Resources

In a college analytical chemistry laboratory, students standardize a nominal 0.1000 M NaOH0.1000\text{ M}\text{ NaOH} titrant against primary-standard potassium hydrogen phthalate (KHP). A student titrates five replicate aliquots, recording the resulting concentrations: 0.1024 M0.1024\text{ M}, 0.1018 M0.1018\text{ M}, 0.1026 M0.1026\text{ M}, 0.1020 M0.1020\text{ M}, and 0.1022 M0.1022\text{ M}. (a) Calculate the sample mean concentration xˉ\bar{x} and the sample standard deviation ss to four significant figures. (b) Compute the degrees of freedom dfdf and the test statistic tt for testing H0:μ=0.1000 MH_0: \mu = 0.1000\text{ M} versus Ha:μ≠0.1000 MH_a: \mu \neq 0.1000\text{ M}. (c) Using standard Student's tt-distribution critical values for the computed dfdf (t0.005=4.604t_{0.005} = 4.604, t0.0005=8.610t_{0.0005} = 8.610), bound the two-tailed PP-value and state the experimental conclusion at α=0.01\alpha = 0.01.

Answer and steps

Final answer

(a) xˉ=0.1022 M\bar{x} = 0.1022\text{ M}, s=0.0003162 Ms = 0.0003162\text{ M}; (b) df=4df = 4, t=0.1022−0.10000.0003162/5=0.00220.0001414=15.56t = \frac{0.1022 - 0.1000}{0.0003162 / \sqrt{5}} = \frac{0.0022}{0.0001414} = 15.56; (c) Since t=15.56>8.610t = 15.56 > 8.610, the two-tailed PP-value satisfies P<0.001P < 0.001 (specifically P≈0.0001P \approx 0.0001). Reject H0H_0 at α=0.01\alpha = 0.01; there is strong evidence that the true mean concentration of the standardized NaOH\text{NaOH} solution differs from 0.1000 M0.1000\text{ M}.

Steps

Part (a): Sample Mean and Sample Standard Deviation

  1. Calculate the sample mean (xˉ\bar{x}): The sample size is n=5n = 5. Sum the five replicate titration values: ∑i=15xi=0.1024+0.1018+0.1026+0.1020+0.1022=0.5110 M\sum_{i=1}^{5} x_i = 0.1024 + 0.1018 + 0.1026 + 0.1020 + 0.1022 = 0.5110\text{ M} The sample mean is: xˉ=∑xin=0.51105=0.1022 M\bar{x} = \frac{\sum x_i}{n} = \frac{0.5110}{5} = 0.1022\text{ M}
  2. Calculate the sample standard deviation (ss): Compute the deviation of each observation from xˉ\bar{x} and square it: (0.1024−0.1022)2=(0.0002)2=4×10−8(0.1024 - 0.1022)^2 = (0.0002)^2 = 4 \times 10^{-8} (0.1018−0.1022)2=(−0.0004)2=16×10−8(0.1018 - 0.1022)^2 = (-0.0004)^2 = 16 \times 10^{-8} (0.1026−0.1022)2=(0.0004)2=16×10−8(0.1026 - 0.1022)^2 = (0.0004)^2 = 16 \times 10^{-8} (0.1020−0.1022)2=(−0.0002)2=4×10−8(0.1020 - 0.1022)^2 = (-0.0002)^2 = 4 \times 10^{-8} (0.1022−0.1022)2=(0.0000)2=0(0.1022 - 0.1022)^2 = (0.0000)^2 = 0

    Sum the squared deviations: ∑(xi−xˉ)2=(4+16+16+4+0)×10−8=40×10−8=4.0×10−7\sum (x_i - \bar{x})^2 = (4 + 16 + 16 + 4 + 0) \times 10^{-8} = 40 \times 10^{-8} = 4.0 \times 10^{-7}

    Divide by n−1n - 1 to find the sample variance s2s^2: s2=4.0×10−75−1=1.0×10−7 M2s^2 = \frac{4.0 \times 10^{-7}}{5 - 1} = 1.0 \times 10^{-7}\text{ M}^2

