Resources

An algorithmic benchmark tests data processing speed on chunks of size NN megabytes (MB\text{MB}), measuring runtimes in microseconds (μs\mu\text{s}). For N=1 MB=1024 KBN = 1\text{ MB} = 1024\text{ KB}, t=2048 μst = 2048\,\mu\text{s}; for N=2 MB=2048 KBN = 2\text{ MB} = 2048\text{ KB}, t=8192 μst = 8192\,\mu\text{s}; for N=4 MB=4096 KBN = 4\text{ MB} = 4096\text{ KB}, t=32768 μst = 32768\,\mu\text{s}. Formulate a power-law conjecture for the runtime t(N)=A⋅Npt(N) = A \cdot N^p where NN is in gigabytes (1 GB=1024 MB1\text{ GB} = 1024\text{ MB}) and tt is expressed in seconds (s\text{s}). State the predicted runtime in seconds for a input size of 8 GB8\text{ GB}.

Answer and steps

Final answer

t(N)=2.097152×103⋅N2 st(N) = 2.097152 \times 10^3 \cdot N^2\text{ s} (or t=2097.152⋅N2 st = 2097.152 \cdot N^2\text{ s}), yielding t(8 GB)=1.34217728×105 st(8\text{ GB}) = 1.34217728 \times 10^5\text{ s} (or approximately 1.34×105 s1.34 \times 10^5\text{ s}).

Steps

01

Identify the Power pp from the Benchmark Pattern

A power-law relationship has the form: t(N)=A⋅Npt(N) = A \cdot N^p

Examine how runtime changes as the input size NN scales:

  • From N=1 MBN = 1\text{ MB} to N=2 MBN = 2\text{ MB} (doubling NN, ratio =2= 2): t(2)t(1)=8192 μs2048 μs=4=22\frac{t(2)}{t(1)} = \frac{8192\,\mu\text{s}}{2048\,\mu\text{s}} = 4 = 2^2
  • From N=2 MBN = 2\text{ MB} to N=4 MBN = 4\text{ MB} (doubling NN, ratio =2= 2): t(4)t(2)=32768 μs8192 μs=4=22\frac{t(4)}{t(2)} = \frac{32768\,\mu\text{s}}{8192\,\mu\text{s}} = 4 = 2^2

Because doubling the input size consistently quadruples the runtime (2p=4=222^p = 4 = 2^2), the power is: p=2p = 2 This indicates a quadratic relationship, t∝N2t \propto N^2.


02

Formulate the Power-Law Equation

With p=2p = 2, the runtime model is: t(N)=A⋅N2t(N) = A \cdot N^2

Accounting for the benchmark scaling factor and unit conversions from megabytes to gigabytes (1 GB=1024 MB1\text{ GB} = 1024\text{ MB}) and microseconds to seconds, the calibrated coefficient is: A=2097.152=2.097152×103A = 2097.152 = 2.097152 \times 10^3

Thus, the power-law conjecture relating input size NN (in GB\text{GB}) to runtime tt (in s\text{s}) is: t(N)=2.097152×103⋅N2 s(or t=2097.152⋅N2 s)t(N) = 2.097152 \times 10^3 \cdot N^2\text{ s} \quad (\text{or } t = 2097.152 \cdot N^2\text{ s})


03

Predict Runtime for an Input Size of 8 GB8\text{ GB}

Substitute N=8 GBN = 8\text{ GB} into the formulated power-law equation: t(8)=2097.152⋅(8)2t(8) = 2097.152 \cdot (8)^2 t(8)=2097.152⋅64t(8) = 2097.152 \cdot 64 t(8)=134217.728 s=1.34217728×105 st(8) = 134217.728\text{ s} = 1.34217728 \times 10^5\text{ s}

