Resources

A network infrastructure provider claims that a newly compiled routing kernel reduces average packet transit latency below the legacy baseline of 18.5 ms18.5\text{ ms}. However, the network architect notes that cache thrashing in the new kernel could potentially degrade routing performance and increase latency, meaning any shift away from 18.5 ms18.5\text{ ms} must be detected. (a) Explain the conceptual pitfall of automatically adopting a one-tailed alternative hypothesis based solely on the vendor's marketing claim. (b) State the proper null and alternative hypotheses from the network architect's quality-assurance perspective, defining the parameter μ\mu. (c) Explain what happens to the Type I error rate if an analyst converts a planned two-tailed test into a one-tailed test after observing that the sample mean is smaller than 18.5 ms18.5\text{ ms}.

Answer and steps

Final answer

(a) Adopting a one-tailed test solely because of an optimistic marketing claim introduces directional bias and completely blinds the test to harmful performance degradations (latencies >18.5 ms> 18.5\text{ ms}), treating extreme latency increases as mere lack of evidence rather than actionable failures. (b) Let μ\mu be the true mean packet transit latency (in milliseconds) under the new kernel. Hypotheses: H0:μ=18.5 msH_0: \mu = 18.5\text{ ms} versus Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}. (c) Switching from a two-tailed test to a one-tailed test after inspecting sample data ('data snooping') inflates the actual probability of a Type I error, effectively doubling the nominal significance level α\alpha (e.g., from 0.050.05 to 0.100.10).

Steps

Part (a): Pitfall of Relying on a One-Tailed Hypothesis

A one-tailed test restricts the rejection region entirely to one side of the distribution. If an analyst tests: Ha:μ<18.5 msH_a: \mu < 18.5\text{ ms} any observed sample mean significantly greater than 18.5 ms18.5\text{ ms} falls into the non-rejection region.

  • The Pitfall: Selecting a one-tailed test purely to match a vendor's optimistic claim introduces confirmation bias and blinds the quality-assurance process. If the new routing kernel suffers from cache thrashing or other regressions that significantly increase latency (e.g., to 25 ms25\text{ ms}), the one-tailed test would conclude "fail to reject H0H_0." It treats severe performance degradation the same as meeting the baseline, failing to detect an operational failure that requires immediate intervention.

Part (b): Stating the Null and Alternative Hypotheses

From the network architect's quality-assurance perspective, the goal is to detect any significant deviation—whether an improvement or a degradation—from the legacy baseline.

  1. Define the parameter: Let μ\mu represent the true population mean packet transit latency (in milliseconds) of the new routing kernel under operational conditions.
  2. Null Hypothesis (H0H_0): The null hypothesis represents the status quo or baseline condition: H0:μ=18.5 msH_0: \mu = 18.5\text{ ms}
  3. Alternative Hypothesis (HaH_a): Because changes in either direction are critical to detect, a two-sided (two-tailed) alternative is required: Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}

Part (c): Impact on the Type I Error Rate

A Type I error occurs when a true null hypothesis is incorrectly rejected (α=P(Reject H0∣H0 is true)\alpha = P(\text{Reject } H_0 \mid H_0 \text{ is true})).

  • Nominal vs. Actual Error Rate: In a planned two-tailed test at significance level α\alpha (e.g., α=0.05\alpha = 0.05), the rejection area is split equally: α/2=0.025\alpha/2 = 0.025 in the lower tail and α/2=0.025\alpha/2 = 0.025 in the upper tail.
  • The Effect of Post-Hoc Direction Selection (Data Snooping): If an analyst looks at the sample data first, sees that xˉ<18.5 ms\bar{x} < 18.5\text{ ms}, and retroactively chooses a one-tailed lower test using the full critical threshold for α=0.05\alpha = 0.05 (e.g., critical value z=−1.645z = -1.645 instead of z=−1.96z = -1.96), they are adopting a decision rule that would have also used the upper tail if the data had shown xˉ>18.5 ms\bar{x} > 18.5\text{ ms}.
  • Consequence: By choosing the direction of the one-tailed test based on the observed data, the effective probability of falsely rejecting H0H_0 across both potential extremes doubles the nominal rate: αactual=2⋅αnominal\alpha_{\text{actual}} = 2 \cdot \alpha_{\text{nominal}} For instance, a nominal 5%5\% test becomes an actual 10%10\% test, invalidating the statistical integrity of the inference.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student formulates a one-tailed test because they adopt the vendor's directional claim rather than the quality-assurance requirement to detect latency increases.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A one-tailed test is biased because vendor claims may be exaggerated or untested in real production environments.

