Resources

A student solves the matrix equation AX=BA X = B for an invertible matrix AA and claims that the solution is given by X=BA−1X = B A^{-1}. Explain why matrix multiplication order creates a conceptual error in this claim. Then, given A=[1234]A = \begin{bmatrix} 1 & 2 \\ 3 & 4 \end{bmatrix} and B=[511]B = \begin{bmatrix} 5 \\ 11 \end{bmatrix}, evaluate the true solution X=A−1BX = A^{-1} B, and compute the product BTA−1B^T A^{-1} to demonstrate dimensional and algebraic consistency of left-multiplication.

Answer and steps

Final answer

Matrix multiplication is non-commutative and (2×1)×(2×2)(2 \times 1) \times (2 \times 2) is undefined for BA−1B A^{-1}; the true solution is X=A−1B=[12]X = A^{-1} B = \begin{bmatrix} 1 \\ 2 \end{bmatrix}, while BTA−1=[12]=XTB^T A^{-1} = \begin{bmatrix} 1 & 2 \end{bmatrix} = X^T

Steps

01

Conceptual Error in X=BA−1X = B A^{-1}

Matrix multiplication is generally non-commutative, meaning for two matrices MM and NN, MN≠NMM N \neq N M.

To isolate XX in the equation: AX=BA X = B we must multiply by A−1A^{-1} from the left (pre-multiplication) on both sides: A−1(AX)=A−1BA^{-1}(A X) = A^{-1} B (A−1A)X=A−1B(A^{-1} A) X = A^{-1} B IX=A−1B  ⟹  X=A−1BI X = A^{-1} B \implies X = A^{-1} B

If we instead post-multiply by A−1A^{-1}, we obtain: (AX)A−1=BA−1(A X) A^{-1} = B A^{-1} Because matrix multiplication is non-commutative, AXA−1A X A^{-1} cannot be simplified to (AA−1)X(A A^{-1}) X.

Furthermore, there is a dimensional mismatch:

  • AA is a 2×22 \times 2 matrix, so A−1A^{-1} is 2×22 \times 2.
  • BB is a 2×12 \times 1 column vector.
  • The product BA−1B A^{-1} attempts to multiply a (2×1)(2 \times 1) matrix by a (2×2)(2 \times 2) matrix. The inner dimensions (11 and 22) do not match, making BA−1B A^{-1} undefined.

02

Evaluating the True Solution X=A−1BX = A^{-1} B

Given: A=[1234],B=[511]A = \begin{bmatrix} 1 & 2 \\ 3 & 4 \end{bmatrix}, \quad B = \begin{bmatrix} 5 \\ 11 \end{bmatrix}

First, compute the determinant of AA: det⁡(A)=(1)(4)−(2)(3)=4−6=−2\det(A) = (1)(4) - (2)(3) = 4 - 6 = -2

Next, find A−1A^{-1} using the 2×22 \times 2 inverse formula: A−1=1det⁡(A)[4−2−31]=−12[4−2−31]=[−2132−12]A^{-1} = \frac{1}{\det(A)} \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} = -\frac{1}{2} \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} = \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix}

Now, compute X=A−1BX = A^{-1} B: X=[−2132−12][511]=[(−2)(5)+(1)(11)(32)(5)+(−12)(11)]=[−10+11152−112]=[12]X = \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} (-2)(5) + (1)(11) \\ \left(\frac{3}{2}\right)(5) + \left(-\frac{1}{2}\right)(11) \end{bmatrix} = \begin{bmatrix} -10 + 11 \\ \frac{15}{2} - \frac{11}{2} \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}


03

Dimensional and Algebraic Consistency

When transposing the original relationship to place the vector on the left: (AX)T=BT  ⟹  XTAT=BT(A X)^T = B^T \implies X^T A^T = B^T Multiplying both sides on the right by the inverse isolates the row vector XTX^T: XT=[12]X^T = \begin{bmatrix} 1 & 2 \end{bmatrix}

In transposed form, the product with the row vector BT=[511]B^T = \begin{bmatrix} 5 & 11 \end{bmatrix} (dimension 1×21 \times 2) and the inverse matrix (dimension 2×22 \times 2) is dimensionally valid: (1×2)×(2×2)=1×2(1 \times 2) \times (2 \times 2) = 1 \times 2 yielding: BTA−1=[12]=XTB^T A^{-1} = \begin{bmatrix} 1 & 2 \end{bmatrix} = X^T This confirms that the column vector BB must be multiplied from the left by A−1A^{-1} to yield the column vector XX, whereas placing the vector on the left requires the transposed row-vector formulation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats matrix multiplication as commutative and attempts to multiply B by A⁻¹, ignoring the incompatible inner dimensions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Matrix multiplication works like regular division ⟹ So AX=BA X = B means X=BA−1X = B A^{-1} ⟹ Order does not matter since AA and BB are just multiplied together.