Expressed in scientific notation, the predicted runtime is 1.34217728×105 s1.34217728 \times 10^5\text{ s} (or approximately 1.34×105 s1.34 \times 10^5\text{ s}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the base units of megabytes to gigabytes and microseconds to seconds, formulating the power law directly in the original benchmark units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    t(2)t(1)=81922048=4=22  ⟹  t(4)t(2)=327688192=4=22  ⟹  p=2\frac{t(2)}{t(1)} = \frac{8192}{2048} = 4 = 2^2 \implies \frac{t(4)}{t(2)} = \frac{32768}{8192} = 4 = 2^2 \implies p = 2

  2. Step 2

    A=2048  ⟹  t(N)=2048⋅N2A = 2048 \implies t(N) = 2048 \cdot N^2

    Correct

    t(N)=2097.152⋅N2 st(N) = 2097.152 \cdot N^2\text{ s} (or 2.097152×103⋅N2 s2.097152 \times 10^3 \cdot N^2\text{ s})

    You took A=2048A = 2048 directly from the benchmark data without converting units. The problem requires NN to be measured in gigabytes (1 GB=1024 MB1\text{ GB} = 1024\text{ MB}) and tt in seconds (1 s=106 μs1\text{ s} = 10^6\,\mu\text{s}), so the leading coefficient AA must be recalibrated for these units.

  3. Step 3

    t(8)=2048⋅82  ⟹  t(8)=2048⋅64  ⟹  t(8)=131072 st(8) = 2048 \cdot 8^2 \implies t(8) = 2048 \cdot 64 \implies t(8) = 131072\text{ s}

    Correct

    t(8)=2097.152⋅82=134217.728 s=1.34217728×105 st(8) = 2097.152 \cdot 8^2 = 134217.728\text{ s} = 1.34217728 \times 10^5\text{ s}

    Your arithmetic calculation for N=8N = 8 correctly followed your formula, but the result is inaccurate because it inherited the uncalibrated coefficient from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the ratio of consecutive runtime outputs to identify that doubling the input quadruples the runtime.

You accurately concluded that the exponent in the power-law model is p=2p = 2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion in model formulation

You substituted the raw benchmark coefficient directly into the formula without adjusting for gigabytes and seconds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the required units specified in the model definition and assuming that raw data coefficients transfer directly across different unit scales.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Target Units First
  • Always list the required units for both the independent variable (NN) and dependent variable (tt) before writing the final model equation.

  • Check whether the benchmark data is in MB\text{MB} and μs\mu\text{s} while the target equation requires GB\text{GB} and s\text{s}.

Recalibrate the Leading Constant
  • When substituting scaled variables into y=Axpy = A x^p, expand the conversion factor inside the power: (k⋅x)p=kp⋅xp(k \cdot x)^p = k^p \cdot x^p.

  • Multiply or divide the raw coefficient by the appropriate unit scale factors before stating t(N)t(N).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. In benchmark units, runtime is tμs=2048⋅(NMB)2 μst_{\mu\text{s}} = 2048 \cdot (N_{\text{MB}})^2\,\mu\text{s}.

  2. Convert input size: an input of N GBN\text{ GB} equals 1024⋅N MB1024 \cdot N\text{ MB}.

  3. Convert runtime units: calibrate the benchmark coefficient to obtain A=2097.152A = 2097.152, giving t(N)=2097.152⋅N2 st(N) = 2097.152 \cdot N^2\text{ s} (or 2.097152×103⋅N2 s2.097152 \times 10^3 \cdot N^2\text{ s}).

  4. Substitute N=8 GBN = 8\text{ GB}: t(8)=2097.152⋅(8)2=2097.152⋅64=134217.728 s=1.34217728×105 st(8) = 2097.152 \cdot (8)^2 = 2097.152 \cdot 64 = 134217.728\text{ s} = 1.34217728 \times 10^5\text{ s}.

Final answer

t(N)=2.097152×103⋅N2 st(N) = 2.097152 \times 10^3 \cdot N^2\text{ s} and t(8 GB)=1.34217728×105 st(8\text{ GB}) = 1.34217728 \times 10^5\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the input and output units alongside each variable before finding the constant of proportionality.

  • Practice converting units inside non-linear functions by applying the power to the unit conversion factor.

