Resources

A manufacturing facility produces standard and deluxe patio chairs. Each standard chair requires 1.5 hours1.5\text{ hours} of assembly and 0.5 hours0.5\text{ hours} of finishing, while each deluxe chair requires 2.5 hours2.5\text{ hours} of assembly and 1.0 hour1.0\text{ hour} of finishing. During a given production run, the plant has exactly 120120 labor-hours allocated to assembly and 4545 labor-hours allocated to finishing. Write the system of linear equations representing the exact, simultaneous boundary saturation of both labor capacities, and determine whether there exists a non-negative production schedule (s,d)(s, d) that exhausts both labor pools simultaneously with zero idle time.

Answer and steps

Final answer

Let ss and dd denote the number of standard and deluxe chairs produced, respectively. The system modeling boundary saturation is: {1.5s+2.5d=1200.5s+1.0d=45\begin{cases} 1.5s + 2.5d = 120 \\ 0.5s + 1.0d = 45 \end{cases}. Solving this system yields s=30s = 30 standard chairs and d=30d = 30 deluxe chairs. Since both values are non-negative integers, an exact boundary saturation schedule exists at (s,d)=(30,30)(s, d) = (30, 30).

Steps

01

Define the Variables

Let ss represent the number of standard chairs produced, and let dd represent the number of deluxe chairs produced.

02

Set Up the Equations for Each Resource

Each type of chair consumes hours from two distinct resource pools: assembly and finishing.

  1. Assembly Labor:

    • Each standard chair takes 1.5 hours1.5\text{ hours}.
    • Each deluxe chair takes 2.5 hours2.5\text{ hours}.
    • The total assembly time allocated is 120 hours120\text{ hours}.

    Equating total consumed assembly hours to total available assembly hours gives: 1.5s+2.5d=1201.5s + 2.5d = 120

  2. Finishing Labor:

    • Each standard chair takes 0.5 hours0.5\text{ hours}.
    • Each deluxe chair takes 1.0 hour1.0\text{ hour}.
    • The total finishing time allocated is 45 hours45\text{ hours}.

    Equating total consumed finishing hours to total available finishing hours gives: 0.5s+1.0d=450.5s + 1.0d = 45

Together, the system representing simultaneous capacity saturation is: {1.5s+2.5d=120,0.5s+1.0d=45\lbrace 1.5s + 2.5d = 120, \quad 0.5s + 1.0d = 45

03

Solve the System of Linear Equations

To eliminate ss, multiply the entire finishing equation by 33: 3(0.5s+1.0d)=3(45)  ⟹  1.5s+3.0d=1353(0.5s + 1.0d) = 3(45) \implies 1.5s + 3.0d = 135

Subtract the assembly equation from this new equation: (1.5s+3.0d)−(1.5s+2.5d)=135−120(1.5s + 3.0d) - (1.5s + 2.5d) = 135 - 120 0.5d=150.5d = 15 d=150.5=30d = \frac{15}{0.5} = 30

Substitute d=30d = 30 back into the finishing equation to solve for ss: 0.5s+1.0(30)=450.5s + 1.0(30) = 45 0.5s+30=450.5s + 30 = 45 0.5s=150.5s = 15 s=150.5=30s = \frac{15}{0.5} = 30

04

Verify Feasibility

In real-world manufacturing constraints, production quantities must be non-negative (s≥0s \ge 0, d≥0d \ge 0) and represent whole units. Since both s=30s = 30 and d=30d = 30 are non-negative integers, an exact boundary saturation schedule exists at (s,d)=(30,30)(s, d) = (30, 30), successfully utilizing all 120120 assembly hours and all 4545 finishing hours with zero idle time.

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student groups the coefficients by chair type rather than by labor constraint, creating an invalid system that sets chair hours equal to labor hours.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    1.5s + 0.5s = 120   ⟹  \implies 2.5d + 1.0d = 45

    Correct

    \lbrace 1.5s + 2.5d = 120,   0.5s + 1.0d = 45

    You grouped assembly hours and finishing hours for each chair type into separate equations. However, the totals of 120 hours120\text{ hours} and 45 hours45\text{ hours} represent separate resource pools shared by both chairs. The assembly equation must sum all assembly time (1.5s+2.5d=1201.5s + 2.5d = 120), and the finishing equation must sum all finishing time (0.5s+1.0d=450.5s + 1.0d = 45).

  2. Step 2

    2.0s = 120   ⟹  \implies s = 60   3.5d = 45   ⟹  \implies d = 453.5\frac{45}{3.5} = 907\frac{90}{7}

    Correct

    3(0.5s + 1.0d) = 1.5s + 3.0d = 135   ⟹  \implies 0.5d = 15   ⟹  \implies d = 30,   s = 30

    Your algebraic simplification and division were technically accurate for the equations you wrote, but solving uncoupled one-variable equations followed directly from the incorrect system setup.