    Correct

    Matrix multiplication is non-commutative (MN≠NMM N \neq N M). Multiplying AX=BA X = B on the left gives A−1(AX)=A−1B  ⟹  X=A−1BA^{-1}(A X) = A^{-1} B \implies X = A^{-1} B. The product BA−1B A^{-1} is undefined because the inner dimensions do not match: (2×1)×(2×2)(2 \times 1) \times (2 \times 2).

    You treated matrix multiplication as commutative like scalar multiplication. Because order matters for matrices, multiplying on the right produces AXA−1=BA−1A X A^{-1} = B A^{-1}, which does not isolate XX.

  2. Step 2

    det⁡(A)=4−6=−2  ⟹  A−1=[−211.5−0.5]\det(A) = 4 - 6 = -2 \implies A^{-1} = \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix}

  3. Step 3

    X=BA−1=[511][−211.5−0.5]=[(5)(−2)+(5)(1)(11)(1.5)+(11)(−0.5)]=[−511]X = B A^{-1} = \begin{bmatrix} 5 \\ 11 \end{bmatrix} \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} = \begin{bmatrix} (5)(-2) + (5)(1) \\ (11)(1.5) + (11)(-0.5) \end{bmatrix} = \begin{bmatrix} -5 \\ 11 \end{bmatrix}

    Correct

    X=A−1B=[−211.5−0.5][511]=[−10+117.5−5.5]=[12]X = A^{-1} B = \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} -10 + 11 \\ 7.5 - 5.5 \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}

    You attempted to compute BA−1B A^{-1}, but a 2×12 \times 1 matrix cannot multiply a 2×22 \times 2 matrix because the inner dimensions (11 and 22) do not match. Evaluating the true solution requires left-multiplication: X=A−1BX = A^{-1} B.

  4. Step 4

    BT=[5,11]  ⟹  BTA−1=[5,11][−211.5−0.5]=[(5)(−2)+(11)(1.5),(5)(1)+(11)(−0.5)]=[6.5,−0.5]B^T = [5, 11] \implies B^T A^{-1} = [5, 11] \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} = [(5)(-2) + (11)(1.5), (5)(1) + (11)(-0.5)] = [6.5, -0.5]

WHAT YOU DID WELL
Compliments from Your Teacher

You found the correct determinant and inverse matrix for AA.

You correctly formed the transpose BTB^T and performed valid row-by-column multiplication for BTA−1B^T A^{-1}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Non-commutative matrix multiplication & dimensional mismatch

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that matrix multiplication behaves like scalar division where order does not matter, leading you to post-multiply by A−1A^{-1} (BA−1B A^{-1}) instead of pre-multiplying (A−1BA^{-1} B) and forcing an invalid multiplication between incompatible dimensions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Preserve Multiplication Side
  • If AX=BA X = B, multiplying from the left gives A−1AX=A−1B  ⟹  X=A−1BA^{-1} A X = A^{-1} B \implies X = A^{-1} B.

  • Always apply the inverse to the exact same side (left or right) of both sides of the equation.

Inner Dimensions Compatibility
  • A product (m×n)×(p×q)(m \times n) \times (p \times q) is only defined when n=pn = p, resulting in an m×qm \times q matrix.

  • Check the dimensions before multiplying: BB is 2×12 \times 1 and A−1A^{-1} is 2×22 \times 2, so BA−1B A^{-1} has mismatched inner dimensions (1≠21 \neq 2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the isolation step correctly by multiplying both sides on the left by A−1A^{-1}: A−1(AX)=A−1B  ⟹  X=A−1BA^{-1}(A X) = A^{-1} B \implies X = A^{-1} B.

  2. Substitute A−1=[−211.5−0.5]A^{-1} = \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} and B=[511]B = \begin{bmatrix} 5 \\ 11 \end{bmatrix}.

