Resources

Consider the nearly singular 2×22 \times 2 system AϵX=BA_{\epsilon} X = B where Aϵ=[1111+ϵ]A_{\epsilon} = \begin{bmatrix} 1 & 1 \\ 1 & 1 + \epsilon \end{bmatrix} and B=[22+ϵ]B = \begin{bmatrix} 2 \\ 2 + \epsilon \end{bmatrix} for a small perturbation parameter ϵ>0\epsilon > 0. Find the symbolic inverse matrix Aϵ−1A_{\epsilon}^{-1} in terms of ϵ\epsilon, solve for X=[x(ϵ)y(ϵ)]X = \begin{bmatrix} x(\epsilon) \\ y(\epsilon) \end{bmatrix}, and evaluate the asymptotic limit lim⁡ϵ→0+X\lim_{\epsilon \to 0^+} X.

Answer and steps

Final answer

Aϵ−1=1ϵ[1+ϵ−1−11]=[1+1ϵ−1ϵ−1ϵ1ϵ]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix} = \begin{bmatrix} 1 + \frac{1}{\epsilon} & -\frac{1}{\epsilon} \\ -\frac{1}{\epsilon} & \frac{1}{\epsilon} \end{bmatrix}, X=[11]X = \begin{bmatrix} 1 \\ 1 \end{bmatrix} for all ϵ>0\epsilon > 0, so lim⁡ϵ→0+X=[11]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

Steps

01

Compute the determinant of AϵA_{\epsilon}

For any 2×22 \times 2 matrix M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, the determinant is given by det⁡(M)=ad−bc\det(M) = ad - bc. Applying this to AϵA_{\epsilon}:

det⁡(Aϵ)=(1)(1+ϵ)−(1)(1)=1+ϵ−1=ϵ\det(A_{\epsilon}) = (1)(1 + \epsilon) - (1)(1) = 1 + \epsilon - 1 = \epsilon

Since ϵ>0\epsilon > 0, det⁡(Aϵ)≠0\det(A_{\epsilon}) \neq 0, which guarantees that AϵA_{\epsilon} is invertible.

02

Find the inverse matrix Aϵ−1A_{\epsilon}^{-1}

The standard inverse formula for a 2×22 \times 2 matrix is:

M−1=1det⁡(M)[d−b−ca]M^{-1} = \frac{1}{\det(M)} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}

Substituting the entries of AϵA_{\epsilon} and its determinant:

Aϵ−1=1ϵ[1+ϵ−1−11]=[1+1ϵ−1ϵ−1ϵ1ϵ]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix} = \begin{bmatrix} 1 + \frac{1}{\epsilon} & -\frac{1}{\epsilon} \\ -\frac{1}{\epsilon} & \frac{1}{\epsilon} \end{bmatrix}

Common Pitfall: As ϵ→0+\epsilon \to 0^+, the individual entries of Aϵ−1A_{\epsilon}^{-1} grow without bound (diverge to ±∞\pm \infty). However, this does not automatically mean the solution vector XX diverges; cancellations can occur when multiplying by BB.

03

Solve for the solution vector XX

To solve the system AϵX=BA_{\epsilon}X = B, multiply both sides by Aϵ−1A_{\epsilon}^{-1}:

X=Aϵ−1B=1ϵ[1+ϵ−1−11][22+ϵ]X = A_{\epsilon}^{-1} B = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix} \begin{bmatrix} 2 \\ 2 + \epsilon \end{bmatrix}

Carrying out the matrix multiplication:

  • First component (row 1): (1+ϵ)(2)+(−1)(2+ϵ)=2+2ϵ−2−ϵ=ϵ(1 + \epsilon)(2) + (-1)(2 + \epsilon) = 2 + 2\epsilon - 2 - \epsilon = \epsilon
  • Second component (row 2): (−1)(2)+(1)(2+ϵ)=−2+2+ϵ=ϵ(-1)(2) + (1)(2 + \epsilon) = -2 + 2 + \epsilon = \epsilon

Multiplying by the scalar prefactor 1ϵ\frac{1}{\epsilon}:

X=1ϵ[ϵϵ]=[11]X = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

The solution is exactly X=[11]X = \begin{bmatrix} 1 \\ 1 \end{bmatrix} for every ϵ>0\epsilon > 0.

