Resources

An agricultural researcher measures the height H(t)H(t) (in centimeters) of a newly germinated sunflower stalk at several equally spaced time intervals tt (in days) during its first week of growth: (0,4.0)(0, 4.0), (1,6.5)(1, 6.5), (2,9.0)(2, 9.0), (3,11.5)(3, 11.5), (4,14.0)(4, 14.0), and (5,16.5)(5, 16.5). Based on the mathematical structure and rate of change exhibited by the data, determine whether a linear, quadratic, or exponential model is the most appropriate representation of H(t)H(t). Then, write the explicit predictive equation for the chosen model type.

Answer and steps

Final answer

Model type: Linear; Predictive equation: H(t)=2.5t+4.0H(t) = 2.5t + 4.0

Steps

01

Analyze the Pattern of Change

To determine the appropriate model, examine how the stalk's height H(t)H(t) changes over consecutive, equal time increments of Δt=1 day\Delta t = 1\text{ day}:

  • From t=0t = 0 to t=1t = 1: ΔH=6.5−4.0=2.5 cm\Delta H = 6.5 - 4.0 = 2.5\text{ cm}
  • From t=1t = 1 to t=2t = 2: ΔH=9.0−6.5=2.5 cm\Delta H = 9.0 - 6.5 = 2.5\text{ cm}
  • From t=2t = 2 to t=3t = 3: ΔH=11.5−9.0=2.5 cm\Delta H = 11.5 - 9.0 = 2.5\text{ cm}
  • From t=3t = 3 to t=4t = 4: ΔH=14.0−11.5=2.5 cm\Delta H = 14.0 - 11.5 = 2.5\text{ cm}
  • From t=4t = 4 to t=5t = 5: ΔH=16.5−14.0=2.5 cm\Delta H = 16.5 - 14.0 = 2.5\text{ cm}
02

Select the Model Type

  • Linear Model: Characterized by constant first differences (a constant additive rate of change ΔHΔt\frac{\Delta H}{\Delta t}).
  • Quadratic Model: Characterized by constant second differences.
  • Exponential Model: Characterized by constant multiplicative ratios (H(t+1)H(t)\frac{H(t+1)}{H(t)}).

Because the first differences are strictly constant (ΔH=2.5 cm\Delta H = 2.5\text{ cm} for every 1-day1\text{-day} increase), the rate of change is constant. Therefore, a linear model is the most appropriate representation.

Common Pitfall: Do not confuse an additive pattern with an exponential pattern. An exponential model requires consecutive outputs to have a constant quotient (ratio), whereas here 6.54.0=1.625≠9.06.5≈1.385\frac{6.5}{4.0} = 1.625 \neq \frac{9.0}{6.5} \approx 1.385.

03

Formulate the Explicit Predictive Equation

A linear function has the standard form: H(t)=mt+bH(t) = mt + b

where:

  • mm is the constant rate of change (slope): m=ΔHΔt=2.51=2.5m = \frac{\Delta H}{\Delta t} = \frac{2.5}{1} = 2.5
  • bb is the initial value (HH-intercept at t=0t = 0): b=H(0)=4.0b = H(0) = 4.0

Substitute mm and bb into the equation: H(t)=2.5t+4.0H(t) = 2.5t + 4.0

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses a constant additive increase with a constant multiplicative factor and models the growth exponentially.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Growth rate=6.54.0=1.625\text{Growth rate} = \frac{6.5}{4.0} = 1.625

    Correct

    Δ\Delta H_1 = 6.5 - 4.0 = 2.5,; Δ\Delta H_2 = 9.0 - 6.5 = 2.5

    You calculated the quotient of the first two outputs rather than checking consecutive differences. When evaluating data with equally spaced inputs, check whether successive values change by a constant added difference or by a constant multiplying ratio across all points.

  2. Step 2

    The data grows rapidly over time, so an exponential model is most appropriate.\text{The data grows rapidly over time, so an exponential model is most appropriate.}

    Correct

    \text{Because the first differences are constant (}$$\Delta H = 2.5$\text{), a linear model is most appropriate.}$$

    The phrase 'grows rapidly' is subjective and does not mathematically confirm exponential growth. Comparing further ratios shows 9.06.5≈1.385≠1.625\frac{9.0}{6.5} \approx 1.385 \neq 1.625, while the first differences are strictly constant at +2.5+2.5, which indicates a linear relationship.

  3. Step 3

    Initial value \text{Initial value } a = 4.0   ⟹  \implies Base \text{Base } b = 1.625   ⟹  \implies H(t) = 4.0(1.625)^t

    Correct

    H(t) = 2.5t + 4.0

    Because the relationship is linear with a constant slope m=2.5m = 2.5 and initial value H(0)=4.0H(0) = 4.0, the predictive equation is H(t)=2.5t+4.0H(t) = 2.5t + 4.0 rather than an exponential function.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the initial value at t=0t = 0 is 4.04.0.

