Resources

A damped harmonic oscillator is governed by the displacement function x(t)=0.750e−0.200tcos⁡(4.00t)x(t) = 0.750 e^{-0.200 t} \cos(4.00 t), where tt is measured in seconds (s\text{s}) and xx is in meters (m\text{m}). Find the instantaneous velocity function v(t)=dxdtv(t) = \frac{dx}{dt} with explicit units, evaluate the exact instantaneous velocity at t=0 st = 0\text{ s}, and write the state domain of time tt for this decaying system using standard interval notation.

Answer and steps

Final answer

v(t)=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = e^{-0.200 t} [-0.150 \cos(4.00 t) - 3.00 \sin(4.00 t)]\text{ m/s}; v(0)=−0.150 m/sv(0) = -0.150\text{ m/s}; domain: t∈[0,∞) st \in [0, \infty)\text{ s}](streamdown:incomplete-link)

Steps

01

Differentiate the displacement function using the Product Rule

The position of the damped oscillator is given by: x(t)=0.750e−0.200tcos⁡(4.00t) mx(t) = 0.750 e^{-0.200 t} \cos(4.00 t)\text{ m}

To find the velocity v(t)=dxdtv(t) = \frac{dx}{dt}, apply the product rule, ddt[u⋅w]=u′w+uw′\frac{d}{dt}[u \cdot w] = u'w + uw', by separating the function into two parts:

  • Let u(t)=0.750e−0.200tu(t) = 0.750 e^{-0.200 t}
  • Let w(t)=cos⁡(4.00t)w(t) = \cos(4.00 t)

Differentiate each part with respect to tt using the chain rule: u′(t)=0.750⋅(−0.200)e−0.200t=−0.150e−0.200tu'(t) = 0.750 \cdot (-0.200) e^{-0.200 t} = -0.150 e^{-0.200 t} w′(t)=−sin⁡(4.00t)⋅4.00=−4.00sin⁡(4.00t)w'(t) = -\sin(4.00 t) \cdot 4.00 = -4.00 \sin(4.00 t)

Now combine the derivatives: v(t)=u′(t)w(t)+u(t)w′(t)v(t) = u'(t)w(t) + u(t)w'(t) v(t)=(−0.150e−0.200t)cos⁡(4.00t)+(0.750e−0.200t)(−4.00sin⁡(4.00t))v(t) = \left(-0.150 e^{-0.200 t}\right)\cos(4.00 t) + \left(0.750 e^{-0.200 t}\right)\left(-4.00 \sin(4.00 t)\right) v(t)=−0.150e−0.200tcos⁡(4.00t)−3.00e−0.200tsin⁡(4.00t)v(t) = -0.150 e^{-0.200 t} \cos(4.00 t) - 3.00 e^{-0.200 t} \sin(4.00 t)

Factoring out the common exponential term e−0.200te^{-0.200 t} and appending the appropriate physical unit for velocity (m/s\text{m/s}): v(t)=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = e^{-0.200 t} [-0.150 \cos(4.00 t) - 3.00 \sin(4.00 t)]\text{ m/s}

Common Pitfall: Forgetting to apply the chain rule to the angular frequency (4.004.00) or to the decay constant (−0.200-0.200) will lead to an incorrect amplitude for the velocity terms.


02

Evaluate the instantaneous velocity at t=0 st = 0\text{ s}

Substitute t=0t = 0 into the velocity function: v(0)=e−0.200(0)[−0.150cos⁡(0)−3.00sin⁡(0)] m/sv(0) = e^{-0.200(0)} [-0.150 \cos(0) - 3.00 \sin(0)]\text{ m/s}

Since e0=1e^0 = 1, cos⁡(0)=1\cos(0) = 1, and sin⁡(0)=0\sin(0) = 0: v(0)=1⋅[−0.150(1)−3.00(0)] m/s=−0.150 m/sv(0) = 1 \cdot [-0.150(1) - 3.00(0)]\text{ m/s} = -0.150\text{ m/s}

The negative sign indicates that the oscillator is initially moving in the negative xx-direction at t=0 st = 0\text{ s}.


03

Determine the domain of the physical system

In physical modeling of damped harmonic motion, the motion initiates at a defined starting moment, typically t=0 st = 0\text{ s}, and continues indefinitely forward in time as energy dissipates.