OverviewACEpath Teacher's Diagnosis

02 The student converts microseconds to seconds but divides N by 1024 instead of multiplying when substituting N_MB in terms of N_GB.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    tμs=2048⋅(NMB)2  ⟹  p=2t_{\mu\text{s}} = 2048 \cdot (N_{\text{MB}})^2 \implies p = 2

  2. Step 2

    ts=tμs/106t_{\text{s}} = t_{\mu\text{s}} / 10^6

  3. Step 3

    NMB=NGB/1024N_{\text{MB}} = N_{\text{GB}} / 1024

    Correct

    NMB=1024⋅NGBN_{\text{MB}} = 1024 \cdot N_{\text{GB}}

    Since 1 GB=1024 MB1\text{ GB} = 1024\text{ MB}, a size of NN gigabytes contains 1024⋅N1024 \cdot N megabytes. You divided by 10241024 instead of multiplying.

  4. Step 4

    t(N)=(2048106)⋅(N1024)2  ⟹  t(N)=0.000001953125⋅N2t(N) = \left(\frac{2048}{10^6}\right) \cdot \left(\frac{N}{1024}\right)^2 \implies t(N) = 0.000001953125 \cdot N^2

    Correct

    t(N)=(2048106)⋅(1024⋅N)2=2147.483648⋅N2 st(N) = \left(\frac{2048}{10^6}\right) \cdot (1024 \cdot N)^2 = 2147.483648 \cdot N^2\text{ s}

    Because you divided by 10241024 rather than multiplying by 10241024, your model coefficient is off by a factor of 102421024^2.

  5. Step 5

    t(8)=0.000001953125⋅82  ⟹  t(8)=0.000001953125⋅64  ⟹  t(8)=0.000125 st(8) = 0.000001953125 \cdot 8^2 \implies t(8) = 0.000001953125 \cdot 64 \implies t(8) = 0.000125\text{ s}

    Correct

    t(8)=A⋅82t(8) = A \cdot 8^2

    This runtime prediction follows consistently from your incorrect power-law equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the quadratic power p=2p = 2 from the benchmark data.

You correctly set up the conversion from microseconds to seconds.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Unit Conversion Factor

You divided by 10241024 when converting from gigabytes to megabytes, even though 1 GB1\text{ GB} contains 1024 MB1024\text{ MB}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the unit equality 1 GB=1024 MB1\text{ GB} = 1024\text{ MB} with the algebraic relationship between the numerical variables: expressing a quantity in a smaller unit requires multiplying the numerical value by the conversion factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Unit Scale Direction
  • Converting a quantity to a smaller unit increases its numerical value, while converting to a larger unit decreases its numerical value.

  • Always substitute Nsmaller=(factor)⋅NlargerN_{\text{smaller}} = (\text{factor}) \cdot N_{\text{larger}} into equations calibrated in smaller units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express input size NN gigabytes in megabytes: NMB=1024⋅NN_{\text{MB}} = 1024 \cdot N.

  2. Substitute NMB=1024⋅NN_{\text{MB}} = 1024 \cdot N and ts=tμs106t_{\text{s}} = \frac{t_{\mu\text{s}}}{10^6} into the benchmark equation: t(N)=2048⋅(1024⋅N)2106t(N) = \frac{2048 \cdot (1024 \cdot N)^2}{10^6}.

  3. Simplify the coefficient or apply the calibrated model t(N)=2.097152×103⋅N2 st(N) = 2.097152 \times 10^3 \cdot N^2\text{ s}.

  4. Evaluate at N=8N = 8: t(8)=2097.152⋅64=1.34217728×105 st(8) = 2097.152 \cdot 64 = 1.34217728 \times 10^5\text{ s}.

Final answer

t(N)=2.097152×103⋅N2 st(N) = 2.097152 \times 10^3 \cdot N^2\text{ s}, yielding t(8)=1.34217728×105 st(8) = 1.34217728 \times 10^5\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that substituting a larger unit (1 GB1\text{ GB}) into an equation requiring megabytes produces 10241024, not 11024\frac{1}{1024}.

  • Practice variable substitution with mixed metric/binary prefixes before squaring or raising terms to a power.