    Taking the square root gives the sample standard deviation: s=1.0×10−7≈0.0003162 Ms = \sqrt{1.0 \times 10^{-7}} \approx 0.0003162\text{ M}


Part (b): Degrees of Freedom and tt-Statistic

  1. Degrees of freedom (dfdf): df=n−1=5−1=4df = n - 1 = 5 - 1 = 4
  2. Standard error of the mean (SESE): SE=sn=0.00031625≈0.0001414 MSE = \frac{s}{\sqrt{n}} = \frac{0.0003162}{\sqrt{5}} \approx 0.0001414\text{ M}
  3. Test statistic (tt): For testing H0:μ=μ0=0.1000 MH_0: \mu = \mu_0 = 0.1000\text{ M} versus Ha:μ≠0.1000 MH_a: \mu \neq 0.1000\text{ M}: t=xˉ−μ0sn=0.1022−0.10000.0001414=0.00220.0001414≈15.56t = \frac{\bar{x} - \mu_0}{\frac{s}{\sqrt{n}}} = \frac{0.1022 - 0.1000}{0.0001414} = \frac{0.0022}{0.0001414} \approx 15.56

Part (c): PP-value and Experimental Conclusion

  1. Bounding the PP-value:

    • The test is two-tailed. A critical value with upper-tail area 0.0050.005 corresponds to a two-tailed probability of 2×0.005=0.012 \times 0.005 = 0.01, with t0.005=4.604t_{0.005} = 4.604.
    • A critical value with upper-tail area 0.00050.0005 corresponds to a two-tailed probability of 2×0.0005=0.0012 \times 0.0005 = 0.001, with t0.0005=8.610t_{0.0005} = 8.610.
    • Since the calculated statistic ∣t∣=15.56>8.610|t| = 15.56 > 8.610, the observed result falls much further into the tail than the 0.0010.001 critical threshold. Therefore: P-value<0.001(specifically, P≈0.0001)P\text{-value} < 0.001 \quad (\text{specifically, } P \approx 0.0001)
  2. Conclusion at α=0.01\alpha = 0.01:

    • Because P-value<0.001<α=0.01P\text{-value} < 0.001 < \alpha = 0.01 (or equivalently, t=15.56>tcrit=4.604t = 15.56 > t_{\text{crit}} = 4.604), we reject H0H_0.
    • There is strong experimental evidence that the true mean concentration of the standardized NaOH\ce{NaOH} solution differs significantly from the nominal 0.1000 M0.1000\text{ M}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates population standard deviation by dividing by n = 5 instead of n - 1 = 4 in the denominator of the variance formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xˉ=0.1024+0.1018+0.1026+0.1020+0.10225=0.1022 M\bar{x} = \frac{0.1024 + 0.1018 + 0.1026 + 0.1020 + 0.1022}{5} = 0.1022\text{ M}

  2. Step 2

    ∑(x−xˉ)2=0.00022+(−0.0004)2+0.00042+(−0.0002)2+02=4.0×10−7  ⟹  s=4.0×10−75=0.0002828 M\sum (x - \bar{x})^2 = 0.0002^2 + (-0.0004)^2 + 0.0004^2 + (-0.0002)^2 + 0^2 = 4.0 \times 10^{-7} \implies s = \sqrt{\frac{4.0 \times 10^{-7}}{5}} = 0.0002828\text{ M}

    Correct

    s=∑(xi−xˉ)2n−1=4.0×10−74=1.0×10−7≈0.0003162 Ms = \sqrt{\frac{\sum (x_i - \bar{x})^2}{n - 1}} = \sqrt{\frac{4.0 \times 10^{-7}}{4}} = \sqrt{1.0 \times 10^{-7}} \approx 0.0003162\text{ M}

    You calculated the sum of squared deviations accurately, but you divided by n=5n = 5 instead of the sample degrees of freedom n−1=4n - 1 = 4. Dividing by nn gives the population standard deviation rather than the sample standard deviation ss.