You structured an exponential equation correctly according to the standard form y=a⋅bty = a \cdot b^t using your calculated parameters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Model selection: additive vs. multiplicative change

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on a single ratio H(1)H(0)\frac{H(1)}{H(0)} and an informal description of growth rather than testing whether consecutive differences or consecutive ratios remain constant across the entire dataset.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant differences vs. constant ratios
  • For equally spaced inputs: constant first differences indicate a linear model (y=mx+by = mx + b), whereas constant successive quotients indicate an exponential model (y=a⋅bxy = a \cdot b^x).

  • Compute at least two consecutive differences (yk+1−yky_{k+1} - y_k) and two consecutive ratios (yk+1yk\frac{y_{k+1}}{y_k}) to verify which pattern holds across the whole table.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the consecutive first differences for equal increments of Δt=1\Delta t = 1: 6.5−4.0=2.56.5 - 4.0 = 2.5, 9.0−6.5=2.59.0 - 6.5 = 2.5, 11.5−9.0=2.511.5 - 9.0 = 2.5, 14.0−11.5=2.514.0 - 11.5 = 2.5, and 16.5−14.0=2.516.5 - 14.0 = 2.5.

  2. Since the first differences are constant, conclude that the data exhibits a constant rate of change and must be modeled by a linear function H(t)=mt+bH(t) = mt + b.

  3. Identify the slope m=ΔHΔt=2.5m = \frac{\Delta H}{\Delta t} = 2.5 and the vertical intercept b=H(0)=4.0b = H(0) = 4.0.

  4. Write the explicit predictive equation: H(t)=2.5t+4.0H(t) = 2.5t + 4.0.

Final answer

Model type: Linear; Predictive equation: H(t)=2.5t+4.0H(t) = 2.5t + 4.0

NEXT STEPS
Final Takeaways from Your Teacher
  • Always compute at least two consecutive differences before assuming a model is non-linear.

  • Check that a ratio remains constant across several pairs of points before choosing an exponential model.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the slope by dividing the first non-zero height by its corresponding day rather than calculating the difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    6.5−4.0=2.5  ⟹  9.0−6.5=2.5  ⟹  Differences are constant, so the model is linear.6.5 - 4.0 = 2.5 \implies 9.0 - 6.5 = 2.5 \implies \text{Differences are constant, so the model is linear.}

  2. Step 2

    Slope m=6.51=6.5\text{Slope } m = \frac{6.5}{1} = 6.5

    Correct

    m=ΔHΔt=6.5−4.01−0=2.5m = \frac{\Delta H}{\Delta t} = \frac{6.5 - 4.0}{1 - 0} = 2.5

    You divided the output H(1)=6.5H(1) = 6.5 by t=1t = 1 rather than computing the rate of change ΔHΔt\frac{\Delta H}{\Delta t}. Because the initial height at t=0t = 0 is 4.04.0, slope requires subtracting the initial value: 6.5−4.01−0=2.5\frac{6.5 - 4.0}{1 - 0} = 2.5.

  3. Step 3

    y-intercept b=4.0y\text{-intercept } b = 4.0

  4. Step 4

    H(t)=6.5t+4.0H(t) = 6.5t + 4.0

    Correct

    H(t)=2.5t+4.0H(t) = 2.5t + 4.0

    You assembled the slope-intercept form correctly, but your final equation carries over the incorrect slope m=6.5m = 6.5 from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly verified that the first differences of the outputs are constant.

You correctly concluded that constant first differences correspond to a linear model.

You correctly extracted the initial value b=4.0b = 4.0 from H(0)=4.0H(0) = 4.0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Slope vs. Coordinate Value Confusion

You divided the height at day 1 by the day number (6.5/16.5 / 1) rather than taking the difference from the initial height (6.5−4.06.5 - 4.0).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the ratio of coordinates yx\frac{y}{x} with the slope ΔyΔx\frac{\Delta y}{\Delta x} when the function does not pass through the origin (0,0)(0, 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Slope
  • m=ΔyΔx=y2−y1x2−x1m = \frac{\Delta y}{\Delta x} = \frac{y_2 - y_1}{x_2 - x_1}, not yx\frac{y}{x} (unless y1=0y_1 = 0 at x1=0x_1 = 0).

  • Always subtract two points: m=H(1)−H(0)1−0m = \frac{H(1) - H(0)}{1 - 0}.

First Difference as Slope
  • When Δt=1\Delta t = 1, the slope mm equals the constant first difference ΔH\Delta H.

  • Use the common difference you already calculated (2.52.5) directly as the slope.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of slope between (0,4.0)(0, 4.0) and (1,6.5)(1, 6.5): m=6.5−4.01−0=2.5m = \frac{6.5 - 4.0}{1 - 0} = 2.5.

