Resources

Let R90R_{90} denote a counterclockwise rotation of 90∘90^\circ about the origin, and let rxr_x denote a reflection across the xx-axis. A student evaluates the composite transformation T=rx∘R90T = r_x \circ R_{90} on the point P(3,−5)P(3, -5), but accidentally applies the transformations in the reverse order, computing S(P)=(R90∘rx)(P)S(P) = (R_{90} \circ r_x)(P). Determine the actual resulting coordinates of T(P)T(P), the erroneous coordinates S(P)S(P), and the vector displacement d⃗=S(P)−T(P)\vec{d} = S(P) - T(P) caused by this non-commutative order error.

Answer and steps

Final answer

T(P)=(5,−3)T(P) = (5, -3), S(P)=(−5,3)S(P) = (-5, 3), and d⃗=⟨−10,6⟩\vec{d} = \langle -10, 6 \rangle

Steps

01

Recall the Coordinate Rules

To evaluate composite transformations, remember that function composition (f∘g)(P)(f \circ g)(P) means applying the inner transformation gg first, followed by the outer transformation ff.

  • 90∘90^\circ Counterclockwise Rotation about the Origin (R90R_{90}): R90(x,y)=(−y,x)R_{90}(x, y) = (-y, x)
  • Reflection across the xx-axis (rxr_x): rx(x,y)=(x,−y)r_x(x, y) = (x, -y)

02

Determine the Intended Result T(P)=(rx∘R90)(P)T(P) = (r_x \circ R_{90})(P)

For T(P)T(P), first apply R90R_{90} to the initial point P(3,−5)P(3, -5), then apply rxr_x to the intermediate point:

  1. Apply R90R_{90}: R90(3,−5)=(−(−5),3)=(5,3)R_{90}(3, -5) = (-(-5), 3) = (5, 3)
  2. Apply rxr_x: rx(5,3)=(5,−3)r_x(5, 3) = (5, -3)

Thus, the intended image is: T(P)=(5,−3)T(P) = (5, -3)


03

Determine the Erroneous Result S(P)=(R90∘rx)(P)S(P) = (R_{90} \circ r_x)(P)

For S(P)S(P), the transformations are applied in reverse order: first rxr_x, then R90R_{90}.

  1. Apply rxr_x: rx(3,−5)=(3,−(−5))=(3,5)r_x(3, -5) = (3, -(-5)) = (3, 5)
  2. Apply R90R_{90}: R90(3,5)=(−5,3)R_{90}(3, 5) = (-5, 3)

Thus, the erroneous image is: S(P)=(−5,3)S(P) = (-5, 3)


04

Calculate the Displacement Vector d⃗\vec{d}

The displacement vector representing the error is given by subtracting the coordinates of T(P)T(P) from S(P)S(P):

d⃗=S(P)−T(P)=⟨−5−5,  3−(−3)⟩=⟨−10,6⟩\vec{d} = S(P) - T(P) = \langle -5 - 5, \; 3 - (-3) \rangle = \langle -10, 6 \rangle

Common Pitfall: Geometric transformations are generally non-commutative, meaning A∘B≠B∘AA \circ B \neq B \circ A. Swapping the order changes intermediate positions and usually yields completely different final coordinates.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers a 90° counterclockwise rotation rule as (y, -x) instead of (-y, x), leading to incorrect transformed coordinates and displacement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    R90(x,y)=(y,−x)  ⟹  R90(3,−5)=(−5,−3)  ⟹  T(P)=rx(−5,−3)=(−5,3)R_{90}(x, y) = (y, -x) \implies R_{90}(3, -5) = (-5, -3) \implies T(P) = r_x(-5, -3) = (-5, 3)

    Correct

    R90(x,y)=(−y,x)  ⟹  R90(3,−5)=(5,3)  ⟹  T(P)=rx(5,3)=(5,−3)R_{90}(x, y) = (-y, x) \implies R_{90}(3, -5) = (5, 3) \implies T(P) = r_x(5, 3) = (5, -3)

    A counterclockwise rotation of 90∘90^\circ about the origin follows the rule (x,y)→(−y,x)(x, y) \to (-y, x). Writing (y,−x)(y, -x) corresponds to a clockwise 90∘90^\circ rotation, which led to incorrect intermediate and final coordinates for T(P)T(P).

