Resources

In a physics laboratory experiment on static equilibrium, a force table is set up with three calibrated pulleys. String 1 exerts a force T1=1.80i+0.00j N\mathbf{T}_1 = 1.80\mathbf{i} + 0.00\mathbf{j} \text{ N}. String 2 exerts a force T2=−0.90i+1.56j N\mathbf{T}_2 = -0.90\mathbf{i} + 1.56\mathbf{j} \text{ N}. To achieve static equilibrium, a student must attach a third string with tension T3\mathbf{T}_3 such that T1+T2+T3=0\mathbf{T}_1 + \mathbf{T}_2 + \mathbf{T}_3 = \mathbf{0}. Determine the Cartesian components of T3\mathbf{T}_3, its required magnitude ∥T3∥\|\mathbf{T}_3\|, and its counterclockwise angle θ\theta measured from the positive xx-axis.

Answer and steps

Final answer

T3=−0.90i−1.56j N\mathbf{T}_3 = -0.90\mathbf{i} - 1.56\mathbf{j} \text{ N}, ∥T3∥=1.80 N\|\mathbf{T}_3\| = 1.80 \text{ N}, θ=240.0∘\theta = 240.0^{\circ}

Steps

01

Set up the equilibrium condition

For the force table to be in static equilibrium, the vector sum of all forces acting on the central ring must equal the zero vector:

T1+T2+T3=0\mathbf{T}_1 + \mathbf{T}_2 + \mathbf{T}_3 = \mathbf{0}

Rearranging to solve for the balancing tension T3\mathbf{T}_3:

T3=−(T1+T2)\mathbf{T}_3 = -(\mathbf{T}_1 + \mathbf{T}_2)

02

Determine the Cartesian components of T3\mathbf{T}_3

First, compute the resultant of the first two tensions by adding their corresponding xx- and yy-components:

T1+T2=(1.80−0.90)i+(0.00+1.56)j=0.90i+1.56j N\mathbf{T}_1 + \mathbf{T}_2 = (1.80 - 0.90)\mathbf{i} + (0.00 + 1.56)\mathbf{j} = 0.90\mathbf{i} + 1.56\mathbf{j} \text{ N}

Now, take the negative of this sum to find T3\mathbf{T}_3:

T3=−(0.90i+1.56j)=−0.90i−1.56j N\mathbf{T}_3 = -(0.90\mathbf{i} + 1.56\mathbf{j}) = -0.90\mathbf{i} - 1.56\mathbf{j} \text{ N}

03

Calculate the magnitude ∥T3∥\|\mathbf{T}_3\|

Apply the Pythagorean theorem to find the magnitude:

∥T3∥=(−0.90)2+(−1.56)2=0.8100+2.4336=3.2436≈1.80 N\|\mathbf{T}_3\| = \sqrt{(-0.90)^2 + (-1.56)^2} = \sqrt{0.8100 + 2.4336} = \sqrt{3.2436} \approx 1.80 \text{ N}

04

Calculate the counterclockwise angle θ\theta

Find the reference angle ϕ\phi formed with the xx-axis:

ϕ=arctan⁡(∣T3y∣∣T3x∣)=arctan⁡(1.560.90)≈60.0∘\phi = \arctan\left(\frac{|T_{3y}|}{|T_{3x}|}\right) = \arctan\left(\frac{1.56}{0.90}\right) \approx 60.0^{\circ}

Common Pitfall: Evaluating arctan⁡(−1.56−0.90)\arctan\left(\frac{-1.56}{-0.90}\right) on a standard calculator yields +60.0∘+60.0^{\circ} (Quadrant I) because the negative signs cancel out. However, because both T3x=−0.90T_{3x} = -0.90 and T3y=−1.56T_{3y} = -1.56 are negative, the vector lies in Quadrant III.

Therefore, the counterclockwise angle measured from the positive xx-axis is:

θ=180∘+60.0∘=240.0∘\theta = 180^{\circ} + 60.0^{\circ} = 240.0^{\circ}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the resultant force of the first two strings instead of the equilibrant, forgetting to negate the components for static equilibrium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T3=T1+T2  ⟹  T3x=1.80−0.90=0.90 N,  T3y=0.00+1.56=1.56 N  ⟹  T3=0.90i+1.56j NT_3 = T_1 + T_2 \implies T_{3x} = 1.80 - 0.90 = 0.90\text{ N},\; T_{3y} = 0.00 + 1.56 = 1.56\text{ N} \implies \mathbf{T}_3 = 0.90\mathbf{i} + 1.56\mathbf{j}\text{ N}