Expressed in standard interval notation with explicit units, the valid state domain is: t∈[0,∞) st \in [0, \infty)\text{ s}](streamdown:incomplete-link)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student differentiates the exponential and trigonometric factors independently and multiplies their derivatives, failing to apply the product rule.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(t)=(ddt[0.750e−0.200t])⋅(ddt[cos⁡(4.00t)])  ⟹  v(t)=(−0.150e−0.200t)⋅(−4.00sin⁡(4.00t))  ⟹  v(t)=0.600e−0.200tsin⁡(4.00t) m/sv(t) = \left(\frac{d}{dt}[0.750 e^{-0.200t}]\right) \cdot \left(\frac{d}{dt}[\cos(4.00t)]\right) \implies v(t) = (-0.150 e^{-0.200t}) \cdot (-4.00 \sin(4.00t)) \implies v(t) = 0.600 e^{-0.200t} \sin(4.00t)\text{ m/s}

    Correct

    v(t)=ddt[0.750e−0.200t]cos⁡(4.00t)+0.750e−0.200tddt[cos⁡(4.00t)]=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = \frac{d}{dt}[0.750 e^{-0.200t}]\cos(4.00t) + 0.750 e^{-0.200t}\frac{d}{dt}[\cos(4.00t)] = e^{-0.200t}[-0.150 \cos(4.00t) - 3.00 \sin(4.00t)]\text{ m/s}

    You correctly differentiated each individual factor using the chain rule, but you multiplied their derivatives together. The derivative of a product u(t)w(t)u(t)w(t) requires the product rule: ddt[uw]=u′w+uw′\frac{d}{dt}[uw] = u'w + uw', not u′w′u'w'.

  2. Step 2

    v(0)=0.600e0sin⁡(0)  ⟹  v(0)=0 m/sv(0) = 0.600 e^0 \sin(0) \implies v(0) = 0\text{ m/s}

    Correct

    v(0)=e0[−0.150cos⁡(0)−3.00sin⁡(0)]=−0.150 m/sv(0) = e^0[-0.150 \cos(0) - 3.00 \sin(0)] = -0.150\text{ m/s}

    Your arithmetic evaluating v(0)v(0) was completely consistent with your differentiated function, but the result is incorrect due to the missing product rule term from Step 1.

  3. Step 3

    [0,∞)[0, \infty)](streamdown:incomplete-link)

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the derivative of the exponential factor using the chain rule.

You correctly computed the derivative of the cosine factor using the chain rule.

You successfully evaluated your velocity function at t=0 st = 0\text{ s} and identified the correct non-negative domain for the oscillator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Product Rule Omission

No, this is a conceptual misunderstanding of how to differentiate the product of two functions rather than a simple calculation oversight.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the derivative of a product of functions equals the product of their derivatives, ddt[u⋅w]=u′⋅w′\frac{d}{dt}[u \cdot w] = u' \cdot w', forgetting to apply the product rule (uw)′=u′w+uw′(uw)' = u'w + uw'.

REASONING PATH
Your ACEpath teacher’s suggested approach
Product Rule Formulation
  • ddt[u(t)⋅w(t)]=u′(t)w(t)+u(t)w′(t)\frac{d}{dt}[u(t) \cdot w(t)] = u'(t)w(t) + u(t)w'(t)

  • Always write out the two separate terms u′wu'w and uw′uw' before computing individual derivatives.

Initial Velocity Check
  • At t=0t = 0, x′(0)=u′(0)w(0)+u(0)w′(0)x'(0) = u'(0)w(0) + u(0)w'(0)

  • Verify that terms containing cos⁡(0)=1\cos(0) = 1 do not vanish at t=0t = 0 unless their coefficient is zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the product rule: v(t)=ddt[0.750e−0.200t]cos⁡(4.00t)+0.750e−0.200tddt[cos⁡(4.00t)]v(t) = \frac{d}{dt}\left[0.750 e^{-0.200t}\right] \cos(4.00t) + 0.750 e^{-0.200t} \frac{d}{dt}\left[\cos(4.00t)\right]

