Resources

In the Cartesian coordinate plane, parallelogram RSTURSTU has vertices placed such that side RSRS lies along the positive xx-axis from R(0,0)R(0, 0) to S(8,0)S(8, 0), and vertex UU is located in the second quadrant at (−3,4)(-3, 4). A student incorrectly calculates the coordinates of vertex TT by assuming a rightward shift of the upper side without accounting for the signed direction of vector RU⃗\vec{RU}. Determine the true coordinates of TT and the signed slope of diagonal RTRT.

Answer and steps

Final answer

The true coordinates of vertex TT are (5,4)(5, 4), and the slope of diagonal RTRT is 45\frac{4}{5}.

Steps

01

Determine the coordinates of vertex TT

To find the coordinates of vertex TT and the slope of diagonal RTRT, we use the vector and geometric properties of a parallelogram.

In any parallelogram RSTURSTU, the vertices are ordered cyclically along the perimeter as R→S→T→UR \to S \to T \to U. Consequently, opposite sides are parallel and equal in length, meaning their directed displacement vectors are identical: UT⃗=RS⃗\vec{UT} = \vec{RS}

  1. Find vector RS⃗\vec{RS} from R(0,0)R(0, 0) to S(8,0)S(8, 0): RS⃗=(8−0,0−0)=(8,0)\vec{RS} = (8 - 0, 0 - 0) = (8, 0)
  2. Since UT⃗=RS⃗\vec{UT} = \vec{RS}, vertex TT is obtained by applying the translation vector (8,0)(8, 0) to vertex U(−3,4)U(-3, 4): T=(−3+8,4+0)=(5,4)T = (-3 + 8, 4 + 0) = (5, 4)

Alternative Check via Midpoints:
The diagonals of a parallelogram bisect each other. The midpoint of diagonal SUSU is: M=(8+(−3)2,0+42)=(52,2)M = \left(\frac{8 + (-3)}{2}, \frac{0 + 4}{2}\right) = \left(\frac{5}{2}, 2\right) Since MM must also be the midpoint of RTRT, with R(0,0)R(0, 0): (xT+02,yT+02)=(52,2)  ⟹  (xT,yT)=(5,4)\left(\frac{x_T + 0}{2}, \frac{y_T + 0}{2}\right) = \left(\frac{5}{2}, 2\right) \implies (x_T, y_T) = (5, 4)


02

Calculate the slope of diagonal RTRT

Diagonal RTRT connects the origin R(0,0)R(0, 0) to T(5,4)T(5, 4). Using the slope formula m=y2−y1x2−x1m = \frac{y_2 - y_1}{x_2 - x_1}: mRT=4−05−0=45m_{RT} = \frac{4 - 0}{5 - 0} = \frac{4}{5}


Common Pitfall to Avoid

Ensure the vertices follow the standard cyclic order R→S→T→UR \to S \to T \to U. Treating the top edge as vector TU⃗\vec{TU} instead of UT⃗\vec{UT} reverses the translation direction, leading to an incorrect position for TT.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the absolute horizontal distance of 3 units instead of the signed x-component -3, erroneously adding 3 to the x-coordinate of S.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vector RU=(3,4)\text{vector } RU = (3, 4)

    Correct

    RU⃗=(−3−0,4−0)=(−3,4)\vec{RU} = (-3 - 0, 4 - 0) = (-3, 4)

    You found the magnitude of the horizontal shift rather than its directed signed component. Because UU has coordinates (−3,4)(-3, 4) and RR is at (0,0)(0, 0), the vector is RU⃗=(−3,4)\vec{RU} = (-3, 4).

  2. Step 2

    T=(8+3,0+4)=(11,4)T = (8+3, 0+4) = (11, 4)

    Correct

    T=S+RU⃗=(8+(−3),0+4)=(5,4)T = S + \vec{RU} = (8 + (-3), 0 + 4) = (5, 4)

    You correctly added your displacement vector to vertex S(8,0)S(8, 0), but using the incorrect vector (3,4)(3, 4) resulted in T=(11,4)T = (11, 4) instead of (5,4)(5, 4).

