Resources

An industrial storage silo is modeled as a cylinder of base radius rr and height hh. The surface area (including both circular ends) is given by S=2πr2+2πrhS = 2\pi r^2 + 2\pi r h. If the silo must enclose a fixed volume of V0=250π m3V_0 = 250\pi\text{ m}^3, express the height hh solely as a function of the radius rr, specify the restricted physical domain of rr in interval notation, and find the value of rr that minimizes SS, stating the result with appropriate exact symbols and SI units.

Answer and steps

Final answer

h(r)=250r2 mh(r) = \frac{250}{r^2}\text{ m}; domain: r∈(0,∞) mr \in (0, \infty)\text{ m}; minimizing radius: r=5 mr = 5\text{ m}

Steps

01

Express Height hh in Terms of Radius rr

The volume of a cylinder with radius rr and height hh is given by: V=πr2hV = \pi r^2 h

Given that the silo has a fixed volume V0=250π m3V_0 = 250\pi\text{ m}^3, equate the two expressions: πr2h=250π\pi r^2 h = 250\pi

Dividing both sides by πr2\pi r^2 gives hh as a function of rr: h(r)=250r2 mh(r) = \frac{250}{r^2}\text{ m}


02

Determine the Physical Domain of rr

For a physical cylinder to exist:

  • The radius must be strictly positive: r>0r > 0.
  • As rr grows arbitrarily large, the height hh becomes very small while still enclosing the required volume, meaning there is no theoretical upper bound.

In interval notation, the physical domain is: r∈(0,∞) mr \in (0, \infty)\text{ m}


03

Minimize the Surface Area SS

Substitute h(r)=250r2h(r) = \frac{250}{r^2} into the total surface area formula S=2πr2+2πrhS = 2\pi r^2 + 2\pi r h: S(r)=2πr2+2πr(250r2)=2πr2+500πrS(r) = 2\pi r^2 + 2\pi r \left(\frac{250}{r^2}\right) = 2\pi r^2 + \frac{500\pi}{r}

To find the value of rr that minimizes SS, compute the first derivative with respect to rr: dSdr=4πr−500πr2\frac{\mathrm{d}S}{\mathrm{d}r} = 4\pi r - \frac{500\pi}{r^2}

Set the derivative equal to zero to find the critical point: 4πr−500πr2=04\pi r - \frac{500\pi}{r^2} = 0 4πr=500πr24\pi r = \frac{500\pi}{r^2} r3=500π4π=125r^3 = \frac{500\pi}{4\pi} = 125 r=1253=5 mr = \sqrt[3]{125} = 5\text{ m}


04

Verify the Minimum

Compute the second derivative: d2Sdr2=4π+1000πr3\frac{\mathrm{d}^2S}{\mathrm{d}r^2} = 4\pi + \frac{1000\pi}{r^3}

For any r>0r > 0, both terms are positive: d2Sdr2∣r=5=4π+1000π125=4π+8π=12π>0\left.\frac{\mathrm{d}^2S}{\mathrm{d}r^2}\right|_{r=5} = 4\pi + \frac{1000\pi}{125} = 4\pi + 8\pi = 12\pi > 0

By the second derivative test, the surface area is concave up throughout its domain, confirming that r=5 mr = 5\text{ m} uniquely minimizes SS.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student differentiates 1/r as ln(r) or a positive power instead of applying the negative power rule, obtaining an incorrect critical point equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=πr2h=250π  ⟹  h=250/r2V = \pi r^2 h = 250\pi \implies h = 250/r^2

  2. Step 2

    (0,∞)(0, \infty)

  3. Step 3

    S=2πr2+2πr(250r2)=2πr2+500πrS = 2\pi r^2 + 2\pi r\left(\frac{250}{r^2}\right) = 2\pi r^2 + \frac{500\pi}{r}

  4. Step 4

    S′=4πr+500πr2=0S' = 4\pi r + \frac{500\pi}{r^2} = 0

    Correct

    S′(r)=4πr−500πr2=0S'(r) = 4\pi r - \frac{500\pi}{r^2} = 0

    When differentiating 500πr−1500\pi r^{-1} with respect to rr, the power rule gives −500πr−2-500\pi r^{-2}, introducing a minus sign that was omitted here.