  2. Substitute the chain rule derivatives into the product rule: v(t)=(−0.150e−0.200t)cos⁡(4.00t)+(0.750e−0.200t)(−4.00sin⁡(4.00t))v(t) = (-0.150 e^{-0.200t})\cos(4.00t) + (0.750 e^{-0.200t})(-4.00 \sin(4.00t))

  3. Factor out e−0.200te^{-0.200t} and attach units: v(t)=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = e^{-0.200t}[-0.150 \cos(4.00t) - 3.00 \sin(4.00t)]\text{ m/s}

  4. Evaluate at t=0 st = 0\text{ s}: v(0)=e0[−0.150(1)−3.00(0)]=−0.150 m/sv(0) = e^0[-0.150(1) - 3.00(0)] = -0.150\text{ m/s}

Final answer

v(t)=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = e^{-0.200t}[-0.150 \cos(4.00t) - 3.00 \sin(4.00t)]\text{ m/s}; v(0)=−0.150 m/sv(0) = -0.150\text{ m/s}; domain: t∈[0,∞) st \in [0, \infty)\text{ s}](streamdown:incomplete-link)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the product rule identity ddt[f⋅g]=f′g+fg′\frac{d}{dt}[f \cdot g] = f'g + fg' and contrast it with the false assumption (fg)′=f′g′(fg)' = f'g'.

  • Practice differentiating mixed products of exponential and trigonometric functions.

  • Always perform a quick sanity check at t=0t = 0 to ensure terms with non-zero initial values are preserved.

OverviewACEpath Teacher's Diagnosis

02 The student omits the inner derivative of 4.00t when differentiating cos(4.00t), forgetting the chain rule on the trigonometric factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=−0.150e−0.200tcos⁡(4.00t)+0.750e−0.200t(−sin⁡(4.00t))  ⟹  v(t)=−0.150e−0.200tcos⁡(4.00t)−0.750e−0.200tsin⁡(4.00t) m/sv(t) = -0.150 e^{-0.200t} \cos(4.00t) + 0.750 e^{-0.200t}(-\sin(4.00t)) \implies v(t) = -0.150 e^{-0.200t} \cos(4.00t) - 0.750 e^{-0.200t} \sin(4.00t)\text{ m/s}

    Correct

    v(t)=−0.150e−0.200tcos⁡(4.00t)−3.00e−0.200tsin⁡(4.00t) m/sv(t) = -0.150 e^{-0.200t} \cos(4.00t) - 3.00 e^{-0.200t} \sin(4.00t)\text{ m/s}

    When differentiating cos⁡(4.00t)\cos(4.00t) with respect to tt, the chain rule requires multiplying by the derivative of the inside function, ddt(4.00t)=4.00\frac{d}{dt}(4.00t) = 4.00. This gives ddt[cos⁡(4.00t)]=−4.00sin⁡(4.00t)\frac{d}{dt}[\cos(4.00t)] = -4.00\sin(4.00t), resulting in a second term coefficient of 0.750⋅(−4.00)=−3.000.750 \cdot (-4.00) = -3.00 rather than −0.750-0.750.

  2. Step 2

    v(0)=−0.150(1)(1)−0.750(1)(0)  ⟹  v(0)=−0.150 m/sv(0) = -0.150(1)(1) - 0.750(1)(0) \implies v(0) = -0.150\text{ m/s}

  3. Step 3

    [0,∞)[0, \infty)](streamdown:incomplete-link)

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly structured the overall derivative using the product rule.

You successfully applied the chain rule to the exponential component e−0.200te^{-0.200t}.

You evaluated v(0)v(0) accurately with the correct physical units.

You identified the proper non-negative time interval [0,∞)[0, \infty) for the decaying oscillator.](streamdown:incomplete-link)

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Chain Rule Omission

You differentiated cos⁡(4.00t)\cos(4.00t) as −sin⁡(4.00t)-\sin(4.00t) without multiplying by the inner derivative of 4.00t4.00t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete application of the chain rule to composite trigonometric functions cos⁡(ωt)\cos(\omega t) where the angular frequency ω≠1\omega \neq 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiating composite trigonometric terms
  • ddt[cos⁡(kt)]=−ksin⁡(kt)\frac{d}{dt}[\cos(k t)] = -k \sin(k t)

  • Always identify the inner argument u(t)=ktu(t) = kt and multiply the outer derivative by u′(t)=ku'(t) = k before combining terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate w(t)=cos⁡(4.00t)w(t) = \cos(4.00t) using the chain rule: w′(t)=−sin⁡(4.00t)⋅4.00=−4.00sin⁡(4.00t)w'(t) = -\sin(4.00t) \cdot 4.00 = -4.00\sin(4.00t).