  3. Step 3

    slope of RT=4−011−0=411\text{slope of } RT = \frac{4-0}{11-0} = \frac{4}{11}

    Correct

    mRT=4−05−0=45m_{RT} = \frac{4 - 0}{5 - 0} = \frac{4}{5}

    You applied the slope formula correctly using R(0,0)R(0, 0) and your point T(11,4)T(11, 4), but the numerical value was affected by the earlier coordinate error.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that opposite sides of a parallelogram are equal vectors, meaning ST⃗=RU⃗\vec{ST} = \vec{RU}.

You correctly used the coordinates of R(0,0)R(0, 0) and TT to set up the slope formula for diagonal RTRT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Signed vector component dropped

You dropped the negative sign on the xx-component when calculating RU⃗\vec{RU} from R(0,0)R(0, 0) to U(−3,4)U(-3, 4).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing scalar distance with signed vector displacement in the Cartesian plane leads to adding positive offsets regardless of quadrant direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate Directed Vectors with Signs
  • For points A(x1,y1)A(x_1, y_1) and B(x2,y2)B(x_2, y_2), the directed displacement vector is AB⃗=(x2−x1,y2−y1)\vec{AB} = (x_2 - x_1, y_2 - y_1), preserving all negative signs.

  • Always subtract initial coordinates from terminal coordinates: RU⃗=(−3−0,4−0)=(−3,4)\vec{RU} = (-3 - 0, 4 - 0) = (-3, 4).

Sketch Quadrants as a Sanity Check
  • If a vertex is in the second quadrant, moving toward it from the origin requires a negative horizontal shift.

  • Check the visual orientation: translating rightward by 88 units from U(−3,4)U(-3, 4) must end at x=−3+8=5x = -3 + 8 = 5, not 1111.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the directed vector: RU⃗=(−3−0,4−0)=(−3,4)\vec{RU} = (-3 - 0, 4 - 0) = (-3, 4).

  2. Apply the vector to vertex S(8,0)S(8, 0): T=S+RU⃗=(8+(−3),0+4)=(5,4)T = S + \vec{RU} = (8 + (-3), 0 + 4) = (5, 4).

  3. Calculate the slope of diagonal RTRT connecting (0,0)(0, 0) to (5,4)(5, 4): m=4−05−0=45m = \frac{4 - 0}{5 - 0} = \frac{4}{5}.

Final answer

T(5,4)T(5, 4) and mRT=45m_{RT} = \frac{4}{5}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that vector components retain negative signs whenever moving left or down.

  • Use midpoint bisection of diagonals as an independent verification method for parallelogram vertices.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the vertices order and treats vector UT as equal to vector RS added to R instead of U, or calculates T by adding the vector RS = (8, 0) to S instead of U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=S+RS⃗=(8+8,0+0)  ⟹  T=(16,0)T = S + \vec{RS} = (8+8, 0+0) \implies T = (16, 0)

    Correct

    T=U+RS⃗=(−3+8,4+0)=(5,4)T = U + \vec{RS} = (-3 + 8, 4 + 0) = (5, 4)

    In a parallelogram named RSTURSTU, vertices follow cyclic order around the perimeter, so side RS⃗\vec{RS} corresponds to side UT⃗\vec{UT}. Translating from U(−3,4)U(-3, 4) by vector RS⃗=(8,0)\vec{RS} = (8, 0) gives T(5,4)T(5, 4). Adding RS⃗\vec{RS} to SS extends the baseline along the xx-axis instead of finding the opposite upper vertex.