04

Evaluate the asymptotic limit

Since XX is independent of ϵ\epsilon for all ϵ>0\epsilon > 0:

lim⁡ϵ→0+X=lim⁡ϵ→0+[11]=[11]\lim_{\epsilon \to 0^+} X = \lim_{\epsilon \to 0^+} \begin{bmatrix} 1 \\ 1 \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the 2x2 matrix inversion formula by forgetting to swap the diagonal elements or negate the off-diagonal elements.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    det⁡(Aϵ)=1(1+ϵ)−1=ϵ\det(A_{\epsilon}) = 1(1+\epsilon) - 1 = \epsilon

  2. Step 2

    adj(Aϵ)=[1−1−11+ϵ]  ⟹  Aϵ−1=1ϵ[1−1−11+ϵ]\text{adj}(A_{\epsilon}) = \begin{bmatrix} 1 & -1 \\ -1 & 1+\epsilon \end{bmatrix} \implies A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 & -1 \\ -1 & 1+\epsilon \end{bmatrix}

    Correct

    adj(Aϵ)=[1+ϵ−1−11]  ⟹  Aϵ−1=1ϵ[1+ϵ−1−11]\text{adj}(A_{\epsilon}) = \begin{bmatrix} 1+\epsilon & -1 \\ -1 & 1 \end{bmatrix} \implies A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1+\epsilon & -1 \\ -1 & 1 \end{bmatrix}

    For a matrix [abcd]\begin{bmatrix} a & b \\ c & d \end{bmatrix}, the adjugate swaps the diagonal entries: [d−b−ca]\begin{bmatrix} d & -b \\ -c & a \end{bmatrix}. You negated the off-diagonal entries correctly, but you left the diagonal entries 11 and 1+ϵ1+\epsilon in their original positions instead of swapping them.

  3. Step 3

    X=1ϵ[1−1−11+ϵ][22+ϵ]=1ϵ[2−(2+ϵ)−2+(1+ϵ)(2+ϵ)]=1ϵ[−ϵ3ϵ+ϵ2]=[−13+ϵ]X = \frac{1}{\epsilon} \begin{bmatrix} 1 & -1 \\ -1 & 1+\epsilon \end{bmatrix} \begin{bmatrix} 2 \\ 2+\epsilon \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} 2 - (2+\epsilon) \\ -2 + (1+\epsilon)(2+\epsilon) \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} -\epsilon \\ 3\epsilon + \epsilon^2 \end{bmatrix} = \begin{bmatrix} -1 \\ 3+\epsilon \end{bmatrix}

    Correct

    X=1ϵ[1+ϵ−1−11][22+ϵ]=1ϵ[2(1+ϵ)−(2+ϵ)−2+(2+ϵ)]=1ϵ[ϵϵ]=[11]X = \frac{1}{\epsilon} \begin{bmatrix} 1+\epsilon & -1 \\ -1 & 1 \end{bmatrix} \begin{bmatrix} 2 \\ 2+\epsilon \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} 2(1+\epsilon) - (2+\epsilon) \\ -2 + (2+\epsilon) \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

    Your matrix multiplication and algebraic simplification were carried out cleanly, but the result was affected by the incorrect inverse matrix from Step 2.

  4. Step 4

    lim⁡ϵ→0+X=[−13]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} -1 \\ 3 \end{bmatrix}

    Correct

    lim⁡ϵ→0+X=lim⁡ϵ→0+[11]=[11]\lim_{\epsilon \to 0^+} X = \lim_{\epsilon \to 0^+} \begin{bmatrix} 1 \\ 1 \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

    You evaluated the limit correctly for your vector, but this final result follows from the earlier matrix inversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You found the determinant det⁡(Aϵ)=ϵ\det(A_{\epsilon}) = \epsilon accurately.

You correctly remembered to negate the off-diagonal entries in the adjugate matrix.

