Resources

Consider the family of linear equations Lm:mx−y=2m−1L_m: mx - y = 2m - 1 and the horizontal line L0:y=5L_0: y = 5 graphed in the Cartesian plane. As the slope parameter mm approaches infinity (m→∞m \to \infty), determine the limiting vertical boundary line that LmL_m approaches, and find the asymptotic intersection coordinate point (x∞,y∞)(x_\infty, y_\infty) of the system.

Answer and steps

Final answer

(2,5)(2, 5)

Steps

01

Rewrite the family of lines in point-slope form

To find the limiting vertical boundary line and the asymptotic intersection point, we analyze the structure of the family of lines and examine its behavior as the parameter mm grows without bound.

Start with the equation for LmL_m: mx−y=2m−1mx - y = 2m - 1

Rearrange the terms to isolate yy: y=mx−2m+1y = mx - 2m + 1

Factor out the parameter mm: y−1=m(x−2)y - 1 = m(x - 2)

This is the point-slope form of a linear equation, showing that for every value of mm, the line LmL_m passes through the fixed pivot point (2,1)(2, 1) with slope mm.

02

Determine the limiting vertical boundary line

To observe what happens as m→∞m \to \infty, divide both sides of the factored equation by mm (for m≠0m \neq 0): x−2=y−1mx - 2 = \frac{y - 1}{m}

As m→∞m \to \infty, the right side approaches 00 for any finite value of yy: lim⁡m→∞y−1m=0\lim_{m \to \infty} \frac{y - 1}{m} = 0

Therefore, the equation becomes: x−2=0  ⟹  x=2x - 2 = 0 \implies x = 2

As the slope becomes infinitely steep, the line LmL_m rotates around (2,1)(2, 1) and approaches the vertical boundary line x=2x = 2.

03

Find the asymptotic intersection coordinate point

The line L0L_0 is the horizontal line given by y=5y = 5. Substitute y=5y = 5 into the equation for LmL_m: 5−1=m(x−2)5 - 1 = m(x - 2) 4=m(x−2)4 = m(x - 2)

Solve for xx: x−2=4m  ⟹  x=2+4mx - 2 = \frac{4}{m} \implies x = 2 + \frac{4}{m}

Now evaluate the limit as m→∞m \to \infty: x∞=lim⁡m→∞(2+4m)=2+0=2x_\infty = \lim_{m \to \infty} \left(2 + \frac{4}{m}\right) = 2 + 0 = 2

Since yy is fixed along L0L_0 at y=5y = 5, the asymptotic intersection coordinate point is: (x∞,y∞)=(2,5)(x_\infty, y_\infty) = (2, 5)

(Common Pitfall: Confusing an infinite slope with an undefined intersection. While a perfectly vertical line has an undefined slope, a line rotating toward the vertical line x=2x = 2 clearly approaches the specific intersection point (2,5)(2, 5) along the horizontal line y=5y = 5.)

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to divide the constant term -1 by m when taking the limit as m approaches infinity, leading to the incorrect vertical line x = 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mx - y = 2m - 1   ⟹  \implies x - ym\frac{y}{m} = 2 - 1

    Correct

    mx - y = 2m - 1   ⟹  \implies x - ym\frac{y}{m} = 2 - 1m\frac{1}{m}

    When dividing an equation by a parameter mm, every term on both sides must be divided by mm. Dividing 2m−12m - 1 by mm gives 2mm−1m=2−1m\frac{2m}{m} - \frac{1}{m} = 2 - \frac{1}{m}, rather than 2−12 - 1.

  2. Step 2

    As \text{As } m →\to ∞\infty,\ ym\frac{y}{m} →\to 0   ⟹  \implies x = 2 - 1 = 1

    Correct

    As \text{As } m →\to ∞\infty,\ ym\frac{y}{m} →\to 0  and \text{ and } 1m\frac{1}{m} →\to 0   ⟹  \implies x = 2

    Your reasoning that ym→0\frac{y}{m} \to 0 was completely correct, but the missing denominator on the constant term caused you to find x=1x = 1 instead of x=2x = 2.

  3. Step 3

    y = 5   ⟹  \implies (x_∞\infty, y_∞\infty) = (1, 5)

    Correct

    y = 5   ⟹  \implies (x_∞\infty, y_∞\infty) = (2, 5)

    You correctly paired the resulting xx-value with the horizontal line y=5y = 5, but the final coordinates inherited the earlier algebraic error.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that dividing by mm allows you to evaluate the asymptotic behavior as m→∞m \to \infty.

You correctly identified that the horizontal line fixes the coordinate y∞=5y_\infty = 5.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incomplete Division Across Terms

You divided mxmx, yy, and 2m2m by mm, but wrote −1-1 instead of −1m-\frac{1}{m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete distribution of the division operation across all additive terms on the right-hand side of the linear equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distribute division to every term
  • For any equation A+B=C+DA + B = C + D, dividing by m≠0m \neq 0 yields Am+Bm=Cm+Dm\frac{A}{m} + \frac{B}{m} = \frac{C}{m} + \frac{D}{m}.

