Resources

An industrial biochemical reactor produces an organic acid whose mass concentration y(t)y(t) is modeled by y(t)=ymax(1−e−βt)y(t) = y_{\text{max}}(1 - e^{-\beta t}). The limiting saturation concentration is ymax=14.5 g/Ly_{\text{max}} = 14.5\text{ g/L}, and the rate coefficient is given in non-standard units as β=4.80×10−4 min−1\beta = 4.80\times 10^{-4}\text{ min}^{-1}. A quality-control standard requires evaluating the yield after a reaction duration of t=36.0 hourst = 36.0\text{ hours}. Convert all time units consistently into minutes to estimate the yield y(36.0 h)y(36.0\text{ h}), and report the final answer in milligrams per milliliter (mg/mL\text{mg/mL}) rounded to two decimal places.

Answer and steps

Final answer

9.35 mg/mL9.35\text{ mg/mL}

Steps

01

Unify time units

To find the mass concentration y(36.0 h)y(36.0\text{ h}), we follow a three-step modeling workflow: unify units, evaluate the exponential growth model, and convert the output to the requested concentration units.

The rate constant β\beta is expressed in reciprocal minutes (min−1\text{min}^{-1}), while the reaction duration tt is given in hours. Convert tt into minutes: t=36.0 h×60 min/h=2160 mint = 36.0\text{ h} \times 60\text{ min/h} = 2160\text{ min}

02

Evaluate the exponential term and concentration

Compute the dimensionless exponent βt\beta t: βt=(4.80×10−4 min−1)×2160 min=1.0368\beta t = (4.80 \times 10^{-4}\text{ min}^{-1}) \times 2160\text{ min} = 1.0368

Substitute this into the saturating yield model: y(2160 min)=ymax(1−e−βt)=14.5⋅(1−e−1.0368)y(2160\text{ min}) = y_{\text{max}}(1 - e^{-\beta t}) = 14.5 \cdot (1 - e^{-1.0368})

Evaluating the exponential decay factor gives e−1.0368≈0.355e^{-1.0368} \approx 0.355, so: 1−e−1.0368≈1−0.355=0.6451 - e^{-1.0368} \approx 1 - 0.355 = 0.645

Multiplying by ymaxy_{\text{max}}: y=14.5⋅0.645=9.3525 g/Ly = 14.5 \cdot 0.645 = 9.3525\text{ g/L}

03

Convert units to mg/mL\text{mg/mL}

Convert g/L\text{g/L} to mg/mL\text{mg/mL} using standard metric relations (1 g=1000 mg1\text{ g} = 1000\text{ mg} and 1 L=1000 mL1\text{ L} = 1000\text{ mL}): 1 g/L=1000 mg1000 mL=1 mg/mL1\text{ g/L} = \frac{1000\text{ mg}}{1000\text{ mL}} = 1\text{ mg/mL}

Thus, the numerical value is identical: y(36.0 h)≈9.35 mg/mLy(36.0\text{ h}) \approx 9.35\text{ mg/mL}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the duration from hours to minutes, substituting t = 36.0 directly into the formula with β in min⁻¹.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=36.0  ⟹  −βt=−(4.80×10−4)(36.0)=−0.01728t = 36.0 \implies -\beta t = -(4.80 \times 10^{-4})(36.0) = -0.01728

    Correct

    t=36.0 h×60 min/h=2160 min  ⟹  −βt=−(4.80×10−4 min−1)(2160 min)=−1.0368t = 36.0\text{ h} \times 60\text{ min/h} = 2160\text{ min} \implies -\beta t = -(4.80 \times 10^{-4}\text{ min}^{-1})(2160\text{ min}) = -1.0368

    You substituted t=36.0 ht = 36.0\text{ h} directly without converting hours to minutes. Because the rate constant β\beta is given in min−1\text{min}^{-1}, the time tt must be expressed in minutes so that the product βt\beta t becomes properly dimensionless.

  2. Step 2

    y(36.0)=14.5(1−e−0.01728)  ⟹  y(36.0)=14.5(1−0.98287)=0.2484 g/Ly(36.0) = 14.5(1 - e^{-0.01728}) \implies y(36.0) = 14.5(1 - 0.98287) = 0.2484\text{ g/L}

    Correct

    y(2160 min)=14.5(1−e−1.0368)≈14.5(1−0.3546)=9.3525 g/Ly(2160\text{ min}) = 14.5(1 - e^{-1.0368}) \approx 14.5(1 - 0.3546) = 9.3525\text{ g/L}

    Your algebraic evaluation of ymax(1−e−βt)y_{\text{max}}(1 - e^{-\beta t}) was mathematically consistent with your exponent value, but the result was significantly lower than expected due to the uncoverted time unit.

