Resources
An environmental monitoring station tracks a decaying radioactive isotope tracer governed by the model , where is the elapsed time in days. A laboratory snapshot taken on day records an activity of exactly . Independent decay measurements establish the decay constant as . Reverse-engineer the system to determine the initial tracer activity at . Round your answer to the nearest tenth of a Becquerel ().
Answer and steps
Final answer
Steps
Identify the given quantities in the model
The radioactive decay follows the exponential model:
From the problem statement, we have:
- Elapsed time:
- Activity at time :
- Decay constant:
- Initial activity: (unknown)
Rearrange the model to isolate
To find the initial activity at , divide both sides of the equation by (or equivalently, multiply by using exponent rules):
Compute the exponent
Calculate the product :
Note: The value is very close to , which indicates that represents approximately one half-life of this isotope.
Calculate and round to the nearest tenth
Substitute the values into the rearranged formula:
Evaluating the exponential factor:
Now, multiply by the measured activity:
Rounding to the nearest tenth of a Becquerel yields:
Common Pitfall
A frequent mistake when solving for an initial value is mistakenly keeping the negative sign in the exponent, computing instead of . Since the substance decays over time, the initial activity at must be larger than the activity measured at a later time .
Typical errors
01 The student confuses decay with exponential growth by using a positive exponent in the formula, calculating A₀ = 145.0 / e^(0.693) ≈ 72.5 Bq instead of dividing by e^(-0.693).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used a positive exponent in the exponential model, which represents exponential growth rather than radioactive decay.
- Step 2Correct
You correctly calculated the product , but the missing negative sign in the exponent propagated from Step 1.
- Step 3Correct
Your algebraic isolation of is valid for your written equation, but it carries forward the incorrect positive exponent.
- Step 4Correct
Because of the missing negative sign, your final answer ended up halved rather than doubled.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the given numerical values for , , and .
You accurately evaluated the exponent product .
You applied sound algebraic technique to isolate the variable .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the negative sign in the exponent of the decay formula given in the problem statement.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the decay process using the growth formula instead of the decay formula , missing the physical sanity check that initial activity at must be larger than later activity in a decaying system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Decay vs. Growth Exponent Rule
For radioactive decay with positive constant , the model is , which ensures for .
Always copy the exact formula given in the prompt, verifying that decaying quantities feature a negative sign in the exponential power.
- Physical Reasonableness Check
In a decay model, going backward in time to must yield an initial amount greater than the observed future amount.
Before finalizing, check whether ; if your computed initial value is smaller than the measured value, check for an exponent sign flip.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the correct radioactive decay model: .
Substitute the given data: .
Isolate by dividing by (or multiplying by ): .
Calculate the numerical value: .
02 The student incorrectly multiplies the measured activity by e^(-λt) instead of dividing by it to solve for the initial activity A₀, obtaining 72.5 Bq.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To isolate from , you need to divide both sides by , which is equivalent to multiplying by . Multiplying by instead decreased the value rather than restoring the initial quantity.
- Step 3Correct
You correctly carried out the arithmetic for your expression, but because the formula was rearranged with the wrong sign in the exponent, the resulting final activity is half the measured activity instead of double.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the parameters from the problem statement and substituted them into the decay model.
You accurately calculated the product of the decay constant and elapsed time, .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing division by an exponential term with multiplication by when isolating the initial coefficient , overlooking that .
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate Coefficients by Inverting Operations
If , then .
Whenever you solve backward for an initial quantity from an exponential equation, divide by the exponential factor and change the sign of the exponent.
- Physical Sanity Check for Decay
In any decaying process ( with ), the quantity decreases over time, meaning for all .
Compare your computed initial value against the given snapshot: if in a decay problem, check whether you accidentally decayed the snapshot further instead of reversing time.
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide both sides of by :
Evaluate the positive exponential factor:
Multiply:
Round to the nearest tenth of a Becquerel:
03 The student misplaces the decimal point when substituting the decay constant by writing λ = 0.385 instead of 0.0385, leading to an incorrect exponent and an initial activity of approximately 149457.9 Bq.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You transcribed the decay constant as instead of the given value , which resulted in an exponent of rather than .
- Step 2Correct
Your algebraic rearrangement and application of the negative exponent rule were completely correct, but the expression carries forward the erroneous exponent from Step 1.
- Step 3Correct
Evaluating gives approximately , which rounds to .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly chose the radioactive decay model .
You correctly manipulated the negative exponent when solving for by writing .
You correctly recognized that the initial activity must be greater than the later measured activity .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , dropping the leading zero after the decimal point.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisA decimal transcription error when substituting given model coefficients magnified the decay exponent by a factor of 10, preventing a realistic physical sanity check where corresponds to just one half-life ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Transcribe Decimals with Care
Always double-check zero-placeholders immediately following the decimal point when recording rate constants (e.g., vs. ).
Re-read the original coefficient from the problem statement and confirm that the count of leading zeros matches before calculating.
- Order-of-Magnitude Sanity Check
For a decay process, check the half-life . Over one half-life, activity should only double when looking back to .
Notice that , meaning must be approximately , not over .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the correct decay constant into the model: .
Compute the exponent: .
Isolate : .
Evaluate numerically: .
Lock it in
In the model with , how are and related when solving for the initial value at ?
. Since the quantity decays over time, the initial amount must always be strictly greater than for any .
Similar question
A medical radioactive tracer decays according to , where . At , the remaining amount is . Find the initial dose rounded to the nearest whole milligram.
Answer
. Key steps: Compute exponent product . Rearrange model: .
An archaeologist measures of Carbon-14 in an organic artifact. Carbon-14 decay follows with . If the artifact is old, determine its initial mass rounded to the nearest tenth of a gram.
Answer
. Key steps: Calculate . Solve for initial mass: .
A substance follows the cooling law in an ambient room at . After , the temperature is , with cooling rate constant . Determine the initial temperature rounded to the nearest degree Celsius.
Answer
. Key steps: Difference at is . Exponent product: . Initial temperature difference: . Thus .