Resources
An industrial wastewater treatment facility receives effluent with heavy metals. Stream A has a lead concentration of and Stream B has a lead concentration of . The plant must blend Stream A and Stream B to produce of blended wastewater with a final target concentration of . Given that , convert all concentrations into consistent units of , construct the system of linear equations modeling total volume and total dissolved lead mass, and solve for the required volume of each stream in liters.
Answer and steps
Final answer
Converting concentrations: Stream A is and Stream B is . Let and be the volumes in liters of Stream A and Stream B, respectively. The system of equations is: , which simplifies to . The solution is and .
Steps
Convert all concentrations to consistent units ()
The conversion factor given is .
- Stream A:
- Stream B:
- Target Blend:
Define variables and set up the system of linear equations
Let represent the volume of Stream A in liters, and let represent the volume of Stream B in liters.
- Total Volume Equation: The sum of the volumes of both streams must equal the total blended volume:
- Total Dissolved Lead Mass Equation: The mass of lead from Stream A plus the mass from Stream B equals the total lead mass in the blended mixture:
Thus, the system of equations is:
Common Pitfall: Forgetting to convert parts-per-million () into before multiplying by volume in liters causes an inconsistency by a factor of . Always check that all concentrations and volumes share matching base units.
Solve the system of equations
Express in terms of from the total volume equation:
Substitute this expression into the lead mass equation:
Expand and combine like terms:
Subtract from both sides:
Divide by :
Now find :
Stream A requires and Stream B requires .
Typical errors
01 The student forgets to multiply the target concentration by the total volume on the right-hand side of the mass balance equation, equating total dissolved lead mass directly to 0.068.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Stream A: 120 ppm = 0.12 g/L ⟹ Stream B: 40 ppm = 0.04 g/L
- Step 2
A + B = 25000
- Step 3
0.12A + 0.04B = 0.068
CorrectThe left side represents total mass in grams (), while the right side was written as just the target concentration . You must multiply the final target concentration by the total mixture volume to obtain total lead mass in grams.
- Step 4
B = 25000 - A ⟹ 0.12A + 0.04(25000 - A) = 0.068 ⟹ 0.08A + 1000 = 0.068 ⟹ 0.08A = -999.932
CorrectYour algebraic substitution and manipulation steps were carried out correctly, but the equation carried the incorrect constant term from the previous step.
- Step 5
A = -12499.15 L , B = 37499.15 L
CorrectThe resulting negative volume for stream is an impossible physical quantity caused by the missing volume factor on the right-hand side.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted to accurately using the given conversion factor.
You set up the volume balance equation correctly.
You executed the substitution method with correct algebraic mechanics.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the target concentration as total solute mass, equating a mass expression on the left-hand side with a concentration value on the right-hand side without multiplying by the total mixture volume.
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Check on Equation Terms
Every additive term across both sides of a balance equation must have identical physical units.
Check each term: . Therefore, the right side must also evaluate to grams: .
- Physical Reality Check
Physical mixture volumes cannot be negative.
If your solution yields a negative volume or a volume larger than the blended total, re-examine the right-hand side constants of your equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationExpand the expression: .
Combine like terms: .
Subtract from both sides: .
Divide by : .
Substitute back to find : .
02 The student misapplies the unit conversion factor by multiplying by 1000 instead of dividing by 1000, setting 120 ppm as 120000 g/L and 40 ppm as 40000 g/L.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Stream A: 120 1000 = 120000 40 1000 = 40000
CorrectStream A: 120 10^{-3} = 0.120 40 10^{-3} = 0.040
Because , you need to multiply the ppm value by (or divide by ). Multiplying by made the concentrations one million times larger than they actually are.
- Step 2
A + B = 25000 120000A + 40000B = 0.068 25000 120000A + 40000B = 1700
Correct\lbrace A + B = 25{,}000 , 0.120A + 0.040B = 1{,}700
Your system setup correctly matched volume conservation and lead mass conservation, but the equation inherited the inflated concentration values from Step 1.
