Resources

In an analytical chemistry laboratory, two buffer mixtures of acetic acid (xx) and sodium acetate (yy) are prepared. The concentrations and flow rates yield the following balance equations in non-standard units: {250 mmol/L⋅x+400 mmol/L⋅y=1.80 mol/L1.25 mol/L⋅x+2.00 mol/L⋅y=9.00 mol/L\begin{cases} 250\text{ mmol/L} \cdot x + 400\text{ mmol/L} \cdot y = 1.80\text{ mol/L} \\ 1.25\text{ mol/L} \cdot x + 2.00\text{ mol/L} \cdot y = 9.00\text{ mol/L} \end{cases}. Convert all quantities to consistent SI molarity units (mol/L\text{mol/L}) and determine whether the system has one solution, no solution, or infinitely many solutions.

Answer and steps

Final answer

Infinitely many solutions. In consistent molarity units, the system becomes {0.25x+0.40y=1.801.25x+2.00y=9.00\begin{cases} 0.25x + 0.40y = 1.80 \\ 1.25x + 2.00y = 9.00 \end{cases}, where the second equation is exactly 55 times the first.

Steps

To determine the number of solutions, first convert all coefficients and constants into consistent molarity units of mol/L\text{mol/L}.

Step 1: Convert units to mol/L\text{mol/L}

Recall that 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}, so dividing a value in mmol/L\text{mmol/L} by 10001000 gives its equivalent in mol/L\text{mol/L}:

  • 250 mmol/L=2501000 mol/L=0.25 mol/L250\text{ mmol/L} = \frac{250}{1000}\text{ mol/L} = 0.25\text{ mol/L}
  • 400 mmol/L=4001000 mol/L=0.40 mol/L400\text{ mmol/L} = \frac{400}{1000}\text{ mol/L} = 0.40\text{ mol/L}

Now, write the system in consistent units: {0.25x+0.40y=1.80,1.25x+2.00y=9.00\lbrace 0.25x + 0.40y = 1.80,\quad 1.25x + 2.00y = 9.00

Step 2: Compare the two linear equations

Check the proportionality of the coefficients for xx, yy, and the constant terms:

  • Ratio of xx-coefficients: 1.250.25=5\frac{1.25}{0.25} = 5
  • Ratio of yy-coefficients: 2.000.40=5\frac{2.00}{0.40} = 5
  • Ratio of constants: 9.001.80=5\frac{9.00}{1.80} = 5

Multiplying the entire first equation by 55: 5⋅(0.25x+0.40y)=5⋅1.805 \cdot (0.25x + 0.40y) = 5 \cdot 1.80 1.25x+2.00y=9.001.25x + 2.00y = 9.00

Step 3: Interpret the result

Because the second equation is an exact non-zero scalar multiple (55 times) of the first equation, both equations represent the identical straight line in the coordinate plane.

A linear system whose equations represent the exact same line is dependent and consistent, meaning the system has infinitely many solutions.

Common Pitfall: Be careful not to compare coefficients directly before converting all quantities to the same units. Looking at 250250 and 1.251.25 without unit conversion makes the equations appear inconsistent or independent, leading to an incorrect conclusion.

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the unit difference between mmol/L and mol/L, treating mmol/L directly as mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    250x+400y=1.80  ⟹  1.25x+2.00y=9.00250x + 400y = 1.80 \implies 1.25x + 2.00y = 9.00

    Correct

    {0.25x+0.40y=1.80,1.25x+2.00y=9.00\lbrace 0.25x + 0.40y = 1.80,\quad 1.25x + 2.00y = 9.00

    You set up the equations using raw numerical values without converting 250 mmol/L250\text{ mmol/L} and 400 mmol/L400\text{ mmol/L} into consistent units of mol/L\text{mol/L}. Because 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}, the first equation should be 0.25x+0.40y=1.800.25x + 0.40y = 1.80.

  2. Step 2

    250/1.25=200  ⟹  400/2.00=200  ⟹  1.80/9.00=0.2250 / 1.25 = 200 \implies 400 / 2.00 = 200 \implies 1.80 / 9.00 = 0.2

    Correct

    1.250.25=5,2.000.40=5,9.001.80=5\frac{1.25}{0.25} = 5,\quad \frac{2.00}{0.40} = 5,\quad \frac{9.00}{1.80} = 5

    Your arithmetic was accurate for the numbers you wrote, but comparing the unconverted values produced artificial ratios of 200200 and 0.20.2 instead of the true common ratio of 55.

  3. Step 3

    The coefficients are proportional with ratio 200, but the constants have ratio 0.2. The system has no solution.

    Correct

    Since the ratios of all coefficients and constant terms are identical (1.250.25=2.000.40=9.001.80=5\frac{1.25}{0.25} = \frac{2.00}{0.40} = \frac{9.00}{1.80} = 5), the equations represent the exact same line. The system has infinitely many solutions.