    Correct

    Adopting a one-tailed test puts all rejection probability into one tail (Ha:μ<18.5 msH_a: \mu < 18.5\text{ ms}), making the test statistically blind to increases in latency (>18.5 ms> 18.5\text{ ms}). If the kernel suffers from performance degradation, the test cannot reject H0H_0.

    Your explanation gives a practical critique of vendor claims, but it misses the statistical pitfall. A one-tailed test concentrates the entire rejection region in the lower tail, meaning any severe latency increase (performance regression) will fall into the non-rejection region and be missed entirely.

  2. Step 2

    Let μ\mu be the true mean packet transit latency of the new kernel. H0:μ=18.5 ms  ⟹  Ha:μ<18.5 msH_0: \mu = 18.5\text{ ms} \implies H_a: \mu < 18.5\text{ ms}

    Correct

    Let μ\mu be the true mean packet transit latency (in ms) under the new kernel. H0:μ=18.5 msH_0: \mu = 18.5\text{ ms} vs. Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}

    You correctly defined μ\mu and formulated H0H_0, but you wrote a one-tailed alternative Ha:μ<18.5 msH_a: \mu < 18.5\text{ ms}. Because the network architect must catch both improvements and degradations (such as cache thrashing), the quality-assurance objective requires a two-tailed alternative: Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}.

  3. Step 3

    Selecting the tail after looking at the sample mean inflates the false positive rate, making the actual Type I error rate 2α2\alpha instead of α\alpha.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly defined the population parameter μ\mu in the context of the routing latency problem.

You correctly stated the null hypothesis as H0:μ=18.5 msH_0: \mu = 18.5\text{ ms}.

You accurately explained that post-hoc tail selection doubles the actual Type I error rate to 2α2\alpha.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
One-Tailed vs. Two-Tailed Hypothesis Selection

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You aligned the alternative hypothesis with the vendor's optimistic claim of reduced latency instead of aligning it with the quality-assurance goal of detecting performance shifts in either direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the Testing Objective
  • The alternative hypothesis HaH_a must reflect the investigative or operational requirement, not just a marketing claim.

  • Ask whether deviations in the opposite direction carry operational risk. If both increases and decreases matter, always formulate a two-tailed test: Ha:μ≠μ0H_a: \mu \ne \mu_0.

Identify Directional Blindness
  • A one-tailed test cannot reject H0H_0 in the opposite direction, regardless of how extreme the sample data is.

  • Check whether an outcome in the unmonitored tail would be dangerous. If cache thrashing increases latency, a lower-tail test treats that failure as 'no significant difference'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the network architect must guard against cache thrashing that increases latency, so deviations in either direction are critical.

  2. Define the parameter: Let μ\mu be the true mean packet transit latency (in ms) under the new routing kernel.

  3. State the null hypothesis: H0:μ=18.5 msH_0: \mu = 18.5\text{ ms}.

  4. State the two-tailed alternative hypothesis to detect any shift: Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}.

Final answer

(a) A one-tailed test cannot reject H0H_0 if latency increases, blinding the team to regressions. (b) Let μ\mu be the true mean latency (ms). H0:μ=18.5 msH_0: \mu = 18.5\text{ ms} vs. Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}. (c) Post-hoc tail selection doubles the actual Type I error rate from α\alpha to 2α2\alpha.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how quality assurance testing differs from one-sided research claims.

  • Practice identifying whether a scenario demands a one-sided or two-sided test based on the consequences of deviations in both directions.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly believes that switching from a two-tailed test to a one-tailed test halves the Type I error rate by concentrating α into a single tail.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A one-tailed test cannot detect severe latency increases caused by cache thrashing, creating an operational risk.

  2. Step 2

    Let μ\mu be the true mean transit latency of the new kernel. ⟹ H0:μ=18.5 msH_0: \mu = 18.5\text{ ms} ⟹ Ha:μ≠18.5 msH_a: \mu \ne 18.5\text{ ms}

  3. Step 3

    The Type I error rate is halved from α\alpha to α/2\alpha/2 because the rejection area is placed on only one side.

    Correct

    The actual Type I error rate inflates to approximately 2α2\alpha (doubling the nominal significance level) due to post-hoc data snooping.

