Resources

A student defines the quotient function Q(x)=(fg)(x)Q(x) = \left(\frac{f}{g}\right)(x). It is given that f(x)=2x3−5x2−4x+12f(x) = 2x^3 - 5x^2 - 4x + 12 and that the simplified quotient function is Q(x)=2x+3Q(x) = 2x + 3 with a removable discontinuity at x=2x = 2 and an excluded domain value at x=−2x = -2. Reconstruct the original polynomial function g(x)g(x) in standard form, assuming g(x)g(x) is a monic quadratic polynomial.

Answer and steps

Final answer

g(x)=x2−4g(x) = x^2 - 4

Steps

01

Identify the factors of g(x)g(x) from the domain conditions

To reconstruct the polynomial g(x)g(x), we analyze the domain restrictions and discontinuities of the rational function Q(x)=f(x)g(x)Q(x) = \frac{f(x)}{g(x)}.

The quotient function Q(x)=f(x)g(x)Q(x) = \frac{f(x)}{g(x)} is defined for all xx where g(x)≠0g(x) \neq 0. Therefore, every discontinuity or domain restriction corresponds to a root of the denominator polynomial g(x)g(x):

  1. Removable Discontinuity at x=2x = 2: A removable discontinuity occurs at an input value where both the numerator and the denominator equal zero, creating a shared factor that cancels out. Thus, g(2)=0g(2) = 0, which means (x−2)(x - 2) is a factor of g(x)g(x).
  2. Excluded Domain Value at x=−2x = -2: Any point excluded from the domain of a rational function must cause division by zero. Thus, g(−2)=0g(-2) = 0, which means (x−(−2))=(x+2)(x - (-2)) = (x + 2) is a factor of g(x)g(x).
02

Form the polynomial g(x)g(x)

We are given that g(x)g(x) is a monic quadratic polynomial:

  • "Quadratic" means its degree is 22, so it has exactly two linear factors.
  • "Monic" means its leading coefficient is 11.

Using the two identified factors: g(x)=1⋅(x−2)(x+2)g(x) = 1 \cdot (x - 2)(x + 2)

03

Write g(x)g(x) in standard form

Expand the product using the difference of squares identity, (a−b)(a+b)=a2−b2(a - b)(a + b) = a^2 - b^2: g(x)=x2−4g(x) = x^2 - 4

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates g(x) strictly as f(x) / Q(x) using polynomial division, obtaining (x - 2)² = x² - 4x + 4 and ignoring the excluded domain value at x = -2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q(x)=f(x)g(x)  ⟹  g(x)=f(x)Q(x)  ⟹  g(x)=2x3−5x2−4x+122x+3Q(x) = \frac{f(x)}{g(x)} \implies g(x) = \frac{f(x)}{Q(x)} \implies g(x) = \frac{2x^3 - 5x^2 - 4x + 12}{2x + 3}

    Correct

    g(2)=0 and g(−2)=0  ⟹  g(x)=a(x−2)(x+2)g(2) = 0 \text{ and } g(-2) = 0 \implies g(x) = a(x - 2)(x + 2)

    You assumed g(x)g(x) could be obtained by dividing f(x)f(x) by the simplified quotient Q(x)=2x+3Q(x) = 2x + 3. Because Q(x)Q(x) is the simplified form after cancelling common factors, direct algebraic division misses the cancelled factors. You need to use the given discontinuities to find the roots of g(x)g(x).

  2. Step 2

    (2x3−5x2−4x+12)÷(2x+3)=x2−4x+4(2x^3 - 5x^2 - 4x + 12) \div (2x + 3) = x^2 - 4x + 4

    Correct

    g(x)=1⋅(x−2)(x+2)g(x) = 1 \cdot (x - 2)(x + 2)

    Your polynomial division is algebraically correct, but it is applied to the incorrect expression from Step 1.

  3. Step 3

    g(x)=x2−4x+4g(x) = x^2 - 4x + 4

    Correct

    g(x)=x2−4g(x) = x^2 - 4

    Because this conclusion relies on the division in Step 2 rather than the domain conditions, the final polynomial is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the general definition of a quotient function as Q(x)=f(x)g(x)Q(x) = \frac{f(x)}{g(x)}.

You accurately completed the polynomial division of 2x3−5x2−4x+122x^3 - 5x^2 - 4x + 12 by 2x+32x + 3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Domain Restrictions and Discontinuities in Rational Functions

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the simplified quotient function Q(x)=2x+3Q(x) = 2x + 3 as algebraically equivalent to f(x)g(x)\frac{f(x)}{g(x)} over all real numbers, attempting to solve for g(x)g(x) by division rather than interpreting the domain exclusions (x=2x = 2 and x=−2x = -2) as roots of the denominator g(x)g(x).

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Zeros from Domain Conditions
  • For any rational expression Q(x)=f(x)g(x)Q(x) = \frac{f(x)}{g(x)}, all domain exclusions—both removable discontinuities (holes) and non-removable discontinuities (vertical asymptotes)—correspond to zeros where g(x)=0g(x) = 0.

