Resources

A biochemical engineer models the degradation rate vv (in μmol/(L⋅min)\mu\text{mol/(L}\cdot\text{min)}) of a chemical contaminant in wastewater using the Michaelis-Menten kinetic equation v(S)=Vmax⁡SKm+Sv(S) = \frac{V_{\max} S}{K_m + S}, where SS is the substrate contaminant concentration in mmol/L\text{mmol/L}, the maximum enzymatic velocity is Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}, and the half-saturation constant is Km=4.0 mmol/LK_m = 4.0\text{ mmol/L}. (a) Calculate lim⁡S→∞v(S)\lim_{S \to \infty} v(S). (b) Explain the biochemical reality of this mathematical limit in an industrial wastewater treatment reactor when contaminant levels become extremely high.

Answer and steps

Final answer

(a) lim⁡S→∞v(S)=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}; (b) As the contaminant concentration SS approaches infinity, every catalytic active site across all enzyme molecules in the reactor becomes continuously saturated with substrate, causing the reaction order to transition from first-order to zero-order where degradation proceeds at a fixed maximum throughput that cannot be increased further by adding more contaminant.

Steps

Part (a): Evaluate the Mathematical Limit

  1. Substitute the given constants into the Michaelis-Menten rate function: v(S)=Vmax⁡SKm+S=80S4.0+Sv(S) = \frac{V_{\max} S}{K_m + S} = \frac{80 S}{4.0 + S}
  2. Compute the limit as substrate concentration S→∞S \to \infty: Divide the numerator and the denominator by the highest power of SS in the denominator (S1S^1): lim⁡S→∞v(S)=lim⁡S→∞80SS4.0S+SS=lim⁡S→∞804.0S+1\lim_{S \to \infty} v(S) = \lim_{S \to \infty} \frac{\frac{80 S}{S}}{\frac{4.0}{S} + \frac{S}{S}} = \lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1}
  3. Evaluate the resulting terms: Since lim⁡S→∞4.0S=0\lim_{S \to \infty} \frac{4.0}{S} = 0: lim⁡S→∞v(S)=800+1=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = \frac{80}{0 + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}

Part (b): Biochemical Interpretation in Wastewater Treatment

  1. Enzyme Saturation: The enzymes responsible for catalyzing the degradation reaction have a finite number of active catalytic sites available in the reactor.
  2. Transition in Reaction Kinetics:

    • At low substrate levels (S≪KmS \ll K_m): Many active sites are unoccupied. The reaction rate is approximately directly proportional to the substrate concentration (v≈Vmax⁡KmSv \approx \frac{V_{\max}}{K_m}S), displaying first-order kinetics.
    • At extremely high substrate levels (S≫KmS \gg K_m): The concentration of contaminant molecules far exceeds the available enzyme molecules. Virtually 100%100\% of catalytic sites are continuously occupied by substrate molecules at all times.
  3. Physical Capacity Limit (Zero-Order Kinetics): Once every enzyme molecule is operating at full capacity, the degradation velocity reaches its horizontal asymptote: Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)} The reaction transitions to zero-order kinetics with respect to the contaminant. In the context of an industrial treatment plant, introducing more contaminant will not speed up the breakdown process, as the enzyme processing capacity is fully saturated.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student improperly cancels the variable S in the numerator and denominator sum, leading to an incorrect limit of 20 μmol/(L·min).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(S)=80S4.0+Sv(S) = \frac{80 S}{4.0 + S}

  2. Step 2

    lim⁡S→∞80S4.0+S=804.0=20 μmol/(L⋅min)\lim_{S \to \infty} \frac{80 S}{4.0 + S} = \frac{80}{4.0} = 20\text{ }\mu\text{mol/(L}\cdot\text{min)}

    Correct

    lim⁡S→∞80S4.0+S=lim⁡S→∞804.0S+1=800+1=80 μmol/(L⋅min)\lim_{S \to \infty} \frac{80 S}{4.0 + S} = \lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1} = \frac{80}{0 + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}

    You canceled the variable SS from 80S80S and the addition term in the denominator as if 80S4.0+S=804.0\frac{80S}{4.0+S} = \frac{80}{4.0}. Because SS is part of a sum in the denominator, you must divide both numerator and denominator by the highest power of SS (which is S1S^1), giving 804.0S+1→80\frac{80}{\frac{4.0}{S} + 1} \to 80 as S→∞S \to \infty.