  • Place parentheses around each side before dividing: mx−ym=2m−1m=2mm−1m\frac{mx - y}{m} = \frac{2m - 1}{m} = \frac{2m}{m} - \frac{1}{m}.

Alternative pivot-point check
  • Rewrite LmL_m in point-slope form y−y0=m(x−x0)y - y_0 = m(x - x_0) to find the fixed pivot point (x0,y0)(x_0, y_0).

  • Rearrange mx−y=2m−1mx - y = 2m - 1 into y−1=m(x−2)y - 1 = m(x - 2). As m→∞m \to \infty, the line becomes the vertical line passing through the pivot: x=2x = 2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the limit of both sides as m→∞m \to \infty: lim⁡m→∞(x−ym)=lim⁡m→∞(2−1m)\lim_{m \to \infty} \left(x - \frac{y}{m}\right) = \lim_{m \to \infty} \left(2 - \frac{1}{m}\right).

  2. Since ym→0\frac{y}{m} \to 0 for any finite yy and 1m→0\frac{1}{m} \to 0, the equation simplifies to x−0=2−0  ⟹  x=2x - 0 = 2 - 0 \implies x = 2.

  3. Substitute the boundary line x=2x = 2 into the horizontal line y=5y = 5 to obtain the asymptotic intersection point.

Final answer

(2, 5)

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that every term on both sides receives the denominator when dividing an equation by a parameter.

  • Try using the point-slope form y−y0=m(x−x0)y - y_0 = m(x - x_0) to identify the fixed pivot point (x0,y0)(x_0, y_0) as an independent verification method.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets m approaching infinity as setting the coefficient of x to 0, concluding the boundary line is horizontal at y = 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mx - 2m = y - 1   ⟹  \implies m(x - 2) = y - 1

  2. Step 2

    For very large \text{For very large } m, x - 2 = 0  does not hold so set \text{ does not hold so set } y - 1 = 0   ⟹  \implies y = 1

    Correct

    x - 2 = y−1m\frac{y - 1}{m}   ⟹  \implies $\lim_{m →\to ∞\infty}$(x - 2) = 0 \implies x = 2_

    Dividing both sides by mm yields x−2=y−1mx - 2 = \frac{y - 1}{m}. As m→∞m \to \infty, the term y−1m\frac{y - 1}{m} tends to 00, which gives the vertical line x=2x = 2, not the horizontal line y=1y = 1.

  3. Step 3

    The lines \text{The lines } y = 1  and \text{ and } y = 5  are parallel, so there is no intersection point.\text{ are parallel, so there is no intersection point.}

    Correct

    Substitute \text{Substitute } y = 5  and \text{ and } x = 2   ⟹  \implies (x_∞\infty, y_∞\infty) = (2, 5)

    Because you identified the limiting line as y=1y = 1 instead of x=2x = 2, you concluded that the line is parallel to y=5y = 5 with no intersection point.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the parameter mm and factored the linear equation into point-slope form.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted limiting behavior of linear slope

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the behavior of a line having an infinitely large slope with having a slope of zero, setting the yy-offset rather than the xx-offset to zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the variable before taking the limit
  • To evaluate the limit of m(x−x0)=y−y0m(x - x_0) = y - y_0 as m→∞m \to \infty, divide by mm to get x−x0=y−y0mx - x_0 = \frac{y - y_0}{m}.

  • Always divide by mm to place the parameter in the denominator, then send m→∞m \to \infty so the fraction vanishes to 00.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides of m(x−2)=y−1m(x - 2) = y - 1 by mm to get x−2=y−1mx - 2 = \frac{y - 1}{m}.

  2. Take the limit as m→∞m \to \infty: lim⁡m→∞y−1m=0\lim_{m \to \infty} \frac{y - 1}{m} = 0, giving the vertical line x−2=0x - 2 = 0, or x=2x = 2.

  3. Find the asymptotic intersection with L0:y=5L_0: y = 5 by substituting x=2x = 2 and y=5y = 5 to get (2,5)(2, 5).

Final answer

(2, 5)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking the limit as m→∞m \to \infty by dividing through by mm to see that lines become vertical rather than horizontal.

  • Graph families of lines passing through a fixed pivot point to visualize how steepness increases as mm grows.