  5. Step 5

    4πr=−500πr2  ⟹  r3=−125  ⟹  r=−5 m4\pi r = -\frac{500\pi}{r^2} \implies r^3 = -125 \implies r = -5\text{ m}

    Correct

    4πr=500πr2  ⟹  r3=125  ⟹  r=5 m4\pi r = \frac{500\pi}{r^2} \implies r^3 = 125 \implies r = 5\text{ m}

    Because of the missing negative sign in the derivative, your equation yielded r3=−125r^3 = -125 instead of r3=125r^3 = 125.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated hh in terms of rr using the cylinder volume formula.

You stated the correct restricted domain for the radius in interval notation.

You correctly substituted hh into the total surface area formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Derivative of negative powers

Dropping the minus sign from ddr(r−1)=−r−2\frac{\mathrm{d}}{\mathrm{d}r}(r^{-1}) = -r^{-2} during differentiation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You differentiated the reciprocal term 1r=r−1\frac{1}{r} = r^{-1} without applying the negative sign produced by the power rule ddr(rn)=nrn−1\frac{\mathrm{d}}{\mathrm{d}r}(r^n) = n r^{n-1} when n=−1n = -1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule for Negative Exponents
  • ddr(r−1)=−1⋅r−2=−1r2\frac{\mathrm{d}}{\mathrm{d}r}\left(r^{-1}\right) = -1 \cdot r^{-2} = -\frac{1}{r^2}

  • Rewrite reciprocal terms with explicit negative exponents before differentiating so the negative multiplier is not lost.

Domain Sanity Check
  • A physical radius must satisfy r>0r > 0.

  • If a critical point yields a negative length, pause and check the sign of each derivative term.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rewrite the surface area with power notation: S(r)=2πr2+500πr−1S(r) = 2\pi r^2 + 500\pi r^{-1}.

  2. Differentiate with respect to rr: S′(r)=4πr−500πr−2=4πr−500πr2S'(r) = 4\pi r - 500\pi r^{-2} = 4\pi r - \frac{500\pi}{r^2}.

  3. Set S′(r)=0S'(r) = 0: 4πr=500πr2  ⟹  4πr3=500π4\pi r = \frac{500\pi}{r^2} \implies 4\pi r^3 = 500\pi.

  4. Solve for rr: r3=500π4π=125  ⟹  r=5 mr^3 = \frac{500\pi}{4\pi} = 125 \implies r = 5\text{ m}.

Final answer

h(r)=250r2 mh(r) = \frac{250}{r^2}\text{ m}; domain: r∈(0,∞) mr \in (0, \infty)\text{ m}; minimizing radius: r=5 mr = 5\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write reciprocal terms such as cr\frac{c}{r} as cr−1c r^{-1} before taking the derivative.

  • Check your critical values against your stated domain to catch unexpected sign flips immediately.

OverviewACEpath Teacher's Diagnosis

02 The student models the silo as an open-top cylinder by omitting one circular base from the surface area formula, leading to an incorrect optimal radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    πr2h=250π  ⟹  h=250r2\pi r^2 h = 250\pi \implies h = \frac{250}{r^2}

  2. Step 2

    (0,∞)(0, \infty)

  3. Step 3

    S=πr2+2πrh=πr2+500πrS = \pi r^2 + 2\pi r h = \pi r^2 + \frac{500\pi}{r}

    Correct

    S=2πr2+2πrh=2πr2+500πrS = 2\pi r^2 + 2\pi r h = 2\pi r^2 + \frac{500\pi}{r}

    You used πr2\pi r^2 for the base area rather than 2πr22\pi r^2. The problem explicitly specifies a closed cylinder including both circular ends.

