Resources

A manufacturing plant monitors assembly line speed xx (in units per hour) and defect rate yy (defects per 1,000 units). For a specific observation, the plant operated at an assembly speed of x=45x = 45 units per hour with a measured residual of e=−3.20e = -3.20 defects per 1,000 units. The least-squares regression equation for the dataset is y^=1.40+0.36x\hat{y} = 1.40 + 0.36x. Determine the actual observed defect rate yy for this production run.

Answer and steps

Final answer

y=14.4y = 14.4 defects per 1,000 units

Steps

01

Calculate the predicted defect rate (y^\hat{y})

To find the actual observed defect rate yy, we follow a two-step process using the linear regression model and the definition of a residual.

Substitute the given assembly line speed x=45 units per hourx = 45\text{ units per hour} into the regression equation:

y^=1.40+0.36x\hat{y} = 1.40 + 0.36x

y^=1.40+0.36(45)\hat{y} = 1.40 + 0.36(45)

y^=1.40+16.20=17.60 defects per 1,000 units\hat{y} = 1.40 + 16.20 = 17.60\text{ defects per 1,000 units}

02

Use the residual to find the actual value (yy)

By definition, a residual ee is the difference between the actual observed value (yy) and the predicted value (y^\hat{y}):

e=y−y^e = y - \hat{y}

Rearranging to solve for the actual value yy:

y=y^+ey = \hat{y} + e

Substitute the predicted value y^=17.60\hat{y} = 17.60 and the given residual e=−3.20e = -3.20:

y=17.60+(−3.20)y = 17.60 + (-3.20)

y=14.4 defects per 1,000 unitsy = 14.4\text{ defects per 1,000 units}

Common Pitfall: Remember that residual is always calculated as Actual−Predicted\text{Actual} - \text{Predicted} (y−y^y - \hat{y}), not predicted minus actual. A negative residual indicates that the actual observed value lies below the regression line.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the residual formula as e = ŷ - y, subtracting the residual from the predicted value instead of adding it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y^=1.40+0.36(45)  ⟹  y^=1.40+16.20=17.60\hat{y} = 1.40 + 0.36(45) \implies \hat{y} = 1.40 + 16.20 = 17.60

  2. Step 2

    e=y^−y  ⟹  −3.20=17.60−ye = \hat{y} - y \implies -3.20 = 17.60 - y

    Correct

    e=y−y^  ⟹  −3.20=y−17.60e = y - \hat{y} \implies -3.20 = y - 17.60

    A residual is always defined as observed minus predicted, e=y−y^e = y - \hat{y}, not predicted minus observed.

  3. Step 3

    y=17.60−(−3.20)=20.80y = 17.60 - (-3.20) = 20.80

    Correct

    y=17.60+(−3.20)=14.40y = 17.60 + (-3.20) = 14.40

    This calculation followed algebraically from your reversed residual formula, but the correct relation gives y=y^+e=14.40y = \hat{y} + e = 14.40.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the linear regression model at x=45x = 45 to get y^=17.60\hat{y} = 17.60.

You correctly set up an equation involving the residual, predicted value, and actual value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed residual formula

Subtracting the actual value from the predicted value rather than subtracting predicted from actual.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of subtraction in the definition of a residual (e=y−y^e = y - \hat{y}). Remember the alphabetical mnemonic 'AP' (Actual minus Predicted).

REASONING PATH
Your ACEpath teacher’s suggested approach
Residual Definition
  • Residual=Actual−Predicted=y−y^\text{Residual} = \text{Actual} - \text{Predicted} = y - \hat{y}

  • Check that y=y^+ey = \hat{y} + e. A negative residual means the actual point lies below the line.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of residual: e=y−y^e = y - \hat{y}

  2. Rearrange to solve for actual value: y=y^+ey = \hat{y} + e

  3. Substitute y^=17.60\hat{y} = 17.60 and e=−3.20e = -3.20: y=17.60+(−3.20)=14.40y = 17.60 + (-3.20) = 14.40

Final answer

y=14.40 defects per 1,000 unitsy = 14.40\text{ defects per 1,000 units}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the residual formula using the memory aid 'Actual minus Predicted' (y−y^y - \hat{y}).

  • Check the sign of the residual: since e=−3.20e = -3.20 is negative, the actual value must be smaller than the predicted value of 17.6017.60.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the signed residual with its absolute value and subtracts the magnitude because the residual has a minus sign, or treats the negative sign as an operation to subtract again, calculating y = 17.60 - 3.20 = 14.40 via inconsistent algebra, or ignores the negative sign entirely assuming y = ŷ - e.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y^=1.40+0.36(45)=17.60\hat{y} = 1.40 + 0.36(45) = 17.60

  2. Step 2

    y=y^+ey = \hat{y} + e

  3. Step 3

    y=17.60+3.20=20.80y = 17.60 + 3.20 = 20.80

    Correct

    y=17.60+(−3.20)=14.40y = 17.60 + (-3.20) = 14.40

    The given residual is negative (e=−3.20e = -3.20), but you substituted positive 3.203.20. Adding −3.20-3.20 gives y=17.60−3.20=14.40y = 17.60 - 3.20 = 14.40 defects per 1,000 units.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the linear regression line at x=45x = 45.

