Resources

A physical chemist analyzes a chemical reaction where the reactant concentration yy is recorded across equally spaced intervals of an independent variable x=1,2,3,4x = 1, 2, 3, 4. The measured values are y1=12.00y_1 = 12.00, y2=18.00y_2 = 18.00, y3=26.00y_3 = 26.00, and y4=36.00y_4 = 36.00. To determine whether the system is governed by a quadratic rate law (y=ax2+bx+cy = ax^2 + bx + c) or an exponential accumulation law (y=abxy = a b^x), compute both the successive first differences Δyn=yn+1−yn\Delta y_n = y_{n+1} - y_n with second differences Δ2yn\Delta^2 y_n, and the successive consecutive ratios rn=yn+1ynr_n = \frac{y_{n+1}}{y_n}. Identify which exact model structure holds identically across the domain and provide the constant characteristic metric that confirms your selection.

Answer and steps

Final answer

Model type: Quadratic; Justification: The second differences are strictly constant with Δ2y1=Δ2y2=2.00\Delta^2 y_1 = \Delta^2 y_2 = 2.00 (whereas consecutive ratios 1.50,1.444,1.3851.50, 1.444, 1.385 are not constant); Model equation: y=x2+3x+8y = x^2 + 3x + 8

Steps

01

Calculate Successive Differences

To determine whether the relationship follows a quadratic law or an exponential law, we examine how the dependent variable yy behaves over equally spaced intervals of xx (Δx=1\Delta x = 1).

For a polynomial of degree 22 (quadratic model), the first differences change at a linear rate, and the second differences must be constant:

  • First Differences (Δyn=yn+1−yn\Delta y_n = y_{n+1} - y_n): Δy1=y2−y1=18.00−12.00=6.00\Delta y_1 = y_2 - y_1 = 18.00 - 12.00 = 6.00 Δy2=y3−y2=26.00−18.00=8.00\Delta y_2 = y_3 - y_2 = 26.00 - 18.00 = 8.00 Δy3=y4−y3=36.00−26.00=10.00\Delta y_3 = y_4 - y_3 = 36.00 - 26.00 = 10.00
  • Second Differences (Δ2yn=Δyn+1−Δyn\Delta^2 y_n = \Delta y_{n+1} - \Delta y_n): Δ2y1=Δy2−Δy1=8.00−6.00=2.00\Delta^2 y_1 = \Delta y_2 - \Delta y_1 = 8.00 - 6.00 = 2.00 Δ2y2=Δy3−Δy2=10.00−8.00=2.00\Delta^2 y_2 = \Delta y_3 - \Delta y_2 = 10.00 - 8.00 = 2.00

The second differences are strictly constant with a value of 2.002.00.


02

Calculate Consecutive Ratios

For an exponential model (y=abxy = a b^x), consecutive terms must have a constant common ratio r=yn+1yn=br = \frac{y_{n+1}}{y_n} = b:

r1=y2y1=18.0012.00=1.500r_1 = \frac{y_2}{y_1} = \frac{18.00}{12.00} = 1.500 r2=y3y2=26.0018.00≈1.444r_2 = \frac{y_3}{y_2} = \frac{26.00}{18.00} \approx 1.444 r3=y4y3=36.0026.00≈1.385r_3 = \frac{y_4}{y_3} = \frac{36.00}{26.00} \approx 1.385

Because the ratios decrease as xx increases, the relation is not exponential.


03

Determine the Model Equation

Since the constant second difference confirms a quadratic model y=ax2+bx+cy = ax^2 + bx + c, we relate the differences to the coefficients:

  • For a quadratic function with unit spacing (Δx=1\Delta x = 1), the constant second difference satisfies: Δ2y=2a  ⟹  2a=2.00  ⟹  a=1\Delta^2 y = 2a \implies 2a = 2.00 \implies a = 1
  • Using the data points at x=1x = 1 and x=2x = 2: {1(1)2+b(1)+c=12  ⟹  b+c=11,1(2)2+b(2)+c=18  ⟹  2b+c=14\lbrace 1(1)^2 + b(1) + c = 12 \implies b + c = 11,\quad 1(2)^2 + b(2) + c = 18 \implies 2b + c = 14
  • Subtracting the first equation from the second: (2b+c)−(b+c)=14−11  ⟹  b=3(2b + c) - (b + c) = 14 - 11 \implies b = 3 c=11−3=8c = 11 - 3 = 8