  3. Step 3

    0.2484 g/L=0.25 mg/mL0.2484\text{ g/L} = 0.25\text{ mg/mL}

    Correct

    9.3525 g/L=9.35 mg/mL9.3525\text{ g/L} = 9.35\text{ mg/mL}

    You correctly recognized that 1 g/L=1 mg/mL1\text{ g/L} = 1\text{ mg/mL} and rounded your result to two decimal places, but your final number was affected by the initial time unit error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and structured the asymptotic saturation model y(t)=ymax(1−e−βt)y(t) = y_{\text{max}}(1 - e^{-\beta t}).

You correctly identified that 1 g/L1\text{ g/L} is equivalent to 1 mg/mL1\text{ mg/mL}.

You computed the exponential term and rounded your final figure to two decimal places accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch in exponential argument

You substituted the elapsed time in hours directly into an exponent containing a rate constant defined in reciprocal minutes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking dimensional consistency inside transcendental arguments. Transcendental functions like eue^u require the argument uu to be strictly dimensionless, so reciprocal units (such as min−1\text{min}^{-1}) must cancel with the identical base unit (minutes, not hours).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensionless Exponent Check
  • The exponent in any physical model e−βte^{-\beta t} must be dimensionless: [extunitofβ]×[unit of t]=1[ ext{unit of } \beta] \times [\text{unit of } t] = 1.

  • Always write out the units explicitly in the exponent product, such as (min−1)×(min)(\text{min}^{-1}) \times (\text{min}), to verify they cancel completely before computing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the duration from hours to minutes: t=36.0 h×60 min/h=2160 mint = 36.0\text{ h} \times 60\text{ min/h} = 2160\text{ min}.

  2. Compute the dimensionless product: βt=(4.80×10−4 min−1)×2160 min=1.0368\beta t = (4.80 \times 10^{-4}\text{ min}^{-1}) \times 2160\text{ min} = 1.0368.

  3. Substitute into the model: y(2160 min)=14.5(1−e−1.0368)≈14.5(1−0.35459)≈9.3525 g/Ly(2160\text{ min}) = 14.5(1 - e^{-1.0368}) \approx 14.5(1 - 0.35459) \approx 9.3525\text{ g/L}.

  4. Convert concentration units: 9.3525 g/L=9.3525 mg/mL≈9.35 mg/mL9.3525\text{ g/L} = 9.3525\text{ mg/mL} \approx 9.35\text{ mg/mL}.

Final answer

9.35 mg/mL9.35\text{ mg/mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before plugging values into any exponential formula, inspect the units of the rate constant and the time variable side by side.

  • Practice converting mixed time units (hours to minutes or seconds) as an explicit preliminary step before executing numerical calculations.

OverviewACEpath Teacher's Diagnosis

02 The student misconverts g/L to mg/mL by multiplying by 1000 instead of recognizing that 1 g/L equals 1 mg/mL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    t=36.0×60=2160 mint = 36.0 \times 60 = 2160\text{ min}

  2. Step 2

    −βt=−(4.80×10−4)(2160)=−1.0368  ⟹  y(2160)=14.5(1−e−1.0368)=9.3585 g/L-\beta t = -(4.80 \times 10^{-4})(2160) = -1.0368 \implies y(2160) = 14.5(1 - e^{-1.0368}) = 9.3585\text{ g/L}

  3. Step 3

    1 g/L=1000 mg/mL1\text{ g/L} = 1000\text{ mg/mL}

    Correct

    1 g/L=1000 mg1000 mL=1 mg/mL1\text{ g/L} = \frac{1000\text{ mg}}{1000\text{ mL}} = 1\text{ mg/mL}

    You converted the mass in the numerator (1 g=1000 mg1\text{ g} = 1000\text{ mg}) but forgot to convert the volume in the denominator (1 L=1000 mL1\text{ L} = 1000\text{ mL}).

  4. Step 4

    y=9.3585×1000=9358.50 mg/mLy = 9.3585 \times 1000 = 9358.50\text{ mg/mL}

    Correct

    y≈9.35 mg/mLy \approx 9.35\text{ mg/mL}

    Because of the incorrect conversion factor in the previous step, your final numerical value is off by a factor of 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You unified the time units by converting hours to minutes before computing the exponent.