You correctly stated the relationship between actual value, predicted value, and residual as y=y^+ey = \hat{y} + e.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in residual substitution

You dropped the negative sign on e=−3.20e = -3.20 when substituting it into y=y^+ey = \hat{y} + e.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the residual as an unsigned distance rather than a signed deviation, which causes an underestimation or overestimation to be applied in the wrong direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Residual sign check
  • A negative residual (e<0e < 0) means the observed point lies below the prediction line, so y<y^y < \hat{y}.

  • Always keep the sign of ee when evaluating y=y^+ey = \hat{y} + e. If ee is negative, your actual value yy must be smaller than y^\hat{y}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute y^=17.60\hat{y} = 17.60 and e=−3.20e = -3.20 into y=y^+ey = \hat{y} + e.

  2. y=17.60+(−3.20)=17.60−3.20y = 17.60 + (-3.20) = 17.60 - 3.20

  3. y=14.40y = 14.40

Final answer

y=14.4 defects per 1,000 unitsy = 14.4\text{ defects per 1,000 units}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the sign of the residual matches the problem statement when substituting.

  • Use a quick geometric check: a negative residual always means the actual point is below the regression line (y<y^y < \hat{y}).

OverviewACEpath Teacher's Diagnosis

03 The student confuses the observed value y with the residual e and sets the regression equation equal to the residual value instead of evaluating at x.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y^\hat{y} = 1.40 + 0.36x   ⟹  \implies -3.20 = 1.40 + 0.36x   ⟹  \implies -4.60 = 0.36x   ⟹  \implies x = -12.78

    Correct

    y^\hat{y} = 1.40 + 0.36(45) = 17.60

    You substituted the residual e=−3.20e = -3.20 for y^\hat{y} and solved for xx, but x=45x = 45 is given and y^\hat{y} represents the predicted value on the line.

  2. Step 2

    y = -12.78

    Correct

    y = y^\hat{y} + e = 17.60 + (-3.20) = 14.4

    Because the predicted value was not calculated, you equated yy to your solved xx value rather than adding the residual to the predicted value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote down the given least-squares regression equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Residual Definition Confused with Model Output

You treated the residual value e=−3.20e = -3.20 as if it were the predicted value y^\hat{y} in the regression model.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A residual ee is not a point on the regression line; it is the directed vertical distance between the actual observed point and the line (e=y−y^e = y - \hat{y}). To find an observed value yy, first calculate the predicted value y^\hat{y} at the given xx, then solve y=y^+ey = \hat{y} + e.

REASONING PATH
Your ACEpath teacher’s suggested approach
Residual Meaning
  • e=Actual y−Predicted y^e = \text{Actual } y - \text{Predicted } \hat{y}

  • Always evaluate y^=b0+b1x\hat{y} = b_0 + b_1 x first, then use y=y^+ey = \hat{y} + e.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the predicted defect rate at x=45x = 45: y^=1.40+0.36(45)=1.40+16.20=17.60\hat{y} = 1.40 + 0.36(45) = 1.40 + 16.20 = 17.60.

  2. Apply the residual definition e=y−y^e = y - \hat{y} rearranged for yy: y=y^+ey = \hat{y} + e.

  3. Substitute y^=17.60\hat{y} = 17.60 and e=−3.20e = -3.20: y=17.60+(−3.20)=14.4y = 17.60 + (-3.20) = 14.4.

Final answer

y=14.4y = 14.4 defects per 1,000 units

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the residual formula using the mnemonic AP: Residual=Actual−Predicted\text{Residual} = \text{Actual} - \text{Predicted} (e=y−y^e = y - \hat{y}).

  • Practice identifying whether a given number is an independent variable (xx), observed value (yy), predicted value (y^\hat{y}), or residual (ee) before writing equations.

Lock it in

Similar question

01

A linear model predicts a student's exam score based on study hours as y^=42+6.5x\hat{y} = 42 + 6.5x. A student who studied for x=6x = 6 hours had a residual of e=3.5e = 3.5. What was the student's actual exam score?

Answer

y=84.5y = 84.5. Key steps: Calculate y^=42+6.5(6)=81\hat{y} = 42 + 6.5(6) = 81. Using y=y^+ey = \hat{y} + e, we get y=81+3.5=84.5y = 81 + 3.5 = 84.5.

02

The fuel efficiency of a vehicle is modeled by y^=38−0.004x\hat{y} = 38 - 0.004x, where xx is vehicle weight in pounds and yy is miles per gallon. For a vehicle weighing 3,5003,500 pounds, the actual fuel efficiency was 21.8 mpg21.8\text{ mpg}. What is the residual for this observation?

Answer

e=−2.2 mpge = -2.2\text{ mpg}. Key steps: Predicted value y^=38−0.004(3500)=24.0\hat{y} = 38 - 0.004(3500) = 24.0. Residual e=y−y^=21.8−24.0=−2.2e = y - \hat{y} = 21.8 - 24.0 = -2.2.

03

In a biology experiment, enzyme reaction rate yy is modeled against temperature xx by y^=−5.2+1.8x\hat{y} = -5.2 + 1.8x. At temperature x=30x = 30, an observation produced an actual rate y=44.0y = 44.0. Did the model overestimate or underestimate the reaction rate, and by how much?

Answer

The model overestimated the reaction rate by 4.84.8 units (residual e=−4.8e = -4.8). Key steps: y^=−5.2+1.8(30)=48.8\hat{y} = -5.2 + 1.8(30) = 48.8. Residual e=y−y^=44.0−48.8=−4.8e = y - \hat{y} = 44.0 - 48.8 = -4.8. A negative residual indicates the predicted value was higher than the actual observation.

Loading workspace…