    Correct

    T1+T2+T3=0  ⟹  T3=−(T1+T2)=−0.90i−1.56j N\mathbf{T}_1 + \mathbf{T}_2 + \mathbf{T}_3 = \mathbf{0} \implies \mathbf{T}_3 = -(\mathbf{T}_1 + \mathbf{T}_2) = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}

    You found the resultant sum of the first two tension vectors rather than the equilibrant tension. To satisfy T1+T2+T3=0\mathbf{T}_1 + \mathbf{T}_2 + \mathbf{T}_3 = \mathbf{0}, you must solve for T3\mathbf{T}_3 by negating the sum: T3=−(T1+T2)\mathbf{T}_3 = -(\mathbf{T}_1 + \mathbf{T}_2).

  2. Step 2

    |T_3| = (0.90)2+(1.56)2\sqrt{(0.90)^2 + (1.56)^2}   ⟹  \implies |T_3| = 0.81+2.4336\sqrt{0.81 + 2.4336} = 3.2436\sqrt{3.2436} ≈\approx 1.80 N\text{ N}

    Correct

    |T\mathbf{T}3| = (−0.90)2+(−1.56)2\sqrt{(-0.90)^2 + (-1.56)^2} = 3.2436\sqrt{3.2436} ≈\approx 1.80 N\text{ N}

    Your magnitude arithmetic is completely correct. Because squaring eliminates negative signs, this calculation yields the correct magnitude of 1.80 N1.80\text{ N}, but it was carried out using the un-negated components.

  3. Step 3

    θ=arctan⁡(1.560.90)=arctan⁡(1.7333)  ⟹  θ≈60.0∘\theta = \arctan\left(\frac{1.56}{0.90}\right) = \arctan(1.7333) \implies \theta \approx 60.0^{\circ}

    Correct

    θ=180∘+arctan⁡(1.560.90)=180∘+60.0∘=240.0∘\theta = 180^{\circ} + \arctan\left(\frac{1.56}{0.90}\right) = 180^{\circ} + 60.0^{\circ} = 240.0^{\circ}

    Because you used positive components, your angle points into Quadrant I (60.0∘60.0^{\circ}). With the true equilibrant components T3x=−0.90 NT_{3x} = -0.90\text{ N} and T3y=−1.56 NT_{3y} = -1.56\text{ N}, the vector lies in Quadrant III, so you must add 180∘180^{\circ} to the reference angle.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly added the individual components of T1\mathbf{T}_1 and T2\mathbf{T}_2.

You applied the Pythagorean theorem accurately to find the vector magnitude.

You correctly computed the reference angle using the inverse tangent function.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrant vs. Resultant Sign Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You solved for the resultant force R=T1+T2\mathbf{R} = \mathbf{T}_1 + \mathbf{T}_2 instead of the balancing equilibrant T3=−R\mathbf{T}_3 = -\mathbf{R}. For a system in static equilibrium, the balancing vector must directly oppose the resultant vector, meaning every component must have its sign reversed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium Condition
  • Static equilibrium requires ∑F=0\sum \mathbf{F} = \mathbf{0}, which means the equilibrant force satisfies Feq=−∑Fknown\mathbf{F}_{\text{eq}} = -\sum \mathbf{F}_{\text{known}}.

  • Always isolate the unknown vector by moving the known vectors across the equals sign: T3=−(T1+T2)\mathbf{T}_3 = -(\mathbf{T}_1 + \mathbf{T}_2).

Quadrant Check
  • The standard arctan⁡(y/x)\arctan(y/x) output yields Quadrant I for two negative components because (−y)/(−x)=y/x(-y)/(-x) = y/x.

  • Plot or note the signs of both Cartesian components before determining the direction angle: negative xx and negative yy require θ=180∘+ϕ\theta = 180^{\circ} + \phi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the equilibrium condition: T1+T2+T3=0\mathbf{T}_1 + \mathbf{T}_2 + \mathbf{T}_3 = \mathbf{0}.

  2. Isolate T3\mathbf{T}_3: T3=−(T1+T2)=−(0.90i+1.56j)=−0.90i−1.56j N\mathbf{T}_3 = -(\mathbf{T}_1 + \mathbf{T}_2) = -(0.90\mathbf{i} + 1.56\mathbf{j}) = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}.

  3. Calculate the magnitude: ∥T3∥=(−0.90)2+(−1.56)2=3.2436≈1.80 N\|\mathbf{T}_3\| = \sqrt{(-0.90)^2 + (-1.56)^2} = \sqrt{3.2436} \approx 1.80\text{ N}.