Thus, the exact quadratic rate law is: y=x2+3x+8y = x^2 + 3x + 8

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student checks only the first ratio and incorrectly assumes a constant multiplier rather than checking constancy across the entire domain.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δy1=18−12=6  ⟹  Δy2=26−18=8  ⟹  Δy3=36−26=10\Delta y_1 = 18 - 12 = 6 \implies \Delta y_2 = 26 - 18 = 8 \implies \Delta y_3 = 36 - 26 = 10

  2. Step 2

    Δ2y1=8−6=2  ⟹  Δ2y2=10−8=2\Delta^2 y_1 = 8 - 6 = 2 \implies \Delta^2 y_2 = 10 - 8 = 2

  3. Step 3

    r1=1812=1.5  ⟹  r2=2618≈1.44  ⟹  r3=3626≈1.38r_1 = \frac{18}{12} = 1.5 \implies r_2 = \frac{26}{18} \approx 1.44 \implies r_3 = \frac{36}{26} \approx 1.38

  4. Step 4

    The system follows an exponential accumulation law y=abxy = a b^x because the base growth factor is r1=1.5r_1 = 1.5.

    Correct

    The system follows a quadratic rate law y=ax2+bx+cy = ax^2 + bx + c because the second differences are strictly constant across the domain (Δ2yn=2.00\Delta^2 y_n = 2.00), whereas the ratios rnr_n are not constant.

    An exponential model requires the ratio yn+1yn\frac{y_{n+1}}{y_n} to remain constant across all intervals, but here the ratios decrease (1.50→1.44→1.381.50 \to 1.44 \to 1.38). In contrast, the second differences are strictly constant at Δ2y=2.00\Delta^2 y = 2.00, confirming a quadratic model.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the first differences Δyn\Delta y_n and second differences Δ2yn\Delta^2 y_n.

You accurately evaluated the consecutive ratios rnr_n across the data points.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Premature model selection from single-interval ratio

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the initial ratio r1=1.5r_1 = 1.5 to declare an exponential model without requiring that the ratio remain constant across all successive intervals, overlooking that the second differences are identically constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Model Identification from Discrete Data
  • A model structure applies only when its characteristic invariant holds for all successive intervals across the domain: constant Δy\Delta y implies linear, constant Δ2y\Delta^2 y implies quadratic, and constant ratio r=yn+1ynr = \frac{y_{n+1}}{y_n} implies exponential.

  • Compare all values in each sequence; select the model whose characteristic metric is uniform across every interval.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Inspect the calculated second differences: Δ2y1=2\Delta^2 y_1 = 2 and Δ2y2=2\Delta^2 y_2 = 2.

  2. Inspect the calculated consecutive ratios: r1=1.5r_1 = 1.5, r2≈1.44r_2 \approx 1.44, and r3≈1.38r_3 \approx 1.38.

  3. Observe that the second differences are strictly constant, whereas the consecutive ratios vary across intervals.

  4. Conclude that the data follows a quadratic rate law y=ax2+bx+cy = ax^2 + bx + c with characteristic metric Δ2y=2.00\Delta^2 y = 2.00.

Final answer

Model type: Quadratic; Characteristic metric: Strictly constant second differences Δ2y=2.00\Delta^2 y = 2.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify whether a candidate metric is identical across all calculated steps before choosing a model family.

  • Practice writing down the invariance condition for each model type (constant Δy\Delta y for linear, constant Δ2y\Delta^2 y for quadratic, constant ratio rr for exponential).

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies constant second differences as indicating an exponential model due to confusing quadratic finite differences with exponential growth rates.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δy1=18.00−12.00=6.00  ⟹  Δy2=26.00−18.00=8.00  ⟹  Δy3=36.00−26.00=10.00\Delta y_1 = 18.00 - 12.00 = 6.00 \implies \Delta y_2 = 26.00 - 18.00 = 8.00 \implies \Delta y_3 = 36.00 - 26.00 = 10.00

  2. Step 2

    Δ2y1=8.00−6.00=2.00  ⟹  Δ2y2=10.00−8.00=2.00\Delta^2 y_1 = 8.00 - 6.00 = 2.00 \implies \Delta^2 y_2 = 10.00 - 8.00 = 2.00

  3. Step 3

    r1=18.00/12.00=1.50  ⟹  r2=26.00/18.00=1.44  ⟹  r3=36.00/26.00=1.38r_1 = 18.00 / 12.00 = 1.50 \implies r_2 = 26.00 / 18.00 = 1.44 \implies r_3 = 36.00 / 26.00 = 1.38

  4. Step 4

    "Because the second differences increase at a steady value of Δ2y=2.00\Delta^2 y = 2.00, the reaction shows accelerating exponential growth y=abxy = ab^x with constant rate metric 2.002.00."

