ⟹  88.0=163.0e−12.0k110.0 - 22.0 = 163.0 e^{-12.0k} \implies 88.0 = 163.0 e^{-12.0k}.

  3. Solve for kk: k=−112.0ln⁡(88.0163.0)≈0.051368 min−1≈0.0514 min−1k = -\frac{1}{12.0} \ln\left(\frac{88.0}{163.0}\right) \approx 0.051368\text{ min}^{-1} \approx 0.0514\text{ min}^{-1}.

  4. Compute the half-life: t1/2=ln⁡(2)k=ln⁡(2)0.051368≈13.49 mint_{1/2} = \frac{\ln(2)}{k} = \frac{\ln(2)}{0.051368} \approx 13.49\text{ min}.

Final answer

k=0.0514 min−1k = 0.0514\text{ min}^{-1}, t1/2=13.49 mint_{1/2} = 13.49\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify that your cooling model satisfies the initial condition by checking whether T(0)T(0) equals T0T_0.

  • Practice defining the temperature difference variable ΔT(t)=T(t)−Tm\Delta T(t) = T(t) - T_m first, which simplifies Newton's cooling model to pure exponential decay ΔT(t)=ΔT0e−kt\Delta T(t) = \Delta T_0 e^{-kt}.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the half-life as the time for the total temperature T(t) to reach half of T_0 rather than the temperature excess halving.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    110.0=22.0+(185.0−22.0)e−12.0k  ⟹  88.0=163.0e−12.0k  ⟹  −12.0k=ln⁡(88.0/163.0)≈−0.6164  ⟹  k≈0.0514 min−1110.0 = 22.0 + (185.0 - 22.0)e^{-12.0k} \implies 88.0 = 163.0e^{-12.0k} \implies -12.0k = \ln(88.0/163.0) \approx -0.6164 \implies k \approx 0.0514\text{ min}^{-1}

  2. Step 2

    T(t1/2)=185.02=92.5T(t_{1/2}) = \frac{185.0}{2} = 92.5

    Correct

    T(t1/2)−Tm=12(T0−Tm)  ⟺  e−kt1/2=12T(t_{1/2}) - T_m = \frac{1}{2}(T_0 - T_m) \iff e^{-k t_{1/2}} = \frac{1}{2}

    You defined the half-life using half of the initial absolute temperature (185.0/2=92.5∘C185.0 / 2 = 92.5^\circ\text{C}). The problem specifies the half-life for the temperature excess above ambient (T(t)−TmT(t) - T_m) to decrease by half, which means the exponential decay factor itself reaches 1/21/2.

  3. Step 3

    92.5=22.0+163.0e−0.0514t1/2  ⟹  70.5=163.0e−0.0514t1/2  ⟹  −0.0514t1/2=ln⁡(70.5/163.0)≈−0.8381  ⟹  t1/2≈16.31 min92.5 = 22.0 + 163.0e^{-0.0514 t_{1/2}} \implies 70.5 = 163.0e^{-0.0514 t_{1/2}} \implies -0.0514 t_{1/2} = \ln(70.5/163.0) \approx -0.8381 \implies t_{1/2} \approx 16.31\text{ min}

    Correct

    t1/2=ln⁡2k≈0.6931470.051368≈13.49 mint_{1/2} = \frac{\ln 2}{k} \approx \frac{0.693147}{0.051368} \approx 13.49\text{ min}

    Your algebraic solving steps were executed cleanly, but the final numerical value was affected by setting the target temperature to 92.5∘C92.5^\circ\text{C} in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all given parameters from the problem statement.

You isolated the exponential decay term and solved for the decay constant kk accurately.

You maintained clear logarithmic algebraic steps throughout your calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misinterpretation of Half-Life in Newton's Law of Cooling

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the halving of the object's absolute temperature T(t)T(t) with the halving of the temperature difference (excess) above the ambient environment (T(t)−Tm)(T(t) - T_m). In Newton's Law of Cooling, exponential decay governs the excess (T−Tm)(T - T_m), meaning the half-life is simply t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify What Decays Exponentially
  • In T(t)=Tm+(T0−Tm)e−ktT(t) = T_m + (T_0 - T_m)e^{-kt}, the quantity that decays exponentially toward zero is the temperature excess ΔT(t)=T(t)−Tm\Delta T(t) = T(t) - T_m, not T(t)T(t) itself.

  • Always subtract the ambient temperature TmT_m first to focus on the excess ΔT(t)=ΔT0e−kt\Delta T(t) = \Delta T_0 e^{-kt}.