  4. Identify the quadrant: since T3x<0T_{3x} < 0 and T3y<0T_{3y} < 0, T3\mathbf{T}_3 lies in Quadrant III.

  5. Compute the direction angle: θ=180∘+arctan⁡(∣−1.56∣∣−0.90∣)=180∘+60.0∘=240.0∘\theta = 180^{\circ} + \arctan\left(\frac{|-1.56|}{|-0.90|}\right) = 180^{\circ} + 60.0^{\circ} = 240.0^{\circ}.

Final answer

T3=−0.90i−1.56j N\mathbf{T}_3 = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}, ∥T3∥=1.80 N\|\mathbf{T}_3\| = 1.80\text{ N}, θ=240.0∘\theta = 240.0^{\circ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between resultant force and equilibrant force in equilibrium problems.

  • Practice determining standard-position angles θ∈[0∘,360∘)\theta \in [0^{\circ}, 360^{\circ}) from Cartesian components across all four quadrants.](streamdown:incomplete-link)

OverviewACEpath Teacher's Diagnosis

02 The student computes the reference angle using arctan(y/x) but fails to add 180° for a vector in the third quadrant, misidentifying the direction as first quadrant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T3=−(T1+T2)  ⟹  T3x=−(1.80−0.90)=−0.90 N,T3y=−(0.00+1.56)=−1.56 N  ⟹  T3=−0.90i−1.56j NT_3 = -(T_1 + T_2) \implies T_{3x} = -(1.80 - 0.90) = -0.90\text{ N}, T_{3y} = -(0.00 + 1.56) = -1.56\text{ N} \implies T_3 = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}

  2. Step 2

    |T_3| = (−0.90)2+(−1.56)2\sqrt{(-0.90)^2 + (-1.56)^2} = 0.81+2.4336\sqrt{0.81 + 2.4336} = 3.2436\sqrt{3.2436} ≈\approx 1.80 N\text{ N}

  3. Step 3

    θ=arctan⁡(−1.56−0.90)≈arctan⁡(1.7333)≈60.0∘\theta = \arctan\left(\frac{-1.56}{-0.90}\right) \approx \arctan(1.7333) \approx 60.0^\circ

    Correct

    θ=180∘+arctan⁡(−1.56−0.90)=180∘+60.0∘=240.0∘\theta = 180^\circ + \arctan\left(\frac{-1.56}{-0.90}\right) = 180^\circ + 60.0^\circ = 240.0^\circ

    Because both T3x=−0.90 NT_{3x} = -0.90\text{ N} and T3y=−1.56 NT_{3y} = -1.56\text{ N} are negative, the vector lies in Quadrant III. The standard arctan⁡\arctan function only returns angles in the range (−90∘,90∘)(-90^\circ, 90^\circ), so you need to add 180∘180^\circ to get the correct counterclockwise angle from the positive xx-axis.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the static equilibrium condition T1+T2+T3=0\mathbf{T}_1 + \mathbf{T}_2 + \mathbf{T}_3 = \mathbf{0} to find the components of T3\mathbf{T}_3.

You accurately computed the magnitude using the sum of the squares of the components.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Quadrant Ambiguity in Inverse Tangent

You took the direct output of arctan⁡(y/x)\arctan(y/x) as the final direction without adjusting for the signs of the components.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Standard inverse tangent arctan⁡(y/x)\arctan(y/x) maps ratios to Quadrants I and IV because (−y)/(−x)=y/x(-y)/(-x) = y/x. When a vector has negative xx- and yy-components, it lies in Quadrant III, which requires adding 180∘180^\circ to the reference angle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect component signs before finding the angle
  • A vector with x<0x < 0 and y<0y < 0 lies in Quadrant III, where angles measure between 180∘180^\circ and 270∘270^\circ.

  • Always sketch the vector or check the signs of (x,y)(x, y) to determine its quadrant before calculating θ\theta.

Apply the quadrant correction to inverse tangent
  • For x<0x < 0, the counterclockwise angle from the positive xx-axis is θ=180∘+arctan⁡(y/x)\theta = 180^\circ + \arctan(y/x).

  • Add 180∘180^\circ to the calculator's principal angle whenever the xx-component is negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the quadrant of T3=−0.90i−1.56j N\mathbf{T}_3 = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}: since x<0x < 0 and y<0y < 0, T3\mathbf{T}_3 is in Quadrant III.

  2. Find the reference angle: ϕ=arctan⁡(∣−1.56∣∣−0.90∣)≈60.0∘\phi = \arctan\left(\frac{|-1.56|}{|-0.90|}\right) \approx 60.0^\circ.

  3. Calculate the counterclockwise angle from the positive xx-axis: θ=180∘+60.0∘=240.0∘\theta = 180^\circ + 60.0^\circ = 240.0^\circ.

