Resources

Consider the nearly singular system with parameter ε>0\varepsilon > 0: {x+y=2x+(1+ε)y=2+3ε\begin{cases} x + y = 2 \\ x + (1 + \varepsilon)y = 2 + 3\varepsilon \end{cases} Use elimination to find the exact solution (x(ε),y(ε))(x(\varepsilon), y(\varepsilon)) in terms of ε\varepsilon, and evaluate the asymptotic limit lim⁡ε→0+(x(ε),y(ε))\lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)).

Answer and steps

Final answer

(x(ε),y(ε))=(−1,3)(x(\varepsilon), y(\varepsilon)) = (-1, 3); lim⁡ε→0+(x(ε),y(ε))=(−1,3)\lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)) = (-1, 3)

Steps

01

Eliminate xx

To solve the system using elimination, write the two equations clearly:

  1. x+y=2x + y = 2
  2. x+(1+ε)y=2+3εx + (1 + \varepsilon)y = 2 + 3\varepsilon

Both equations have a coefficient of 11 for the variable xx. Subtract equation (1) from equation (2):

[x+(1+ε)y]−[x+y]=(2+3ε)−2[x + (1 + \varepsilon)y] - [x + y] = (2 + 3\varepsilon) - 2

Simplify both sides:

(1+ε−1)y=3ε(1 + \varepsilon - 1)y = 3\varepsilon εy=3ε\varepsilon y = 3\varepsilon

02

Solve for yy

Because the problem specifies ε>0\varepsilon > 0, we know ε≠0\varepsilon \neq 0. Therefore, divide both sides by ε\varepsilon:

y=3εε=3y = \frac{3\varepsilon}{\varepsilon} = 3

Notice that y(ε)=3y(\varepsilon) = 3 is a constant value for every ε>0\varepsilon > 0.

03

Substitute to solve for xx

Substitute y=3y = 3 back into the simpler equation, equation (1):

x+3=2x + 3 = 2 x=2−3=−1x = 2 - 3 = -1

Thus, the exact solution in terms of ε\varepsilon is:

(x(ε),y(ε))=(−1,3)(x(\varepsilon), y(\varepsilon)) = (-1, 3)

04

Evaluate the limit as ε→0+\varepsilon \to 0^+

Since both coordinate values are independent of ε\varepsilon, taking the limit as ε→0+\varepsilon \to 0^+ yields:

lim⁡ε→0+x(ε)=lim⁡ε→0+(−1)=−1\lim_{\varepsilon \to 0^+} x(\varepsilon) = \lim_{\varepsilon \to 0^+} (-1) = -1 lim⁡ε→0+y(ε)=lim⁡ε→0+3=3\lim_{\varepsilon \to 0^+} y(\varepsilon) = \lim_{\varepsilon \to 0^+} 3 = 3

Hence, the asymptotic limit is:

lim⁡ε→0+(x(ε),y(ε))=(−1,3)\lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)) = (-1, 3)

Pitfall to avoid: At the exact value ε=0\varepsilon = 0, both lines merge into the single line x+y=2x + y = 2, which has infinitely many solutions. However, for any small perturbation ε>0\varepsilon > 0, the two lines intersect at precisely the unique point (−1,3)(-1, 3), which determines the limiting position.

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misdistributes when subtracting the left-hand sides and drops the coefficient of y, concluding that y = 3ε instead of εy = 3ε.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    x + (1 + \varepsilon)y - (x + y) = (2 + 3\varepsilon) - 2

  2. Step 2

    y = 3\varepsilon

    Correct

    εy=3ε  ⟹  y=3\varepsilon y = 3\varepsilon \implies y = 3

    Expanding and simplifying the left-hand side gives (1+ε)y−y=y+εy−y=εy(1 + \varepsilon)y - y = y + \varepsilon y - y = \varepsilon y. The equation becomes εy=3ε\varepsilon y = 3\varepsilon, which yields y=3y = 3 after dividing by ε>0\varepsilon > 0.

  3. Step 3

    x = 2 - 3\varepsilon   ⟹  \implies (x(\varepsilon), y(\varepsilon)) = (2 - 3\varepsilon, 3\varepsilon)

    Correct

    x = 2 - 3 = -1   ⟹  \implies (x(\varepsilon), y(\varepsilon)) = (-1, 3)

    Your substitution into x=2−yx = 2 - y followed correctly from your previous value of yy, but it inherited the error from Step 2.

  4. Step 4

    $\lim_{\varepsilon →\to 0^+}$ (2 - 3\varepsilon, 3\varepsilon) = (2, 0)_

    Correct

    $\lim_{\varepsilon →\to 0^+}$ (-1, 3) = (-1, 3)_

    The limit calculation was mathematically consistent with your expression, but it inherited the erroneous parametric solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You chose the elimination method and correctly targeted the variable xx by subtracting the two equations.