  3. Step 3

    df=5−1=4df = 5 - 1 = 4

  4. Step 4

    t=0.1022−0.10000.00028285=0.00220.0001265=17.39t = \frac{0.1022 - 0.1000}{\frac{0.0002828}{\sqrt{5}}} = \frac{0.0022}{0.0001265} = 17.39

    Correct

    t=xˉ−μ0sn=0.1022−0.10000.00031625≈15.56t = \frac{\bar{x} - \mu_0}{\frac{s}{\sqrt{n}}} = \frac{0.1022 - 0.1000}{\frac{0.0003162}{\sqrt{5}}} \approx 15.56

    Your formula and substitution method for tt are correct, but your numerical value was affected by substituting the underestimated standard deviation from step 2.

  5. Step 5

    Since t=17.39>8.610,  P<0.001  ⟹  Reject H0 at α=0.01;  the concentration differs significantly from 0.1000 M.\text{Since } t = 17.39 > 8.610,\; P < 0.001 \implies \text{Reject } H_0 \text{ at } \alpha = 0.01;\; \text{the concentration differs significantly from } 0.1000\text{ M}.

    Correct

    Since ∣t∣=15.56>8.610,  P<0.001  ⟹  Reject H0 at α=0.01;  there is strong evidence that the true mean concentration differs from 0.1000 M.\text{Since } |t| = 15.56 > 8.610,\; P < 0.001 \implies \text{Reject } H_0 \text{ at } \alpha = 0.01;\; \text{there is strong evidence that the true mean concentration differs from } 0.1000\text{ M}.

    Your decision rule and interpretation are completely sound. Because the correct t=15.56t = 15.56 also exceeds 8.6108.610, the conclusion to reject H0H_0 remains valid.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the sample mean xˉ=0.1022 M\bar{x} = 0.1022\text{ M} and the sum of squared deviations perfectly.

You identified the correct degrees of freedom df=4df = 4 and set up the one-sample tt-test ratio properly.

You correctly compared the test statistic against the critical value to establish the PP-value bound and make the proper rejection decision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sample vs. Population Standard Deviation Formula

You divided by nn under the radical instead of dividing by n−1n - 1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sample standard deviation formula s=∑(xi−xˉ)2n−1s = \sqrt{\frac{\sum (x_i - \bar{x})^2}{n - 1}} with the population standard deviation formula σ=∑(xi−μ)2N\sigma = \sqrt{\frac{\sum (x_i - \mu)^2}{N}}. Because sample data use xˉ\bar{x} as an estimate of μ\mu, Bessel's correction (n−1n - 1) is required to ensure s2s^2 is an unbiased estimator of σ2\sigma^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Bessel's Correction for Sample Standard Deviation
  • s=∑(xi−xˉ)2n−1s = \sqrt{\frac{\sum (x_i - \bar{x})^2}{n - 1}}, whereas σ=∑(xi−μ)2N\sigma = \sqrt{\frac{\sum (x_i - \mu)^2}{N}}.

  • Whenever working with a small experimental sample where xˉ\bar{x} is calculated from the data, always divide the sum of squared deviations by n−1n - 1, not nn.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate sample variance: s2=4.0×10−75−1=4.0×10−74=1.0×10−7 M2s^2 = \frac{4.0 \times 10^{-7}}{5 - 1} = \frac{4.0 \times 10^{-7}}{4} = 1.0 \times 10^{-7}\text{ M}^2.

  2. Compute sample standard deviation: s=1.0×10−7≈0.0003162 Ms = \sqrt{1.0 \times 10^{-7}} \approx 0.0003162\text{ M}.

  3. Compute standard error: SE=sn=0.00031625≈0.0001414 MSE = \frac{s}{\sqrt{n}} = \frac{0.0003162}{\sqrt{5}} \approx 0.0001414\text{ M}.