OverviewACEpath Teacher's Diagnosis

03 The student solves for x in terms of y before taking the limit, but drops the y variable completely by treating it as 0 instead of evaluating at y = 5.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x = y+2m−1m\frac{y + 2m - 1}{m} = 2 + y−1m\frac{y - 1}{m}

  2. Step 2

    As m→∞,x=2\text{As } m \to \infty,\quad x = 2

  3. Step 3

    Since \text{Since } ym\frac{y}{m} →\to 0,  y_∞\infty = 0   ⟹  \implies (x_∞\infty, y_∞\infty) = (2, 0)_

    Correct

    Since \text{Since } L_0  is \text{ is } y = 5,  y_∞\infty = 5   ⟹  \implies (x_∞\infty, y_∞\infty) = (2, 5)_

    The point of intersection must satisfy both equations in the system. Because L0L_0 is defined as y=5y = 5, the yy-coordinate is fixed at 55 for every intersection, rather than approaching 00.

WHAT YOU DID WELL
Compliments from Your Teacher

You isolated xx algebraically in terms of yy and the slope parameter mm.

You evaluated the limit of the expression as m→∞m \to \infty to find the vertical boundary line x=2x = 2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignoring system constraint

You inferred y∞=0y_\infty = 0 from the term ym→0\frac{y}{m} \to 0 instead of using the given horizontal line equation y=5y = 5.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating yy as an unconstrained independent variable or zero limit rather than enforcing the fixed constraint y=5y = 5 given by the system's second line L0L_0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Enforce All Equations
  • Every intersection point of a system must satisfy every line in that system simultaneously.

  • Identify any fixed coordinate variables (such as y=5y = 5 for a horizontal line) and substitute them directly before or after taking limits.

Limit of a Ratio vs. Variable Value
  • The fact that ym→0\frac{y}{m} \to 0 as m→∞m \to \infty only implies that yy is finite, not that y=0y = 0.

  • Do not set a numerator to zero just because the entire fraction approaches zero when the denominator grows without bound.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The system pairs LmL_m with the horizontal line L0:y=5L_0: y = 5.

  2. Substitute y=5y = 5 into the line equation: x=2+5−1m=2+4mx = 2 + \frac{5 - 1}{m} = 2 + \frac{4}{m}.

  3. Take the limit as m→∞m \to \infty: x∞=2+0=2x_\infty = 2 + 0 = 2.

  4. Since y=5y = 5 is constant along L0L_0, the asymptotic intersection point is (2,5)(2, 5).

Final answer

(2, 5)

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that your final coordinates satisfy all given equations in the system, especially constant lines like y=cy = c or x=cx = c.

  • Review the distinction between a fraction approaching zero due to a large denominator versus the numerator itself being zero.

Lock it in

Similar question

01

Consider the family of linear equations Lm:mx+2y=3m+4L_m: mx + 2y = 3m + 4. Determine the limiting vertical boundary line that LmL_m approaches as m→∞m \to \infty.

Answer

Divide every term by mm: x+2ym=3+4mx + \frac{2y}{m} = 3 + \frac{4}{m}. As m→∞m \to \infty, 2ym→0\frac{2y}{m} \to 0 and 4m→0\frac{4}{m} \to 0. Thus, x=3x = 3.

02

A family of lines is given by Lk:k(x−3)−(y+2)=0L_k: k(x - 3) - (y + 2) = 0. Find the asymptotic intersection coordinate point of LkL_k and the horizontal line y=4y = 4 as k→∞k \to \infty.

Answer

Rewrite in point-slope form: y+2=k(x−3)y + 2 = k(x - 3), which has a fixed pivot at (3,−2)(3, -2). As k→∞k \to \infty, the line approaches the vertical line x=3x = 3. Intersecting with y=4y = 4 yields (3,4)(3, 4).

03

Consider the family of lines (2m+1)x−my=6m−5(2m + 1)x - my = 6m - 5. As m→∞m \to \infty, find the limiting vertical boundary line, and determine its intersection with the line 2x+y=102x + y = 10.

Answer

Divide the entire equation by mm: (2+1m)x−y=6−5m\left(2 + \frac{1}{m}\right)x - y = 6 - \frac{5}{m}. As m→∞m \to \infty, this becomes 2x−y=62x - y = 6, which is not vertical because yy has a non-zero coefficient after dividing. To check the vertical limit, isolate xx: x=my+6m−52m+1=y+6−5/m2+1/mx = \frac{my + 6m - 5}{2m + 1} = \frac{y + 6 - 5/m}{2 + 1/m}. As m→∞m \to \infty for finite yy, x→y+62x \to \frac{y + 6}{2}, meaning lines rotate but do not fix a single vertical asymptote unless grouped by mm: m(2x−y−6)+(x+5)=0m(2x - y - 6) + (x + 5) = 0. Dividing by mm gives 2x−y−6=02x - y - 6 = 0. Substitute into 2x+y=102x + y = 10: adding gives 4x=16  ⟹  x=44x = 16 \implies x = 4, and y=2y = 2. The intersection point is (4,2)(4, 2).

Loading workspace…