You handled the limit process correctly according to your calculated expressions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distributive / coefficient collection error with parameters

You simplified (1+ε)y−y(1+\varepsilon)y - y as yy instead of εy\varepsilon y, losing the factor of ε\varepsilon multiplying yy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the variable yy as having a coefficient of 11 after subtraction rather than distributing (1+ε)y=y+εy(1+\varepsilon)y = y + \varepsilon y and subtracting yy to leave εy\varepsilon y.

REASONING PATH
Your ACEpath teacher’s suggested approach
Expand before collecting
  • When subtracting expressions with linear combinations of parameters like (1+ε)y−y(1+\varepsilon)y - y, expand completely or factor out yy: (1+ε−1)y(1 + \varepsilon - 1)y.

  • Write out (1+ε)y−y=y+εy−y=εy(1+\varepsilon)y - y = y + \varepsilon y - y = \varepsilon y before equating it to the right-hand side.

Check parameter division
  • When an equation simplifies to Aεy=BεA\varepsilon y = B\varepsilon with ε>0\varepsilon > 0, divide both sides by ε\varepsilon to isolate yy.

  • Always check if ε\varepsilon cancels out from both sides before solving for xx.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Simplify the left-hand side: [x+(1+ε)y]−[x+y]=(1+ε−1)y=εy[x + (1 + \varepsilon)y] - [x + y] = (1 + \varepsilon - 1)y = \varepsilon y.

  2. Equate to the simplified right-hand side: εy=3ε\varepsilon y = 3\varepsilon.

  3. Since ε>0\varepsilon > 0, divide both sides by ε\varepsilon to obtain y=3y = 3.

  4. Substitute y=3y = 3 into the first equation: x+3=2  ⟹  x=−1x + 3 = 2 \implies x = -1.

  5. Evaluate the limit: lim⁡ε→0+(−1,3)=(−1,3)\lim_{\varepsilon \to 0^+} (-1, 3) = (-1, 3).

Final answer

(x(\varepsilon), y(\varepsilon)) = (-1, 3);   $\lim_{\varepsilon →\to 0^+}$ (x(\varepsilon), y(\varepsilon)) = (-1, 3)_

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice combining like terms where one coefficient contains an added parameter, such as (a+1)x−x(a + 1)x - x.

  • Verify your solution by substituting the point back into both original equations to check if the equality holds for all ε>0\varepsilon > 0.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the equations without distributing the negative sign across both terms on the right-hand side, obtaining εy = 3ε - 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    (1 + \varepsilon)y - y = 2 + 3\varepsilon - 2

  2. Step 2

    \varepsilon y = 3\varepsilon - 4   ⟹  \implies y(\varepsilon) = 3 - 4ε\frac{4}{\varepsilon}

    Correct

    εy=3ε  ⟹  y(ε)=3\varepsilon y = 3\varepsilon \implies y(\varepsilon) = 3

    When simplifying the right-hand side, 2+3ε−22 + 3\varepsilon - 2 equals 3ε3\varepsilon, because 2−2=02 - 2 = 0. You incorrectly evaluated 2−22 - 2 as −4-4.

  3. Step 3

    x(ε)=2−y(ε)=2−(3−4ε)=−1+4εx(\varepsilon) = 2 - y(\varepsilon) = 2 - \left(3 - \frac{4}{\varepsilon}\right) = -1 + \frac{4}{\varepsilon}

    Correct

    x(\varepsilon) = 2 - y(\varepsilon) = 2 - 3 = -1

    You correctly substituted your expression for y(ε)y(\varepsilon) back into the first equation, but the result inherited the previous arithmetic error.

  4. Step 4

    (x(ε),y(ε))=(−1+4ε, 3−4ε)(x(\varepsilon), y(\varepsilon)) = \left(-1 + \frac{4}{\varepsilon},\ 3 - \frac{4}{\varepsilon}\right)

    Correct

    (x(\varepsilon), y(\varepsilon)) = (-1, 3)

    The coordinate pair follows logically from your earlier steps, but it is incorrect due to the propagated error from Step 2.

  5. Step 5

    As \text{As } \varepsilon →\to 0^+, 4ε\frac{4}{\varepsilon} →\to ∞\infty,  so the limit does not exist.\text{ so the limit does not exist.}

    Correct

    $\lim_{\varepsilon →\to 0^+}$ (x(\varepsilon), y(\varepsilon)) = (-1, 3)_

    Because x(ε)=−1x(\varepsilon) = -1 and y(ε)=3y(\varepsilon) = 3 are constants independent of ε\varepsilon, the limit exists and equals (−1,3)(-1, 3).

WHAT YOU DID WELL
Compliments from Your Teacher

You chose the correct strategy of subtracting the two equations to eliminate xx.

You handled the algebraic substitution of y(ε)y(\varepsilon) into the linear equation accurately.