You accurately calculated the exponent product βt\beta t and evaluated the exponential saturation formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Compound unit conversion oversight

You remembered that there are 1000 mg1000\text{ mg} in a gram, but treated the denominator volume unit as unchanged.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete compound unit conversion where the numerator conversion factor (1000 mg/g1000\text{ mg/g}) is applied without accounting for the reciprocal denominator conversion factor (1000 mL/L1000\text{ mL/L}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Ratio Method for Compound Units
  • For a compound unit AB\frac{A}{B}, convert both numerator and denominator explicitly: 1 g1 L=1000 mg1000 mL=1 mg/mL\frac{1\text{ g}}{1\text{ L}} = \frac{1000\text{ mg}}{1000\text{ mL}} = 1\text{ mg/mL}.

  • Write out both conversion factors as fractions with matching units canceling out before performing multiplication.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that 1 g=1000 mg1\text{ g} = 1000\text{ mg} and 1 L=1000 mL1\text{ L} = 1000\text{ mL}.

  2. Set up the dimensional ratio: 1 g1 L×1000 mg1 g×1 L1000 mL=1 mg/mL\frac{1\text{ g}}{1\text{ L}} \times \frac{1000\text{ mg}}{1\text{ g}} \times \frac{1\text{ L}}{1000\text{ mL}} = 1\text{ mg/mL}.

  3. Multiply the concentration: 9.3585 g/L×1 (mg/mL)/(g/L)≈9.35 mg/mL9.3585\text{ g/L} \times 1\text{ (mg/mL)/(g/L)} \approx 9.35\text{ mg/mL}.

Final answer

9.35 mg/mL9.35\text{ mg/mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting compound metric units by writing out both numerator and denominator conversions separately.

  • Double-check that physical quantities have realistic magnitudes when scaling between metric prefixes.

OverviewACEpath Teacher's Diagnosis

03 The student divides the time in hours by 60 instead of multiplying by 60 to convert hours to minutes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=36.060=0.60 mint = \frac{36.0}{60} = 0.60\text{ min}

    Correct

    t=36.0 h×60 min/h=2160 mint = 36.0\text{ h} \times 60\text{ min/h} = 2160\text{ min}

    Because 1 hour=60 minutes1\text{ hour} = 60\text{ minutes}, converting hours to minutes requires multiplying by 6060, not dividing.

  2. Step 2

    −βt=−(4.80×10−4)(0.60)=−0.000288  ⟹  y=14.5(1−e−0.000288)=14.5(0.000288)=0.00418 g/L-\beta t = -(4.80\times 10^{-4})(0.60) = -0.000288 \implies y = 14.5(1 - e^{-0.000288}) = 14.5(0.000288) = 0.00418\text{ g/L}

    Correct

    −βt=−(4.80×10−4 min−1)(2160 min)=−1.0368  ⟹  y=14.5(1−e−1.0368)≈9.3525 g/L-\beta t = -(4.80\times 10^{-4}\text{ min}^{-1})(2160\text{ min}) = -1.0368 \implies y = 14.5(1 - e^{-1.0368}) \approx 9.3525\text{ g/L}

    You substituted your value of tt into the exponential formula correctly, but the result was skewed by the earlier time conversion error.

  3. Step 3

    y=0.00 mg/mLy = 0.00\text{ mg/mL}

    Correct

    y(36.0 h)≈9.35 mg/mLy(36.0\text{ h}) \approx 9.35\text{ mg/mL}

    Your final conversion and rounding followed directly from your computed concentration, but the value is incorrect due to the propagated error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the given parameters and matched them to the exponential model y(t)=ymax(1−e−βt)y(t) = y_{\text{max}}(1 - e^{-\beta t}).

You handled the metric concentration equivalence 1 g/L=1 mg/mL1\text{ g/L} = 1\text{ mg/mL} accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Time Unit Conversion

You divided 36.036.0 by 6060 instead of multiplying 36.036.0 by 6060 when converting from hours to minutes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the direction of unit conversion: moving from a larger unit (hours) to a smaller unit (minutes) requires multiplying by the conversion factor so that the numerical value increases.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Always write units explicitly as conversion fractions: hours×60 min1 h=minutes\text{hours} \times \frac{60\text{ min}}{1\text{ h}} = \text{minutes}.

  • Cancel out the matching unit in the denominator to confirm that the desired target unit remains in the numerator.

Magnitude Sense Check
  • A duration measured in smaller units must always have a larger numerical value than when measured in larger units.

  • Check whether 36 hours36\text{ hours} should yield more than 3636 minutes; since 0.60<360.60 < 36, the operation must be multiplication.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert t=36.0 ht = 36.0\text{ h} to minutes: t=36.0×60=2160 mint = 36.0 \times 60 = 2160\text{ min}.

