Resources

An electric circuit containing a capacitor and resistor discharges according to the voltage model V(t)=V0e−t/τV(t) = V_0 e^{-t/\tau}, where V0=24.0 VV_0 = 24.0\text{ V} and time constant τ=3.50 s\tau = 3.50\text{ s}. Under standard passive sign conventions, the instantaneous rate of voltage change is defined as the time derivative dVdt\frac{dV}{dt}. Evaluate the exact signed rate of voltage change dVdt\frac{dV}{dt} at t=5.00 st = 5.00\text{ s}, ensuring the correct mathematical sign is preserved to reflect a discharging potential. Round your answer to two decimal places and include appropriate units.

Answer and steps

Final answer

dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

Steps

01

Differentiate the voltage function

To find the instantaneous rate of voltage change dVdt\frac{dV}{dt}, we differentiate the voltage model with respect to time tt using the chain rule.

The voltage across the discharging capacitor is given by: V(t)=V0e−t/τV(t) = V_0 e^{-t/\tau}

Taking the derivative with respect to time tt: dVdt=ddt(V0e−t/τ)=V0⋅(−1τ)e−t/τ=−V0τe−t/τ\frac{dV}{dt} = \frac{d}{dt}\left(V_0 e^{-t/\tau}\right) = V_0 \cdot \left(-\frac{1}{\tau}\right) e^{-t/\tau} = -\frac{V_0}{\tau} e^{-t/\tau}

02

Substitute the given parameters

We are given:

  • Initial voltage: V0=24.0 VV_0 = 24.0\text{ V}
  • Time constant: τ=3.50 s\tau = 3.50\text{ s}
  • Time: t=5.00 st = 5.00\text{ s}

Substitute these values into the derivative: dVdt=−24.03.50e−5.00/3.50\frac{dV}{dt} = -\frac{24.0}{3.50} e^{-5.00 / 3.50}

03

Compute the numerical value

First, calculate the pre-exponential factor: −24.03.50≈−6.8571 V/s-\frac{24.0}{3.50} \approx -6.8571\text{ V/s}

Next, evaluate the exponential factor: −5.003.50=−107≈−1.4286-\frac{5.00}{3.50} = -\frac{10}{7} \approx -1.4286 e−1.4286≈0.2397e^{-1.4286} \approx 0.2397

Multiply the two factors: dVdt≈−6.8571×0.2397≈−1.6433 V/s\frac{dV}{dt} \approx -6.8571 \times 0.2397 \approx -1.6433\text{ V/s}

Rounding to two decimal places gives: dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

Common Pitfall: When evaluating rates of change for discharging or decaying quantities, remember that the rate dVdt\frac{dV}{dt} is inherently negative because voltage decreases over time. Do not drop the negative sign from the chain rule.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign from the inner derivative via the chain rule, resulting in a positive rate of change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V(t)=24.0e−t/3.50V(t) = 24.0 e^{-t/3.50}

  2. Step 2

    dVdt=(24.03.50)e−t/3.50\frac{dV}{dt} = \left(\frac{24.0}{3.50}\right) e^{-t/3.50}

    Correct

    dVdt=−(24.03.50)e−t/3.50\frac{dV}{dt} = -\left(\frac{24.0}{3.50}\right) e^{-t/3.50}

    When differentiating e−t/3.50e^{-t/3.50} using the chain rule, the derivative of the exponent −t3.50-\frac{t}{3.50} is −13.50-\frac{1}{3.50}, which introduces a leading negative sign.

  3. Step 3

    dVdt=6.86e−5.00/3.50\frac{dV}{dt} = 6.86 e^{-5.00/3.50}

    Correct

    dVdt=−6.86e−5.00/3.50\frac{dV}{dt} = -6.86 e^{-5.00/3.50}

    You substituted t=5.00 st = 5.00\text{ s} and evaluated 24.03.50≈6.86\frac{24.0}{3.50} \approx 6.86 correctly, but this step inherits the omitted negative sign from your previous line.

  4. Step 4

    dVdt=1.64 V/s\frac{dV}{dt} = 1.64\text{ V/s}

    Correct

    dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

    Your numerical computation and unit assignment are correct, but the final value must be negative because the capacitor is discharging.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the given circuit parameters into the exponential decay equation.