    Selecting a one-tailed test after inspecting sample data ('data snooping') inflates the actual Type I error rate to approximately 2α2\alpha. Because the analyst would have placed the critical region in the upper tail had xˉ>18.5 ms\bar{x} > 18.5\text{ ms}, the true probability of falsely rejecting H0H_0 across both directions combines to 2α2\alpha.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained the operational risk of blinding the test to performance degradation.

You correctly defined the population parameter μ\mu and formulated two-sided hypotheses.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Post-Hoc Hypothesis Selection Error
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the area in a single tail of a planned two-tailed test with the effective false-positive rate of choosing a one-tailed test after inspecting the sample data, missing that post-hoc direction choice gives two chances to reject H0H_0 and thus inflates the true Type I error rate to approximately 2α2\alpha.

REASONING PATH
Your ACEpath teacher’s suggested approach
Post-Hoc Direction Selection (Data Snooping)
  • Hypothesis directionality must be fixed before examining the sample data. Choosing the tail after inspecting xˉ\bar{x} doubles the overall false rejection rate: αactual≈2αnominal\alpha_{\text{actual}} \approx 2\alpha_{\text{nominal}}.

  • Always evaluate whether the decision rule would have reacted symmetrically in the other direction had the sample shown the opposite extreme.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that a Type I error is the probability of rejecting H0H_0 when H0H_0 is true: α=P(Reject H0∣H0 true)\alpha = P(\text{Reject } H_0 \mid H_0 \text{ true}).

  2. Note that if an analyst inspects xˉ\bar{x} first and picks the lower tail when xˉ<μ0\bar{x} < \mu_0, they would symmetrically pick the upper tail when xˉ>μ0\bar{x} > \mu_0.

  3. Because each tail uses a critical cutoff with area α\alpha, the combined probability of falsely rejecting in either tail is α+α=2α\alpha + \alpha = 2\alpha.

  4. Conclude that post-hoc direction selection inflates the nominal significance level α\alpha to an actual error rate of 2α2\alpha.

Final answer

The Type I error rate is doubled (inflated from α\alpha to approximately 2α2\alpha) because choosing the tail after observing the data allows rejections in either extreme under a nominal one-tailed threshold.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the statistical consequences of data snooping and HARKing (Hypothesizing After Results are Known).

  • Practice calculating the actual versus nominal significance level when hypotheses or cutoffs are altered post-hoc.

Lock it in

Similar question

01

A database administrator tests an index redesign. The vendor claims query response times will drop below the baseline of 42 ms42\text{ ms}. However, index maintenance overhead could also increase response times. State the parameter definition, null hypothesis, and alternative hypothesis from the administrator's perspective.

Answer

Let μ\mu be the true mean query response time (in ms) using the redesign. H0:μ=42 msH_0: \mu = 42\text{ ms} versus Ha:μ≠42 msH_a: \mu \ne 42\text{ ms}. A two-tailed test is required because performance degradation is also a critical operational risk.

02

A manufacturing plant sets a strict thickness target of 5.00 mm5.00\text{ mm} for steel plates. An engineer tests a new rolling mill. Explain the statistical consequence if the engineer mistakenly conducts a one-tailed test (Ha:μ>5.00 mmH_a: \mu > 5.00\text{ mm}) and the mill actually produces plates with a mean of 4.60 mm4.60\text{ mm}.

Answer

With Ha:μ>5.00 mmH_a: \mu > 5.00\text{ mm}, the entire rejection region lies in the upper tail. A sample mean of 4.60 mm4.60\text{ mm} yields a test statistic deep in the lower tail, leading to a decision to 'fail to reject H0H_0'. The test fails to detect that the plates are critically out of spec (too thin).

03

An investigator plans to test H0:μ=100H_0: \mu = 100 at α=0.05\alpha = 0.05. After gathering data, they observe xˉ=96\bar{x} = 96 and immediately report a one-tailed pp-value of 0.0350.035, rejecting H0H_0. Explain why this inference is invalid and calculate what the valid two-tailed pp-value would be.

Answer

The inference is invalid due to post-hoc data snooping: selecting the test direction after observing the sample mean artificially halves the pp-value and doubles the Type I error rate. For a symmetric distribution, the valid two-tailed pp-value is 2×0.035=0.0702 \times 0.035 = 0.070, which fails to reject H0H_0 at α=0.05\alpha = 0.05.

Loading workspace…