Resources

A damped mechanical harmonic oscillator is governed by the differential-algebraic characteristic model mr2+γr+k=0m r^2 + \gamma r + k = 0. For a system with mass m=2 kgm = 2\text{ kg}, damping coefficient γ=7 N⋅s/m\gamma = 7\text{ N}\cdot\text{s/m}, and spring stiffness k=3 N/mk = 3\text{ N/m}, two characteristic decay rates r1=−3 s−1r_1 = -3\text{ s}^{-1} and r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} are proposed. Furthermore, the steady-state amplitude must satisfy the boundary condition A(t)=A0ert≤0.05A0A(t) = A_0 e^{rt} \le 0.05 A_0 at t=2 st = 2\text{ s}. Determine: (a) whether both r1r_1 and r2r_2 satisfy the characteristic algebraic equation, and (b) whether the less negative root r2r_2 satisfies the amplitude threshold requirement at t=2 st = 2\text{ s}.

Answer and steps

Final answer

(a) Yes, both r1=−3 s−1r_1 = -3\text{ s}^{-1} and r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} satisfy 2r2+7r+3=(2r+1)(r+3)=02r^2 + 7r + 3 = (2r + 1)(r + 3) = 0; (b) No, r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} fails the amplitude threshold requirement because e−0.5(2)=e−1≈0.368>0.05e^{-0.5(2)} = e^{-1} \approx 0.368 > 0.05.

Steps

Part (a): Verifying the Roots of the Characteristic Equation

  1. Substitute the given physical parameters into the equation: The characteristic equation is: mr2+γr+k=0m r^2 + \gamma r + k = 0 Substituting m=2m = 2, γ=7\gamma = 7, and k=3k = 3 gives: 2r2+7r+3=02r^2 + 7r + 3 = 0
  2. Test the first candidate, r1=−3r_1 = -3: Substitute r=−3r = -3 into the left-hand side: 2(−3)2+7(−3)+3=2(9)−21+3=18−21+3=02(-3)^2 + 7(-3) + 3 = 2(9) - 21 + 3 = 18 - 21 + 3 = 0 Since the left-hand side equals 00, r1=−3 s−1r_1 = -3\text{ s}^{-1} satisfies the equation.
  3. Test the second candidate, r2=−0.5=−12r_2 = -0.5 = -\frac{1}{2}: Substitute r=−0.5r = -0.5 into the left-hand side: 2(−0.5)2+7(−0.5)+3=2(0.25)−3.5+3=0.5−3.5+3=02(-0.5)^2 + 7(-0.5) + 3 = 2(0.25) - 3.5 + 3 = 0.5 - 3.5 + 3 = 0 Since the left-hand side equals 00, r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} also satisfies the equation.

    Alternatively, factoring the quadratic confirms both roots at once: 2r2+7r+3=(2r+1)(r+3)=0  ⟹  r=−0.5 or r=−32r^2 + 7r + 3 = (2r + 1)(r + 3) = 0 \implies r = -0.5 \text{ or } r = -3

Therefore, both r1r_1 and r2r_2 satisfy the characteristic equation.


Part (b): Checking the Amplitude Threshold Requirement for r2r_2

  1. Set up the amplitude inequality: The boundary condition requires that the amplitude drops to at most 5%5\% of its initial value A0A_0 at time t=2 st = 2\text{ s}: A(2)≤0.05A0A(2) \le 0.05 A_0 Substituting the model A(t)=A0ertA(t) = A_0 e^{rt}: A0e2r≤0.05A0A_0 e^{2r} \le 0.05 A_0 Dividing both sides by A0A_0 (A0>0A_0 > 0): e2r≤0.05e^{2r} \le 0.05
  2. Evaluate the ratio for r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} at t=2 st = 2\text{ s}: e2(−0.5)=e−1=1e≈0.368e^{2(-0.5)} = e^{-1} = \frac{1}{e} \approx 0.368
  3. Compare with the required threshold: 0.368>0.050.368 > 0.05 The remaining amplitude at t=2 st = 2\text{ s} is approximately 36.8%36.8\% of A0A_0, which is significantly greater than the maximum permitted threshold of 5%5\% (0.050.05).

Therefore, r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} does not satisfy the amplitude threshold requirement.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the negative sign in the exponent, calculating e^(+1) instead of e^(-1) and concluding the requirement is not met based on exponential growth.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2(−3)2+7(−3)+3=18−21+3=02(-3)^2 + 7(-3) + 3 = 18 - 21 + 3 = 0 ⟹ 2(−0.5)2+7(−0.5)+3=0.5−3.5+3=02(-0.5)^2 + 7(-0.5) + 3 = 0.5 - 3.5 + 3 = 0 ⟹ Both r1r_1 and r2r_2 satisfy the equation.