  2. Step 2

    rx(3,−5)=(3,5)  ⟹  S(P)=R90(3,5)=(5,−3)r_x(3, -5) = (3, 5) \implies S(P) = R_{90}(3, 5) = (5, -3)

    Correct

    rx(3,−5)=(3,5)  ⟹  S(P)=R90(3,5)=(−5,3)r_x(3, -5) = (3, 5) \implies S(P) = R_{90}(3, 5) = (-5, 3)

    You evaluated rx(3,−5)=(3,5)r_x(3, -5) = (3, 5) correctly, but applying your earlier incorrect rule for R90R_{90} caused S(P)S(P) to become (5,−3)(5, -3) instead of (−5,3)(-5, 3).

  3. Step 3

    d=S(P)−T(P)  ⟹  d=(5−(−5),−3−3)=(10,−6)d = S(P) - T(P) \implies d = (5 - (-5), -3 - 3) = (10, -6)

    Correct

    d⃗=S(P)−T(P)=⟨−5−5,3−(−3)⟩=⟨−10,6⟩\vec{d} = S(P) - T(P) = \langle -5 - 5, 3 - (-3) \rangle = \langle -10, 6 \rangle

    Your vector subtraction formula and arithmetic were consistent with your previous coordinates, but because both coordinates were incorrect, the resulting vector has the opposite sign.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the reverse evaluation sequence for the composition S=R90∘rxS = R_{90} \circ r_x.

You accurately applied the reflection rule across the xx-axis, (x,y)→(x,−y)(x, y) \to (x, -y).

You set up the displacement formula d⃗=S(P)−T(P)\vec{d} = S(P) - T(P) correctly and executed component subtraction accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Rotation Coordinate Rule Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the coordinate sign rule for a counterclockwise 90∘90^\circ rotation, (−y,x)(-y, x), with the rule for a clockwise 90∘90^\circ rotation, (y,−x)(y, -x).

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Standard CCW Rotation Rule
  • A positive rotation is always counterclockwise: R90(x,y)=(−y,x)R_{90}(x, y) = (-y, x).

  • Mentally test the unit vector (1,0)(1, 0): rotating 90∘90^\circ counterclockwise moves it to (0,1)(0, 1), confirming x′=−yx' = -y and y′=xy' = x.

Differentiate Clockwise from Counterclockwise
  • Clockwise 90∘90^\circ (or 270∘270^\circ CCW) maps (x,y)→(y,−x)(x, y) \to (y, -x), while counterclockwise 90∘90^\circ maps (x,y)→(−y,x)(x, y) \to (-y, x).

  • Check which quadrant the point should land in before writing down the transformed coordinate signs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct counterclockwise rotation rule to P(3,−5)P(3, -5): R90(3,−5)=(−(−5),3)=(5,3)R_{90}(3, -5) = (-(-5), 3) = (5, 3).

  2. Reflect the result across the xx-axis: T(P)=rx(5,3)=(5,−3)T(P) = r_x(5, 3) = (5, -3).

  3. Compute the reversed composition: rx(3,−5)=(3,5)r_x(3, -5) = (3, 5), then S(P)=R90(3,5)=(−5,3)S(P) = R_{90}(3, 5) = (-5, 3).

  4. Compute the displacement vector: d⃗=S(P)−T(P)=⟨−5−5,3−(−3)⟩=⟨−10,6⟩\vec{d} = S(P) - T(P) = \langle -5 - 5, 3 - (-3) \rangle = \langle -10, 6 \rangle.

Final answer

T(P)=(5,−3)T(P) = (5, -3), S(P)=(−5,3)S(P) = (-5, 3), and d⃗=⟨−10,6⟩\vec{d} = \langle -10, 6 \rangle

NEXT STEPS
Final Takeaways from Your Teacher
  • Review coordinate algebraic rules for standard rotations (90∘90^\circ, 180∘180^\circ, 270∘270^\circ) centered at the origin.

  • Practice using reference unit vectors (1,0)(1, 0) and (0,1)(0, 1) to quickly reconstruct rotation rules from scratch without memorization.

OverviewACEpath Teacher's Diagnosis

02 The student confuses reflection across the x-axis with reflection across the y-axis, negating the x-coordinate instead of the y-coordinate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    R90(3,−5)=(5,3)R_{90}(3, -5) = (5, 3)

  2. Step 2

    rx reflects to (−x,y)  ⟹  T(P)=(−5,3)r_x \text{ reflects to } (-x, y) \implies T(P) = (-5, 3)

    Correct

    rx(x,y)=(x,−y)  ⟹  T(P)=rx(5,3)=(5,−3)r_x(x, y) = (x, -y) \implies T(P) = r_x(5, 3) = (5, -3)

    Reflecting across the xx-axis preserves the xx-coordinate and negates the yy-coordinate: (x,y)↦(x,−y)(x, y) \mapsto (x, -y). You wrote (−x,y)(-x, y), which corresponds to reflection across the yy-axis.