  2. Step 2

    slope of RT=0−016−0=0\text{slope of } RT = \frac{0 - 0}{16 - 0} = 0

    Correct

    mRT=4−05−0=45m_{RT} = \frac{4 - 0}{5 - 0} = \frac{4}{5}

    You correctly applied the slope formula m=y2−y1x2−x1m = \frac{y_2 - y_1}{x_2 - x_1} to your point T(16,0)T(16, 0) and R(0,0)R(0, 0), but the result was altered by the incorrect coordinates from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified vector addition as a valid method for finding missing coordinates in a coordinate plane.

You applied the two-point slope formula accurately with the coordinates you had calculated.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parallelogram Vertex Ordering

You added the base vector RS⃗\vec{RS} to the base endpoint SS rather than to the opposite vertex UU.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not trace the cyclic vertex order R→S→T→UR \to S \to T \to U around the perimeter of the quadrilateral, which led you to extend the baseline along the xx-axis instead of connecting opposite parallel sides RS⃗\vec{RS} and UT⃗\vec{UT}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cyclic Vertex Naming
  • When a polygon is named RSTURSTU, vertices must be visited sequentially along its boundary: R→S→T→UR \to S \to T \to U.

  • Sketch a quick loop or outline labeled R→S→T→UR \to S \to T \to U to verify which pairs of sides are opposite before writing vector equations.

Opposite Vector Equivalence
  • In parallelogram RSTURSTU, UT⃗=RS⃗\vec{UT} = \vec{RS} and ST⃗=RU⃗\vec{ST} = \vec{RU}.

  • Set T=U+RS⃗T = U + \vec{RS} or T=S+RU⃗T = S + \vec{RU} so the translation starts from an adjacent vertex rather than doubling the same side.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the displacement vector of base RSRS: RS⃗=(8−0,0−0)=(8,0)\vec{RS} = (8 - 0, 0 - 0) = (8, 0).

  2. Apply this vector translation to the opposite vertex U(−3,4)U(-3, 4): T=U+RS⃗=(−3+8,4+0)=(5,4)T = U + \vec{RS} = (-3 + 8, 4 + 0) = (5, 4).

  3. Calculate the slope of diagonal RTRT connecting R(0,0)R(0, 0) and T(5,4)T(5, 4): mRT=4−05−0=45m_{RT} = \frac{4 - 0}{5 - 0} = \frac{4}{5}.

Final answer

The true coordinates of vertex TT are (5,4)(5, 4), and the signed slope of diagonal RTRT is 45\frac{4}{5}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the four vertices on a rough coordinate grid before computing to ensure that TT lies in the upper half-plane alongside UU.

  • Practice writing vector equalities directly from polygon names, matching the head and tail of each segment in the same cyclic direction.

OverviewACEpath Teacher's Diagnosis

03 The student correctly finds the coordinates of T as (5, 4), but inverts the slope formula as run over rise instead of rise over run.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vector RU=(−3,4)  ⟹  T=(8−3,0+4)=(5,4)\text{vector } RU = (-3, 4) \implies T = (8 - 3, 0 + 4) = (5, 4)

  2. Step 2

    slope of RT=5−04−0=54\text{slope of } RT = \frac{5 - 0}{4 - 0} = \frac{5}{4}

    Correct

    mRT=yT−yRxT−xR=4−05−0=45m_{RT} = \frac{y_T - y_R}{x_T - x_R} = \frac{4 - 0}{5 - 0} = \frac{4}{5}

    You inverted the slope definition by calculating ΔxΔy\frac{\Delta x}{\Delta y} instead of ΔyΔx\frac{\Delta y}{\Delta x} (rise over run).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used vector translation along opposite parallel sides to determine the coordinates of vertex TT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Slope Ratio

You accidentally placed the xx-coordinates in the numerator and the yy-coordinates in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of coordinates in the slope ratio, writing runrise\frac{\text{run}}{\text{rise}} (ΔxΔy\frac{\Delta x}{\Delta y}) rather than the standard definition riserun\frac{\text{rise}}{\text{run}} (ΔyΔx\frac{\Delta y}{\Delta x}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Slope Ratio Definition
  • m=ΔyΔx=y2−y1x2−x1m = \frac{\Delta y}{\Delta x} = \frac{y_2 - y_1}{x_2 - x_1}

  • Always write out ΔyΔx\frac{\Delta y}{\Delta x} or whisper 'rise over run' before inserting coordinate numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the coordinates: R(0,0)R(0, 0) and T(5,4)T(5, 4).

