Resources
A continuous linear function is graphed on the Cartesian plane. The line contains the points and . A student observing the completed graph notes that the line crosses the -axis at and crosses the -axis at . Reverse-engineer this graph to determine the original parameters: (a) find the numerical values of the slope and -intercept , and (b) solve backwards for the unknown parameter and state the explicit coordinates of both points.
Answer and steps
Final answer
(a) , (so ); (b) (or ), yielding the points and .
Steps
Part (a): Determine the Slope and -Intercept
- Identify the -intercept (): The line crosses the -axis at the point . By definition, the value of the function at is the -intercept:
- Calculate the slope (): The line also crosses the -axis at . Using the slope formula with the two known intercepts and :
- Form the equation of the line: Substituting and into the slope-intercept form gives:
Part (b): Solve for and Identify the Points
- Solve for using the point : Since the point lies on the line , its coordinates must satisfy the equation: Subtract from both sides: Divide by :
-
Determine the coordinates of both points:
- The first point is .
- The second point is given by . Substituting : Thus, the second point evaluates to .
Typical errors
01 The student inverts the slope formula as Δx/Δy when using the intercepts, resulting in a slope of 1/2 instead of 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
m = =
Correctm = = = = 2
You placed the -coordinates in the numerator and the -coordinates in the denominator. Slope is defined as rise over run, .
- Step 2
y b = 2 f(x) = x + 2
Correctb = 2 f(x) = 2x + 2
You correctly read the -intercept as from , but the resulting linear function used your inverted slope instead of .
- Step 3
5 = (k) + 2 3 = k k = 6
Correct5 = 2(k) + 2 3 = 2k k = = 1.5
You set up and solved the linear equation for correctly according to your function, but the result was altered by using .
- Step 4
(6, 5) (4, 2(6) + 1) = (4, 13)
Correct(1.5, 5) (4, 2(1.5) + 1) = (4, 4)
You evaluated the coordinates accurately using your value of , but the points differ from the correct coordinates due to the earlier slope error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the -intercept as directly from the given point .
You substituted the point into your linear equation and solved for using clean, step-by-step algebra.
You correctly substituted your value of into to determine the second point.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally placed on top and on the bottom when applying the slope formula.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the ratio of vertical change to horizontal change by calculating instead of . Remembering 'rise over run' guarantees that vertical -values always stay in the numerator.
REASONING PATH
Your ACEpath teacher’s suggested approach- Rise over Run
m = =
Always write down and above your points before plugging them in, ensuring stays in the numerator.
- Sanity Check with Intercepts
(-1, 0) (0, 2), 1 2.
Check the visual steepness on an axis: going up over means the slope must be , which is greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the slope using .
Form the correct linear function: .
Substitute into : .
Evaluate the points: and .
(a) , ; (b) , giving points and
02 The student introduces a sign error when subtracting the x-coordinates in the slope formula, computing m = -2 instead of m = 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You subtracted the -coordinates in the opposite direction from the -coordinates ( instead of ), which caused a sign error and yielded instead of .
- Step 2
- Step 3Correct
You correctly assembled the linear equation using slope-intercept form , but the equation inherits the incorrect slope from Step 1.
- Step 4Correct
You correctly substituted into your equation and solved for with accurate algebra, but the numerical result is affected by the negative slope.
- Step 5
(-1.5, 5) (4, 2(-1.5) + 1) = (4, -2)
Correct(1.5, 5) (4, 2(1.5) + 1) = (4, 4)
You correctly evaluated both coordinate pairs using your value of , but the coordinates reflect the earlier sign error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the point provides the -intercept .
You correctly set up the linear model using slope-intercept form .
You correctly substituted the point into your function and solved the linear equation accurately.
You correctly evaluated the second point by substituting your value of into .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeIn the denominator of your slope calculation, you computed instead of , subtracting while using in the numerator.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to preserve the identical direction of subtraction when applying . When the -subtraction goes from second point to first point, the -subtraction must follow the exact same direction. Mixing them reverses the overall sign of the slope.
REASONING PATH
Your ACEpath teacher’s suggested approach- Consistent Subtraction Direction
For points and , the slope is . The point order must match in both numerator and denominator.
Explicitly label and before writing the fraction, and use parentheses around negative values: .
- Visual Slope Sanity Check
A line passing through on the negative -axis and on the positive -axis rises from left to right, meaning its slope must be positive ().
Sketch a quick two-axis diagram to confirm whether the line rises () or falls () before proceeding.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the slope with consistent subtraction order: .
Write the correct linear function: .
Substitute into : .
Evaluate the second point : , giving .
(a) , ; (b) , yielding the points and .
03 The student swaps the x and y coordinates of (k, 5) by plugging 5 in for x and k in for y when solving for k.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In an ordered pair , the first coordinate is the input and the second coordinate is the output . For the point , you should substitute and into , rather than swapping them.
- Step 3Correct
Because your calculated value of was incorrect due to the coordinate swap in the previous step, the evaluated coordinates of the two points were also affected.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the slope formula with the given axis intercepts.
You correctly identified the -intercept from as .
You correctly formed the linear function .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally reversed the positions of the independent variable and dependent variable when plugging in the point .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the order of variables in a coordinate pair when one coordinate is a variable parameter and the other is a constant.
REASONING PATH
Your ACEpath teacher’s suggested approach- Ordered Pair Definition
An ordered pair is always written as .
Before substituting into , explicitly label the components: write and directly above the pair.
- Substitution Sanity Check
Points on a line must satisfy the equation: .
Check that the independent variable replaces the inside the formula, and the dependent variable replaces or .
CORRECTED PATH
ACEpath Teacher's DemonstrationAssign and to get the equation .
Subtract from both sides to find , giving .
Substitute into the points: the first point is , and the second point is .
(a) , (so ); (b) , yielding the points and .
Lock it in
What is the algebraic definition of the slope between two points and ?
. Memory cue: 'Rise over run'—vertical goes in the sky (numerator), horizontal runs along the ground (denominator).
Similar question
A line has an -intercept at and a -intercept at . Find the slope and the slope-intercept equation of the line.
Answer
, . Key steps: ; the -intercept is .
A linear function passes through and . If the point lies on the line, find the value of .
Answer
. Key steps: Slope , so . Setting gives .
A line passes through and . It also contains the points and . Find the values of and .
Answer
and . Key steps: Slope , so . Setting yields . Then the second point is , giving .