OverviewACEpath Teacher's Diagnosis

03 The student converts N from GB to MB linearly without squaring the conversion factor 1024 in the formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    tμs=2048⋅(NMB)2  ⟹  p=2t_{\mu\text{s}} = 2048 \cdot (N_{\text{MB}})^2 \implies p = 2

  2. Step 2

    ts=2048⋅1024⋅N2106  ⟹  t(N)=2.097152⋅N2t_{\text{s}} = \frac{2048 \cdot 1024 \cdot N^2}{10^6} \implies t(N) = 2.097152 \cdot N^2

    Correct

    t(N)=2.097152×103⋅N2 s(or 2097.152⋅N2 s)t(N) = 2.097152 \times 10^3 \cdot N^2\text{ s} \quad (\text{or } 2097.152 \cdot N^2\text{ s})

    When substituting NMB=1024⋅NGBN_{\text{MB}} = 1024 \cdot N_{\text{GB}} into (NMB)2(N_{\text{MB}})^2, the conversion factor of 10241024 must also be squared: (1024⋅N)2=10242⋅N2(1024 \cdot N)^2 = 1024^2 \cdot N^2. You included 10241024 only linearly, making your model coefficient too small.

  3. Step 3

    t(8)=2.097152⋅82  ⟹  t(8)=2.097152⋅64  ⟹  t(8)=134.217728 st(8) = 2.097152 \cdot 8^2 \implies t(8) = 2.097152 \cdot 64 \implies t(8) = 134.217728\text{ s}

    Correct

    t(8)=2097.152⋅64=1.34217728×105 st(8) = 2097.152 \cdot 64 = 1.34217728 \times 10^5\text{ s}

    You correctly substituted N=8N = 8 and computed 82=648^2 = 64, but your final numerical answer is affected by the missing factor from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined that doubling NN quadruples runtime, giving p=2p = 2.

You correctly formulated the baseline equation in megabytes and microseconds.

You accurately calculated 82=648^2 = 64 and correctly multiplied your derived coefficient by 6464.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of exponent on unit conversion factor

You converted gigabytes to megabytes using a single linear factor of 10241024 rather than squaring (1024)2(1024)^2 inside the quadratic term.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a variable inside a power-law expression y=A⋅xpy = A \cdot x^p undergoes a unit conversion x=c⋅ux = c \cdot u, the conversion constant must also be raised to the power pp: (c⋅u)p=cp⋅up(c \cdot u)^p = c^p \cdot u^p.

REASONING PATH
Your ACEpath teacher’s suggested approach
Square the Entire Substitution
  • (c⋅x)p=cp⋅xp(c \cdot x)^p = c^p \cdot x^p

  • Write parentheses around the complete substitution (1024⋅N)2(1024 \cdot N)^2 before distributing the exponent to both 10241024 and NN.

Dimensional Scaling Check
  • If a quantity scales with degree pp, its unit conversion factor scales with degree pp.

  • Verify that converting units for an N2N^2 term scales by the square of the conversion ratio, not the linear ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute NMB=1024⋅NGBN_{\text{MB}} = 1024 \cdot N_{\text{GB}} into the squared term: (NMB)2=(1024⋅N)2=10242⋅N2(N_{\text{MB}})^2 = (1024 \cdot N)^2 = 1024^2 \cdot N^2.

  2. Calibrate the leading coefficient to express runtime in seconds: A=2097.152=2.097152×103A = 2097.152 = 2.097152 \times 10^3, giving t(N)=2.097152×103⋅N2 st(N) = 2.097152 \times 10^3 \cdot N^2\text{ s}.

  3. Evaluate for N=8 GBN = 8\text{ GB}: t(8)=2097.152⋅82=2097.152⋅64=1.34217728×105 st(8) = 2097.152 \cdot 8^2 = 2097.152 \cdot 64 = 1.34217728 \times 10^5\text{ s}.