  2. Evaluate the dimensionless exponent: βt=(4.80×10−4 min−1)(2160 min)=1.0368\beta t = (4.80\times 10^{-4}\text{ min}^{-1})(2160\text{ min}) = 1.0368.

  3. Calculate the saturation factor: 1−e−1.0368≈1−0.3546=0.64541 - e^{-1.0368} \approx 1 - 0.3546 = 0.6454.

  4. Compute the yield concentration: y=14.5×0.6454≈9.358 g/Ly = 14.5 \times 0.6454 \approx 9.358\text{ g/L}.

  5. Convert g/L\text{g/L} to mg/mL\text{mg/mL} and round to two decimal places: 9.35 mg/mL9.35\text{ mg/mL}.

Final answer

9.35 mg/mL9.35\text{ mg/mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up unit conversions as explicit fractions so units cancel visibly.

  • Run a quick magnitude check on converted numbers before substituting them into exponential models.

Lock it in

Similar question

01

A chemical contaminant degrades in groundwater according to C(t)=C0e−ktC(t) = C_0 e^{-kt}, with initial concentration C0=50.0 mg/LC_0 = 50.0\text{ mg/L} and decay coefficient k=1.25×10−2 day−1k = 1.25 \times 10^{-2}\text{ day}^{-1}. Calculate the concentration remaining after t=96.0 hourst = 96.0\text{ hours}.

Answer

47.56 mg/L47.56\text{ mg/L}. First, convert time to days: t=96.0 h/24 h/day=4.0 dayst = 96.0\text{ h} / 24\text{ h/day} = 4.0\text{ days}. Compute the exponent: kt=(1.25×10−2 day−1)(4.0 days)=0.050kt = (1.25 \times 10^{-2}\text{ day}^{-1})(4.0\text{ days}) = 0.050. Then evaluate C(4 days)=50.0×e−0.050≈50.0×0.95123=47.56 mg/LC(4\text{ days}) = 50.0 \times e^{-0.050} \approx 50.0 \times 0.95123 = 47.56\text{ mg/L}.

02

A microbial population grows toward a carrying capacity according to P(t)=12001+5e−rtP(t) = \frac{1200}{1 + 5 e^{-rt}}, where r=0.080 h−1r = 0.080\text{ h}^{-1}. Determine the population size after a duration of t=1.25 dayst = 1.25\text{ days}, rounded to the nearest integer.

Answer

10981098. Convert elapsed time to hours: t=1.25 days×24 h/day=30.0 hourst = 1.25\text{ days} \times 24\text{ h/day} = 30.0\text{ hours}. Compute the exponent: rt=(0.080 h−1)(30.0 h)=2.40rt = (0.080\text{ h}^{-1})(30.0\text{ h}) = 2.40. Substitute into the logistic model: P=12001+5e−2.40≈12001+5(0.09072)=12001+0.4536=12001.4536≈1098P = \frac{1200}{1 + 5e^{-2.40}} \approx \frac{1200}{1 + 5(0.09072)} = \frac{1200}{1 + 0.4536} = \frac{1200}{1.4536} \approx 1098.

03

A drug concentration in the bloodstream follows C(t)=C0e−αtC(t) = C_0 e^{-\alpha t}, where α=3.50×10−4 s−1\alpha = 3.50 \times 10^{-4}\text{ s}^{-1}. An initial dose yields C0=8.00 mg/dLC_0 = 8.00\text{ mg/dL}. Find the concentration after t=2.50 hourst = 2.50\text{ hours}, and report the result in μg/mL\mu\text{g/mL} rounded to one decimal place.

Answer

3.4 μg/mL3.4\,\mu\text{g/mL}. Convert time to seconds: t=2.50 h×3600 s/h=9000 st = 2.50\text{ h} \times 3600\text{ s/h} = 9000\text{ s}. Compute the exponent: αt=(3.50×10−4 s−1)(9000 s)=3.15\alpha t = (3.50 \times 10^{-4}\text{ s}^{-1})(9000\text{ s}) = 3.15. Evaluate concentration: C=8.00e−3.15≈8.00×0.04285=0.3428 mg/dLC = 8.00 e^{-3.15} \approx 8.00 \times 0.04285 = 0.3428\text{ mg/dL}. Finally, convert units: 1 mg/dL=10 μg/mL1\text{ mg/dL} = 10\,\mu\text{g/mL}, so 0.3428 mg/dL=3.428 μg/mL≈3.4 μg/mL0.3428\text{ mg/dL} = 3.428\,\mu\text{g/mL} \approx 3.4\,\mu\text{g/mL}.

Loading workspace…