    Your conclusion followed logically from your mismatched ratios, but with the correct unit conversion all three ratios are equal to 55, meaning the system is dependent and has infinitely many solutions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that comparing the ratios of corresponding coefficients and constant terms determines whether a linear system has one, none, or infinitely many solutions.

You performed the division calculations accurately without arithmetic mistakes.

You correctly reasoned that if the coefficient ratios match each other but do not match the constant ratio, the resulting system represents distinct parallel lines with no solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Unit Conversion in Applied Linear Systems

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the non-standard concentration prefix (mmol/L\text{mmol/L}) as identical to standard molarity (mol/L\text{mol/L}), bypassing unit homogenization before performing algebraic analysis on the coefficients.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • Before extracting coefficients from an applied physical model, ensure all corresponding terms share the exact same measurement units.

  • Scan all coefficients and constants for metric prefixes (such as milli- or kilo-) and divide by 10001000 to convert mmol/L\text{mmol/L} to mol/L\text{mol/L} before writing down the linear system.

Ratio Classification Rule
  • For a system {a1x+b1y=c1,a2x+b2y=c2\lbrace a_1x + b_1y = c_1,\quad a_2x + b_2y = c_2, if a2a1=b2b1=c2c1=k\frac{a_2}{a_1} = \frac{b_2}{b_1} = \frac{c_2}{c_1} = k, both equations represent the exact same line.

  • Verify that all three ratios—including the constants—are identical; when they are, conclude that the system has infinitely many solutions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the millimolar coefficients into standard molarity: 250 mmol/L=2501000=0.25 mol/L250\text{ mmol/L} = \frac{250}{1000} = 0.25\text{ mol/L}, and 400 mmol/L=4001000=0.40 mol/L400\text{ mmol/L} = \frac{400}{1000} = 0.40\text{ mol/L}.

  2. Rewrite the system in consistent molarity units: {0.25x+0.40y=1.80,1.25x+2.00y=9.00\lbrace 0.25x + 0.40y = 1.80,\quad 1.25x + 2.00y = 9.00.

  3. Calculate the scalar factor between the second and first equation: 1.250.25=5\frac{1.25}{0.25} = 5, 2.000.40=5\frac{2.00}{0.40} = 5, and 9.001.80=5\frac{9.00}{1.80} = 5.

  4. Observe that multiplying the first equation by 55 gives 5(0.25x+0.40y)=5(1.80)  ⟹  1.25x+2.00y=9.005(0.25x + 0.40y) = 5(1.80) \implies 1.25x + 2.00y = 9.00, which is identical to the second equation.

Final answer

Infinitely many solutions

NEXT STEPS
Final Takeaways from Your Teacher
  • Circle units in applied word problems during the first reading to flag any prefix differences such as mmol\text{mmol} versus mol\text{mol}.

  • Practice converting all quantities to base SI units before setting up linear equations and matrices.

  • Remember that when two linear equations are non-zero scalar multiples of one another, they represent the identical line and share infinitely many solutions.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by 1000 instead of dividing when converting mmol/L to mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    250 mmol/L=250000 mol/L  ⟹  400 mmol/L=400000 mol/L250\text{ mmol/L} = 250000\text{ mol/L} \implies 400\text{ mmol/L} = 400000\text{ mol/L}

    Correct

    250 mmol/L=0.25 mol/L  ⟹  400 mmol/L=0.40 mol/L250\text{ mmol/L} = 0.25\text{ mol/L} \implies 400\text{ mmol/L} = 0.40\text{ mol/L}

    To convert from a smaller metric unit (mmol\text{mmol}) to a larger base unit (mol\text{mol}), you must divide by 10001000, not multiply: 2501000=0.25\frac{250}{1000} = 0.25 and 4001000=0.40\frac{400}{1000} = 0.40.

  2. Step 2

    {250000x+400000y=1.80,1.25x+2.00y=9.00\lbrace 250000x + 400000y = 1.80,\quad 1.25x + 2.00y = 9.00

    Correct

    {0.25x+0.40y=1.80,1.25x+2.00y=9.00\lbrace 0.25x + 0.40y = 1.80,\quad 1.25x + 2.00y = 9.00

    Because of the multiplication error in the unit conversion, the coefficients of the first equation became off by a factor of 10610^6.

  3. Step 3

    250000/1.25=200000  ⟹  400000/2.00=200000  ⟹  1.80/9.00=0.2250000 / 1.25 = 200000 \implies 400000 / 2.00 = 200000 \implies 1.80 / 9.00 = 0.2

    Correct

    1.250.25=5  ⟹  2.000.40=5  ⟹  9.001.80=5\frac{1.25}{0.25} = 5 \implies \frac{2.00}{0.40} = 5 \implies \frac{9.00}{1.80} = 5

    Your ratio testing method was logically sound, but the incorrect input numbers produced mismatched ratios between the coefficients and the constants.