You performed the vector-matrix multiplication and scalar division carefully.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inversion Formula: Swapping Diagonal Entries

You kept aa and dd in their original spots instead of interchanging them when constructing the adjugate matrix.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting a 2×22 \times 2 matrix requires two distinct transformations on the entries: swapping the main diagonal entries (a↔da \leftrightarrow d) and negating the off-diagonal entries (b→−b,c→−cb \to -b, c \to -c). Neglecting the diagonal swap while applying the sign change is a common slip when the matrix entries contain algebraic terms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Adjugate Formula for $2 \times 2$ Matrices
  • For M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, adj(M)=[d−b−ca]\text{adj}(M) = \begin{bmatrix} d & -b \\ -c & a \end{bmatrix}.

  • Always explicitly write out the two separate movements: swap aa and dd, then switch the signs of bb and cc.

Identity Check
  • MM−1=IM M^{-1} = I

  • Quickly check the (1,1)(1,1) entry of M⋅adj(M)M \cdot \text{adj}(M): a⋅d+b(−c)=ad−bc=det⁡(M)a \cdot d + b(-c) = ad - bc = \det(M). If you forget to swap aa and dd, the product will not equal det⁡(M)I\det(M) I.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Swap the diagonal entries 11 and 1+ϵ1+\epsilon and negate the off-diagonal entries: adj(Aϵ)=[1+ϵ−1−11]\text{adj}(A_{\epsilon}) = \begin{bmatrix} 1+\epsilon & -1 \\ -1 & 1 \end{bmatrix}.

  2. Multiply by 1det⁡(Aϵ)\frac{1}{\det(A_{\epsilon})}: Aϵ−1=1ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1+\epsilon & -1 \\ -1 & 1 \end{bmatrix}.

  3. Compute X=Aϵ−1B=1ϵ[(1+ϵ)(2)+(−1)(2+ϵ)(−1)(2)+(1)(2+ϵ)]=1ϵ[ϵϵ]=[11]X = A_{\epsilon}^{-1} B = \frac{1}{\epsilon} \begin{bmatrix} (1+\epsilon)(2) + (-1)(2+\epsilon) \\ (-1)(2) + (1)(2+\epsilon) \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}.

  4. Evaluate the limit: lim⁡ϵ→0+[11]=[11]\lim_{\epsilon \to 0^+} \begin{bmatrix} 1 \\ 1 \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}.

Final answer

Aϵ−1=1ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1+\epsilon & -1 \\ -1 & 1 \end{bmatrix}, X=[11]X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}, and lim⁡ϵ→0+X=[11]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the two distinct operations of 2×22 \times 2 inversion: swap the main diagonal, negate the opposite diagonal.

  • Perform a quick mental check by verifying that the top-left product ad−bca d - b c matches the determinant.

  • Try the practice exercises below to solidify constructing inverse matrices with symbolic parameters.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly distributes the scalar factor 1/ε into the numerator during matrix-vector multiplication, dropping ε from the second row.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    det⁡(Aϵ)=1+ϵ−1=ϵ  ⟹  Aϵ−1=1ϵ[1+ϵ−1−11]\det(A_{\epsilon}) = 1 + \epsilon - 1 = \epsilon \implies A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix}

  2. Step 2

    X=1ϵ[(1+ϵ)(2)−(2+ϵ)−2+2+ϵ]X = \frac{1}{\epsilon} \begin{bmatrix} (1 + \epsilon)(2) - (2 + \epsilon) \\ -2 + 2 + \epsilon \end{bmatrix}

  3. Step 3

    X=1ϵ[ϵ2ϵ]=[12]X = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ 2\epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}

    Correct

    X=1ϵ[ϵϵ]=[11]X = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

    In the second row, −2+2+ϵ-2 + 2 + \epsilon simplifies to ϵ\epsilon, not 2ϵ2\epsilon. Consequently, the second component of XX is ϵϵ=1\frac{\epsilon}{\epsilon} = 1 rather than 22.