  3. Multiply row by column: X=[(−2)(5)+(1)(11)(1.5)(5)+(−0.5)(11)]=[−10+117.5−5.5]=[12]X = \begin{bmatrix} (-2)(5) + (1)(11) \\ (1.5)(5) + (-0.5)(11) \end{bmatrix} = \begin{bmatrix} -10 + 11 \\ 7.5 - 5.5 \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}.

Final answer

X=[12]X = \begin{bmatrix} 1 \\ 2 \end{bmatrix}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the rule of matrix non-commutativity: MN≠NMM N \neq N M in general.

  • Practice checking matrix inner dimensions before performing any product.

  • Complete the targeted flashcards and practice problems below to master solving matrix equations.

OverviewACEpath Teacher's Diagnosis

02 The student miscalculates the 2×2 matrix inverse by forgetting to divide the adjugate matrix by the determinant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Matrix multiplication is not commutative so A−1A^{-1} must be multiplied from the left. Multiplying on the right gives (AX)A−1(AX)A^{-1} which does not equal XX, and BA−1BA^{-1} cannot be multiplied because dimensions 2×12 \times 1 and 2×22 \times 2 do not match.

  2. Step 2

    det⁡(A)=1(4)−2(3)=−2\det(A) = 1(4) - 2(3) = -2

  3. Step 3

    A−1=[4−2−31]A^{-1} = \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix}

    Correct

    A−1=1det⁡(A)[d−b−ca]=−12[4−2−31]=[−2132−12]A^{-1} = \frac{1}{\det(A)} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix} = -\frac{1}{2} \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} = \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix}

    You found the adjugate matrix correctly, but you forgot to multiply by the scalar factor 1det⁡(A)=−12\frac{1}{\det(A)} = -\frac{1}{2}.

  4. Step 4

    X=A−1B=[4−2−31][511]=[(4)(5)+(−2)(11)(−3)(5)+(1)(11)]=[−2−4]X = A^{-1}B = \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} (4)(5) + (-2)(11) \\ (-3)(5) + (1)(11) \end{bmatrix} = \begin{bmatrix} -2 \\ -4 \end{bmatrix}

    Correct

    X=A−1B=[−2132−12][511]=[12]X = A^{-1}B = \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}

    Your matrix-vector multiplication procedure was executed cleanly, but your result was scaled by −2-2 due to the missing 1det⁡(A)\frac{1}{\det(A)} factor.

  5. Step 5

    BT=[5,11]  ⟹  BTA−1=[5,11][4−2−31]=[(5)(4)+(11)(−3),(5)(−2)+(11)(1)]=[−13,1]B^T = [5, 11] \implies B^T A^{-1} = [5, 11] \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} = [(5)(4) + (11)(-3), (5)(-2) + (11)(1)] = [-13, 1]

    Correct

    BTA−1=[511][−2132−12]=[132−12]B^T A^{-1} = \begin{bmatrix} 5 & 11 \end{bmatrix} \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix} = \begin{bmatrix} \frac{13}{2} & -\frac{1}{2} \end{bmatrix}

    You correctly took the transpose of BB and followed proper row-vector multiplication, but the numerical entries were affected by using the unscaled adjugate matrix instead of A−1A^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated why matrix multiplication requires pre-multiplication to isolate XX.

You correctly identified the dimensional mismatch in the product BA−1BA^{-1}.

You computed the determinant det⁡(A)=−2\det(A) = -2 without error.

You formed the adjugate matrix [4−2−31]\begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} using the correct diagonal swap and sign changes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Determinant Scalar in Inverse

You calculated det⁡(A)=−2\det(A) = -2 at the start, but omitted the scalar 1det⁡(A)\frac{1}{\det(A)} when assembling A−1A^{-1}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the adjugate matrix with the actual matrix inverse by skipping the final scalar multiplication step A−1=1det⁡(A)adj⁡(A)A^{-1} = \frac{1}{\det(A)} \operatorname{adj}(A).

REASONING PATH
Your ACEpath teacher’s suggested approach
Full Inverse Formula
  • For any invertible 2×22 \times 2 matrix A=[abcd]A = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, the inverse is A−1=1ad−bc[d−b−ca]A^{-1} = \frac{1}{ad - bc} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}.

  • Always write down 1det⁡(A)\frac{1}{\det(A)} in front of the adjugate matrix before computing products.

Quick Verification
  • The product of a matrix and its inverse must equal the identity matrix: AA−1=IA A^{-1} = I.