  2. Step 2

    A(2)A0=ert=e0.5⋅2=e1≈2.718\frac{A(2)}{A_0} = e^{rt} = e^{0.5 \cdot 2} = e^1 \approx 2.718

    Correct

    A(2)A0=e(−0.5)(2)=e−1=1e≈0.368\frac{A(2)}{A_0} = e^{(-0.5)(2)} = e^{-1} = \frac{1}{e} \approx 0.368

    You substituted r=0.5r = 0.5 instead of r2=−0.5r_2 = -0.5. Because r2r_2 is negative, the exponent should be (−0.5)(2)=−1(-0.5)(2) = -1, giving e−1≈0.368e^{-1} \approx 0.368 rather than e1≈2.718e^1 \approx 2.718.

  3. Step 3

    2.718>0.052.718 > 0.05 ⟹ r2r_2 does not satisfy the requirement because the amplitude grows.

    Correct

    0.368>0.05  ⟹  r20.368 > 0.05 \implies r_2 does not satisfy the requirement because the amplitude remains at approximately 36.8%36.8\%, exceeding the 5%5\% threshold.

    While your final conclusion that r2r_2 fails the threshold is technically correct, your physical reasoning is flawed because the amplitude is actually decaying toward zero, not growing.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately substituted both root candidates into the quadratic characteristic equation.

You performed the arithmetic correctly to show both expressions evaluate to zero.

You correctly recognized that the ratio A(2)A0\frac{A(2)}{A_0} must be compared against 0.050.05.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dropped Negative Sign in Exponent

You omitted the negative sign when substituting r2=−0.5r_2 = -0.5 into the exponent rtrt, writing e0.5⋅2e^{0.5 \cdot 2} instead of e−0.5⋅2e^{-0.5 \cdot 2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing decay rate notation (r=−0.5r = -0.5) with positive time constant magnitudes, leading to an accidental sign omission that turned physical exponential decay into exponential growth.

REASONING PATH
Your ACEpath teacher’s suggested approach
Preserve the Sign of Rate Parameters
  • For decay processes modeled by erte^{rt}, a negative root r<0r < 0 must retain its negative sign upon substitution.

  • Always write parentheses around substituted negative parameters, such as e(−0.5)(2)e^{(-0.5)(2)}, before multiplying.

Physical Reality Check
  • A damped passive oscillator must lose energy over time, so the amplitude ratio A(t)A0\frac{A(t)}{A_0} must be strictly less than 11 for t>0t > 0.

  • If your calculated amplitude ratio exceeds 11 in a damped system, pause and check for a lost negative sign in the exponent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} and t=2 st = 2\text{ s} into A(t)A0=ert\frac{A(t)}{A_0} = e^{rt}:

  2. A(2)A0=e(−0.5)(2)=e−1=1e≈0.368\frac{A(2)}{A_0} = e^{(-0.5)(2)} = e^{-1} = \frac{1}{e} \approx 0.368

  3. Compare the calculated decay fraction with the threshold 0.050.05:

  4. 0.368>0.050.368 > 0.05

  5. Conclude based on the actual decay: at t=2 st = 2\text{ s}, the amplitude has only decayed to 36.8%36.8\% of its initial value, which fails to reach the required ≤5%\le 5\% threshold.

Final answer

(a) Yes, both r1r_1 and r2r_2 satisfy the characteristic equation; (b) No, r2r_2 does not satisfy the requirement because e−1≈0.368>0.05e^{-1} \approx 0.368 > 0.05.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice substituting negative rates into exponential models by explicitly writing negative values in parentheses.

  • Perform a sanity check on physical decay problems: verify that ert≤1e^{rt} \le 1 whenever r<0r < 0 and t>0t > 0.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the less negative root r₂ with the more negative root r₁ and tests r = -3 instead of r = -0.5.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2(−3)2+7(−3)+3=18−21+3=02(-3)^2 + 7(-3) + 3 = 18 - 21 + 3 = 0 2(−0.5)2+7(−0.5)+3=0.5−3.5+3=02(-0.5)^2 + 7(-0.5) + 3 = 0.5 - 3.5 + 3 = 0 Both r1 and r2 satisfy the equation.\text{Both } r_1 \text{ and } r_2 \text{ satisfy the equation.}

  2. Step 2

    Using the root r=−3\text{Using the root } r = -3:

    Correct

    The less negative root is r2=−0.5 s−1 (since −0.5>−3).\text{The less negative root is } r_2 = -0.5\text{ s}^{-1} \text{ (since } -0.5 > -3\text{)}.

    You chose r=−3r = -3 instead of r=−0.5r = -0.5. "Less negative" means having a smaller negative magnitude (closer to zero on the number line), which corresponds to r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1}, whereas r=−3 s−1r = -3\text{ s}^{-1} is the more negative root.