  4. Step 4

    lim⁡ϵ→0+X=[12]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} 1 \\ 2 \end{bmatrix}

    Correct

    lim⁡ϵ→0+X=[11]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

    Your limit evaluation followed correctly from your previous vector, but it inherits the arithmetic error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You found the determinant and symbolic inverse Aϵ−1A_{\epsilon}^{-1} accurately.

You set up the matrix-vector multiplication X=Aϵ−1BX = A_{\epsilon}^{-1}B correctly.

You simplified the first row algebraic expression (1+ϵ)(2)−(2+ϵ)=ϵ(1+\epsilon)(2) - (2+\epsilon) = \epsilon without error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic Simplification Error

You simplified −2+2+ϵ-2 + 2 + \epsilon into 2ϵ2\epsilon instead of 0+ϵ=ϵ0 + \epsilon = \epsilon.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A quick combining-of-terms slip occurred when reducing the constant and variable terms in the second row, likely by conflating the canceled constant 2 with the coefficient of ϵ\epsilon.

REASONING PATH
Your ACEpath teacher’s suggested approach
Additive Inverse Cancellation
  • For real numbers, −c+c=0-c + c = 0, so −c+c+ϵ=0+ϵ=1ϵ-c + c + \epsilon = 0 + \epsilon = 1\epsilon.

  • Always cancel opposite constant terms to 00 completely before writing down remaining variable terms.

Quick Verification via Original System
  • If X=[1y]X = \begin{bmatrix} 1 \\ y \end{bmatrix}, then the first equation x+y=2x + y = 2 requires 1+y=2  ⟹  y=11 + y = 2 \implies y = 1.

  • Substitute your computed XX back into row 1 of AϵX=BA_{\epsilon} X = B to immediately catch component errors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Simplify the second row entry: −2+2+ϵ=0+ϵ=ϵ-2 + 2 + \epsilon = 0 + \epsilon = \epsilon.

  2. Write the simplified vector before scaling: [ϵϵ]\begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix}.

  3. Multiply by the scalar factor 1ϵ\frac{1}{\epsilon}: X=1ϵ[ϵϵ]=[11]X = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}.

  4. Take the asymptotic limit: lim⁡ϵ→0+[11]=[11]\lim_{\epsilon \to 0^+} \begin{bmatrix} 1 \\ 1 \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}.

Final answer

Aϵ−1=1ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix}, X=[11]X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}, lim⁡ϵ→0+X=[11]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a sanity check on solved vectors by plugging them back into the simplest row of the original system.

  • Practice combining signed constants and variable terms deliberately to prevent misattributing coefficients.

  • Work through perturbed matrix problems where rows cancel to ensure clean algebraic tracking.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the determinant as 1 + ε + 1 = 2 + ε by adding instead of subtracting the off-diagonal product.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    det⁡(Aϵ)=1(1+ϵ)+1(1)=2+ϵ\det(A_{\epsilon}) = 1(1 + \epsilon) + 1(1) = 2 + \epsilon

    Correct

    det⁡(Aϵ)=1(1+ϵ)−1(1)=ϵ\det(A_{\epsilon}) = 1(1 + \epsilon) - 1(1) = \epsilon

    You added the product of the off-diagonal entries instead of subtracting it. For a 2×22 \times 2 matrix, the determinant formula is det⁡(M)=ad−bc\det(M) = ad - bc.

  2. Step 2

    Aϵ−1=12+ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{2 + \epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix}

    Correct

    Aϵ−1=1ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix}

    You placed the correct adjugate matrix, but the scalar factor outside is affected by the incorrect determinant from Step 1.

  3. Step 3

    X=12+ϵ[1+ϵ−1−11][22+ϵ]  ⟹  X=12+ϵ[2+2ϵ−2−ϵ−2+2+ϵ]  ⟹  X=12+ϵ[ϵϵ]=[ϵ2+ϵϵ2+ϵ]X = \frac{1}{2 + \epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix} \begin{bmatrix} 2 \\ 2 + \epsilon \end{bmatrix} \implies X = \frac{1}{2 + \epsilon} \begin{bmatrix} 2 + 2\epsilon - 2 - \epsilon \\ -2 + 2 + \epsilon \end{bmatrix} \implies X = \frac{1}{2 + \epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} \frac{\epsilon}{2 + \epsilon} \\ \frac{\epsilon}{2 + \epsilon} \end{bmatrix}

    Correct

    X=1ϵ[ϵϵ]=[11]X = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

    You multiplied the adjugate matrix by BB completely correctly to get [ϵϵ]\begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix}, but multiplying by the incorrect prefactor 12+ϵ\frac{1}{2 + \epsilon} yielded an incorrect expression for XX.