  3. Step 3

    When contaminant levels become extremely high, all enzyme active sites become saturated. ⟹\Longrightarrow Because the enzymes are fully saturated, the degradation rate levels off at a constant maximum rate of 20 μmol/(L⋅min)20\text{ }\mu\text{mol/(L}\cdot\text{min)}.

    Correct

    As the contaminant concentration S→∞S \to \infty, all catalytic enzyme active sites become fully occupied (saturated), causing the reaction rate to level off at its theoretical maximum velocity Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)} (zero-order kinetics).

    Your qualitative reasoning about enzyme active sites becoming saturated and reaching a constant maximum rate is completely correct. However, your stated numerical maximum rate of 20 μmol/(L⋅min)20\text{ }\mu\text{mol/(L}\cdot\text{min)} was carried over from your calculation error in part (a) instead of the true limit 80 μmol/(L⋅min)80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the kinetic constants into the Michaelis-Menten model.

You correctly explained that high substrate levels cause enzyme active sites to saturate.

You recognized that saturation causes the reaction rate to plateau at a constant maximum velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Illegal rational cancellation across addition in limit evaluation

You dropped the additive structure of the denominator, effectively canceling SS from 80S80S and SS while leaving 4.04.0 alone.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing rational simplification across a sum with factor cancellation, along with misapplying the horizontal asymptote technique for rational functions lim⁡x→∞axb+x\lim_{x \to \infty} \frac{a x}{b + x}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Common Factors Before Canceling
  • Terms inside an addition cannot be canceled individually: axb+x≠ab\frac{a x}{b + x} \neq \frac{a}{b}. A term can only be canceled if it factors out of the entire denominator: axx(b/x+1)\frac{a x}{x(b/x + 1)}.

  • Always factor the dominant power out of the entire expression or divide every term in both numerator and denominator by that power.

Evaluate Limits at Infinity for Rational Functions
  • For degrees equal to 1 in both numerator and denominator, lim⁡S→∞aSb+S=lim⁡S→∞abS+1=a0+1=a\lim_{S \to \infty} \frac{a S}{b + S} = \lim_{S \to \infty} \frac{a}{\frac{b}{S} + 1} = \frac{a}{0 + 1} = a.

  • Notice that as S→∞S \to \infty, the constant KmK_m becomes negligible compared to SS, so Vmax⁡SKm+S≈Vmax⁡SS=Vmax⁡\frac{V_{\max} S}{K_m + S} \approx \frac{V_{\max} S}{S} = V_{\max}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both the numerator and the denominator by SS: lim⁡S→∞80S4.0+S=lim⁡S→∞804.0S+1\lim_{S \to \infty} \frac{80 S}{4.0 + S} = \lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1}.

  2. Apply the limit property lim⁡S→∞4.0S=0\lim_{S \to \infty} \frac{4.0}{S} = 0: 800+1=80 μmol/(L⋅min)\frac{80}{0 + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

  3. Relate the result back to the context: The maximum achievable degradation velocity is Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

Final answer

(a) lim⁡S→∞v(S)=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}; (b) At extremely high contaminant concentrations, all catalytic sites on the enzymes are completely saturated with substrate, causing the degradation rate to reach a horizontal asymptote at its theoretical maximum velocity Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice finding horizontal asymptotes and limits at infinity by dividing every term by the highest power of the independent variable.

  • Remember that in the Michaelis-Menten model, the parameter Vmax⁡V_{\max} directly represents the horizontal asymptote of the velocity curve.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets infinite concentration as causing the degradation rate itself to grow without bound, concluding that the limit is infinity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    lim⁡S→∞v(S)=lim⁡S→∞80S4.0+S\lim_{S \to \infty} v(S) = \lim_{S \to \infty} \frac{80 S}{4.0 + S}

  2. Step 2

    As \text{As } S →\to \infty$$\text{, the numerator } 80 S →\to ∞\infty   ⟹  \implies $\lim_{S →\to ∞\infty}$ v(S) = \infty$$

    Correct

    lim⁡S→∞80S4.0+S=lim⁡S→∞804.0S+1=800+1=80 μmol/(L⋅min)\lim_{S \to \infty} \frac{80 S}{4.0 + S} = \lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1} = \frac{80}{0 + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}

    Because the denominator 4.0+S4.0 + S also approaches ∞\infty, the expression has the indeterminate form ∞∞\frac{\infty}{\infty}. Dividing numerator and denominator by SS reveals that the ratio of leading coefficients is 801=80\frac{80}{1} = 80, not ∞\infty.