  • Multiply your candidate inverse by the top-left entry of AA: (1)(4)+(2)(−3)=−2≠1(1)(4) + (2)(-3) = -2 \neq 1, which immediately alerts you that division by −2-2 is still needed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the adjugate matrix by −12-\frac{1}{2}: A−1=−12[4−2−31]=[−2132−12]A^{-1} = -\frac{1}{2} \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} = \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix}.

  2. Compute X=A−1B=[−2132−12][511]=[−10+11152−112]=[12]X = A^{-1}B = \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} -10 + 11 \\ \frac{15}{2} - \frac{11}{2} \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}.

  3. Compute BTA−1=[511][−2132−12]=[−10+3325−112]=[132−12]B^T A^{-1} = \begin{bmatrix} 5 & 11 \end{bmatrix} \begin{bmatrix} -2 & 1 \\ \frac{3}{2} & -\frac{1}{2} \end{bmatrix} = \begin{bmatrix} -10 + \frac{33}{2} & 5 - \frac{11}{2} \end{bmatrix} = \begin{bmatrix} \frac{13}{2} & -\frac{1}{2} \end{bmatrix}.

Final answer

X=[12]X = \begin{bmatrix} 1 \\ 2 \end{bmatrix} and BTA−1=[132−12]B^T A^{-1} = \begin{bmatrix} \frac{13}{2} & -\frac{1}{2} \end{bmatrix}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full formula A−1=1det⁡(A)adj⁡(A)A^{-1} = \frac{1}{\det(A)} \operatorname{adj}(A) as an explicit placeholder step in every inverse problem.

  • Perform a 5-second mental check on the first entry: test if the first row of AA times the first column of your A−1A^{-1} yields 11.

OverviewACEpath Teacher's Diagnosis

03 The student confuses transposition when forming the adjugate matrix or negates the wrong entries, negating the main diagonal instead of the off-diagonal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Left multiplication by A−1A^{-1} gives A−1AX=A−1B  ⟹  X=A−1BA^{-1}AX = A^{-1}B \implies X = A^{-1}B. Multiplying from the right gives BA−1BA^{-1}, which is invalid because matrix multiplication is non-commutative and the inner dimensions do not match.

  2. Step 2

    det⁡(A)=4−6=−2  ⟹  A−1=1−2[−123−4]=[0.5−1−1.52]\det(A) = 4 - 6 = -2 \implies A^{-1} = \frac{1}{-2} \begin{bmatrix} -1 & 2 \\ 3 & -4 \end{bmatrix} = \begin{bmatrix} 0.5 & -1 \\ -1.5 & 2 \end{bmatrix}

    Correct

    det⁡(A)=−2  ⟹  A−1=1−2[4−2−31]=[−211.5−0.5]\det(A) = -2 \implies A^{-1} = \frac{1}{-2} \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix} = \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix}

    You found det⁡(A)=−2\det(A) = -2 correctly, but when constructing the adjugate of a 2×22 \times 2 matrix, you must swap the main diagonal entries (11 and 44) and negate the off-diagonal entries (22 and 33). Instead, you negated the main diagonal and left the off-diagonal entries positive.

  3. Step 3

    X=A−1B=[0.5−1−1.52][511]=[−8.514.5]X = A^{-1}B = \begin{bmatrix} 0.5 & -1 \\ -1.5 & 2 \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} -8.5 \\ 14.5 \end{bmatrix}

    Correct

    X=A−1B=[−211.5−0.5][511]=[12]X = A^{-1}B = \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} \begin{bmatrix} 5 \\ 11 \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}

    Your multiplication arithmetic was carried out correctly, but the result is affected by your incorrect inverse matrix.

  4. Step 4

    BTA−1=[511][0.5−1−1.52]=[−1417]B^T A^{-1} = \begin{bmatrix} 5 & 11 \end{bmatrix} \begin{bmatrix} 0.5 & -1 \\ -1.5 & 2 \end{bmatrix} = \begin{bmatrix} -14 & 17 \end{bmatrix}

    Correct

    BTA−1=[511][−211.5−0.5]=[12]B^T A^{-1} = \begin{bmatrix} 5 & 11 \end{bmatrix} \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} = \begin{bmatrix} 1 & 2 \end{bmatrix}

    Your matrix multiplication method was set up and calculated correctly according to the dimensions, but the values reflect the error in A−1A^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly justified why isolating XX requires pre-multiplication by A−1A^{-1} rather than post-multiplication.