  3. Step 3

    rx(3,−5)=(−3,−5)  ⟹  S(P)=R90(−3,−5)=(5,−3)r_x(3, -5) = (-3, -5) \implies S(P) = R_{90}(-3, -5) = (5, -3)

    Correct

    rx(3,−5)=(3,5)  ⟹  S(P)=R90(3,5)=(−5,3)r_x(3, -5) = (3, 5) \implies S(P) = R_{90}(3, 5) = (-5, 3)

    You correctly evaluated your rotation on the intermediate point, but the intermediate point was derived from the incorrect reflection formula.

  4. Step 4

    d⃗=S(P)−T(P)=⟨5−(−5),−3−3⟩=⟨10,−6⟩\vec{d} = S(P) - T(P) = \langle 5 - (-5), -3 - 3 \rangle = \langle 10, -6 \rangle

    Correct

    d⃗=S(P)−T(P)=⟨−5−5,3−(−3)⟩=⟨−10,6⟩\vec{d} = S(P) - T(P) = \langle -5 - 5, 3 - (-3) \rangle = \langle -10, 6 \rangle

    Your vector subtraction procedure was set up correctly, but the values were affected by the previous incorrect coordinates for T(P)T(P) and S(P)S(P).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the 90∘90^\circ counterclockwise rotation rule, R90(x,y)=(−y,x)R_{90}(x, y) = (-y, x).

You followed the proper order of operations for function composition, evaluating the inner transformation first.

You set up the displacement vector formula d⃗=S(P)−T(P)\vec{d} = S(P) - T(P) correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Axis reflection formula confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused reflection across the xx-axis (rxr_x) with reflection across the yy-axis (ryr_y), negating the xx-coordinate rather than the yy-coordinate.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reflecting Across an Axis
  • When reflecting across an axis, the coordinate along that axis stays unchanged, while the perpendicular coordinate flips sign: rx(x,y)=(x,−y)r_x(x, y) = (x, -y) and ry(x,y)=(−x,y)r_y(x, y) = (-x, y).

  • Check that the axis named in the reflection keeps its coordinate positive/negative state unchanged.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct reflection across the xx-axis to the intermediate point (5,3)(5, 3): T(P)=rx(5,3)=(5,−3)T(P) = r_x(5, 3) = (5, -3).

  2. Compute the reversed composition S(P)=(R90∘rx)(P)S(P) = (R_{90} \circ r_x)(P) starting with rx(3,−5)=(3,5)r_x(3, -5) = (3, 5), then rotate: S(P)=R90(3,5)=(−5,3)S(P) = R_{90}(3, 5) = (-5, 3).

  3. Calculate the displacement vector: d⃗=S(P)−T(P)=⟨−5−5,3−(−3)⟩=⟨−10,6⟩\vec{d} = S(P) - T(P) = \langle -5 - 5, 3 - (-3) \rangle = \langle -10, 6 \rangle.

Final answer

T(P)=(5,−3)T(P) = (5, -3), S(P)=(−5,3)S(P) = (-5, 3), and d⃗=⟨−10,6⟩\vec{d} = \langle -10, 6 \rangle

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying reflection rules by picturing whether the point crosses the horizontal line (yy changes sign) or the vertical line (xx changes sign).

  • Work through composite transformations step-by-step, writing down the coordinate rule for each transformation before plugging in numbers.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts in reverse order when computing displacement, calculating T(P) - S(P) instead of S(P) - T(P).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    R90(3,−5)=(5,3)  ⟹  T(P)=rx(5,3)=(5,−3)R_{90}(3, -5) = (5, 3) \implies T(P) = r_x(5, 3) = (5, -3)

  2. Step 2

    rx(3,−5)=(3,5)  ⟹  S(P)=R90(3,5)=(−5,3)r_x(3, -5) = (3, 5) \implies S(P) = R_{90}(3, 5) = (-5, 3)

  3. Step 3

    d=T(P)−S(P)=(5−(−5),−3−3)=(10,−6)d = T(P) - S(P) = (5 - (-5), -3 - 3) = (10, -6)

    Correct

    d⃗=S(P)−T(P)=⟨−5−5,3−(−3)⟩=⟨−10,6⟩\vec{d} = S(P) - T(P) = \langle -5 - 5, 3 - (-3) \rangle = \langle -10, 6 \rangle

    The problem defines the displacement vector as d⃗=S(P)−T(P)\vec{d} = S(P) - T(P), but you computed T(P)−S(P)T(P) - S(P), which gave the opposite vector.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the coordinate rules for both a 90∘90^\circ counterclockwise rotation and a reflection across the xx-axis.