  4. Recompute test statistic: t=0.1022−0.10000.0001414≈15.56t = \frac{0.1022 - 0.1000}{0.0001414} \approx 15.56.

Final answer

(a) xˉ=0.1022 M\bar{x} = 0.1022\text{ M}, s=0.0003162 Ms = 0.0003162\text{ M}; (b) df=4df = 4, t≈15.56t \approx 15.56; (c) P<0.001P < 0.001, Reject H0H_0 at α=0.01\alpha = 0.01.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your standard deviation formula before calculating SESE to ensure the denominator reflects degrees of freedom (n−1n - 1).

  • Review Bessel's correction and practice calculating sample variance s2s^2 on small sample datasets.

OverviewACEpath Teacher's Diagnosis

02 The student omits the standard error factor √n in the test statistic formula, dividing the difference directly by s instead of s/√n.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xˉ=0.1024+0.1018+0.1026+0.1020+0.10225=0.1022 M  ⟹  s=4.0×10−74=0.0003162 M\bar{x} = \frac{0.1024 + 0.1018 + 0.1026 + 0.1020 + 0.1022}{5} = 0.1022\text{ M} \implies s = \sqrt{\frac{4.0 \times 10^{-7}}{4}} = 0.0003162\text{ M}

  2. Step 2

    df=5−1=4  ⟹  t=xˉ−μ0s=0.1022−0.10000.0003162=6.958df = 5 - 1 = 4 \implies t = \frac{\bar{x} - \mu_0}{s} = \frac{0.1022 - 0.1000}{0.0003162} = 6.958

    Correct

    df=4  ⟹  t=xˉ−μ0sn=0.1022−0.10000.00031625≈15.56df = 4 \implies t = \frac{\bar{x} - \mu_0}{\frac{s}{\sqrt{n}}} = \frac{0.1022 - 0.1000}{\frac{0.0003162}{\sqrt{5}}} \approx 15.56

    You correctly identified df=4df = 4, but you used ss in the denominator of the test statistic rather than the standard error of the mean, SE=snSE = \frac{s}{\sqrt{n}}.

  3. Step 3

    Since \text{Since } 4.604 < t = 6.958 < 8.610,; 0.001 < P < 0.01   ⟹  \implies Reject \text{Reject } H_0  at \text{ at } α\alpha = 0.01; the concentration differs significantly from \text{; the concentration differs significantly from } 0.1000 M.\text{ M.}

    Correct

    Since \text{Since } t = 15.56 > 8.610,; P < 0.001   ⟹  \implies Reject \text{Reject } H_0  at \text{ at } α\alpha = 0.01; the concentration differs significantly from \text{; the concentration differs significantly from } 0.1000 M.\text{ M.}

    Your critical value comparison and final decision were logically carried out from your tt-value, but your bound 0.001<P<0.010.001 < P < 0.01 was thrown off by the missing n\sqrt{n} factor.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the sample mean xˉ=0.1022 M\bar{x} = 0.1022\text{ M} and sample standard deviation s=0.0003162 Ms = 0.0003162\text{ M} accurately to four significant figures.

You correctly identified the degrees of freedom as df=5−1=4df = 5 - 1 = 4.

You correctly compared your calculated test statistic against the two-tailed Student's tt critical values to determine rejection of the null hypothesis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Sample Size Factor in Standard Error

You divided the difference xˉ−μ0\bar{x} - \mu_0 directly by ss instead of dividing by the standard error of the mean, SE=snSE = \frac{s}{\sqrt{n}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sample standard deviation ss (which measures the spread of individual observations) with the standard error of the mean sn\frac{s}{\sqrt{n}} (which measures the variability of sample averages across repeated samples of size nn).

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Deviation vs. Standard Error
  • The sampling distribution of xˉ\bar{x} has standard error SE=snSE = \frac{s}{\sqrt{n}}, not ss.

  • Always compute SE=snSE = \frac{s}{\sqrt{n}} as a separate checkpoint before plugging it into the denominator of the tt-statistic.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the standard error: SE=sn=0.00031625≈0.0001414 MSE = \frac{s}{\sqrt{n}} = \frac{0.0003162}{\sqrt{5}} \approx 0.0001414\text{ M}.