  3. Step 3

    At extremely high contaminant concentrations, there is an unlimited amount of substrate available for the reaction. As a result, the wastewater degradation rate keeps increasing without bound and never reaches a maximum limit.\text{At extremely high contaminant concentrations, there is an unlimited amount of substrate available for the reaction. As a result, the wastewater degradation rate keeps increasing without bound and never reaches a maximum limit.}

    Correct

    At extremely high contaminant concentrations (\text{At extremely high contaminant concentrations (}S \gg K_m), every enzyme catalytic active site in the reactor is continuously occupied by substrate. The degradation rate reaches its maximum processing capacity \text{), every enzyme catalytic active site in the reactor is continuously occupied by substrate. The degradation rate reaches its maximum processing capacity } V_{\max} = 80\text{ }$$\mu$$\text{mol/(L}$$\cdot$$\text{min)}$$\text{ and transitions to zero-order kinetics, meaning additional contaminant cannot increase the rate.}_$$

    Biochemical enzymes have a finite number of active sites. When substrate concentration becomes extremely high, all sites are saturated, creating a throughput ceiling rather than infinite growth.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the kinetic constants into the Michaelis-Menten model.

You recognized that substrate concentration SS grows without bound in the limit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Evaluating rational limits at infinity by inspecting only the numerator

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the expression as if only the numerator increases with SS, overlooking that the denominator also grows with SS at the same linear rate, which leads to the indeterminate form ∞∞\frac{\infty}{\infty} and a finite horizontal asymptote corresponding physically to enzyme saturation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate indeterminate rational limits
  • For a rational function P(S)Q(S)\frac{P(S)}{Q(S)} where both P(S)→∞P(S) \to \infty and Q(S)→∞Q(S) \to \infty with equal degree, divide every term by the highest power of SS to find the finite horizontal asymptote anbn\frac{a_n}{b_n}.

  • Divide numerator and denominator by SS: lim⁡S→∞804/S+1=800+1=80\lim_{S \to \infty} \frac{80}{4/S + 1} = \frac{80}{0 + 1} = 80.

Interpret asymptotic saturation physically
  • A finite horizontal asymptote in enzymatic models signifies that catalyst active sites are 100% occupied (enzyme saturation), establishing a zero-order upper limit on throughput.

  • State that the degradation rate plateaus at Vmax⁡V_{\max} because available enzyme active sites become the limiting factor, not the substrate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide numerator and denominator by SS: lim⁡S→∞804.0S+1\lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1}

  2. Apply the limit property lim⁡S→∞4.0S=0\lim_{S \to \infty} \frac{4.0}{S} = 0: 800+1=80 μmol/(L⋅min)\frac{80}{0 + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}

  3. Explain that because enzyme active sites are finite in number, they become fully saturated at high SS, causing the rate to plateau at Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)} (zero-order kinetics).

Final answer

(a) lim⁡S→∞v(S)=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}; (b) As contaminant levels become extremely high, all enzyme catalytic sites become fully saturated, capping the degradation rate at a constant maximum throughput of 80 μmol/(L⋅min)80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing limits at infinity for rational functions by dividing numerator and denominator by the highest degree term of the variable.