  2. Multiply by u(t)=0.750e−0.200tu(t) = 0.750 e^{-0.200t} to obtain the second product rule term: 0.750e−0.200t⋅(−4.00sin⁡(4.00t))=−3.00e−0.200tsin⁡(4.00t)0.750 e^{-0.200t} \cdot (-4.00\sin(4.00t)) = -3.00 e^{-0.200t} \sin(4.00t).

  3. Combine with the first product rule term and attach units: v(t)=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = e^{-0.200t}[-0.150\cos(4.00t) - 3.00\sin(4.00t)]\text{ m/s}.

Final answer

v(t)=e−0.200t[−0.150cos⁡(4.00t)−3.00sin⁡(4.00t)] m/sv(t) = e^{-0.200 t} [-0.150 \cos(4.00 t) - 3.00 \sin(4.00 t)]\text{ m/s}; v(0)=−0.150 m/sv(0) = -0.150\text{ m/s}; domain: t∈[0,∞) st \in [0, \infty)\text{ s}](streamdown:incomplete-link)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice composite trigonometric derivatives where the angular frequency ω>1\omega > 1.

  • Explicitly write down u′(t)u'(t) and w′(t)w'(t) side by side before assembling product rule expressions.

OverviewACEpath Teacher's Diagnosis

03 The student states the domain as open on the left boundary, mistakenly assuming that the initial state at t = 0 cannot be included in the interval.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=−0.150e−0.200tcos⁡(4.00t)−3.00e−0.200tsin⁡(4.00t) m/sv(t) = -0.150 e^{-0.200t} \cos(4.00t) - 3.00 e^{-0.200t} \sin(4.00t)\text{ m/s}

  2. Step 2

    v(0)=−0.150(1)−3.00(0)  ⟹  v(0)=−0.150 m/sv(0) = -0.150(1) - 3.00(0) \implies v(0) = -0.150\text{ m/s}

  3. Step 3

    (0,∞)(0, \infty)

    Correct

    t∈[0,∞) st \in [0, \infty)\text{ s}](streamdown:incomplete-link)

    The physical process begins at the initial state t=0 st = 0\text{ s}, where both position and velocity are well-defined. Therefore, the boundary at t=0t = 0 must be closed with a square bracket, [0,∞)[0, \infty), rather than an open parenthesis.](streamdown:incomplete-link)

WHAT YOU DID WELL
Compliments from Your Teacher

You applied the product rule and chain rule accurately to obtain the velocity function.

You included explicit physical units for both the velocity function and the evaluated initial velocity.

You evaluated v(0)v(0) correctly using the trigonometric values cos⁡(0)=1\cos(0) = 1 and sin⁡(0)=0\sin(0) = 0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Open versus closed boundary in physical domain

You used an open parenthesis at the lower bound instead of a square bracket.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated t=0 st = 0\text{ s} as an excluded limit rather than an included initial state where the system's position and velocity are physically defined.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate initial state validity
  • If a physical model is valid and defined at the starting moment t=0t = 0, that boundary point must be included.

  • Check whether x(0)x(0) and v(0)v(0) yield finite, physically meaningful values; if they do, use a square bracket [[.](streamdown:incomplete-link)

Include variable and units in domain specifications
  • Physical domains should state the variable being bounded and its associated unit of measurement.

  • Write the complete domain as t∈[0,∞) st \in [0, \infty)\text{ s} rather than a bare interval.](streamdown:incomplete-link)

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify whether t=0 st = 0\text{ s} is part of the system's motion: since x(0)=0.750 mx(0) = 0.750\text{ m} and v(0)=−0.150 m/sv(0) = -0.150\text{ m/s} are well-defined initial conditions, t=0t = 0 is included.