  4. Step 4

    S′=2πr−500πr2=0  ⟹  2πr3=500π  ⟹  r3=250  ⟹  r=523 mS' = 2\pi r - \frac{500\pi}{r^2} = 0 \implies 2\pi r^3 = 500\pi \implies r^3 = 250 \implies r = 5\sqrt[3]{2}\text{ m}

    Correct

    S′=4πr−500πr2=0  ⟹  4πr3=500π  ⟹  r3=125  ⟹  r=5 mS' = 4\pi r - \frac{500\pi}{r^2} = 0 \implies 4\pi r^3 = 500\pi \implies r^3 = 125 \implies r = 5\text{ m}

    Your derivative and solving steps were algebraically sound, but the result is affected by omitting the second circular base in your objective function.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately solved for height hh from the fixed cylinder volume constraint.

You correctly identified the physical domain as (0,∞)(0, \infty).

You correctly applied the power rule to differentiate your objective function and solve for the critical radius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary / Boundary Condition Error

You accidentally omitted the top circular cap from the surface area, writing πr2\pi r^2 instead of 2πr22\pi r^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the explicit specification of 'including both circular ends' led to modeling an open-top cylinder rather than a fully enclosed cylinder.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Boundary Enclosures
  • A closed cylinder has two circular bases (2πr22\pi r^2), while an open cylinder has only one (πr2\pi r^2).

  • Always re-read the geometry description before writing the objective function to confirm whether ends are open or closed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the total surface area: S(r)=2πr2+2πr(250r2)=2πr2+500πrS(r) = 2\pi r^2 + 2\pi r \left(\frac{250}{r^2}\right) = 2\pi r^2 + \frac{500\pi}{r}.

  2. Differentiate with respect to rr: S′(r)=4πr−500πr2S'(r) = 4\pi r - \frac{500\pi}{r^2}.

  3. Set S′(r)=0S'(r) = 0: 4πr=500πr2  ⟹  r3=500π4π=1254\pi r = \frac{500\pi}{r^2} \implies r^3 = \frac{500\pi}{4\pi} = 125.

  4. Solve for rr: r=1253=5 mr = \sqrt[3]{125} = 5\text{ m}.

Final answer

r=5 mr = 5\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the problem statement specifically for geometry descriptors like 'open top', 'closed', or 'both ends'.

  • Double-check the objective equation against the given formula before taking the derivative.

OverviewACEpath Teacher's Diagnosis

03 The student includes zero in the physical domain of the radius and incorrectly includes it in the interval notation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    πr2h=250π  ⟹  h=250r2\pi r^2 h = 250\pi \implies h = \frac{250}{r^2}

  2. Step 2

    [0,∞)[0, \infty)](streamdown:incomplete-link)

    Correct

    r∈(0,∞) mr \in (0, \infty)\text{ m}

    You used a closed bracket at 00. A physical cylinder enclosing a non-zero volume must have a strictly positive radius (r>0r > 0), because setting r=0r = 0 results in zero volume and an undefined height 25002\frac{250}{0^2}.

  3. Step 3

    S=2πr2+500πr  ⟹  S′=4πr−500πr2=0S = 2\pi r^2 + \frac{500\pi}{r} \implies S' = 4\pi r - \frac{500\pi}{r^2} = 0

  4. Step 4

    4r3=500  ⟹  r3=125  ⟹  r=5 m4r^3 = 500 \implies r^3 = 125 \implies r = 5\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the cylinder volume to radius and height to express h(r)h(r).

You accurately differentiated the surface area function with respect to rr.

You found the correct critical radius r=5 mr = 5\text{ m} and stated it with the correct SI unit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Closed interval at a non-physical boundary

You recognized that rr cannot be negative, but you used a square bracket [0[0 instead of an open parenthesis (0(0.](streamdown:incomplete-link)

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing non-negativity (r≥0r \ge 0) with strict physical existence (r>0r > 0), overlooking that a geometric dimension must be strictly positive and cannot cause division by zero in rational formulas like h=V0πr2h = \frac{V_0}{\pi r^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Boundary Test for Physical Dimensions
  • Lengths, radii, and widths must be strictly positive (x>0x > 0) unless a degenerate zero-measure object is explicitly permitted.