You evaluated the exponential function and numerical values with high precision.

You included the appropriate derived unit, V/s\text{V/s}, in your final answer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted negative sign during exponential chain rule differentiation

You differentiated e−t/τe^{-t/\tau} as 1τe−t/τ\frac{1}{\tau} e^{-t/\tau} instead of −1τe−t/τ-\frac{1}{\tau} e^{-t/\tau}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the derivative of the inner linear function −tτ-\frac{t}{\tau} when applying the chain rule to exponential decay models.

REASONING PATH
Your ACEpath teacher’s suggested approach
Chain Rule for Exponential Decay
  • For any constant kk, ddt[e−kt]=−ke−kt\frac{d}{dt}\left[e^{-kt}\right] = -k e^{-kt}.

  • Always write out the inner derivative explicitly: ddt(−tτ)=−1τ\frac{d}{dt}\left(-\frac{t}{\tau}\right) = -\frac{1}{\tau} before simplifying.

Physical Reality Check
  • A discharging circuit loses potential over time, meaning dVdt<0\frac{dV}{dt} < 0.

  • Verify that your calculated derivative matches the physical direction of the process: decay or discharge must yield a negative rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute t=5.00 st = 5.00\text{ s}: dVdt=−24.03.50e−5.00/3.50\frac{dV}{dt} = -\frac{24.0}{3.50} e^{-5.00/3.50}

  2. Evaluate the coefficient: −24.03.50≈−6.8571 V/s-\frac{24.0}{3.50} \approx -6.8571\text{ V/s}

  3. Evaluate the exponential term: e−1.4286≈0.2397e^{-1.4286} \approx 0.2397

  4. Multiply the factors: −6.8571×0.2397≈−1.6433 V/s-6.8571 \times 0.2397 \approx -1.6433\text{ V/s}

Final answer

dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking derivatives of expressions with negative exponents, ensuring you factor out the negative sign.

  • Perform a physical sign check on decay problems: since voltage decreases, the instantaneous rate of change must be negative.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by the time constant τ instead of dividing by τ when applying the chain rule to e^(-t/τ).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dVdt=−V0⋅τ⋅e(−t/τ)\frac{dV}{dt} = -V_0 \cdot \tau \cdot e^{(-t/\tau)}

    Correct

    dVdt=−V0τe−t/τ\frac{dV}{dt} = -\frac{V_0}{\tau} e^{-t/\tau}

    When differentiating e−t/τ=e−1τte^{-t/\tau} = e^{-\frac{1}{\tau}t} with respect to tt, the inner derivative is −1τ-\frac{1}{\tau}, which places τ\tau in the denominator rather than multiplying it.

  2. Step 2

    dVdt=−24.0×3.50×e(−5.00/3.50)  ⟹  dVdt=−84.0×0.240\frac{dV}{dt} = -24.0 \times 3.50 \times e^{(-5.00/3.50)} \implies \frac{dV}{dt} = -84.0 \times 0.240

    Correct

    dVdt=−24.03.50×e−5.00/3.50  ⟹  dVdt≈−6.857×0.240\frac{dV}{dt} = -\frac{24.0}{3.50} \times e^{-5.00/3.50} \implies \frac{dV}{dt} \approx -6.857 \times 0.240

    You substituted your given values into your derivative correctly and calculated the exponential value accurately, but the numerical product was affected by multiplying by 3.503.50 instead of dividing by 3.503.50.

  3. Step 3

    dVdt=−20.13 V/s\frac{dV}{dt} = -20.13\text{ V/s}

    Correct

    dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

    Your final value inherits the scaling error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the voltage is decreasing and included a negative sign for the discharging rate.

You correctly evaluated the numerical exponential factor e−5.00/3.50≈0.240e^{-5.00/3.50} \approx 0.240.

You included the correct physical units V/s\text{V/s} in your final answer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Chain Rule Inversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the coefficient of tt in −tτ-\frac{t}{\tau} as −τ-\tau instead of −1τ-\frac{1}{\tau}, multiplying the expression by τ\tau rather than dividing by it when taking the derivative.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiating Linear Arguments in Exponentials
  • For a constant kk, ddt(ekt)=kekt\frac{d}{dt}\left(e^{kt}\right) = k e^{kt}. When the exponent is −tτ-\frac{t}{\tau}, the constant multiplier is k=−1τk = -\frac{1}{\tau}.