  4. Step 4

    Coefficients have ratio 200000200000 while constants have ratio 0.2  ⟹  0.2 \implies The system has no solution.

    Correct

    All ratios equal 5  ⟹  5 \implies Infinitely many solutions.

    Because the true ratio across both coefficients and constant terms is identical (55), the two equations represent the exact same line, meaning there are infinitely many solutions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that comparing the proportional ratios of xx-coefficients, yy-coefficients, and constants determines the solvability of a linear system.

You correctly reasoned that if variable coefficients share a common multiple that differs from the constant terms' multiple, the resulting system has no solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted metric prefix unit conversion

You performed multiplication by 10001000 instead of division by 10001000 when converting mmol/L\text{mmol/L} to mol/L\text{mol/L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of metric prefix scaling: when moving from a smaller unit (milli-\text{milli-}) to a larger unit, the numerical value must decrease by dividing by the conversion factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Scaling Sense-Check
  • Smaller unit →\rightarrow Larger unit means dividing: 1 mol=1000 mmol1\text{ mol} = 1000\text{ mmol}, so 1 mmol=10−3 mol1\text{ mmol} = 10^{-3}\text{ mol}.

  • Check whether the converted numerical value is smaller than the original millimole count before plugging it into equations.

System Proportionality Test
  • For {a1x+b1y=c1,a2x+b2y=c2\lbrace a_1x + b_1y = c_1,\quad a_2x + b_2y = c_2, if a2a1=b2b1=c2c1=k\frac{a_2}{a_1} = \frac{b_2}{b_1} = \frac{c_2}{c_1} = k, the lines coincide.

  • Ensure all terms share the same scale factor before declaring no solution or infinite solutions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the millimolar concentrations by dividing by 10001000: 250 mmol/L=0.25 mol/L250\text{ mmol/L} = 0.25\text{ mol/L} and 400 mmol/L=0.40 mol/L400\text{ mmol/L} = 0.40\text{ mol/L}.

  2. Rewrite the system in consistent molarity units: {0.25x+0.40y=1.80,1.25x+2.00y=9.00\lbrace 0.25x + 0.40y = 1.80,\quad 1.25x + 2.00y = 9.00.

  3. Compute the ratios between corresponding terms: 1.250.25=5\frac{1.25}{0.25} = 5, 2.000.40=5\frac{2.00}{0.40} = 5, and 9.001.80=5\frac{9.00}{1.80} = 5.

Final answer

Infinitely many solutions

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting SI prefixes (milli, micro, kilo) using dimensional analysis fractions (e.g., ×1 mol1000 mmol\times \frac{1\text{ mol}}{1000\text{ mmol}}) so units cancel explicitly.

  • Solve linear systems with differing units by standardizing all quantities to the base unit first before taking coefficient ratios.

OverviewACEpath Teacher's Diagnosis

03 The student correctly converts the units and identifies that the lines have identical coefficients when scaled, but mistakenly concludes that parallel identical equations mean no solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    250 mmol/L\text{ mmol/L} = 0.25 mol/L\text{ mol/L}   ⟹  \implies 400 mmol/L\text{ mmol/L} = 0.40 mol/L\text{ mol/L}   ⟹  \implies 0.25x + 0.40y = 1.80,  1.25x + 2.00y = 9.00

  2. Step 2

    5 ⋅\cdot (0.25x + 0.40y) = 1.25x + 2.00y   ⟹  \implies 5 ⋅\cdot 1.80 = 9.00

  3. Step 3

    The two lines have the same slope, so they are parallel and do not intersect.\text{The two lines have the same slope, so they are parallel and do not intersect.}

    Correct

    Because both the coefficients and the constant scale by \text{Because both the coefficients and the constant scale by } 5,  the two equations represent the exact same line (coincident lines).\text{ the two equations represent the exact same line (coincident lines).}

    When two linear equations are identical scalar multiples of each other, they share not only the same slope but also the exact same position (the same intercepts). They coincide everywhere rather than running parallel without touching.

  4. Step 4

    The system has no solution.\text{The system has no solution.}

    Correct

    The system has infinitely many solutions.\text{The system has infinitely many solutions.}

    Because the equations describe the same line, every point on that line is a valid solution, giving infinitely many solutions.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted mmol/L\text{mmol/L} to mol/L\text{mol/L} accurately by dividing by 10001000.