  3. Step 3

    A(2)A0=e−3⋅2=e−6≈0.00248\frac{A(2)}{A_0} = e^{-3 \cdot 2} = e^{-6} \approx 0.00248 0.00248≤0.050.00248 \le 0.05 The root satisfies the amplitude threshold requirement.\text{The root satisfies the amplitude threshold requirement.}

    Correct

    A(2)A0=e(−0.5)(2)=e−1≈0.368\frac{A(2)}{A_0} = e^{(-0.5)(2)} = e^{-1} \approx 0.368 0.368>0.05  ⟹  r2 does not satisfy the amplitude requirement.0.368 > 0.05 \implies r_2 \text{ does not satisfy the amplitude requirement.}

    Your calculation with r=−3r = -3 is mathematically consistent, but evaluating the required root r2=−0.5r_2 = -0.5 gives e−1≈0.368e^{-1} \approx 0.368, which exceeds the 0.050.05 threshold.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted both roots into the characteristic equation to verify that they satisfy it.

You set up the amplitude ratio formula A(t)A0=ert\frac{A(t)}{A_0} = e^{rt} accurately.

You correctly evaluated the exponential decay value for your chosen rate and compared it against the threshold.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Root identification / Comparative terminology confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused "less negative" with "more negative" (or larger in absolute magnitude), selecting r=−3r = -3 instead of r=−0.5r = -0.5. On the real number line, −0.5-0.5 is closer to 00 and algebraically greater than −3-3, making it the less negative value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting 'Less Negative' vs. 'More Negative'
  • A number is 'less negative' if it lies closer to zero on the number line (i.e., it has a smaller absolute value among negative numbers: ∣−0.5∣<∣−3∣  ⟹  −0.5>−3|-0.5| < |-3| \implies -0.5 > -3).

  • Compare negative candidates on a number line before substituting; confirm that 'less negative' corresponds to the value algebraically closer to zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the less negative root between r1=−3 s−1r_1 = -3\text{ s}^{-1} and r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1}: since −0.5>−3-0.5 > -3, the less negative root is r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1}.

  2. Substitute r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} and t=2 st = 2\text{ s} into the amplitude ratio: A(2)A0=er2t=e(−0.5)(2)=e−1\frac{A(2)}{A_0} = e^{r_2 t} = e^{(-0.5)(2)} = e^{-1}.

  3. Evaluate the numerical value: e−1=1e≈0.368e^{-1} = \frac{1}{e} \approx 0.368.

  4. Compare with the maximum allowed threshold: 0.368>0.050.368 > 0.05, so the amplitude ratio exceeds 5%5\%.

Final answer

(a) Yes, both r1r_1 and r2r_2 satisfy the characteristic equation; (b) No, r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} does not satisfy the amplitude threshold requirement because e−1≈0.368>0.05e^{-1} \approx 0.368 > 0.05.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review comparative terminology for signed quantities such as 'less negative', 'more negative', and 'magnitude'.

  • Re-evaluate boundary conditions using the root that is closer to zero (r=−0.5 s−1r = -0.5\text{ s}^{-1}).

OverviewACEpath Teacher's Diagnosis

03 The student fails to square the negative sign correctly when evaluating r₁, writing (-3)² = -9, leading to the false conclusion that r₁ does not satisfy the equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2(−3)2+7(−3)+3=2(−9)−21+3=−18−21+3=−36≠02(-3)^2 + 7(-3) + 3 = 2(-9) - 21 + 3 = -18 - 21 + 3 = -36 \neq 0

    Correct

    2(−3)2+7(−3)+3=2(9)−21+3=18−21+3=02(-3)^2 + 7(-3) + 3 = 2(9) - 21 + 3 = 18 - 21 + 3 = 0

    When you square a negative number in parentheses, the result is positive: (−3)2=(−3)×(−3)=9(-3)^2 = (-3) \times (-3) = 9. Evaluating (−3)2(-3)^2 as −9-9 introduced a sign error.

  2. Step 2

    2(−0.5)2+7(−0.5)+3=0.5−3.5+3=02(-0.5)^2 + 7(-0.5) + 3 = 0.5 - 3.5 + 3 = 0

  3. Step 3

    Only r2r_2 satisfies the equation, so both do not satisfy it.

    Correct

    Both r1r_1 and r2r_2 satisfy the characteristic equation.

    Because of the calculation slip in evaluating r1r_1, your conclusion that only r2r_2 satisfies the equation was affected. Both roots actually satisfy it.

  4. Step 4

    A(2)/A0=e−0.5⋅2=e−1≈0.368  ⟹  0.368>0.05  ⟹  r2A(2)/A_0 = e^{-0.5 \cdot 2} = e^{-1} \approx 0.368 \implies 0.368 > 0.05 \implies r_2 does not satisfy the requirement.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted physical parameters into both algebraic models.