  • Connect mathematical horizontal asymptotes to physical carrying capacities or saturation phenomena in biological and chemical systems.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the saturation limit as S approaches infinity with the half-saturation point where S = Km, yielding a rate of 40 μmol/(L·min).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    At high concentration, substitute S=Km=4.0 into v(S)  ⟹  v(4.0)=80×4.04.0+4.0=3208.0=40 μmol/(L⋅min)  ⟹  lim⁡S→∞v(S)=40 μmol/(L⋅min)\text{At high concentration, substitute } S = K_m = 4.0 \text{ into } v(S) \implies v(4.0) = \frac{80 \times 4.0}{4.0 + 4.0} = \frac{320}{8.0} = 40\text{ }\mu\text{mol/(L}\cdot\text{min)} \implies \lim_{S \to \infty} v(S) = 40\text{ }\mu\text{mol/(L}\cdot\text{min)}

    Correct

    lim⁡S→∞v(S)=lim⁡S→∞80S4.0+S=lim⁡S→∞804.0S+1=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = \lim_{S \to \infty} \frac{80S}{4.0 + S} = \lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}

    You evaluated v(S)v(S) at S=KmS = K_m instead of taking the mathematical limit as S→∞S \to \infty. Dividing the numerator and denominator by SS shows that 4.0S→0\frac{4.0}{S} \to 0, giving a limit of 80 μmol/(L⋅min)80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

  2. Step 2

    When contaminant levels are high, the reactor operates at the half-saturation constant Km. At this point, half of the enzyme active sites are occupied, so the maximum attainable degradation rate in reality is 40 μmol/(L⋅min).\text{When contaminant levels are high, the reactor operates at the half-saturation constant } K_m\text{. At this point, half of the enzyme active sites are occupied, so the maximum attainable degradation rate in reality is } 40\text{ }\mu\text{mol/(L}\cdot\text{min)}\text{.}

    Correct

    As S→∞, contaminant concentration far exceeds available enzyme active sites, causing virtually 100% of sites to be continuously occupied. The degradation rate reaches its physical capacity at Vmax⁡=80 μmol/(L⋅min), exhibiting zero-order kinetics.\text{As } S \to \infty\text{, contaminant concentration far exceeds available enzyme active sites, causing virtually 100\% of sites to be continuously occupied. The degradation rate reaches its physical capacity at } V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}\text{, exhibiting zero-order kinetics.}

    You interpreted high contaminant levels as operating at S=KmS = K_m. However, KmK_m is the concentration that produces half of the maximum velocity; when contaminant levels are extremely high (S≫KmS \gg K_m), all active sites become saturated and the degradation rate reaches Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the numerical value of v(4.0)=40 μmol/(L⋅min)v(4.0) = 40\text{ }\mu\text{mol/(L}\cdot\text{min)}.

You correctly remembered that KmK_m corresponds to the point where half of the enzyme active sites are occupied.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Half-Saturation Constant with Asymptotic Limit

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the parameter KmK_m (the concentration at which v=12Vmax⁡v = \frac{1}{2}V_{\max}) with the limiting behavior as S→∞S \to \infty, leading you to treat the half-capacity rate as the absolute maximum degradation capacity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mathematical Limit vs. Reference Concentration
  • To evaluate lim⁡S→∞Vmax⁡SKm+S\lim_{S \to \infty} \frac{V_{\max}S}{K_m + S}, analyze the dominant terms as SS grows without bound rather than plugging in a finite parameter like S=KmS = K_m.

  • Divide the numerator and denominator by SS: as S→∞S \to \infty, KmS→0\frac{K_m}{S} \to 0, leaving Vmax⁡V_{\max}.

Biochemical Meaning of $K_m$ vs. $V_{\max}$
  • KmK_m is the substrate concentration where 50%50\% of active sites are filled (v=0.5Vmax⁡v = 0.5 V_{\max}). As S≫KmS \gg K_m, 100%100\% of active sites are saturated (v→Vmax⁡v \to V_{\max}).