You demonstrated clear reasoning when analyzing the behavior of terms as ε→0+\varepsilon \to 0^+.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic / Combining Like Terms Error

You calculated 2−22 - 2 as −4-4 instead of 00 when simplifying the right-hand side of the subtracted equations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A sign or subtraction slip occurred while collecting the constant terms on the right-hand side, turning an exact cancellation 2−2=02 - 2 = 0 into −4-4.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant Cancellation Check
  • For any real constant cc, c−c=0c - c = 0.

  • Always pair like constants explicitly: (2−2)+3ε=0+3ε=3ε(2 - 2) + 3\varepsilon = 0 + 3\varepsilon = 3\varepsilon.

Parameter Independence Check
  • In perturbed linear systems, verify whether solution coordinates depend on the perturbation parameter ε\varepsilon before evaluating limits.

  • Substitute your computed values back into both original equations to verify that all terms involving ε\varepsilon balance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Simplify the right-hand side: (2−2)+3ε=3ε(2 - 2) + 3\varepsilon = 3\varepsilon, giving εy=3ε\varepsilon y = 3\varepsilon.

  2. Since ε>0\varepsilon > 0, divide both sides by ε\varepsilon to obtain y=3y = 3.

  3. Substitute y=3y = 3 into x+y=2x + y = 2 to find x=2−3=−1x = 2 - 3 = -1.

  4. Evaluate the limit of the constant pair: lim⁡ε→0+(−1,3)=(−1,3)\lim_{\varepsilon \to 0^+} (-1, 3) = (-1, 3).

Final answer

(x(\varepsilon), y(\varepsilon)) = (-1, 3); $\lim_{\varepsilon →\to 0^+}$ (x(\varepsilon), y(\varepsilon)) = (-1, 3)_

NEXT STEPS
Final Takeaways from Your Teacher
  • Take extra care when combining constant numbers during elimination to prevent unintentional sign errors.

  • Practice checking intermediate solutions by substituting them back into the original system before evaluating limits.

OverviewACEpath Teacher's Diagnosis

03 The student sets ε = 0 directly into the system before solving, failing to find the solution in terms of ε.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Set \text{Set } \varepsilon = 0:   ⟹  \implies x + y = 2,; x + y = 2

    Correct

    [x + (1 + \varepsilon)y] - [x + y] = (2 + 3\varepsilon) - 2   ⟹  \implies \varepsilon y = 3\varepsilon

    You substituted ε=0\varepsilon = 0 directly at the start. Because ε>0\varepsilon > 0, you need to maintain ε\varepsilon as a nonzero parameter and subtract the first equation from the second to eliminate xx.

  2. Step 2

    (x(\varepsilon), y(\varepsilon)) = (2 - y, y)

    Correct

    y = 3εε\frac{3\varepsilon}{\varepsilon} = 3   ⟹  \implies x = 2 - 3 = -1   ⟹  \implies (x(\varepsilon), y(\varepsilon)) = (-1, 3)

    Because ε=0\varepsilon = 0 was substituted prematurely, you obtained infinitely many solutions rather than the unique solution determined by dividing εy=3ε\varepsilon y = 3\varepsilon by ε>0\varepsilon > 0.

  3. Step 3

    $\lim_{\varepsilon →\to 0^+}$ (x(\varepsilon), y(\varepsilon)) = (2 - y, y)_

    Correct

    $\lim_{\varepsilon →\to 0^+}$ (x(\varepsilon), y(\varepsilon)) = (-1, 3)_

    This limit carries over the incorrect parameterized family from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that substituting ε=0\varepsilon = 0 collapses both equations into the single line x+y=2x + y = 2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Premature Parameter Evaluation

You substituted ε=0\varepsilon = 0 into the system before solving it algebraically.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated taking a limit as setting the parameter directly to zero at the initial equation level, rather than finding the exact solution as a function of the parameter ε>0\varepsilon > 0 and then taking the limit of that resulting expression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Keep Parameters Variable
  • When a parameter has a domain like ε>0\varepsilon > 0, solve the system in terms of ε\varepsilon before evaluating any limit.

  • Perform elimination on the full equations containing ε\varepsilon, taking advantage of ε≠0\varepsilon \neq 0 to divide when solving for variables.

Limit Order of Operations
  • For limits of solutions, solve first, take limits second: (x(ε),y(ε))→lim⁡ε→0+(x(ε),y(ε))(x(\varepsilon), y(\varepsilon)) \to \lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)).

  • Never substitute the limiting value of a parameter into the original system if that value causes the system to become singular or lose uniqueness.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the first equation x+y=2x + y = 2 from the second equation x+(1+ε)y=2+3εx + (1 + \varepsilon)y = 2 + 3\varepsilon to eliminate xx: [x+(1+ε)y]−(x+y)=(2+3ε)−2[x + (1 + \varepsilon)y] - (x + y) = (2 + 3\varepsilon) - 2.