  • Rewrite −tτ-\frac{t}{\tau} explicitly as (−1τ)t\left(-\frac{1}{\tau}\right)t before differentiating so the inner derivative −1τ-\frac{1}{\tau} is clearly visible.

Dimensional Analysis Check
  • The derivative dVdt\frac{dV}{dt} has units of V/s\text{V/s}. In the formula −V0τe−t/τ-\frac{V_0}{\tau}e^{-t/\tau}, the units are Vs\frac{\text{V}}{\text{s}}, which matches.

  • Check that your derivative's pre-factor has units of quantitytime\frac{\text{quantity}}{\text{time}}; multiplying V0⋅τV_0 \cdot \tau would yield V⋅s\text{V}\cdot\text{s}, signaling that τ\tau belongs in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. dVdt=ddt(V0e−t/τ)=V0⋅(−1τ)e−t/τ=−V0τe−t/τ\frac{dV}{dt} = \frac{d}{dt}\left(V_0 e^{-t/\tau}\right) = V_0 \cdot \left(-\frac{1}{\tau}\right) e^{-t/\tau} = -\frac{V_0}{\tau} e^{-t/\tau}

  2. dVdt=−24.0 V3.50 s⋅e−5.00/3.50≈−6.8571×0.2397 V/s\frac{dV}{dt} = -\frac{24.0\text{ V}}{3.50\text{ s}} \cdot e^{-5.00/3.50} \approx -6.8571 \times 0.2397\text{ V/s}

  3. dVdt≈−1.6433 V/s\frac{dV}{dt} \approx -1.6433\text{ V/s}

Final answer

dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking derivatives of exponential decay terms of the form e−t/Te^{-t/T} to reinforce dividing by the constant rather than multiplying.

  • Use dimensional analysis on your symbolic derivative before plugging in numbers to verify that time appears in the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student evaluates the voltage V(5.00) rather than finding the derivative dV/dt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dVdt=24.0e(−5.00/3.50)  ⟹  dVdt=24.0×0.2397\frac{dV}{dt} = 24.0 e^{(-5.00/3.50)} \implies \frac{dV}{dt} = 24.0 \times 0.2397

    Correct

    dVdt=−V0τe−t/τ=−24.03.50e−5.00/3.50≈−6.8571×0.2397\frac{dV}{dt} = -\frac{V_0}{\tau} e^{-t/\tau} = -\frac{24.0}{3.50} e^{-5.00/3.50} \approx -6.8571 \times 0.2397

    You substituted the values directly into the original voltage formula V(t)=V0e−t/τV(t) = V_0 e^{-t/\tau} rather than differentiating it first. To find dVdt\frac{dV}{dt}, apply the chain rule: ddt(e−t/τ)=−1τe−t/τ\frac{d}{dt}\left(e^{-t/\tau}\right) = -\frac{1}{\tau} e^{-t/\tau}.

  2. Step 2

    dVdt=5.75 V/s\frac{dV}{dt} = 5.75\text{ V/s}

    Correct

    dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

    Carrying forward the value from the undifferentiated formula gives 5.75 V/s5.75\text{ V/s}, which is actually the voltage V(5.00 s)≈5.75 VV(5.00\text{ s}) \approx 5.75\text{ V}, not the rate of change.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the exponential decay factor e−5.00/3.50≈0.2397e^{-5.00/3.50} \approx 0.2397.

You correctly identified the unit of rate as V/s\text{V/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Differentiating vs. Evaluating Original Function

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the rate of change dVdt\frac{dV}{dt} as equivalent to evaluating the state function V(t)V(t) at the given time, missing the differentiation step and the chain rule factor −1τ-\frac{1}{\tau}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Function Value vs. Rate of Change
  • The function V(t)V(t) represents the instantaneous voltage at time tt, whereas dVdt\frac{dV}{dt} represents the slope or rate at which voltage changes with time.

  • Always differentiate the model symbolically before substituting numerical values whenever a rate of change is requested.