You evaluated composite transformations in the correct inner-to-outer order for both T(P)T(P) and S(P)S(P).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed vector subtraction order

You set up the displacement formula backwards as T(P)−S(P)T(P) - S(P) instead of the prompt's defined d⃗=S(P)−T(P)\vec{d} = S(P) - T(P).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of terms in vector difference d⃗=B−A\vec{d} = B - A (terminal point minus initial point) or misreading the explicitly given equation d⃗=S(P)−T(P)\vec{d} = S(P) - T(P).

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Displacement Formula
  • A displacement vector from point AA to point BB is always AB⃗=B−A\vec{AB} = B - A (terminal minus initial).

  • Always check whether the problem specifies d⃗=S(P)−T(P)\vec{d} = S(P) - T(P) or T(P)−S(P)T(P) - S(P) before substituting coordinates.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the correct formula: d⃗=S(P)−T(P)\vec{d} = S(P) - T(P).

  2. Substitute the coordinates: S(P)=(−5,3)S(P) = (-5, 3) and T(P)=(5,−3)T(P) = (5, -3).

  3. Subtract component-wise: d⃗=⟨−5−5,3−(−3)⟩=⟨−10,6⟩\vec{d} = \langle -5 - 5, 3 - (-3) \rangle = \langle -10, 6 \rangle.

Final answer

T(P)=(5,−3)T(P) = (5, -3), S(P)=(−5,3)S(P) = (-5, 3), and d⃗=⟨−10,6⟩\vec{d} = \langle -10, 6 \rangle

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check vector subtraction setups by explicitly labeling the initial and terminal points.

  • Practice computing difference vectors with directed line segments to confirm that the vector points in the intended direction.

Lock it in

Similar question

01

Apply a counterclockwise rotation of 90∘90^\circ about the origin, followed by a reflection across the yy-axis (ryr_y), to the point A(2,−6)A(2, -6). Find the final coordinates.

Answer

(−6,2)(-6, 2). First, R90(2,−6)=(−(−6),2)=(6,2)R_{90}(2, -6) = (-(-6), 2) = (6, 2). Then reflect across the yy-axis: ry(6,2)=(−6,2)r_y(6, 2) = (-6, 2).

02

Let T=R90∘ryT = R_{90} \circ r_y and S=ry∘R90S = r_y \circ R_{90}. Evaluate both transformations on the point B(−1,4)B(-1, 4), and compute the displacement vector v⃗=S(B)−T(B)\vec{v} = S(B) - T(B).

Answer

T(B)=(−4,1)T(B) = (-4, 1), S(B)=(4,−1)S(B) = (4, -1), and v⃗=⟨8,−2⟩\vec{v} = \langle 8, -2 \rangle. For TT: ry(−1,4)=(1,4)  ⟹  R90(1,4)=(−4,1)r_y(-1, 4) = (1, 4) \implies R_{90}(1, 4) = (-4, 1). For SS: R90(−1,4)=(−4,−1)  ⟹  ry(−4,−1)=(4,−1)R_{90}(-1, 4) = (-4, -1) \implies r_y(-4, -1) = (4, -1). Subtracting gives v⃗=⟨4−(−4),−1−1⟩=⟨8,−2⟩\vec{v} = \langle 4 - (-4), -1 - 1 \rangle = \langle 8, -2 \rangle.

03

A transformation is defined as C=R180∘rx∘R90C = R_{180} \circ r_x \circ R_{90}, where RR angles are counterclockwise about the origin. Find the single equivalent transformation matrix or coordinate rule for C(x,y)C(x, y), and evaluate it on point P(3,−5)P(3, -5).

Answer

Coordinate rule: C(x,y)=(y,x)C(x, y) = (y, x) (reflection across the line y=xy = x), so C(3,−5)=(−5,3)C(3, -5) = (-5, 3). Step-by-step: (x,y)→R90(−y,x)→rx(−y,−x)→R180(y,x)(x, y) \xrightarrow{R_{90}} (-y, x) \xrightarrow{r_x} (-y, -x) \xrightarrow{R_{180}} (y, x). Applying this gives C(3,−5)=(−5,3)C(3, -5) = (-5, 3).

Loading workspace…