- Step 3
B = 25000 - A 120000A + 40000(25000 - A) = 1700 80000A + 1000000000 = 1700 80000A = -999998300
CorrectB = 25{,}000 - A 0.120A + 0.040(25{,}000 - A) = 1{,}700 0.080A = 700
You executed substitution and algebraic simplification without any arithmetic slips on your numbers, but the inflated values led to an equation where the constant term overwhelmed the right-hand side.
- Step 4
A -12499.98, B 37499.98
CorrectA = 8{,}750, B = 16{,}250
Because of the earlier conversion error, your final volumes were physically impossible (a negative volume for Stream A). When working with physical quantities, a negative volume is a clear sign to revisit your initial units.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the two governing physical constraints: total volume conservation and total dissolved mass conservation.
You accurately substituted into your mass equation and performed correct multi-digit algebraic manipulation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of when converting from () to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInverting the conversion factor between smaller and larger metric units: milligrams are smaller than grams (), so moving from to requires dividing by , not multiplying.
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Magnitude Sanity Check
When converting a quantity from a smaller unit to a larger base unit, the numerical value must decrease.
Check whether should be a fraction of a gram or thousands of grams. Since , .
- Physical Reality Check
Blended volumes and concentrations in mixture problems must be non-negative and lie between the component extremes.
Verify that target concentration lies between Stream B () and Stream A (), meaning both volumes must be positive numbers between and .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert concentrations correctly: , and .
Set up the system: .
Substitute into the mass equation: .
Simplify: .
Find : .
Stream A requires and Stream B requires .
03 The student swaps the concentrations of Stream A and Stream B in the mass balance equation, resulting in inverted volume requirements.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You swapped the concentrations of the two streams: Stream A has a concentration of and Stream B has , but you multiplied by and by .
- Step 4Correct
Your algebraic substitution and linear equation solving steps were carried out correctly, but they inherited the reversed coefficients from Step 3.
- Step 5Correct
Because the coefficients were transposed in the mass balance equation, the calculated volumes for Stream A and Stream B ended up switched.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted concentration values from to accurately.
You set up the total volume relationship correctly.
You executed the substitution method and solved the resulting linear equation without algebraic errors.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned the concentration of Stream B () to variable and the concentration of Stream A () to variable .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn multi-stream mixture problems, defining variables verbally without explicitly pairing each variable with its associated rate or concentration on paper often leads to transposing coefficients during equation assembly.
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Rates to Variables
Every term in a solute mass equation must follow .
Write out the labeled product pairs explicitly, such as and , before assembling the equation.
- Target Concentration Sanity Check
If the target concentration is closer to Stream B than Stream A, the required mixture must contain more of Stream B.
Compare to the endpoints and : since is closer to , verify that before finalizing the answer.
CORRECTED PATH
ACEpath Teacher's DemonstrationPair each stream volume with its own concentration to write the correct mass equation:
Substitute into the corrected mass equation:
Expand and combine like terms:
Solve for :
Calculate :
Lock it in
In a mixture problem, what is the formula for the total mass of solute in the blended product?
. Never equate solute mass directly to concentration.
Similar question
A chemist mixes a acid solution with a acid solution to obtain of a acid solution. Set up the system of linear equations modeling the total liquid volume and total pure acid volume.
Answer
Let be the volume of the solution and be the volume of the solution. Total volume equation: . Pure acid equation: , which simplifies to .
A reservoir needs of saline solution at a concentration of . Two supply pipes deliver brine at and respectively. Find the required volume from each pipe.
Answer
of the brine and of the brine. Let and . Substituting yields , and .
An environmental engineer mixes Stream 1 ( contaminant) and Stream 2 ( contaminant) to produce with a target concentration of . Given , determine how many liters of Stream 1 are required.
Answer
of Stream 1. Convert concentrations: Stream 1 is and Stream 2 is . Set up the system: and . Substitute : .