You successfully evaluated r2=−0.5r_2 = -0.5 in the quadratic characteristic equation.

You carried out the exponential decay evaluation and inequality comparison in part (b) accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Squaring Negative Base

You evaluated (−3)2(-3)^2 as −9-9 instead of +9+9.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating (−a)2(-a)^2 with −a2-a^2: squaring a negative number inside parentheses yields a positive product because a negative multiplied by a negative is positive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Parentheses and Exponents
  • (−x)2=(−x)⋅(−x)=+x2(-x)^2 = (-x) \cdot (-x) = +x^2, whereas −x2=−(x⋅x)=−x2-x^2 = -(x \cdot x) = -x^2.

  • Whenever substituting a negative value into a squared term, write it in parentheses and ensure the squared result is non-negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Square the negative base: (−3)2=9(-3)^2 = 9.

  2. Multiply by the coefficient: 2(9)=182(9) = 18.

  3. Compute the linear and constant terms: 7(−3)+3=−21+3=−187(-3) + 3 = -21 + 3 = -18.

  4. Combine all terms: 18−18=018 - 18 = 0, confirming r1=−3 s−1r_1 = -3\text{ s}^{-1} satisfies the equation.

  5. Conclude part (a): both r1r_1 and r2r_2 satisfy the equation.

Final answer

(a) Yes, both r1=−3 s−1r_1 = -3\text{ s}^{-1} and r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} satisfy the equation; (b) No, r2=−0.5 s−1r_2 = -0.5\text{ s}^{-1} does not satisfy the amplitude threshold requirement.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the order of operations for powers of signed numbers, specifically distinguishing (−x)n(-x)^n from −xn-x^n.

  • Practice evaluating quadratic polynomials with negative inputs before moving on to multi-part modeling problems.

Lock it in

Similar question

01

A cooling object follows the temperature difference model ΔT(t)=ΔT0ekt\Delta T(t) = \Delta T_0 e^{kt} with k=−0.2 min−1k = -0.2\text{ min}^{-1}. Determine whether the temperature difference drops to at most 40%40\% of its initial value at t=5 mint = 5\text{ min}.

Answer

Yes. At t=5 mint = 5\text{ min}, ΔT(5)ΔT0=e(−0.2)(5)=e−1≈0.368\frac{\Delta T(5)}{\Delta T_0} = e^{(-0.2)(5)} = e^{-1} \approx 0.368. Since 0.368≤0.400.368 \le 0.40 (36.8%≤40%36.8\% \le 40\%), it satisfies the condition.

02

An electrical RLC circuit has characteristic roots r1=−4 s−1r_1 = -4\text{ s}^{-1} and r2=−1 s−1r_2 = -1\text{ s}^{-1}. (a) Verify whether r2=−1 s−1r_2 = -1\text{ s}^{-1} satisfies s2+5s+4=0s^2 + 5s + 4 = 0. (b) Test if the envelope V(t)=V0er2tV(t) = V_0 e^{r_2 t} satisfies V(t)≤0.10V0V(t) \le 0.10 V_0 at t=3 st = 3\text{ s}.

Answer

(a) Yes, (−1)2+5(−1)+4=1−5+4=0(-1)^2 + 5(-1) + 4 = 1 - 5 + 4 = 0. (b) No; at t=3 st = 3\text{ s}, V(3)V0=e(−1)(3)=e−3≈0.0498≤0.10\frac{V(3)}{V_0} = e^{(-1)(3)} = e^{-3} \approx 0.0498 \le 0.10. Wait: 0.0498≤0.100.0498 \le 0.10, so it actually satisfies the requirement (4.98%≤10%4.98\% \le 10\%).

03

A pharmaceutical drug concentration satisfies C(t)=C0ektC(t) = C_0 e^{kt}. Two proposed elimination rate constants are k1=−0.8 h−1k_1 = -0.8\text{ h}^{-1} and k2=−0.3 h−1k_2 = -0.3\text{ h}^{-1}. A patient requires C(4)≤0.08C0C(4) \le 0.08 C_0. Determine which of the two rates (if any) satisfies this clearance criterion.

Answer

For k1=−0.8k_1 = -0.8: e(−0.8)(4)=e−3.2≈0.0408≤0.08e^{(-0.8)(4)} = e^{-3.2} \approx 0.0408 \le 0.08 (satisfies). For k2=−0.3k_2 = -0.3: e(−0.3)(4)=e−1.2≈0.301>0.08e^{(-0.3)(4)} = e^{-1.2} \approx 0.301 > 0.08 (fails). Therefore, only k1=−0.8 h−1k_1 = -0.8\text{ h}^{-1} satisfies the criterion.

Loading workspace…