  2. Write the interval including the left endpoint and extending to positive infinity: [0,∞)[0, \infty).](streamdown:incomplete-link)

  3. Attach the variable and unit to form the complete physical domain: t∈[0,∞) st \in [0, \infty)\text{ s}.](streamdown:incomplete-link)

Final answer

t∈[0,∞) st \in [0, \infty)\text{ s}](streamdown:incomplete-link)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review interval notation rules: square brackets [ ][\,] denote inclusive endpoints, while parentheses ( )(\,) denote strict inequalities or unbounded limits.

  • Whenever stating a physical domain, test whether the initial condition t=0t = 0 is physically meaningful and mathematically defined.

  • Practice specifying the variable symbol and physical units alongside the interval.

Lock it in

Similar question

01

A particle's displacement is given by s(t)=t2e−3t ms(t) = t^2 e^{-3t}\text{ m} for t≥0 st \ge 0\text{ s}. Find the velocity function v(t)=dsdtv(t) = \frac{ds}{dt} and evaluate v(1 s)v(1\text{ s}).

Answer

By the product rule, v(t)=ddt[t2]e−3t+t2ddt[e−3t]=2te−3t−3t2e−3t=t(2−3t)e−3t m/sv(t) = \frac{d}{dt}[t^2] e^{-3t} + t^2 \frac{d}{dt}[e^{-3t}] = 2t e^{-3t} - 3t^2 e^{-3t} = t(2 - 3t)e^{-3t}\text{ m/s}. At t=1 st = 1\text{ s}, v(1)=1(2−3)e−3=−e−3 m/s≈−0.0498 m/sv(1) = 1(2 - 3)e^{-3} = -e^{-3}\text{ m/s} \approx -0.0498\text{ m/s}.

02

An electrical charge oscillation is modeled by q(t)=2.0e−5.0tsin⁡(10t) Cq(t) = 2.0 e^{-5.0 t} \sin(10 t)\text{ C} for t∈[0,∞) st \in [0, \infty)\text{ s}. Determine the instantaneous electric current i(t)=dqdti(t) = \frac{dq}{dt} with explicit units and find i(0 s)i(0\text{ s}).](streamdown:incomplete-link)

Answer

Applying the product rule: i(t)=ddt[2.0e−5.0t]sin⁡(10t)+2.0e−5.0tddt[sin⁡(10t)]=−10e−5.0tsin⁡(10t)+20e−5.0tcos⁡(10t)=e−5.0t[−10sin⁡(10t)+20cos⁡(10t)] Ai(t) = \frac{d}{dt}[2.0 e^{-5.0t}] \sin(10t) + 2.0 e^{-5.0t} \frac{d}{dt}[\sin(10t)] = -10 e^{-5.0t} \sin(10t) + 20 e^{-5.0t} \cos(10t) = e^{-5.0t}[-10 \sin(10t) + 20 \cos(10t)]\text{ A}. Evaluating at t=0 st = 0\text{ s}: i(0)=e0[−10(0)+20(1)]=20 Ai(0) = e^0[-10(0) + 20(1)] = 20\text{ A}.

03

A damped oscillator has position x(t)=Ae−γtcos⁡(ωt+ϕ)x(t) = A e^{-\gamma t} \cos(\omega t + \phi). Write out the general symbolic expression for its velocity v(t)=dxdtv(t) = \frac{dx}{dt} using the product and chain rules, and express the condition for the oscillator to be momentarily stationary at t=0t = 0.

Answer

Using the product rule: v(t)=−γAe−γtcos⁡(ωt+ϕ)−ωAe−γtsin⁡(ωt+ϕ)=−Ae−γt[γcos⁡(ωt+ϕ)+ωsin⁡(ωt+ϕ)]v(t) = -\gamma A e^{-\gamma t} \cos(\omega t + \phi) - \omega A e^{-\gamma t} \sin(\omega t + \phi) = -A e^{-\gamma t} [\gamma \cos(\omega t + \phi) + \omega \sin(\omega t + \phi)]. At t=0t = 0, v(0)=0  ⟹  γcos⁡(ϕ)+ωsin⁡(ϕ)=0v(0) = 0 \implies \gamma \cos(\phi) + \omega \sin(\phi) = 0, which yields tan⁡(ϕ)=−γω\tan(\phi) = -\frac{\gamma}{\omega}.

Loading workspace…