  2. Simplify to get εy=3ε\varepsilon y = 3\varepsilon.

  3. Since ε>0\varepsilon > 0, divide both sides by ε\varepsilon to obtain y=3y = 3.

  4. Substitute y=3y = 3 back into x+y=2x + y = 2 to find x=2−3=−1x = 2 - 3 = -1.

  5. Evaluate the limit: lim⁡ε→0+(−1,3)=(−1,3)\lim_{\varepsilon \to 0^+} (-1, 3) = (-1, 3).

Final answer

(x(\varepsilon), y(\varepsilon)) = (-1, 3);  $\lim_{\varepsilon →\to 0^+}$ (x(\varepsilon), y(\varepsilon)) = (-1, 3)_

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice solving 2×22 \times 2 systems with small parameters ε\varepsilon symbolically without substituting numbers.

  • Review how division by nonzero parameters works during Gaussian elimination.

Lock it in

Similar question

01

Solve the system using elimination for ε>0\varepsilon > 0: {x+2y=4x+(2+ε)y=4+5ε\begin{cases} x + 2y = 4 \\ x + (2 + \varepsilon)y = 4 + 5\varepsilon \end{cases} Find (x,y)(x, y) in terms of ε\varepsilon.

Answer

x=−6,y=5x = -6,\quad y = 5 Subtract the first equation from the second: [(2+ε)−2]y=5ε  ⟹  εy=5ε[(2 + \varepsilon) - 2]y = 5\varepsilon \implies \varepsilon y = 5\varepsilon. Since ε>0\varepsilon > 0, y=5y = 5. Substitute back into x+2(5)=4  ⟹  x=−6x + 2(5) = 4 \implies x = -6.

02

Consider the system with parameter ε>0\varepsilon > 0: {2x+y=3(2+3ε)x+y=3+6ε\begin{cases} 2x + y = 3 \\ (2 + 3\varepsilon)x + y = 3 + 6\varepsilon \end{cases} Find the solution (x(ε),y(ε))(x(\varepsilon), y(\varepsilon)) and compute lim⁡ε→0+(x(ε),y(ε))\lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)).

Answer

(x(ε),y(ε))=(2,−1);lim⁡ε→0+(x(ε),y(ε))=(2,−1)(x(\varepsilon), y(\varepsilon)) = (2, -1);\quad \lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)) = (2, -1) Subtract the first equation from the second: [(2+3ε)−2]x=6ε  ⟹  3εx=6ε  ⟹  x=2[(2 + 3\varepsilon) - 2]x = 6\varepsilon \implies 3\varepsilon x = 6\varepsilon \implies x = 2. Substitute into 2(2)+y=3  ⟹  y=−12(2) + y = 3 \implies y = -1. Both components are independent of ε\varepsilon, so the limit is (2,−1)(2, -1).

03

Solve the parametric system for ε>0\varepsilon > 0: {x+(1−ε)y=1x+y=1+2ε+ε2\begin{cases} x + (1 - \varepsilon)y = 1 \\ x + y = 1 + 2\varepsilon + \varepsilon^2 \end{cases} Find (x(ε),y(ε))(x(\varepsilon), y(\varepsilon)) and evaluate lim⁡ε→0+(x(ε),y(ε))\lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)).

Answer

(x(ε),y(ε))=(−1−ε+ε2,2+ε);lim⁡ε→0+(x(ε),y(ε))=(−1,2)(x(\varepsilon), y(\varepsilon)) = (-1 - \varepsilon + \varepsilon^2, 2 + \varepsilon);\quad \lim_{\varepsilon \to 0^+} (x(\varepsilon), y(\varepsilon)) = (-1, 2) Subtract the first equation from the second: [1−(1−ε)]y=2ε+ε2  ⟹  εy=ε(2+ε)[1 - (1 - \varepsilon)]y = 2\varepsilon + \varepsilon^2 \implies \varepsilon y = \varepsilon(2 + \varepsilon). Divide by ε>0\varepsilon > 0 to get y=2+εy = 2 + \varepsilon. Substitute into the second equation: x=1+2ε+ε2−(2+ε)=−1+ε+ε2−2ε=−1−ε+ε2x = 1 + 2\varepsilon + \varepsilon^2 - (2 + \varepsilon) = -1 + \varepsilon + \varepsilon^2 - 2\varepsilon = -1 - \varepsilon + \varepsilon^2 (or via first: x=1−(1−ε)(2+ε)=−1+ε+ε2x = 1 - (1-\varepsilon)(2+\varepsilon) = -1 + \varepsilon + \varepsilon^2). Taking ε→0+\varepsilon \to 0^+ gives (x,y)→(−1,2)(x, y) \to (-1, 2).

Loading workspace…