  • Always test r=0r = 0 in both the physical scenario and the algebraic formula to verify whether the boundary point is physically and mathematically defined.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Check the formula h(r)=250r2h(r) = \frac{250}{r^2}: if r=0r = 0, the denominator becomes zero, which is undefined.

  2. Check the physical constraint: enclosing a positive volume of 250π m3250\pi\text{ m}^3 requires non-zero spatial dimensions, so r>0r > 0.

  3. Express strict positivity r>0r > 0 with no upper bound in interval notation using an open parenthesis: r∈(0,∞) mr \in (0, \infty)\text{ m}.

Final answer

h(r)=250r2 mh(r) = \frac{250}{r^2}\text{ m}; domain: r∈(0,∞) mr \in (0, \infty)\text{ m}; minimizing radius: r=5 mr = 5\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review interval notation to distinguish open intervals (a,b)(a, b) from closed intervals [a,b][a, b].

  • Whenever defining a domain for an applied geometry problem, verify that boundary values do not lead to zero denominators or non-existent shapes.

Lock it in

Similar question

01

An open-top cylindrical container must hold a fixed volume of V=16π m3V = 16\pi\text{ m}^3. Express its total surface area A(r)=πr2+2πrhA(r) = \pi r^2 + 2\pi r h purely as a function of the radius rr, and find the radius r>0r > 0 that minimizes AA.

Answer

r=223 mr = 2\sqrt[3]{2}\text{ m}. Steps: h=16r2  ⟹  A(r)=πr2+32πrh = \frac{16}{r^2} \implies A(r) = \pi r^2 + \frac{32\pi}{r}. Differentiating gives A′(r)=2πr−32πr2=0  ⟹  2r3=32  ⟹  r3=16  ⟹  r=223 mA'(r) = 2\pi r - \frac{32\pi}{r^2} = 0 \implies 2r^3 = 32 \implies r^3 = 16 \implies r = 2\sqrt[3]{2}\text{ m}.

02

A closed rectangular box with a square base of side length xx (in meters) and height yy must enclose a volume of 108 m3108\text{ m}^3. Express its surface area S(x)S(x) as a function of xx, find the critical value x>0x > 0 that minimizes surface area, and confirm it is a minimum using the second derivative.

Answer

x=6 mx = 6\text{ m}. Steps: y=108x2  ⟹  S(x)=2x2+4xy=2x2+432xy = \frac{108}{x^2} \implies S(x) = 2x^2 + 4xy = 2x^2 + \frac{432}{x}. Differentiating gives S′(x)=4x−432x2=0  ⟹  4x3=432  ⟹  x3=108×44=108  ⟹  x=1083=343S'(x) = 4x - \frac{432}{x^2} = 0 \implies 4x^3 = 432 \implies x^3 = 108 \times \frac{4}{4} = 108 \implies x = \sqrt[3]{108} = 3\sqrt[3]{4} wait, 432/4=108432/4 = 108, so x=1083 mx = \sqrt[3]{108}\text{ m}. S′′(x)=4+864x3>0S''(x) = 4 + \frac{864}{x^3} > 0 for all x>0x > 0, confirming a minimum.

03

An insulated cylindrical pipe has lateral heat loss proportional to its curved area plus heat loss from its two ends proportional to twice their area: C(r)=4πr2+KrC(r) = 4\pi r^2 + \frac{K}{r} for a constant K>0K > 0 and r>0r > 0. Find the critical radius rr that minimizes C(r)C(r), stating the result in terms of KK.

Answer

r=K8π3r = \sqrt[3]{\frac{K}{8\pi}}. Steps: C′(r)=8πr−Kr2C'(r) = 8\pi r - \frac{K}{r^2}. Set C′(r)=0  ⟹  8πr=Kr2  ⟹  r3=K8π  ⟹  r=K8π3C'(r) = 0 \implies 8\pi r = \frac{K}{r^2} \implies r^3 = \frac{K}{8\pi} \implies r = \sqrt[3]{\frac{K}{8\pi}}.

Loading workspace…