Resources
A student measures the absorbance of a dye solution at three standard wavelengths to determine the unknown concentrations of two reacting dyes, and (in ). According to Beer's Law, the measurements generate the overdetermined linear system: . Determine whether this experimental calibration system is consistent or inconsistent, and state whether it possesses one solution, no solution, or infinitely many solutions.
Answer and steps
Final answer
No solution (inconsistent). The first two equations describe the same underlying relation , but the third equation yields , creating a direct contradiction due to experimental error.
Steps
Simplify Equation 1
To determine whether the system is consistent and how many solutions it possesses, simplify each linear equation to its standard integer form: Given the system of three linear equations:
Multiply both sides of the first equation by to clear the decimals:
Divide the entire equation by the greatest common divisor, :
Simplify Equation 2
Multiply both sides by :
Divide by :
Equations (1) and (2) represent the exact same line, meaning any pair satisfying Equation 1 also satisfies Equation 2.
Simplify Equation 3
Multiply both sides by :
To compare the left-hand side directly with the first two equations, divide the entire equation by :
Compare the Equations and Conclude
Comparing Equation 1 (or 2) with Equation 3:
3 C_A + 2 C_B &= 15 \\ 3 C_A + 2 C_B &= \frac{185}{12} \approx 15.4167 \end{aligned}$$The left-hand sides are identical, but the right-hand sides differ (). Geometrically, these equations represent two distinct parallel lines with the same slope () but different intercepts. Because parallel lines never intersect, there is no pair that satisfies all three equations simultaneously.
- Consistency: The system is inconsistent.
- Number of solutions: The system has no solution.
Pitfall to Avoid: Do not stop after noticing that Equation 2 is a direct multiple of Equation 1 (). While the sub-system of the first two equations has infinitely many solutions, an overdetermined system requires all equations to hold true simultaneously. Any single contradiction makes the entire system inconsistent.
Typical errors
01 The student only compares the first two equations, notices they are linearly dependent multiples of each other, and prematurely concludes the system has infinitely many solutions without checking the third equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Equation 2 is : The equations are linearly dependent and represent the same line.
- Step 2
The system is consistent and possesses infinitely many solutions.
CorrectCompare with Equation 3: . Since , Equation 3 represents a distinct parallel line. Therefore, the system is inconsistent and possesses no solution.
You made an error by stopping after the first two equations. A solution to a linear system must satisfy all given equations simultaneously. Because Equation 3 produces while Equations 1 and 2 require , there is no common solution.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly multiplied Equation 1 by to demonstrate linear dependence between the first two equations.
You correctly recognized that two identical lines share infinitely many common points.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated an overdetermined system as if it were defined solely by its first two equations, overlooking the requirement that every solution must satisfy all three equations simultaneously.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check all equations in an overdetermined system
A point is a solution to a system if and only if it satisfies every single equation in that system.
Always substitute or reduce every remaining equation before stating the final consistency or number of solutions.
CORRECTED PATH
ACEpath Teacher's DemonstrationFrom Step 1, Equations 1 and 2 simplify to .
Simplify Equation 3 by multiplying by : .
Divide by to match the left-hand side: .
Because , the lines are parallel and do not intersect.
The system is inconsistent and possesses no solution.
02 The student believes any overdetermined system (more equations than unknowns) automatically has no solution solely by definition of being overdetermined, rather than testing consistency.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
There are 3 equations and only 2 unknowns ( and ).
- Step 2
An overdetermined system has more equations than variables, so it is inconsistent and has no solution.
CorrectSimplify the equations to compare them: Equation 1 gives , Equation 2 gives , but Equation 3 gives . Because , these parallel lines never intersect, making the system inconsistent with no solution.
An overdetermined system is not automatically inconsistent. It can have a unique solution (if extra lines pass through the exact same intersection point) or infinitely many solutions (if equations are redundant multiples of each other). You must test whether the equations are algebraically compatible rather than assuming inconsistency from the count alone.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the system contains 3 equations and 2 unknowns ( and ).
You stated the correct final classification that the given system is inconsistent and has no solution.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the definition of an overdetermined system (more equations than unknowns) as an automatic guarantee of inconsistency, conflating an excess of constraints with an algebraic contradiction.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Overdetermined Possibilities
An overdetermined system can have a unique solution, infinitely many solutions, or no solution.
Never conclude 'no solution' based purely on having more equations than unknowns.
- Test Algebraic Compatibility
A system is inconsistent only if two or more equations produce a direct contradiction (such as where ).
Reduce equations to a common form or eliminate variables to verify whether a contradiction actually occurs.
CORRECTED PATH
ACEpath Teacher's DemonstrationSimplify the first equation by dividing by to get .
Simplify the second equation by dividing by to get , which is identical to the first.
Simplify the third equation by dividing by to get .
Compare the equations: contradicts because two parallel lines with different constants cannot intersect.
The system is inconsistent and has no solution because Equations 1 and 3 create an algebraic contradiction ().
03 The student rounds the right-hand side of equation 3 or makes an arithmetic error believing 3 × 0.60 = 1.85, falsely determining the third equation is also a multiple and thus concluding the system has infinitely many solutions.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
3 (0.12 C_A + 0.08 C_B = 0.60) 0.36 C_A + 0.24 C_B = 1.85
Correct3 (0.12 C_A + 0.08 C_B = 0.60) 0.36 C_A + 0.24 C_B = 1.80 1.85
Multiplying the first equation by gives . The third equation in the problem has a right-hand side of , so the third equation is not an exact scalar multiple of the first.
- Step 2Correct
Because the third equation's constant term is rather than , only the variable coefficients are proportional; the third equation is not a multiple of the first two.
- Step 3Correct
Two equations with identical linear combinations of variables but different constants represent parallel, non-intersecting lines, creating a contradiction that leaves the system with no solution.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that multiplying the first equation by matches the variable coefficients of the third equation.
You correctly calculated initially before crossing it out.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou crossed out the true product to force the result to match the right-hand side of Equation 3 ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that a small discrepancy in the constant term changes the geometric relationship from coincident lines (infinitely many solutions) to distinct parallel lines (no solution).
REASONING PATH
Your ACEpath teacher’s suggested approach- Strict Constant Checking
For two linear equations to represent the same line, both the coefficients AND the constant term must scale by the exact same factor.
Always compare . If , the lines are parallel and the system is inconsistent.
CORRECTED PATH
ACEpath Teacher's DemonstrationScale Equation 1 by : .
Compare with Equation 3: .
Subtract the scaled equation from Equation 3: .
The false statement proves the system is inconsistent and possesses no solution.
Lock it in
What does it mean for a system of linear equations to have a solution?
A solution must satisfy every equation in the system simultaneously. If even one equation contradicts the others, the whole system has no solution.
Similar question
Determine whether the following system is consistent or inconsistent, and state the number of solutions:
Answer
Inconsistent (no solution). Dividing the first equation by gives . Multiplying the second by gives . Dividing the third by gives . Since , the lines are parallel with no common intersection.
Determine whether the following overdetermined system has one solution, no solution, or infinitely many solutions:
Answer
One solution. The first two equations are identical (). Solving the remaining non-parallel system yields . Because this point satisfies all three equations, the system is consistent with exactly one solution.
Find the value of the constant that makes the following system consistent, and state the number of solutions for that :
Answer
; infinitely many solutions. Dividing the first equation by gives . Dividing the second by also gives . For the third equation to be consistent with the first two, must equal . When , all three equations represent the same line, resulting in infinitely many solutions.