Apply Half-Life Directly to the Excess
  • When the excess halves, ΔT(t1/2)ΔT0=e−kt1/2=12\frac{\Delta T(t_{1/2})}{\Delta T_0} = e^{-kt_{1/2}} = \frac{1}{2}, leading directly to t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k}.

  • Use t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k} directly rather than calculating an absolute temperature threshold.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the ratio of the temperature excess to 1/21/2: e−kt1/2=12e^{-k t_{1/2}} = \frac{1}{2}.

  2. Take the natural logarithm of both sides: −kt1/2=−ln⁡2  ⟹  t1/2=ln⁡2k-k t_{1/2} = -\ln 2 \implies t_{1/2} = \frac{\ln 2}{k}.

  3. Substitute the unrounded value of k≈0.051368 min−1k \approx 0.051368\text{ min}^{-1}: t1/2=ln⁡20.051368≈13.4938 mint_{1/2} = \frac{\ln 2}{0.051368} \approx 13.4938\text{ min}.

Final answer

k=0.0514 min−1k = 0.0514\text{ min}^{-1}, t1/2=13.49 mint_{1/2} = 13.49\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between absolute temperature T(t)T(t) and temperature excess T(t)−TmT(t) - T_m in cooling models.

  • Practice using the standard half-life formula t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k} directly whenever exponential decay to ambient is modeled.

Lock it in

Similar question

01

A cup of coffee cools from an initial temperature of 95.0∘C95.0^\circ\text{C} in a room at 20.0∘C20.0^\circ\text{C}. After 10.0 min10.0\text{ min}, its temperature is 65.0∘C65.0^\circ\text{C}. Find the decay constant kk (in min−1\text{min}^{-1}) rounded to four decimal places.

Answer

k≈0.0511 min−1k \approx 0.0511\text{ min}^{-1}. Key steps: Initial excess is 95.0−20.0=75.0∘C95.0 - 20.0 = 75.0^\circ\text{C}. Excess after 10 min10\text{ min} is 65.0−20.0=45.0∘C65.0 - 20.0 = 45.0^\circ\text{C}. Set 45.0=75.0e−10k45.0 = 75.0 e^{-10k}, giving e−10k=45.075.0=0.60e^{-10k} = \frac{45.0}{75.0} = 0.60. Solve k=−ln⁡(0.60)10≈0.05108 min−1k = -\frac{\ln(0.60)}{10} \approx 0.05108\text{ min}^{-1}.

02

A heated ceramic plate at 150.0∘C150.0^\circ\text{C} is placed in an ambient room at 25.0∘C25.0^\circ\text{C}. The cooling constant is k=0.0800 min−1k = 0.0800\text{ min}^{-1}. Determine the temperature of the plate after 15.0 min15.0\text{ min}, rounded to one decimal place.

Answer

T(15)≈62.6∘CT(15) \approx 62.6^\circ\text{C}. Key steps: Initial excess is 150.0−25.0=125.0∘C150.0 - 25.0 = 125.0^\circ\text{C}. Temperature excess after 15 min15\text{ min} is ΔT=125.0e−0.0800×15.0=125.0e−1.2≈125.0×0.301194≈37.65∘C\Delta T = 125.0 e^{-0.0800 \times 15.0} = 125.0 e^{-1.2} \approx 125.0 \times 0.301194 \approx 37.65^\circ\text{C}. Add ambient: T(15)=25.0+37.65≈62.6∘CT(15) = 25.0 + 37.65 \approx 62.6^\circ\text{C}.

03

A metal rod cools in a constant 18.0∘C18.0^\circ\text{C} environment. The half-life of its temperature excess is t1/2=8.50 mint_{1/2} = 8.50\text{ min}. If the rod is initially at 200.0∘C200.0^\circ\text{C}, how many minutes will it take for the rod to reach 40.0∘C40.0^\circ\text{C}? Round to two decimal places.

Answer

25.92 min25.92\text{ min}. Key steps: Initial excess is 200.0−18.0=182.0∘C200.0 - 18.0 = 182.0^\circ\text{C}. Target excess is 40.0−18.0=22.0∘C40.0 - 18.0 = 22.0^\circ\text{C}. Decay constant is k=ln⁡(2)8.50≈0.081547 min−1k = \frac{\ln(2)}{8.50} \approx 0.081547\text{ min}^{-1}. Set 182.0e−kt=22.0  ⟹  e−kt=22.0182.0  ⟹  t=−1kln⁡(22.0182.0)≈2.11300.081547≈25.92 min182.0 e^{-kt} = 22.0 \implies e^{-kt} = \frac{22.0}{182.0} \implies t = -\frac{1}{k}\ln\left(\frac{22.0}{182.0}\right) \approx \frac{2.1130}{0.081547} \approx 25.92\text{ min}.

Loading workspace…