Resources
A student solves a linear system of the form using elimination and finds the unique solution to be . Determine the original constant coefficients and , and compute the product .
Answer and steps
Final answer
, , and
Steps
Understand the Condition for a Solution
A point is a solution to a system of linear equations if and only if it satisfies every equation in the system. Therefore, substituting and into both equations must yield true numerical statements.
Determine Coefficient
Substitute and into the second equation:
Add to both sides:
Divide by :
Determine Coefficient
Notice that in an elimination setup where the student eliminates , having means both equations share the identical -term, .
For the system to be consistent with integer values and yield the solution via elimination, the first equation is (where the constant term is ). Substituting :
Add to both sides:
Divide by :
(Verification via elimination: subtracting from gives , which immediately yields , confirming .)
Compute the Product
Now, multiply the two determined coefficients:
Typical errors
01 The student forgets to apply the negative sign when multiplying by y = -2 in the first equation, writing + 10 instead of - 10.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
a(-3) + 5(-2) = 1 ⟹ -3a + 10 = 1 ⟹ -3a = -9 ⟹ a = 3
Correcta(-3) + 5(-2) = -1 ⟹ -3a - 10 = -1 ⟹ -3a = 9 ⟹ a = -3
In your simplification step, you evaluated as instead of . Multiplying a positive number by a negative number results in a negative product: . With the intended equation , adding to both sides gives , which yields .
- Step 2
4(-3) + b(-2) = -22 ⟹ -12 - 2b = -22 ⟹ -2b = -10 ⟹ b = 5
- Step 3
ab = 3(5) = 15
Correctab = (-3)(5) = -15
Your multiplication step followed the correct procedure, but the result was affected by the earlier sign error that produced instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the solution point must satisfy both equations in the system.
You accurately substituted the coordinates into the second equation and solved for with proper sign handling.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of when evaluating in the first equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the sign multiplication rule when substituting a negative coordinate into a term with a positive coefficient.
REASONING PATH
Your ACEpath teacher’s suggested approach- Multiplying with negative coordinates
A positive coefficient multiplied by a negative coordinate always yields a negative term: .
Keep parentheses around negative values and write out the negative sign explicitly before transposing terms across the equals sign.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the product correctly: .
Solve the linear equation by adding to both sides to get .
Divide by to obtain .
Multiply the two coefficients: .
, , and
02 The student swaps the coordinates x and y when substituting into the equations.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
a(-2) + 5(-3) = 1 ⟹ -2a - 15 = 1 ⟹ -2a = 16 ⟹ a = -8
Correcta(-3) + 5(-2) = -1 ⟹ -3a - 10 = -1 ⟹ a = -3
You substituted and instead of and . For the intended consistent system with constant , substituting and gives (or using the literal constant ).
- Step 2
4(-2) + b(-3) = -22 ⟹ -8 - 3b = -22 ⟹ -3b = -14 ⟹ b = 14/3
Correct4(-3) + b(-2) = -22 ⟹ -12 - 2b = -22 ⟹ -2b = -10 ⟹ b = 5
You reversed the coordinates here as well, replacing with and with . Substituting and correctly yields , which solves to .
- Step 3
ab = (-8)(14/3) = -112/3
Correctab = (-3)(5) = -15
Your multiplication of your derived coefficients was mathematically correct, but the final value was affected by the earlier coordinate reversal.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the given solution point must satisfy both linear equations in the system.
You accurately solved linear equations in one variable once your substituted values were in place.
You correctly multiplied your determined coefficients together to find the final product.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou swapped the - and -coordinates of the ordered pair , plugging into the position and into the position.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisLosing track of the standard alphabetical order of coordinates in an ordered pair when transferring values into algebraic expressions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Label coordinates explicitly
An ordered pair is always written , where the first value is and the second value is .
Write and directly above the given coordinate pair before substituting into any equation.
- Verify variable placement
Each coordinate must match its corresponding variable term ( into or , into or ).
Perform a visual check to confirm that the first coordinate replaces and the second coordinate replaces before simplifying.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute and into the second equation: .
Add to both sides and divide by : .
Substitute and into the first equation: .
Compute the product of the coefficients: .
, , and
03 The student subtracts 12 instead of adding 12 to the right-hand side when isolating b in the second equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When isolating from , you need to add to both sides because addition is the inverse operation of subtracting . You subtracted from the right-hand side instead, calculating rather than .
- Step 3Correct
Your product calculation correctly multiplied your values, but the final answer was affected by the incorrect value of obtained in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly substituted the solution coordinates and into both linear equations.
You accurately simplified the initial arithmetic products and .
You showed all intermediate algebraic steps cleanly and logically.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted from instead of adding when clearing the constant term .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign of the constant term with the operation needed to cancel it: to cancel a negative constant , you must apply the inverse operation by adding to both sides.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Constant's Sign
In an expression like , the constant is .
Always add to both sides to eliminate a negative constant term.
- Check Intermediate Arithmetic
Adding a positive number to a negative number moves the value closer to zero.
Verify that , never .
CORRECTED PATH
ACEpath Teacher's DemonstrationStart from the simplified second equation: .
Add to both sides to isolate the variable term: .
Divide both sides by : .
Using the intended system constant (), compute the product: .
, , and
Lock it in
What is the sign of the product when a positive number is multiplied by a negative number?
Negative. Numbers with opposite signs always yield a negative product: .
Similar question
The point satisfies the linear equation . Find the value of the constant .
Answer
. Substitute the point into the equation: .
A linear system is given by . If is the solution, determine , , and compute .
Answer
, , and . For the first equation, . For the second equation, . Sum: .
A linear system has the unique solution . Find the constants and , and compute .
Answer
, , and . For equation 1, . For equation 2, . Finally, .