Final answer

T3=−0.90i−1.56j N\mathbf{T}_3 = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}, ∥T3∥=1.80 N\|\mathbf{T}_3\| = 1.80\text{ N}, θ=240.0∘\theta = 240.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch each vector on a quick coordinate plane to visually confirm its quadrant before calculating direction angles.

  • Practice using the two-argument arctangent rule (atan2(y,x)\text{atan2}(y, x)) to automatically account for signs.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts 180° from the reference angle (or treats the third-quadrant angle as 180° - 60°) confusing the second and third quadrant rules.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T3=−(T1+T2)  ⟹  T3x=−(1.80−0.90)=−0.90 N,  T3y=−(0.00+1.56)=−1.56 N  ⟹  T3=−0.90i−1.56j N\mathbf{T}_3 = -(\mathbf{T}_1 + \mathbf{T}_2) \implies T_{3x} = -(1.80 - 0.90) = -0.90\text{ N},\; T_{3y} = -(0.00 + 1.56) = -1.56\text{ N} \implies \mathbf{T}_3 = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N}

  2. Step 2

    ∥T3∥=(−0.90)2+(−1.56)2=0.81+2.4336=3.2436≈1.80 N\|\mathbf{T}_3\| = \sqrt{(-0.90)^2 + (-1.56)^2} = \sqrt{0.81 + 2.4336} = \sqrt{3.2436} \approx 1.80\text{ N}

  3. Step 3

    θref=arctan⁡(1.560.90)≈60.0∘\theta_{\text{ref}} = \arctan\left(\frac{1.56}{0.90}\right) \approx 60.0^\circ

  4. Step 4

    θ=180∘−60.0∘=120.0∘\theta = 180^\circ - 60.0^\circ = 120.0^\circ

    Correct

    θ=180∘+60.0∘=240.0∘\theta = 180^\circ + 60.0^\circ = 240.0^\circ

    Because T3x<0T_{3x} < 0 and T3y<0T_{3y} < 0, the vector lies in Quadrant III. To find the counterclockwise angle from the positive xx-axis in Quadrant III, you need to add the reference angle to 180∘180^\circ, giving 180∘+60.0∘=240.0∘180^\circ + 60.0^\circ = 240.0^\circ. The formula 180∘−θref180^\circ - \theta_{\text{ref}} applies to Quadrant II.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Newton's first law to set the vector sum of all forces to zero.

You accurately resolved the components and computed the magnitude of T3\mathbf{T}_3.

You correctly used the ratio of absolute components to find the 60.0∘60.0^\circ reference angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Quadrant Angle Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the Quadrant II direction formula (180∘−θref180^\circ - \theta_{\text{ref}}) instead of the Quadrant III formula (180∘+θref180^\circ + \theta_{\text{ref}}) for a vector with both negative components.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Quadrant
  • If x<0x < 0 and y<0y < 0, the point or vector lies in Quadrant III.

  • Sketch the vector components on a coordinate grid before calculating the standard-position angle.

Quadrant Angle Formulas
  • For a reference angle θref∈(0∘,90∘)\theta_{\text{ref}} \in (0^\circ, 90^\circ):

    • Quadrant II (x<0,y>0x < 0, y > 0): θ=180∘−θref\theta = 180^\circ - \theta_{\text{ref}}
    • Quadrant III (x<0,y<0x < 0, y < 0): θ=180∘+θref\theta = 180^\circ + \theta_{\text{ref}}
    • Quadrant IV (x>0,y<0x > 0, y < 0): θ=360∘−θref\theta = 360^\circ - \theta_{\text{ref}}
  • Check the signs of both components and choose the formula matching the correct quadrant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that T3x=−0.90<0T_{3x} = -0.90 < 0 and T3y=−1.56<0T_{3y} = -1.56 < 0, placing T3\mathbf{T}_3 in Quadrant III.

  2. In Quadrant III, the vector points below the negative xx-axis, so rotate 180∘180^\circ to reach the negative xx-axis, then rotate another θref\theta_{\text{ref}} counterclockwise: θ=180∘+60.0∘=240.0∘\theta = 180^\circ + 60.0^\circ = 240.0^\circ.

Final answer

T3=−0.90i−1.56j N,  ∥T3∥≈1.80 N,  θ=240.0∘\mathbf{T}_3 = -0.90\mathbf{i} - 1.56\mathbf{j}\text{ N},\; \|\mathbf{T}_3\| \approx 1.80\text{ N},\; \theta = 240.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick set of axes and draw the vector from its component signs before computing the angle.