    Correct

    Model: Quadratic (y=ax2+bx+cy = ax^2 + bx + c); Metric: Constant second differences Δ2yn=2.00\Delta^2 y_n = 2.00

    Constant second finite differences characterize a polynomial of degree 2 (quadratic model), not an exponential model. An exponential model y=abxy = ab^x requires constant consecutive ratios rn=br_n = b, which your own calculations showed are decreasing (1.50,1.44,1.381.50, 1.44, 1.38).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated all first differences Δyn\Delta y_n across the consecutive intervals.

You correctly evaluated the second differences Δ2yn\Delta^2 y_n and verified that they equal 2.002.00.

You correctly computed the successive ratios rn=yn+1ynr_n = \frac{y_{n+1}}{y_n}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Model identification from finite differences

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated constant second differences with exponential growth, confusing polynomial finite-difference behavior with the multiplicative ratio property of exponential functions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Finite Differences vs. Common Ratios
  • For equally spaced inputs: constant first differences indicate a linear model (y=mx+by = mx + b); constant second differences indicate a quadratic model (y=ax2+bx+cy = ax^2 + bx + c); constant consecutive ratios indicate an exponential model (y=abxy = ab^x).

  • Always check which metric is invariant: if differences are constant at order kk, the function is a polynomial of degree kk; if ratios are constant, it is exponential.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that the consecutive ratios r1=1.50r_1 = 1.50, r2≈1.44r_2 \approx 1.44, and r3≈1.38r_3 \approx 1.38 are not constant, which rules out an exponential model.

  2. Observe that the second differences are strictly constant: Δ2y1=Δ2y2=2.00\Delta^2 y_1 = \Delta^2 y_2 = 2.00.

  3. Conclude that the relationship is governed by a quadratic model y=ax2+bx+cy = ax^2 + bx + c with constant characteristic metric Δ2y=2.00\Delta^2 y = 2.00 (where 2a=2.00  ⟹  a=12a = 2.00 \implies a = 1).

Final answer

Model type: Quadratic (y=ax2+bx+cy = ax^2 + bx + c); Constant characteristic metric: Δ2y=2.00\Delta^2 y = 2.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between additive growth signatures (finite differences for polynomials) and multiplicative growth signatures (quotients for exponentials).

  • Practice matching discrete tabular data to linear, quadratic, and exponential model types based on which column yields a constant value.

Lock it in

Similar question

01

For equally spaced inputs x=1,2,3,4x = 1, 2, 3, 4, the outputs are y=4,12,36,108y = 4, 12, 36, 108. Determine whether the relationship is quadratic or exponential, and state the governing constant metric.

Answer

Exponential model. Successive ratios are r1=124=3r_1 = \frac{12}{4} = 3, r2=3612=3r_2 = \frac{36}{12} = 3, r3=10836=3r_3 = \frac{108}{36} = 3. Because the ratio is strictly constant across the entire domain with r=3r = 3, the model is exponential (y=43⋅3xy = \frac{4}{3} \cdot 3^x).

02

A data set records y=5,9,17,29y = 5, 9, 17, 29 at x=1,2,3,4x = 1, 2, 3, 4. Compute the first differences, second differences, and consecutive ratios to decide whether the data is best modeled by a quadratic or an exponential function.

Answer

Quadratic model. First differences are 4,8,124, 8, 12; second differences are 8−4=48 - 4 = 4 and 12−8=412 - 8 = 4 (constant). Consecutive ratios are 95=1.8\frac{9}{5} = 1.8, 179≈1.89\frac{17}{9} \approx 1.89, 2917≈1.71\frac{29}{17} \approx 1.71 (not constant). The strictly constant second difference Δ2y=4\Delta^2 y = 4 confirms a quadratic model (y=2x2−2x+5y = 2x^2 - 2x + 5).

03

At x=0,1,2,3x = 0, 1, 2, 3, an experimental variable has values y=3,7,13,22y = 3, 7, 13, 22. A student claims the data is quadratic because Δy1=4\Delta y_1 = 4 and Δy2=6\Delta y_2 = 6 give Δ2y1=2\Delta^2 y_1 = 2. Evaluate the student's claim by checking the remaining interval.

Answer

The claim is incorrect. The third first difference is Δy3=22−13=9\Delta y_3 = 22 - 13 = 9, which gives Δ2y2=9−6=3\Delta^2 y_2 = 9 - 6 = 3. Because Δ2y1=2≠Δ2y2=3\Delta^2 y_1 = 2 \neq \Delta^2 y_2 = 3, the second difference is not constant across the domain, so the function cannot be exactly quadratic.

Loading workspace…