  • Set each excluded input value x=cx = c to a linear factor (x−c)(x - c) of the denominator g(x)g(x).

Constructing Monic Polynomials from Roots
  • A monic polynomial with known roots r1,r2,…,rnr_1, r_2, \dots, r_n has leading coefficient 11 and is expressed as (x−r1)(x−r2)⋯(x−rn)(x - r_1)(x - r_2)\cdots(x - r_n).

  • Multiply the linear factors together and expand into standard form.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the removable discontinuity at x=2x = 2 requires g(2)=0g(2) = 0, so (x−2)(x - 2) is a factor of g(x)g(x).

  2. Identify that the excluded domain value at x=−2x = -2 requires g(−2)=0g(-2) = 0, so (x+2)(x + 2) is a factor of g(x)g(x).

  3. Use the condition that g(x)g(x) is a monic quadratic polynomial to set g(x)=1⋅(x−2)(x+2)g(x) = 1 \cdot (x - 2)(x + 2).

  4. Expand the product (x−2)(x+2)(x - 2)(x + 2) using the difference of squares identity.

Final answer

g(x)=x2−4g(x) = x^2 - 4

NEXT STEPS
Final Takeaways from Your Teacher
  • When given domain restrictions or discontinuities for a rational function, check the roots of the denominator first instead of dividing polynomials.

  • Remember that simplifying a quotient function removes common factors from view; direct division by the simplified form cannot recover them.

OverviewACEpath Teacher's Diagnosis

02 The student correctly identifies the linear factors (x - 2) and (x + 2) from the discontinuities, but makes a sign error when expanding the difference of squares, writing x² + 4 instead of x² - 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Removable discontinuity at x=2  ⟹  x=2 \implies factor is (x−2)(x-2); Excluded domain value at x=−2  ⟹  x=-2 \implies factor is (x+2)(x+2)

  2. Step 2

    g(x)g(x) is monic quadratic, so g(x)=(x−2)(x+2)g(x) = (x-2)(x+2)

  3. Step 3

    g(x)=x2−2x+2x+4g(x) = x^2 - 2x + 2x + 4

    Correct

    g(x)=x2+2x−2x−4g(x) = x^2 + 2x - 2x - 4

    When expanding the product of conjugates using FOIL, the product of the last terms is (−2)×(+2)=−4(-2) \times (+2) = -4, not +4+4.

  4. Step 4

    g(x)=x2+4g(x) = x^2 + 4

    Correct

    g(x)=x2−4g(x) = x^2 - 4

    This result follows directly from the sign mistake in the previous expansion step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that points of discontinuity and excluded values in a rational function arise from the roots of the denominator.

You translated the roots x=2x = 2 and x=−2x = -2 into the correct linear factors (x−2)(x - 2) and (x+2)(x + 2).

You correctly used the monic quadratic condition to write g(x)=(x−2)(x+2)g(x) = (x - 2)(x + 2).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in difference of squares expansion

You wrote +4+4 instead of −4-4 when multiplying the constant terms (−2)(-2) and (+2)(+2).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Lapse in tracking signs during binomial expansion, forgetting that (a−b)(a+b)=a2−b2(a - b)(a + b) = a^2 - b^2 always yields a negative constant term when the signs of the constants are opposite.

REASONING PATH
Your ACEpath teacher’s suggested approach
Difference of Squares Identity
  • (a−b)(a+b)=a2−b2(a - b)(a + b) = a^2 - b^2

  • Whenever you multiply conjugate binomials, immediately write the difference of the two squares rather than expanding by hand, ensuring the minus sign precedes the constant term.

Sign of Product of Constants
  • (negative\text{negative}) ×\times (positive\text{positive}) = negative\text{negative}

  • Check the last product explicitly: (−c)⋅(+c)=−c2(-c) \cdot (+c) = -c^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the difference of squares identity: (a−b)(a+b)=a2−b2(a - b)(a + b) = a^2 - b^2.

  2. Substitute a=xa = x and b=2b = 2: g(x)=x2−22g(x) = x^2 - 2^2.

  3. Evaluate the constant: g(x)=x2−4g(x) = x^2 - 4.

Final answer

g(x)=x2−4g(x) = x^2 - 4

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the difference of squares identity: (x−c)(x+c)=x2−c2(x - c)(x + c) = x^2 - c^2.

  • Practice multiplying conjugate binomials with careful attention to the final sign.