  2. Set up the slope formula with vertical change on top: m=yT−yRxT−xRm = \frac{y_T - y_R}{x_T - x_R}.

  3. Substitute the values: m=4−05−0=45m = \frac{4 - 0}{5 - 0} = \frac{4}{5}.

Final answer

The true coordinates of vertex TT are (5,4)(5, 4), and the slope of diagonal RTRT is 45\frac{4}{5}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic 'rise over run' to ensure vertical difference Δy\Delta y stays in the numerator.

  • Practice computing slopes directly from points with different xx and yy magnitudes to avoid coordinate transposition.

Lock it in

Similar question

01

In the coordinate plane, parallelogram ABCDABCD has vertices A(0,0)A(0, 0), B(7,0)B(7, 0), and D(−4,3)D(-4, 3). Find the coordinates of vertex CC and the slope of diagonal ACAC.

Answer

Coordinates: C(3,3)C(3, 3); slope: mAC=1m_{AC} = 1. Key step: AD⃗=(−4,3)\vec{AD} = (-4, 3), so C=B+AD⃗=(7−4,0+3)=(3,3)C = B + \vec{AD} = (7 - 4, 0 + 3) = (3, 3). Then m=3−03−0=1m = \frac{3 - 0}{3 - 0} = 1.

02

Parallelogram PQRSPQRS has vertices P(2,1)P(2, 1), Q(9,1)Q(9, 1), and S(−1,6)S(-1, 6). Find the coordinates of vertex RR and verify your answer using the midpoint of diagonal QSQS.

Answer

Coordinates: R(6,6)R(6, 6). Key steps: PS⃗=(−1−2,6−1)=(−3,5)\vec{PS} = (-1 - 2, 6 - 1) = (-3, 5). R=Q+PS⃗=(9−3,1+5)=(6,6)R = Q + \vec{PS} = (9 - 3, 1 + 5) = (6, 6). Midpoint check: midpoint of QSQS is (9+(−1)2,1+62)=(4,3.5)(\frac{9 + (-1)}{2}, \frac{1 + 6}{2}) = (4, 3.5); midpoint of PRPR is (2+62,1+62)=(4,3.5)(\frac{2 + 6}{2}, \frac{1 + 6}{2}) = (4, 3.5), confirming the result.

03

A quadrilateral KLMNKLMN has vertices K(−2,−1)K(-2, -1), L(4,1)L(4, 1), and N(−5,3)N(-5, 3). Determine the coordinates of vertex MM such that KLMNKLMN is a parallelogram, then calculate the product of the slopes of its two diagonals KMKM and LNLN.

Answer

Coordinates: M(1,5)M(1, 5); product of diagonal slopes: −49-\frac{4}{9}. Key steps: KN⃗=(−5−(−2),3−(−1))=(−3,4)\vec{KN} = (-5 - (-2), 3 - (-1)) = (-3, 4). Thus M=L+KN⃗=(4−3,1+4)=(1,5)M = L + \vec{KN} = (4 - 3, 1 + 4) = (1, 5). Slope of KM=5−(−1)1−(−2)=63=2KM = \frac{5 - (-1)}{1 - (-2)} = \frac{6}{3} = 2. Slope of LN=3−1−5−4=2−9=−29LN = \frac{3 - 1}{-5 - 4} = \frac{2}{-9} = -\frac{2}{9}. Product: 2×(−29)=−492 \times (-\frac{2}{9}) = -\frac{4}{9}.

Loading workspace…