Chain Rule with Exponentials
  • For an exponential model f(t)=Aektf(t) = A e^{kt}, the time derivative is dfdt=kAekt\frac{df}{dt} = k A e^{kt}.

  • When differentiating e−t/τe^{-t/\tau}, remember to bring down the inner derivative k=−1τk = -\frac{1}{\tau} as a multiplier.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate V(t)=V0e−t/τV(t) = V_0 e^{-t/\tau} with respect to time: dVdt=V0(−1τ)e−t/τ=−V0τe−t/τ\frac{dV}{dt} = V_0 \left(-\frac{1}{\tau}\right) e^{-t/\tau} = -\frac{V_0}{\tau} e^{-t/\tau}.

  2. Substitute V0=24.0 VV_0 = 24.0\text{ V}, τ=3.50 s\tau = 3.50\text{ s}, and t=5.00 st = 5.00\text{ s}: dVdt=−24.03.50e−5.00/3.50\frac{dV}{dt} = -\frac{24.0}{3.50} e^{-5.00/3.50}.

  3. Evaluate the numerical product: −24.03.50×0.2397≈−6.8571×0.2397≈−1.6433 V/s-\frac{24.0}{3.50} \times 0.2397 \approx -6.8571 \times 0.2397 \approx -1.6433\text{ V/s}.

Final answer

dVdt=−1.64 V/s\frac{dV}{dt} = -1.64\text{ V/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between a quantity y(t)y(t) and its rate of change dydt\frac{dy}{dt}.

  • Practice applying the chain rule to exponential decay functions of the form f(t)=Ae−ktf(t) = A e^{-k t}.

Lock it in

Similar question

01

A cooling liquid follows the temperature model T(t)=80e−0.05tT(t) = 80 e^{-0.05 t}, where TT is in degrees Celsius and tt is in minutes. Find the exact rate of cooling dTdt\frac{dT}{dt} at t=20 mint = 20\text{ min}, rounded to two decimal places.

Answer

dTdt=−1.47∘C/min\frac{dT}{dt} = -1.47^\circ\text{C/min}. First find the derivative: dTdt=80(−0.05)e−0.05t=−4e−0.05t\frac{dT}{dt} = 80(-0.05)e^{-0.05t} = -4e^{-0.05t}. Then substitute t=20t = 20: −4e−1≈−1.4715≈−1.47∘C/min-4e^{-1} \approx -1.4715\approx -1.47^\circ\text{C/min}.

02

A radioactive sample decays according to N(t)=500e−t/12.0N(t) = 500 e^{-t / 12.0}, where NN is measured in grams and tt in days. Determine the signed rate of change of mass dNdt\frac{dN}{dt} at t=6.0 dayst = 6.0\text{ days}. Round to two decimal places and include units.

Answer

dNdt=−25.27 g/day\frac{dN}{dt} = -25.27\text{ g/day}. Differentiating yields dNdt=−50012.0e−t/12.0\frac{dN}{dt} = -\frac{500}{12.0}e^{-t/12.0}. Evaluating at t=6.0t = 6.0 gives −50012.0e−0.5≈−41.67×0.6065≈−25.27 g/day-\frac{500}{12.0}e^{-0.5} \approx -41.67 \times 0.6065 \approx -25.27\text{ g/day}.

03

An inductor current decays according to i(t)=I0e−Rt/Li(t) = I_0 e^{-R t / L}, with I0=4.50 AI_0 = 4.50\text{ A}, R=15.0  ΩR = 15.0\;\Omega, and L=2.50 HL = 2.50\text{ H}. Calculate the rate of change of current didt\frac{di}{dt} at t=0.200 st = 0.200\text{ s}. Round to two decimal places.

Answer

didt=−8.13 A/s\frac{di}{dt} = -8.13\text{ A/s}. Differentiate with respect to tt: didt=I0(−RL)e−Rt/L=4.50×(−6.00)e−6.00(0.200)=−27.0e−1.20≈−8.132 A/s\frac{di}{dt} = I_0 \left(-\frac{R}{L}\right) e^{-R t / L} = 4.50 \times (-6.00) e^{-6.00(0.200)} = -27.0 e^{-1.20} \approx -8.132\text{ A/s}.

Loading workspace…