  2. Compute the test statistic: t=0.1022−0.10000.0001414=0.00220.0001414≈15.56t = \frac{0.1022 - 0.1000}{0.0001414} = \frac{0.0022}{0.0001414} \approx 15.56.

  3. Compare with the critical values for df=4df = 4: since t=15.56>8.610=t0.0005t = 15.56 > 8.610 = t_{0.0005}, the two-tailed PP-value satisfies P<0.001P < 0.001.

Final answer

(a) xˉ=0.1022 M\bar{x} = 0.1022\text{ M}, s=0.0003162 Ms = 0.0003162\text{ M}; (b) df=4df = 4, t≈15.56t \approx 15.56; (c) P<0.001P < 0.001, reject H0H_0 at α=0.01\alpha = 0.01.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out SE=snSE = \frac{s}{\sqrt{n}} explicitly whenever setting up a one-sample tt-test.

  • Remember that as sample size nn increases, sample means cluster more tightly around μ\mu, which is why the denominator must scale by 1n\frac{1}{\sqrt{n}}.

OverviewACEpath Teacher's Diagnosis

03 The student treats the two-tailed test critical values as one-tailed tail probabilities, reporting P < 0.0005 instead of doubling the tail area to P < 0.001.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xˉ=0.1022 M  ⟹  s=4.0×10−74=0.0003162 M\bar{x} = 0.1022\text{ M} \implies s = \sqrt{\frac{4.0 \times 10^{-7}}{4}} = 0.0003162\text{ M}

  2. Step 2

    df=4  ⟹  t=0.1022−0.10000.0003162/5=15.56df = 4 \implies t = \frac{0.1022 - 0.1000}{0.0003162 / \sqrt{5}} = 15.56

  3. Step 3

    Since t=15.56>8.610,  P<0.0005\text{Since } t = 15.56 > 8.610,\; P < 0.0005

    Correct

    Since ∣t∣=15.56>t0.0005=8.610,  P=2×P(T>15.56)<2(0.0005)=0.001\text{Since } |t| = 15.56 > t_{0.0005} = 8.610,\; P = 2 \times P(T > 15.56) < 2(0.0005) = 0.001

    Because the alternative hypothesis is two-sided (Ha:μ≠0.1000 MH_a: \mu \neq 0.1000\text{ M}), the PP-value is the sum of both tail areas. A one-tail critical value of t0.0005=8.610t_{0.0005} = 8.610 corresponds to a two-tailed upper bound of 2×0.0005=0.0012 \times 0.0005 = 0.001.

  4. Step 4

    Reject H0 at α=0.01; the concentration is significantly different from 0.1000 M.\text{Reject } H_0 \text{ at } \alpha = 0.01; \text{ the concentration is significantly different from } 0.1000\text{ M.}

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the sample statistics xˉ=0.1022 M\bar{x} = 0.1022\text{ M} and s=0.0003162 Ms = 0.0003162\text{ M} accurately.

You set up and evaluated the one-sample tt-statistic correctly with df=4df = 4.

You correctly compared the test statistic against the critical value to reject the null hypothesis at α=0.01\alpha = 0.01.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 2 for two-tailed P-value

You read the subscript of the critical value t0.0005t_{0.0005} directly as the two-tailed PP-value bound instead of doubling the single tail area.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing one-tailed tail area with two-tailed PP-value when using critical value tables. For a two-sided test (Ha:μ≠μ0H_a: \mu \neq \mu_0), extreme deviations can occur in either direction, so P=2×P(T≥∣t∣)P = 2 \times P(T \ge |t|).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the alternative hypothesis direction
  • If HaH_a contains ≠\neq, the test is two-tailed and probability mass exists in both tails.

  • Always multiply the single-tail probability by 22 when computing or bounding a two-tailed PP-value.

Interpret critical value notation
  • The notation tαt_{\alpha} typically represents the value having area α\alpha in a single tail: P(T>tα)=αP(T > t_{\alpha}) = \alpha.

  • For a two-tailed test with ∣t∣>tα|t| > t_{\alpha}, write P<2αP < 2\alpha.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the hypothesis test H0:μ=0.1000 MH_0: \mu = 0.1000\text{ M} versus Ha:μ≠0.1000 MH_a: \mu \neq 0.1000\text{ M} is two-tailed.