  3. Step 3

    Since \text{Since } s = 60  and \text{ and } d = 907\frac{90}{7}  are non-negative, a non-negative schedule exists.\text{ are non-negative, a non-negative schedule exists.}

    Correct

    Since \text{Since } s = 30 ≥\ge 0  and \text{ and } d = 30 ≥\ge 0  are non-negative integers, an exact schedule exists at \text{ are non-negative integers, an exact schedule exists at } (s, d) = (30, 30).

    While your logical check for non-negativity was sound in principle, your conclusion was based on invalid production values resulting from the setup error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the variables ss and dd represent the two chair types.

You carried out your algebraic solving steps and fractions accurately without arithmetic errors.

You remembered to check whether the resulting solution satisfied the non-negativity feasibility condition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equation Setup by Item Instead of Resource

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You clustered the coefficients by product category rather than by shared resource constraint, treating each product as if it had its own separate total pool of hours.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit and Pool Alignment Check
  • Each linear constraint equation in a resource-allocation problem must equate total consumption of one specific resource to the total capacity of that same resource.

  • Label the total on the right side first (e.g., total assembly hours), then ensure every term added on the left side represents hours drawn from that exact same resource pool.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the assembly constraint by summing assembly hours from both chair types: 1.5s+2.5d=1201.5s + 2.5d = 120.

  2. Set up the finishing constraint by summing finishing hours from both chair types: 0.5s+1.0d=450.5s + 1.0d = 45.

  3. Multiply the finishing equation by 33 to align the ss-coefficients: 1.5s+3.0d=1351.5s + 3.0d = 135.

  4. Subtract the assembly equation from this result: (1.5s+3.0d)−(1.5s+2.5d)=135−120  ⟹  0.5d=15  ⟹  d=30(1.5s + 3.0d) - (1.5s + 2.5d) = 135 - 120 \implies 0.5d = 15 \implies d = 30.

  5. Substitute d=30d = 30 into 0.5s+1.0(30)=45  ⟹  0.5s=15  ⟹  s=300.5s + 1.0(30) = 45 \implies 0.5s = 15 \implies s = 30.

  6. Verify feasibility: both s=30s = 30 and d=30d = 30 are non-negative integers.

Final answer

\lbrace 1.5s + 2.5d = 120,   0.5s + 1.0d = 45;   (s, d) = (30, 30)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up a two-way data table (rows as resources, columns as items) before writing constraint equations.

  • Verify that every term along the left side of an equation shares the exact same physical measurement unit as the constant on the right side.

OverviewACEpath Teacher's Diagnosis

02 The student makes an elimination error by failing to multiply all terms in the second equation, concluding that no non-negative schedule exists.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    1.5s + 2.5d = 120,   0.5s + 1.0d = 45

  2. Step 2

    Multiply second equation by 3: \text{Multiply second equation by 3: } 1.5s + 3d = 45

    Correct

    3(0.5s + 1.0d) = 3(45)   ⟹  \implies 1.5s + 3.0d = 135

    When multiplying an equation by a scalar, you must multiply both sides. Multiplying the left side by 33 gave 1.5s+3d1.5s + 3d, but the right side was left as 4545 instead of 3×45=1353 \times 45 = 135.

  3. Step 3

    (1.5s + 3d) - (1.5s + 2.5d) = 45 - 120   ⟹  \implies 0.5d = -75   ⟹  \implies d = -150

    Correct

    (1.5s + 3.0d) - (1.5s + 2.5d) = 135 - 120   ⟹  \implies 0.5d = 15   ⟹  \implies d = 30

    Your subtraction and isolation logic followed correctly from your previous line, but the result was distorted by the unscaled right-hand side.

  4. Step 4

    0.5s + (-150) = 45   ⟹  \implies 0.5s = 195   ⟹  \implies s = 390

    Correct

    0.5s + 1.0(30) = 45   ⟹  \implies 0.5s = 15   ⟹  \implies s = 30

    You correctly substituted your calculated value of dd back into the original equation, but the propagated error produced s=390s = 390 instead of s=30s = 30.

  5. Step 5

    Since \text{Since } d = -150  is negative, no non-negative production schedule exists.\text{ is negative, no non-negative production schedule exists.}

    Correct

    A feasible schedule exists at \text{A feasible schedule exists at } (s, d) = (30, 30).

    Your reasoning that negative chair counts are physically impossible is sound, but because the true solution is (30,30)(30, 30), a valid non-negative production schedule does exist.

WHAT YOU DID WELL
Compliments from Your Teacher

You translated the word problem into two correct linear equations.

You selected a valid elimination strategy by targeting the ss variable.