  4. Step 4

    lim⁡ϵ→0+X=[02+002+0]=[00]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} \frac{0}{2 + 0} \\ \frac{0}{2 + 0} \end{bmatrix} = \begin{bmatrix} 0 \\ 0 \end{bmatrix}

    Correct

    lim⁡ϵ→0+X=lim⁡ϵ→0+[11]=[11]\lim_{\epsilon \to 0^+} X = \lim_{\epsilon \to 0^+} \begin{bmatrix} 1 \\ 1 \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

    You evaluated the limit of your expression correctly, but because the solution vector was affected by the determinant error, the resulting limit is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formed the adjugate matrix by swapping diagonal entries and negating off-diagonal entries.

You multiplied the 2×22 \times 2 matrix by the column vector accurately and simplified the algebraic expressions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Determinant Formula Sign Error

In Step 1, you wrote 1(1+ϵ)+1(1)1(1+\epsilon) + 1(1) with a plus sign instead of subtracting the off-diagonal product.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the sum ad+bcad + bc rather than the standard difference ad−bcad - bc when calculating the determinant of a 2×22 \times 2 matrix.

REASONING PATH
Your ACEpath teacher’s suggested approach
2x2 Determinant Rule
  • For matrix M=[abcd]M = \begin{bmatrix} a & b \\ c & d \end{bmatrix}, det⁡(M)=ad−bc\det(M) = ad - bc.

  • Always subtract the product of the antidiagonal entries (bcbc) from the main diagonal product (adad).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the determinant: det⁡(Aϵ)=(1)(1+ϵ)−(1)(1)=1+ϵ−1=ϵ\det(A_{\epsilon}) = (1)(1 + \epsilon) - (1)(1) = 1 + \epsilon - 1 = \epsilon.

  2. Write the inverse: Aϵ−1=1ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix}.

  3. Multiply by BB: X=1ϵ[1+ϵ−1−11][22+ϵ]=1ϵ[ϵϵ]=[11]X = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix} \begin{bmatrix} 2 \\ 2 + \epsilon \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} \epsilon \\ \epsilon \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}.

  4. Take the asymptotic limit: lim⁡ϵ→0+[11]=[11]\lim_{\epsilon \to 0^+} \begin{bmatrix} 1 \\ 1 \end{bmatrix} = \begin{bmatrix} 1 \\ 1 \end{bmatrix}.

Final answer

Aϵ−1=1ϵ[1+ϵ−1−11]A_{\epsilon}^{-1} = \frac{1}{\epsilon} \begin{bmatrix} 1 + \epsilon & -1 \\ -1 & 1 \end{bmatrix}, X=[11]X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}, lim⁡ϵ→0+X=[11]\lim_{\epsilon \to 0^+} X = \begin{bmatrix} 1 \\ 1 \end{bmatrix}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check the sign in the 2×22 \times 2 determinant formula before inverting matrices.

  • Notice whether a matrix is nearly singular: when rows become identical as ϵ→0\epsilon \to 0, the determinant must approach 00.

Lock it in

Similar question

01

Find the inverse of the matrix M=[3243]M = \begin{bmatrix} 3 & 2 \\ 4 & 3 \end{bmatrix} and use it to solve MX=[710]MX = \begin{bmatrix} 7 \\ 10 \end{bmatrix}.