You accurately identified that the product BA−1B A^{-1} has incompatible inner dimensions.

You evaluated the determinant det⁡(A)=−2\det(A) = -2 accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Adjugate matrix inversion error

You negated the diagonal entries instead of swapping them, and left the off-diagonal entries positive instead of negating them.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion over the 2×22 \times 2 matrix inversion shortcut rule: for M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, the adjugate is [d−b−ca]\begin{bmatrix} d & -b \\ -c & a \end{bmatrix}, meaning the main diagonal entries swap positions while the off-diagonal entries change signs.

REASONING PATH
Your ACEpath teacher’s suggested approach
2x2 Matrix Inverse Recipe
  • [abcd]−1=1ad−bc[d−b−ca]\begin{bmatrix} a & b \\ c & d \end{bmatrix}^{-1} = \frac{1}{ad - bc} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}

  • Always remember: swap the main diagonal (a↔da \leftrightarrow d), negate the off-diagonal (−b,−c-b, -c), and multiply by 1det⁡\frac{1}{\det}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the correct adjugate matrix: adj(A)=[4−2−31]\text{adj}(A) = \begin{bmatrix} 4 & -2 \\ -3 & 1 \end{bmatrix}.

  2. Multiply by 1det⁡(A)=−12\frac{1}{\det(A)} = -\frac{1}{2}: A−1=[−211.5−0.5]A^{-1} = \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix}.

  3. Compute X=A−1B=[−2(5)+1(11)1.5(5)−0.5(11)]=[12]X = A^{-1}B = \begin{bmatrix} -2(5) + 1(11) \\ 1.5(5) - 0.5(11) \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}.

  4. Compute BTA−1=[511][−211.5−0.5]=[12]B^T A^{-1} = \begin{bmatrix} 5 & 11 \end{bmatrix} \begin{bmatrix} -2 & 1 \\ 1.5 & -0.5 \end{bmatrix} = \begin{bmatrix} 1 & 2 \end{bmatrix}.

Final answer

X=[12]X = \begin{bmatrix} 1 \\ 2 \end{bmatrix} and BTA−1=[12]B^T A^{-1} = \begin{bmatrix} 1 & 2 \end{bmatrix}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the 2×22 \times 2 inverse formula by highlighting the diagonal swap versus the off-diagonal negation.

  • Verify your computed inverse satisfies AA−1=IA A^{-1} = I before using it in further vector multiplications.

Lock it in

Similar question

01

Solve for the vector XX in the matrix equation AX=BA X = B, where A=[2153]A = \begin{bmatrix} 2 & 1 \\ 5 & 3 \end{bmatrix} and B=[411]B = \begin{bmatrix} 4 \\ 11 \end{bmatrix}.

Answer

First find A−1A^{-1}: det⁡(A)=6−5=1\det(A) = 6 - 5 = 1, so A−1=[3−1−52]A^{-1} = \begin{bmatrix} 3 & -1 \\ -5 & 2 \end{bmatrix}. Pre-multiply BB by A−1A^{-1}: X=A−1B=[3−1−52][411]=[12−11−20+22]=[12]X = A^{-1} B = \begin{bmatrix} 3 & -1 \\ -5 & 2 \end{bmatrix} \begin{bmatrix} 4 \\ 11 \end{bmatrix} = \begin{bmatrix} 12 - 11 \\ -20 + 22 \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}.

02

Let PP be a 3×33 \times 3 matrix and QQ be a 3×23 \times 2 matrix. State whether P−1QP^{-1} Q and QP−1Q P^{-1} are defined, giving their resulting dimensions if defined.

Answer

P−1QP^{-1} Q is defined because (3×3)×(3×2)(3 \times 3) \times (3 \times 2) has matching inner dimensions (3=33 = 3); the result is a 3×23 \times 2 matrix. QP−1Q P^{-1} is undefined because (3×2)×(3×3)(3 \times 2) \times (3 \times 3) has mismatched inner dimensions (2≠32 \neq 3).

03

Given invertible 2×22 \times 2 matrices MM and NN, solve for the matrix XX in MXN=CM X N = C.

Answer

Multiply on the left by M−1M^{-1}: XN=M−1CX N = M^{-1} C. Then multiply on the right by N−1N^{-1}: X=M−1CN−1X = M^{-1} C N^{-1}. Both multiplication sides must be strictly maintained.

Loading workspace…