  2. Substitute m=2.5m = 2.5 and b=4.0b = 4.0 into the linear form H(t)=mt+bH(t) = mt + b.

Final answer

H(t)=2.5t+4.0H(t) = 2.5t + 4.0

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that the constant first difference Δy\Delta y across an interval of Δx=1\Delta x = 1 is already your slope mm.

  • Double-check that evaluating your equation at t=1t = 1 matches the table: H(1)=2.5(1)+4.0=6.5H(1) = 2.5(1) + 4.0 = 6.5.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the role of the rate of change and the initial value when writing the linear function.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    6.5−4.0=2.5  ⟹  9.0−6.5=2.5  ⟹  Constant first difference means a linear model is best.6.5 - 4.0 = 2.5 \implies 9.0 - 6.5 = 2.5 \implies \text{Constant first difference means a linear model is best.}

  2. Step 2

    Rate of change=2.5  ⟹  Initial height=4.0\text{Rate of change} = 2.5 \implies \text{Initial height} = 4.0

  3. Step 3

    H(t)=4.0t+2.5H(t) = 4.0t + 2.5

    Correct

    H(t)=2.5t+4.0H(t) = 2.5t + 4.0

    In standard linear form H(t)=mt+bH(t) = mt + b, the rate of change mm is multiplied by the independent variable tt, while the initial value bb is the constant term. You placed the initial value 4.04.0 next to tt and the rate of change 2.52.5 as the constant.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the first differences to test for linearity.

You selected the linear model based on the constant rate of change.

You identified the correct values for both the rate of change (2.52.5) and the initial height (4.04.0).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Swapped slope and intercept in linear equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the placement of the rate of change (mm) and the starting value (bb) in the standard slope-intercept structure f(t)=mt+bf(t) = mt + b.

REASONING PATH
Your ACEpath teacher’s suggested approach
Connecting terms to physical units
  • The rate of change has units of outputinput\frac{\text{output}}{\text{input}} and must multiply the input variable; the initial value has units of the output and stands alone as a constant.

  • Check t=0t = 0: substituting t=0t = 0 into H(t)H(t) must yield the initial value 4.04.0, which confirms 4.04.0 is the standalone constant term bb.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the rate of change m=2.5m = 2.5 into the slope position: H(t)=2.5t+bH(t) = 2.5t + b.

  2. Substitute the initial height b=4.0b = 4.0 into the constant position: H(t)=2.5t+4.0H(t) = 2.5t + 4.0.

  3. Verify with t=1t = 1: H(1)=2.5(1)+4.0=6.5H(1) = 2.5(1) + 4.0 = 6.5, which matches the given data point.

Final answer

Model type: Linear; Predictive equation: H(t)=2.5t+4.0H(t) = 2.5t + 4.0

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the general form y=mt+by = mt + b before substituting numerical values.

  • Test your resulting equation by plugging in t=0t = 0 and t=1t = 1 to verify that your predicted values match the table.

Lock it in

Similar question

01

A chemist records the mass M(t)M(t) of a compound at hourly intervals: (0,12.0)(0, 12.0), (1,15.6)(1, 15.6), (2,19.2)(2, 19.2), (3,22.8)(3, 22.8). Determine whether the data is linear, quadratic, or exponential, and write the predictive equation for M(t)M(t).

Answer

Linear; M(t)=3.6t+12.0M(t) = 3.6t + 12.0. Consecutive first differences are constant: 15.6−12.0=3.615.6 - 12.0 = 3.6, 19.2−15.6=3.619.2 - 15.6 = 3.6, and 22.8−19.2=3.622.8 - 19.2 = 3.6, giving slope m=3.6m = 3.6 and intercept M(0)=12.0M(0) = 12.0.

02

A population of yeast cells P(t)P(t) is measured every two hours: (0,50)(0, 50), (2,150)(2, 150), (4,450)(4, 450), (6,1350)(6, 1350). Determine whether the data is best represented by a linear or exponential model, and write the explicit equation for P(t)P(t) where tt is in hours.

Answer

Exponential; P(t)=50(3)t/2P(t) = 50(3)^{t/2} or P(t)=50(3)tP(t) = 50(\sqrt{3})^t. The successive ratios over equal time intervals of Δt=2\Delta t = 2 are constant: 15050=3\frac{150}{50} = 3, 450150=3\frac{450}{150} = 3, 1350450=3\frac{1350}{450} = 3.

03

A water tank leaks such that the remaining volume V(t)V(t) (in liters) after tt hours is recorded as: (0,100)(0, 100), (1,80)(1, 80), (2,65)(2, 65), (3,55)(3, 55), (4,50)(4, 50). Show whether this data is best modeled by a linear, quadratic, or exponential function by analyzing successive differences, and state the appropriate model type.

Answer

Quadratic. First differences are ΔV=−20,−15,−10,−5\Delta V = -20, -15, -10, -5. Second differences are Δ2V=5,5,5\Delta^2 V = 5, 5, 5 (strictly constant). Because the second differences are constant while first differences and ratios vary, a quadratic model is the most appropriate representation.

Loading workspace…