Answer

M−1=[3−2−43]M^{-1} = \begin{bmatrix} 3 & -2 \\ -4 & 3 \end{bmatrix} and X=[12]X = \begin{bmatrix} 1 \\ 2 \end{bmatrix}. Key steps: det⁡(M)=3(3)−2(4)=1\det(M) = 3(3) - 2(4) = 1. Swap diagonal entries and negate off-diagonals to get M−1=[3−2−43]M^{-1} = \begin{bmatrix} 3 & -2 \\ -4 & 3 \end{bmatrix}. Then X=M−1[710]=[3(7)−2(10)−4(7)+3(10)]=[12]X = M^{-1} \begin{bmatrix} 7 \\ 10 \end{bmatrix} = \begin{bmatrix} 3(7) - 2(10) \\ -4(7) + 3(10) \end{bmatrix} = \begin{bmatrix} 1 \\ 2 \end{bmatrix}.

02

Given the parametric matrix Ak=[2k11]A_k = \begin{bmatrix} 2 & k \\ 1 & 1 \end{bmatrix} where k≠2k \neq 2, compute the symbolic inverse Ak−1A_k^{-1} and solve AkX=[k1]A_k X = \begin{bmatrix} k \\ 1 \end{bmatrix}.

Answer

Ak−1=12−k[1−k−12]A_k^{-1} = \frac{1}{2-k} \begin{bmatrix} 1 & -k \\ -1 & 2 \end{bmatrix} and X=[01]X = \begin{bmatrix} 0 \\ 1 \end{bmatrix}. Key steps: det⁡(Ak)=2(1)−k(1)=2−k\det(A_k) = 2(1) - k(1) = 2 - k. Swap a=2a=2 and d=1d=1 to place 11 at (1,1)(1,1) and 22 at (2,2)(2,2); negate off-diagonals. Multiplying by [k1]\begin{bmatrix} k \\ 1 \end{bmatrix} yields X=12−k[1(k)−k(1)−1(k)+2(1)]=12−k[02−k]=[01]X = \frac{1}{2-k} \begin{bmatrix} 1(k) - k(1) \\ -1(k) + 2(1) \end{bmatrix} = \frac{1}{2-k} \begin{bmatrix} 0 \\ 2-k \end{bmatrix} = \begin{bmatrix} 0 \\ 1 \end{bmatrix}.

03

Consider the nearly singular system [1212+ϵ][xy]=[33+2ϵ]\begin{bmatrix} 1 & 2 \\ 1 & 2 + \epsilon \end{bmatrix} \begin{bmatrix} x \\ y \end{bmatrix} = \begin{bmatrix} 3 \\ 3 + 2\epsilon \end{bmatrix} for ϵ>0\epsilon > 0. Find the exact solution vector X(ϵ)X(\epsilon) using matrix inversion and determine lim⁡ϵ→0+X(ϵ)\lim_{\epsilon \to 0^+} X(\epsilon).

Answer

X(ϵ)=[−12]X(\epsilon) = \begin{bmatrix} -1 \\ 2 \end{bmatrix} and lim⁡ϵ→0+X(ϵ)=[−12]\lim_{\epsilon \to 0^+} X(\epsilon) = \begin{bmatrix} -1 \\ 2 \end{bmatrix}. Key steps: det⁡=(1)(2+ϵ)−(2)(1)=ϵ\det = (1)(2+\epsilon) - (2)(1) = \epsilon. Swap diagonal elements to get adj=[2+ϵ−2−11]\text{adj} = \begin{bmatrix} 2+\epsilon & -2 \\ -1 & 1 \end{bmatrix}. Multiply: X=1ϵ[(2+ϵ)(3)−2(3+2ϵ)−1(3)+1(3+2ϵ)]=1ϵ[6+3ϵ−6−4ϵ−3+3+2ϵ]=1ϵ[−ϵ2ϵ]=[−12]X = \frac{1}{\epsilon} \begin{bmatrix} (2+\epsilon)(3) - 2(3+2\epsilon) \\ -1(3) + 1(3+2\epsilon) \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} 6 + 3\epsilon - 6 - 4\epsilon \\ -3 + 3 + 2\epsilon \end{bmatrix} = \frac{1}{\epsilon} \begin{bmatrix} -\epsilon \\ 2\epsilon \end{bmatrix} = \begin{bmatrix} -1 \\ 2 \end{bmatrix}.

Loading workspace…