  2. Note that the critical value t0.0005=8.610t_{0.0005} = 8.610 has an upper-tail area of 0.00050.0005.

  3. Double this tail area for the two-sided alternative: P=2×P(T>15.56)<2×0.0005=0.001P = 2 \times P(T > 15.56) < 2 \times 0.0005 = 0.001.

Final answer

Since ∣t∣=15.56>8.610|t| = 15.56 > 8.610, the two-tailed PP-value satisfies P<0.001P < 0.001. Reject H0H_0 at α=0.01\alpha = 0.01.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing down the PP-value, check whether HaH_a uses >>, <<, or ≠\neq.

  • Practice converting between one-tailed critical value subscripts and two-tailed PP-value bounds.

Lock it in

Similar question

01

A chemist records four replicate absorbance readings: 0.2020.202, 0.2060.206, 0.2040.204, and 0.2080.208. Calculate the sample mean xˉ\bar{x} and the sample standard deviation ss.

Answer

xˉ=0.205\bar{x} = 0.205, s≈0.002582s \approx 0.002582. Key steps: ∑xi=0.820  ⟹  xˉ=0.205\sum x_i = 0.820 \implies \bar{x} = 0.205. Squared deviations are (−0.003)2+(0.001)2+(−0.001)2+(0.003)2=2.0×10−5(-0.003)^2 + (0.001)^2 + (-0.001)^2 + (0.003)^2 = 2.0 \times 10^{-5}. Divide by n−1=3n - 1 = 3: s2=2.0×10−53≈6.667×10−6s^2 = \frac{2.0 \times 10^{-5}}{3} \approx 6.667 \times 10^{-6}, so s=6.667×10−6≈0.002582s = \sqrt{6.667 \times 10^{-6}} \approx 0.002582.

02

A quality-control sample of n=10n = 10 tablets has sample mean mass xˉ=502.4 mg\bar{x} = 502.4\text{ mg} and ∑(xi−xˉ)2=81.0 mg2\sum (x_i - \bar{x})^2 = 81.0\text{ mg}^2. Find the sample standard deviation ss, the standard error of the mean SESE, and the test statistic tt for H0:μ=500.0 mgH_0: \mu = 500.0\text{ mg}.

Answer

s=3.0 mgs = 3.0\text{ mg}, SE≈0.9487 mgSE \approx 0.9487\text{ mg}, t≈2.53t \approx 2.53. Key steps: s2=81.010−1=9.0  ⟹  s=3.0 mgs^2 = \frac{81.0}{10 - 1} = 9.0 \implies s = 3.0\text{ mg}. SE=3.010≈0.9487 mgSE = \frac{3.0}{\sqrt{10}} \approx 0.9487\text{ mg}. Then t=502.4−500.00.9487=2.40.9487≈2.53t = \frac{502.4 - 500.0}{0.9487} = \frac{2.4}{0.9487} \approx 2.53.

03

Six replicate titrations yield xˉ=24.85 mL\bar{x} = 24.85\text{ mL} with s=0.12 mLs = 0.12\text{ mL}. Test H0:μ=25.00 mLH_0: \mu = 25.00\text{ mL} versus Ha:μ≠25.00 mLH_a: \mu \neq 25.00\text{ mL} at α=0.05\alpha = 0.05. (Critical value for df=5df = 5 is t0.025=2.571t_{0.025} = 2.571).

Answer

df=5df = 5, t=−3.06t = -3.06; reject H0H_0. Key steps: SE=0.126≈0.04899 mLSE = \frac{0.12}{\sqrt{6}} \approx 0.04899\text{ mL}. t=24.85−25.000.04899≈−3.06t = \frac{24.85 - 25.00}{0.04899} \approx -3.06. Since ∣t∣=3.06>2.571|t| = 3.06 > 2.571, the two-tailed PP-value is less than 0.050.05, so we reject H0H_0.

Loading workspace…