You correctly interpreted that a real-world production schedule requires non-negative quantities.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplication Property of Equality Violation

You applied the multiplier 33 to the variable terms on the left side of 0.5s+1.0d=450.5s + 1.0d = 45, but omitted multiplying the right-hand constant 4545.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete application of the multiplication property of equality across parentheses when scaling an entire equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Use Explicit Parentheses
  • Multiplying an equation means multiplying both expressions: k⋅(LHS)=k⋅(RHS)k \cdot (\text{LHS}) = k \cdot (\text{RHS}).

  • Always write parentheses around both sides before multiplying: 3(0.5s+1.0d)=3(45)3(0.5s + 1.0d) = 3(45).

Reasonableness Check
  • Real-world manufacturing models with positive resource pools typically produce positive quantities.

  • If a standard linear production model yields an extreme negative quantity like −150-150, pause immediately to check for arithmetic or sign slips in elimination.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by 33: 3(0.5s+1.0d)=3(45)  ⟹  1.5s+3.0d=1353(0.5s + 1.0d) = 3(45) \implies 1.5s + 3.0d = 135.

  2. Subtract the first equation: (1.5s+3.0d)−(1.5s+2.5d)=135−120  ⟹  0.5d=15(1.5s + 3.0d) - (1.5s + 2.5d) = 135 - 120 \implies 0.5d = 15.

  3. Solve for dd: d=150.5=30d = \frac{15}{0.5} = 30.

  4. Substitute d=30d = 30 into 0.5s+1.0(30)=45  ⟹  0.5s=15  ⟹  s=300.5s + 1.0(30) = 45 \implies 0.5s = 15 \implies s = 30.

Final answer

An exact non-negative boundary saturation schedule exists at (s,d)=(30,30)(s, d) = (30, 30).

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice scaling linear equations by explicitly writing parentheses on both sides.

  • Re-solve the system using substitution to verify that both methods lead to (30,30)(30, 30).

  • Work through mixed word problems requiring feasibility checks on variable bounds.

OverviewACEpath Teacher's Diagnosis

03 The student swaps the assembly and finishing labor hour totals, leading to a negative value for the number of deluxe chairs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    1.5s + 2.5d = 45 \ 0.5s + 1.0d = 120

    Correct

    \lbrace 1.5s + 2.5d = 120,   0.5s + 1.0d = 45

    You correctly matched the assembly rates (1.51.5 and 2.52.5) and finishing rates (0.50.5 and 1.01.0), but you swapped their total available hours by setting assembly equal to 4545 and finishing equal to 120120 instead of 120120 and 4545.

  2. Step 2

    Multiply second equation by \text{Multiply second equation by } 3!: 1.5s + 3.0d = 360   ⟹  \implies Subtract first equation\text{Subtract first equation}!: 0.5d = 315   ⟹  \implies d = 630

    Correct

    3(0.5s + 1.0d) = 3(45)   ⟹  \implies 1.5s + 3.0d = 135   ⟹  \implies (1.5s + 3.0d) - (1.5s + 2.5d) = 135 - 120   ⟹  \implies 0.5d = 15   ⟹  \implies d = 30

    Your elimination logic was completely accurate for your written system, but the value of dd was affected by the swapped constants from Step 1.

  3. Step 3

    0.5s + 630 = 120   ⟹  \implies 0.5s = -510   ⟹  \implies s = -1020

    Correct

    0.5s + 1.0(30) = 45   ⟹  \implies 0.5s = 15   ⟹  \implies s = 30

    You substituted and solved for ss correctly based on your previous equations, but the negative value resulted from the initial constant swap.

  4. Step 4

    Since \text{Since } s = -1020  is negative, no non-negative production schedule exists.\text{ is negative, no non-negative production schedule exists.}

    Correct

    Since \text{Since } s = 30  and \text{ and } d = 30  are non-negative integers, an exact boundary saturation schedule exists at \text{ are non-negative integers, an exact boundary saturation schedule exists at } (s, d) = (30, 30).

    Your interpretation of non-negativity was logically sound, but because the correct solution is (30,30)(30, 30), a valid non-negative schedule does exist.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the hourly rate coefficients for both standard and deluxe chairs across assembly and finishing.

You carried out the elimination method flawlessly by scaling the second equation by 33 to eliminate ss.

You substituted your value of dd back into an equation and solved for ss with sound algebraic arithmetic.

You correctly evaluated the non-negativity constraint on production variables when interpreting your result.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Constant term assignment swap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You matched the variable coefficients by department correctly, but you paired the total available capacity of assembly with finishing and finishing with assembly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Label Each Equation by Resource
  • Every equation in a resource-allocation model represents exactly one resource pool: ∑(rate per unit)×(units)=total capacity of that resource\sum (\text{rate per unit}) \times (\text{units}) = \text{total capacity of that resource}.