  • Practice converting reference angles to standard position angles across all four quadrants.

Lock it in

Similar question

01

A particle is subjected to two forces: F1=4.0i−2.0j N\mathbf{F}_1 = 4.0\mathbf{i} - 2.0\mathbf{j}\text{ N} and F2=−1.0i+6.0j N\mathbf{F}_2 = -1.0\mathbf{i} + 6.0\mathbf{j}\text{ N}. Determine the equilibrant force F3\mathbf{F}_3 needed to achieve static equilibrium, along with its magnitude.

Answer

F3=−3.0i−4.0j N\mathbf{F}_3 = -3.0\mathbf{i} - 4.0\mathbf{j}\text{ N}, ∥F3∥=5.0 N\|\mathbf{F}_3\| = 5.0\text{ N}. Key steps: find the resultant R=F1+F2=3.0i+4.0j N\mathbf{R} = \mathbf{F}_1 + \mathbf{F}_2 = 3.0\mathbf{i} + 4.0\mathbf{j}\text{ N}; negate it for equilibrium: F3=−R=−3.0i−4.0j N\mathbf{F}_3 = -\mathbf{R} = -3.0\mathbf{i} - 4.0\mathbf{j}\text{ N}; compute magnitude ∥F3∥=(−3.0)2+(−4.0)2=5.0 N\|\mathbf{F}_3\| = \sqrt{(-3.0)^2 + (-4.0)^2} = 5.0\text{ N}.

02

Two cables pull on a ring with forces A=−2.5i−3.0j N\mathbf{A} = -2.5\mathbf{i} - 3.0\mathbf{j}\text{ N} and B=−1.5i+1.0j N\mathbf{B} = -1.5\mathbf{i} + 1.0\mathbf{j}\text{ N}. Find the Cartesian components and the counterclockwise angle θ\theta (from the positive xx-axis) of the third force C\mathbf{C} required to maintain static equilibrium.

Answer

C=4.0i+2.0j N\mathbf{C} = 4.0\mathbf{i} + 2.0\mathbf{j}\text{ N}, θ≈26.6∘\theta \approx 26.6^{\circ}. Key steps: sum the forces A+B=−4.0i−2.0j N\mathbf{A} + \mathbf{B} = -4.0\mathbf{i} - 2.0\mathbf{j}\text{ N}; negate for equilibrium C=−(A+B)=4.0i+2.0j N\mathbf{C} = -(\mathbf{A} + \mathbf{B}) = 4.0\mathbf{i} + 2.0\mathbf{j}\text{ N}; since both components are positive, C\mathbf{C} lies in Quadrant I with θ=arctan⁡(2.0/4.0)=arctan⁡(0.5)≈26.6∘\theta = \arctan(2.0 / 4.0) = \arctan(0.5) \approx 26.6^{\circ}.

03

On a circular force table, pulley 1 exerts T1=2.00i+1.00j N\mathbf{T}_1 = 2.00\mathbf{i} + 1.00\mathbf{j}\text{ N} and pulley 2 exerts T2=−5.00i+3.00j N\mathbf{T}_2 = -5.00\mathbf{i} + 3.00\mathbf{j}\text{ N}. Determine the magnitude and standard-position direction angle θ∈[0∘,360∘)\theta \in [0^{\circ}, 360^{\circ}) of the tension T3\mathbf{T}_3 needed to center the ring in static equilibrium.](streamdown:incomplete-link)

Answer

∥T3∥=5.00 N\|\mathbf{T}_3\| = 5.00\text{ N}, θ≈306.9∘\theta \approx 306.9^{\circ}. Key steps: resultant is R=T1+T2=−3.00i+4.00j N\mathbf{R} = \mathbf{T}_1 + \mathbf{T}_2 = -3.00\mathbf{i} + 4.00\mathbf{j}\text{ N}; equilibrant is T3=−R=3.00i−4.00j N\mathbf{T}_3 = -\mathbf{R} = 3.00\mathbf{i} - 4.00\mathbf{j}\text{ N}; magnitude is ∥T3∥=32+(−4)2=5.00 N\|\mathbf{T}_3\| = \sqrt{3^2 + (-4)^2} = 5.00\text{ N}; since T3x>0T_{3x} > 0 and T3y<0T_{3y} < 0, T3\mathbf{T}_3 is in Quadrant IV, giving θ=360∘−arctan⁡(4.00/3.00)=360∘−53.13∘≈306.9∘\theta = 360^{\circ} - \arctan(4.00 / 3.00) = 360^{\circ} - 53.13^{\circ} \approx 306.9^{\circ}.

Loading workspace…