  • Verify your expansion by plugging in a test value, such as x=0x = 0, where (0−2)(0+2)=−4(0 - 2)(0 + 2) = -4.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the signs in the binomial factors from the given x-values, using (x + 2) for both conditions or negating the signs incorrectly, resulting in g(x) = x² + 4x + 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    x=2 gives factor (x+2)x = 2\text{ gives factor }(x + 2)   ⟹  \implies x=−2 gives factor (x+2)x = -2\text{ gives factor }(x + 2)   ⟹  \implies g(x)=(x+2)(x+2)g(x) = (x + 2)(x + 2)

    Correct

    x=2 gives factor (x−2)x = 2\text{ gives factor }(x - 2)   ⟹  \implies x=−2 gives factor (x+2)x = -2\text{ gives factor }(x + 2)   ⟹  \implies g(x)=(x−2)(x+2)g(x) = (x - 2)(x + 2)

    By the Factor Theorem, if a polynomial has a root at x=cx = c, its corresponding linear factor is (x−c)(x - c). Therefore, a zero at x=2x = 2 corresponds to (x−2)(x - 2), and a zero at x=−2x = -2 corresponds to (x−(−2))=(x+2)(x - (-2)) = (x + 2).

  2. Step 2

    g(x)=x2+2x+2x+4g(x) = x^2 + 2x + 2x + 4   ⟹  \implies g(x)=x2+4x+4g(x) = x^2 + 4x + 4

    Correct

    g(x)=x2−4g(x) = x^2 - 4

    You expanded your binomial product accurately, but the result was affected by the incorrect factor (x+2)(x + 2) used in place of (x−2)(x - 2).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that both the removable discontinuity and the excluded domain value correspond to roots of the denominator polynomial g(x)g(x).

You correctly expanded the product of your two linear factors into standard quadratic form.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in Factor Theorem conversion

Writing (x+2)(x + 2) as the factor for the root x=2x = 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the sign convention of the Factor Theorem, forgetting that a root at x=cx = c produces a factor of (x−c)(x - c), where the sign inside the binomial is opposite to the sign of the root.

REASONING PATH
Your ACEpath teacher’s suggested approach
Factor Theorem Sign Rule
  • A polynomial root at x=cx = c corresponds to the factor (x−c)(x - c), because substituting x=cx = c yields c−c=0c - c = 0.

  • Always check your factor by plugging the root back in: if the factor does not evaluate to 00 at that xx-value, flip the sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Expand the product of conjugates using the difference of squares identity (a−b)(a+b)=a2−b2(a - b)(a + b) = a^2 - b^2:

  2. g(x)=x2−22=x2−4g(x) = x^2 - 2^2 = x^2 - 4

Final answer

g(x)=x2−4g(x) = x^2 - 4

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Factor Theorem to solidify the relationship between roots x=cx = c and factors (x−c)(x - c).

  • Practice reconstructing quadratic denominators from rational function discontinuities.

Lock it in

Similar question

01

A rational function is given by R(x)=p(x)q(x)R(x) = \frac{p(x)}{q(x)}. The simplified form of R(x)R(x) is x−1x - 1, with a removable discontinuity at x=4x = 4 and an excluded domain value at x=−1x = -1. If q(x)q(x) is a monic quadratic polynomial, find q(x)q(x) in standard form.

Answer

q(x)=x2−3x−4q(x) = x^2 - 3x - 4. Both x=4x = 4 and x=−1x = -1 make the denominator zero, so q(x)q(x) has factors (x−4)(x - 4) and (x+1)(x + 1). Since q(x)q(x) is monic quadratic, q(x)=(x−4)(x+1)=x2−3x−4q(x) = (x - 4)(x + 1) = x^2 - 3x - 4.

02

Let h(x)=f(x)g(x)h(x) = \frac{f(x)}{g(x)}, where f(x)=x3−3x2−x+3f(x) = x^3 - 3x^2 - x + 3. The simplified form of h(x)h(x) is x−3x - 3, and h(x)h(x) has removable discontinuities at x=1x = 1 and x=−1x = -1. Reconstruct the polynomial g(x)g(x) in standard form assuming its leading coefficient is 22.

Answer

g(x)=2x2−2g(x) = 2x^2 - 2. The discontinuities at x=1x = 1 and x=−1x = -1 imply that (x−1)(x - 1) and (x+1)(x + 1) are factors of g(x)g(x). With a leading coefficient of 22, g(x)=2(x−1)(x+1)=2(x2−1)=2x2−2g(x) = 2(x - 1)(x + 1) = 2(x^2 - 1) = 2x^2 - 2.

03

A rational function Q(x)=f(x)g(x)Q(x) = \frac{f(x)}{g(x)} simplifies to 1x−3\frac{1}{x - 3} with a removable discontinuity at x=5x = 5 and a vertical asymptote at x=−2x = -2. If g(x)g(x) is a monic cubic polynomial, determine g(x)g(x) in standard form.

Answer

g(x)=x3−6x2−x+30g(x) = x^3 - 6x^2 - x + 30. The denominator g(x)g(x) must account for the hole at x=5x = 5 (factor x−5x - 5), the vertical asymptote at x=−2x = -2 (factor x+2x + 2), and the vertical asymptote appearing in the simplified quotient at x=3x = 3 (factor x−3x - 3). Thus, g(x)=(x−5)(x+2)(x−3)=(x2−3x−10)(x−3)=x3−6x2−x+30g(x) = (x - 5)(x + 2)(x - 3) = (x^2 - 3x - 10)(x - 3) = x^3 - 6x^2 - x + 30.

Loading workspace…