  • Write the resource name (e.g., 'Assembly:' and 'Finishing:') before writing down the equation, and immediately place that resource's total on the right-hand side.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the system with the correct right-hand resource totals: {1.5s+2.5d=120,0.5s+1.0d=45\lbrace 1.5s + 2.5d = 120, \quad 0.5s + 1.0d = 45.

  2. Multiply the finishing equation by 33: 1.5s+3.0d=1351.5s + 3.0d = 135.

  3. Subtract the assembly equation: (1.5s+3.0d)−(1.5s+2.5d)=135−120  ⟹  0.5d=15  ⟹  d=30(1.5s + 3.0d) - (1.5s + 2.5d) = 135 - 120 \implies 0.5d = 15 \implies d = 30.

  4. Substitute d=30d = 30 into 0.5s+1.0(30)=45  ⟹  0.5s=15  ⟹  s=300.5s + 1.0(30) = 45 \implies 0.5s = 15 \implies s = 30.

Final answer

The system is {1.5s+2.5d=120,0.5s+1.0d=45\lbrace 1.5s + 2.5d = 120, \quad 0.5s + 1.0d = 45, and a non-negative schedule exists at (s,d)=(30,30)(s, d) = (30, 30).

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice building resource-allocation equations by explicitly setting up a two-way data table (rows = resources, columns = products, final column = total capacity).

  • Perform a sanity check on solutions: if a linear manufacturing problem yields an extreme negative quantity like −1020-1020, check whether constants or coefficients were swapped during setup.

Lock it in

Similar question

01

A bakery makes artisan loaves (xx) and baguettes (yy). Each loaf requires 4 cups4\text{ cups} of flour and 1 packet1\text{ packet} of yeast. Each baguette requires 3 cups3\text{ cups} of flour and 1 packet1\text{ packet} of yeast. The bakery has 110 cups110\text{ cups} of flour and 32 packets32\text{ packets} of yeast. Write the system of linear equations and find the non-negative production schedule (x,y)(x, y) that uses all ingredients exactly.

Answer

The system is {4x+3y=110,x+y=32\lbrace 4x + 3y = 110, \quad x + y = 32. Subtracting 3(x+y=32)3(x + y = 32) from the flour equation yields x=110−96=14x = 110 - 96 = 14. Then y=32−14=18y = 32 - 14 = 18. The production schedule is (x,y)=(14,18)(x, y) = (14, 18).

02

A tech workshop builds gaming rigs (gg) and office desktops (dd). Each gaming rig takes 3 hours3\text{ hours} of wiring and 2 hours2\text{ hours} of testing. Each office desktop takes 1 hour1\text{ hour} of wiring and 1.5 hours1.5\text{ hours} of testing. The workshop has 48 hours48\text{ hours} allocated for wiring and 44 hours44\text{ hours} for testing. Write the system of equations and determine if an exact boundary schedule exists with non-negative whole computers.

Answer

The system is {3g+1d=48,2g+1.5d=44\lbrace 3g + 1d = 48, \quad 2g + 1.5d = 44. From the first equation, d=48−3gd = 48 - 3g. Substitute into the second: 2g+1.5(48−3g)=44  ⟹  −2.5g+72=44  ⟹  2.5g=28  ⟹  g=11.22g + 1.5(48 - 3g) = 44 \implies -2.5g + 72 = 44 \implies 2.5g = 28 \implies g = 11.2. Since g=11.2g = 11.2 is not an integer, no exact whole-unit schedule exists.

03

A tailor produces vests (vv) and coats (cc). Each vest requires 1.2 m1.2\text{ m} of wool, 0.8 m0.8\text{ m} of lining, and 4 buttons4\text{ buttons}. Each coat requires 2.5 m2.5\text{ m} of wool, 2.0 m2.0\text{ m} of lining, and 6 buttons6\text{ buttons}. Available stock includes 49 m49\text{ m} of wool and 36 m36\text{ m} of lining. Write the two-variable system modeling complete wool and lining saturation, solve for (v,c)(v, c), and calculate how many buttons are needed for this exact run.

Answer

The system is {1.2v+2.5c=49,0.8v+2.0c=36\lbrace 1.2v + 2.5c = 49, \quad 0.8v + 2.0c = 36. Multiply the first by 44 and the second by 55: 4.8v+10c=1964.8v + 10c = 196 and 4.0v+10c=1804.0v + 10c = 180. Subtracting gives 0.8v=16  ⟹  v=200.8v = 16 \implies v = 20. Then 2.0c=36−0.8(20)=20  ⟹  c=102.0c = 36 - 0.8(20) = 20 \implies c = 10. Total buttons required: 4(20)+6(10)=140 buttons4(20) + 6(10) = 140\text{ buttons}.

Loading workspace…