You correctly multiplied through by a scalar factor of 55 to compare both sides of the equations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parallel vs. Coincident Lines Misinterpretation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated equal slopes as sufficient proof that the lines are non-intersecting parallel lines, overlooking that when the constant terms also scale by the same proportion, the lines are coincident (identical) and overlap everywhere.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Constant Term Ratio
  • For a system a1x+b1y=c1a_1x + b_1y = c_1 and a2x+b2y=c2a_2x + b_2y = c_2, if a1a2=b1b2=c1c2=k\frac{a_1}{a_2} = \frac{b_1}{b_2} = \frac{c_1}{c_2} = k, the lines are identical, not separate parallel lines.

  • Always compare the constant ratio to the coefficient ratio: if all three ratios match, conclude 'infinitely many solutions'; if only the coefficient ratios match while the constants differ, conclude 'no solution'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Since 5⋅(0.25x+0.40y)=1.25x+2.00y5 \cdot (0.25x + 0.40y) = 1.25x + 2.00y and 5⋅1.80=9.005 \cdot 1.80 = 9.00, the second equation is completely equivalent to the first equation.

  2. Both equations graph to the exact same straight line in the xyxy-plane.

  3. Because every point (x,y)(x, y) on this line satisfies both equations simultaneously, the system is consistent and dependent.

Final answer

Infinitely many solutions

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the three geometric cases for linear systems: intersecting (one solution), parallel distinct (no solution), and coincident (infinitely many solutions).

  • Practice using the ratio test a1a2=b1b2=?c1c2\frac{a_1}{a_2} = \frac{b_1}{b_2} \stackrel{?}{=} \frac{c_1}{c_2} to quickly classify systems.

Lock it in

Similar question

01

A physics laboratory models current flow using: {300 mA⋅x+600 mA⋅y=1.5 A,1.2 A⋅x+2.4 A⋅y=6.0 A\lbrace 300\text{ mA} \cdot x + 600\text{ mA} \cdot y = 1.5\text{ A},\quad 1.2\text{ A} \cdot x + 2.4\text{ A} \cdot y = 6.0\text{ A}. Convert all quantities to amperes (A\text{A}) and determine whether the system has one, none, or infinitely many solutions.

Answer

Infinitely many solutions. Dividing by 1000 mA/A1000\text{ mA/A} transforms the first equation into 0.3x+0.6y=1.50.3x + 0.6y = 1.5. Comparing ratios gives 1.20.3=4\frac{1.2}{0.3} = 4, 2.40.6=4\frac{2.4}{0.6} = 4, and 6.01.5=4\frac{6.0}{1.5} = 4. Because all ratios are equal to 44, the two equations represent the exact same line.

02

Determine whether the following system of equations has one solution, no solution, or infinitely many solutions after converting all quantities to consistent metric units of meters (m\text{m}): {450 mm⋅x+750 mm⋅y=3.0 m,1.8 m⋅x+3.0 m⋅y=15.0 m\lbrace 450\text{ mm} \cdot x + 750\text{ mm} \cdot y = 3.0\text{ m},\quad 1.8\text{ m} \cdot x + 3.0\text{ m} \cdot y = 15.0\text{ m}.

Answer

No solution. Convert millimeters to meters by dividing by 10001000: 0.45x+0.75y=3.00.45x + 0.75y = 3.0. The coefficient ratios are 1.80.45=4\frac{1.8}{0.45} = 4 and 3.00.75=4\frac{3.0}{0.75} = 4, but the constant ratio is 15.03.0=5\frac{15.0}{3.0} = 5. Since a2a1=b2b1≠c2c1\frac{a_2}{a_1} = \frac{b_2}{b_1} \neq \frac{c_2}{c_1}, the equations represent distinct parallel lines.

03

A biochemical reactor balances two reagents xx and yy under two sensors: {150 mmol/L⋅x+250 mmol/L⋅y=1.00 mol/L,0.90 mol/L⋅x+k mol/L⋅y=6.00 mol/L\lbrace 150\text{ mmol/L} \cdot x + 250\text{ mmol/L} \cdot y = 1.00\text{ mol/L},\quad 0.90\text{ mol/L} \cdot x + k\text{ mol/L} \cdot y = 6.00\text{ mol/L}. Find the value of kk that gives the system infinitely many solutions, and state the solution type if k=1.60k = 1.60.

Answer

k=1.50k = 1.50 yields infinitely many solutions; if k=1.60k = 1.60, the system has exactly one unique solution. Converting to mol/L\text{mol/L} yields 0.15x+0.25y=1.000.15x + 0.25y = 1.00. The constant ratio is 6.001.00=6\frac{6.00}{1.00} = 6, and the xx-ratio is 0.900.15=6\frac{0.90}{0.15} = 6. For infinitely many solutions, k0.25=6  ⟹  k=1.50\frac{k}{0.25} = 6 \implies k = 1.50. If k=1.60k = 1.60, 0.900.15≠1.600.25\frac{0.90}{0.15} \neq \frac{1.60}{0.25} (6≠6.46 \neq 6.4), so the lines intersect at exactly one point.

Loading workspace…