  • Associate high contaminant overload (S→∞S \to \infty) with complete enzyme saturation and zero-order kinetics at Vmax⁡V_{\max}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. lim⁡S→∞v(S)=lim⁡S→∞80S4.0+S=lim⁡S→∞804.0S+1=800+1=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = \lim_{S \to \infty} \frac{80S}{4.0 + S} = \lim_{S \to \infty} \frac{80}{\frac{4.0}{S} + 1} = \frac{80}{0 + 1} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}

  2. At extremely high contaminant concentrations (S≫Km), every enzyme active site is fully and continuously saturated with substrate.\text{At extremely high contaminant concentrations (}S \gg K_m\text{), every enzyme active site is fully and continuously saturated with substrate.}

  3. Because all catalytic sites are occupied, adding more contaminant cannot increase the rate further, fixing degradation at Vmax⁡=80 μmol/(L⋅min) (zero-order kinetics).\text{Because all catalytic sites are occupied, adding more contaminant cannot increase the rate further, fixing degradation at } V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}\text{ (zero-order kinetics).}

Final answer

(a) lim⁡S→∞v(S)=80 μmol/(L⋅min)\lim_{S \to \infty} v(S) = 80\text{ }\mu\text{mol/(L}\cdot\text{min)}; (b) At extremely high contaminant levels (S≫KmS \gg K_m), enzyme catalytic sites become completely saturated with substrate, causing the reaction to reach its maximum throughput Vmax⁡=80 μmol/(L⋅min)V_{\max} = 80\text{ }\mu\text{mol/(L}\cdot\text{min)} with zero-order kinetics.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking rational limits as a variable approaches infinity by dividing through by the highest power in the denominator.

  • Review Michaelis-Menten kinetics to clearly distinguish between the half-saturation point (S=Km,v=12Vmax⁡S = K_m, v = \frac{1}{2}V_{\max}) and the saturation plateau (S≫Km,v≈Vmax⁡S \gg K_m, v \approx V_{\max}).

Lock it in

Similar question

01

A bio-filter removes ammonia according to the saturation model R(C)=120C5+CR(C) = \frac{120 C}{5 + C} where CC is ammonia concentration in mg/L\text{mg/L} and RR is in mg/(h⋅L)\text{mg/(h}\cdot\text{L)}. Calculate lim⁡C→∞R(C)\lim_{C \to \infty} R(C) and interpret its meaning.

Answer

lim⁡C→∞R(C)=120 mg/(h⋅L)\lim_{C \to \infty} R(C) = 120\text{ mg/(h}\cdot\text{L)}. Dividing by CC yields lim⁡C→∞1205C+1=1201=120\lim_{C \to \infty} \frac{120}{\frac{5}{C} + 1} = \frac{120}{1} = 120. In practice, this represents the bio-filter's maximum possible ammonia removal capacity once the biofilm is fully saturated.

02

An enzyme-catalyzed bioreactor operates under the rate law v(S)=45S10+2Sv(S) = \frac{45 S}{10 + 2 S}. (a) Determine lim⁡S→∞v(S)\lim_{S \to \infty} v(S). (b) What fraction of this limiting velocity is achieved when S=10S = 10?

Answer

(a) lim⁡S→∞v(S)=lim⁡S→∞4510S+2=452=22.5 units\lim_{S \to \infty} v(S) = \lim_{S \to \infty} \frac{45}{\frac{10}{S} + 2} = \frac{45}{2} = 22.5\text{ units}. (b) At S=10S = 10, v(10)=45(10)10+2(10)=45030=15 unitsv(10) = \frac{45(10)}{10 + 2(10)} = \frac{450}{30} = 15\text{ units}. The fraction is 1522.5=23\frac{15}{22.5} = \frac{2}{3} (or approximately 66.7%66.7\%).

03

An environmental engineer compares two wastewater contaminants with rate models v1(S)=60S3+Sv_1(S) = \frac{60 S}{3 + S} and v2(S)=90S22+5S2v_2(S) = \frac{90 S^2}{2 + 5 S^2}. Compute lim⁡S→∞v1(S)\lim_{S \to \infty} v_1(S) and lim⁡S→∞v2(S)\lim_{S \to \infty} v_2(S), and identify which contaminant has a higher degradation rate at extreme overload.

Answer

For v1(S)v_1(S), lim⁡S→∞603/S+1=60\lim_{S \to \infty} \frac{60}{3/S + 1} = 60. For v2(S)v_2(S), divide by S2S^2: lim⁡S→∞902/S2+5=905=18\lim_{S \to \infty} \frac{90}{2/S^2 + 5} = \frac{90}{5} = 18. Contaminant 1 has a significantly higher maximum throughput at extreme overload (6060 vs 1818).

Loading workspace…