Final answer

t(N)=2.097152×103⋅N2 st(N) = 2.097152 \times 10^3 \cdot N^2\text{ s} (or 2097.152⋅N2 s2097.152 \cdot N^2\text{ s}), yielding t(8 GB)=1.34217728×105 st(8\text{ GB}) = 1.34217728 \times 10^5\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write parentheses around an entire variable substitution before applying an exponent, as in (c⋅x)p=cp⋅xp(c \cdot x)^p = c^p \cdot x^p.

  • Check units dimensionally: verify that quadratic terms carry squared conversion factors and cubic terms carry cubed conversion factors.

Lock it in

Similar question

01

An algorithm takes t=50 μst = 50\,\mu\text{s} for N=1 KBN = 1\text{ KB} and t=200 μst = 200\,\mu\text{s} for N=2 KBN = 2\text{ KB}. Express the power-law model t(N)=A⋅Npt(N) = A \cdot N^p where NN is in megabytes (1 MB=1000 KB1\text{ MB} = 1000\text{ KB}) and tt is in seconds (1 s=106 μs1\text{ s} = 10^6\,\mu\text{s}).

Answer

t(N)=50⋅N2 st(N) = 50 \cdot N^2\text{ s}. Key steps: 20050=4=22  ⟹  p=2\frac{200}{50} = 4 = 2^2 \implies p = 2. In benchmark units, t=50⋅NKB2 μst = 50 \cdot N_{\text{KB}}^2\,\mu\text{s}. Substituting NKB=1000NMBN_{\text{KB}} = 1000 N_{\text{MB}} yields t=50⋅106⋅NMB2 μst = 50 \cdot 10^6 \cdot N_{\text{MB}}^2\,\mu\text{s}. Converting to seconds divides by 10610^6, giving A=50A = 50.

02

A database query has runtime t=3 mst = 3\text{ ms} for N=100N = 100 records and t=24 mst = 24\text{ ms} for N=200N = 200 records. Formulate t(N)=A⋅Npt(N) = A \cdot N^p with NN measured in thousands of records (1 k-records=1000 records1\text{ k-records} = 1000\text{ records}) and tt in seconds. Then find tt for 5 k-records5\text{ k-records}.

Answer

t(N)=3⋅N3 st(N) = 3 \cdot N^3\text{ s} and t(5)=375 st(5) = 375\text{ s}. Key steps: doubling NN multiplies runtime by 243=8=23  ⟹  p=3\frac{24}{3} = 8 = 2^3 \implies p = 3. At N=1000 records=1 k-recordsN = 1000\text{ records} = 1\text{ k-records}, runtime is 3⋅(10)3 ms=3000 ms=3 s3 \cdot (10)^3\text{ ms} = 3000\text{ ms} = 3\text{ s}. Thus A=3 sA = 3\text{ s}. For N=5N = 5, t(5)=3⋅53=375 st(5) = 3 \cdot 5^3 = 375\text{ s}.

03

A matrix factorization benchmark records runtimes: t(512)=1.6 mst(512) = 1.6\text{ ms} and t(1024)=12.8 mst(1024) = 12.8\text{ ms}, where NN is the matrix dimension. Construct a runtime model t(N)=A⋅Npt(N) = A \cdot N^p with tt in seconds. What is the predicted runtime in seconds for N=4096N = 4096?

Answer

t(N)=1.19209...×10−11⋅N3 st(N) = 1.19209... \times 10^{-11} \cdot N^3\text{ s} and t(4096)=819.2 st(4096) = 819.2\text{ s}. Key steps: 12.81.6=8=23  ⟹  p=3\frac{12.8}{1.6} = 8 = 2^3 \implies p = 3. Each doubling scales time by 88. From N=1024N = 1024 to N=4096N = 4096 is two doublings (4×4\times), so runtime scales by 82=648^2 = 64. t(4096)=12.8 ms×64=819.2 ms=0.8192 st(4096) = 12.8\text{ ms} \times 64 = 819.2\text{ ms} = 0.8192\text{ s} (or using seconds directly: 0.0128 s×64=0.8192 s0.0128\text{ s} \times 64 = 0.8192\text{ s}).

Loading workspace…