Resources

An environmental quality analyst conducts a two-tailed test for soil contaminant levels where the test statistic is calculated as z=−1.88z = -1.88. Rather than solving for the standardized test statistic, determine: (a) the one-tailed upper tail area P(Z>1.88)P(Z > 1.88), (b) the two-tailed PP-value for the test H0:μ=50 ppmH_0: \mu = 50\text{ ppm} versus Ha:μ≠50 ppmH_a: \mu \neq 50\text{ ppm}, and (c) the largest standard significance level α\alpha among 0.100.10, 0.050.05, and 0.010.01 at which the analyst would fail to reject the null hypothesis.

Answer and steps

Final answer

(a) P(Z>1.88)=0.0301P(Z > 1.88) = 0.0301; (b) Two-tailed PP-value =2×0.0301=0.0602= 2 \times 0.0301 = 0.0602; (c) α=0.05\alpha = 0.05 (since 0.0602>0.050.0602 > 0.05, but 0.0602<0.100.0602 < 0.10).

Steps

Part (a): Finding the Upper-Tail Area P(Z>1.88)P(Z > 1.88)

For a standard normal distribution Z∼N(0,1)Z \sim N(0, 1), the area to the right of a positive zz-score is given by the complement of the cumulative distribution function Φ(z)\Phi(z):

P(Z>1.88)=1−P(Z≤1.88)=1−Φ(1.88)P(Z > 1.88) = 1 - P(Z \le 1.88) = 1 - \Phi(1.88)

From the standard normal cumulative probability table, the cumulative probability up to z=1.88z = 1.88 is:

Φ(1.88)=0.9699\Phi(1.88) = 0.9699

Subtracting this from 11:

P(Z>1.88)=1−0.9699=0.0301P(Z > 1.88) = 1 - 0.9699 = 0.0301


Part (b): Finding the Two-Tailed PP-Value

In a two-tailed test with alternative hypothesis Ha:μ≠50 ppmH_a: \mu \neq 50\text{ ppm}, extreme outcomes can fall into either tail. Because the normal distribution is symmetric about 00, the probability of observing a test statistic at least as extreme as z=−1.88z = -1.88 includes both the lower tail area (Z≤−1.88Z \le -1.88) and the upper tail area (Z≥1.88Z \ge 1.88):

Two-tailed P-value=P(∣Z∣≥∣−1.88∣)=P(Z≤−1.88)+P(Z≥1.88)\text{Two-tailed } P\text{-value} = P(|Z| \ge |-1.88|) = P(Z \le -1.88) + P(Z \ge 1.88)

By symmetry, P(Z≤−1.88)=P(Z≥1.88)=0.0301P(Z \le -1.88) = P(Z \ge 1.88) = 0.0301:

Two-tailed P-value=2⋅0.0301=0.0602\text{Two-tailed } P\text{-value} = 2 \cdot 0.0301 = 0.0602

Common Pitfall: Forgetting to double the single tail area in a two-tailed hypothesis test. Always multiply by 22 when the alternative hypothesis uses ≠\neq.


Part (c): Determining the Significance Level α\alpha

The decision rule for hypothesis testing is:

  • Reject H0H_0 if P-value<αP\text{-value} < \alpha.
  • Fail to reject H0H_0 if P-value≥αP\text{-value} \ge \alpha.

We compare the calculated P-value=0.0602P\text{-value} = 0.0602 against each candidate significance level:

  • At α=0.10\alpha = 0.10: 0.0602<0.10  ⟹  0.0602 < 0.10 \implies Reject H0H_0
  • At α=0.05\alpha = 0.05: 0.0602≥0.05  ⟹  0.0602 \ge 0.05 \implies Fail to reject H0H_0
  • At α=0.01\alpha = 0.01: 0.0602≥0.01  ⟹  0.0602 \ge 0.01 \implies Fail to reject H0H_0

The analyst fails to reject the null hypothesis at both α=0.05\alpha = 0.05 and α=0.01\alpha = 0.01. Among the choices {0.10,0.05,0.01}\{0.10, 0.05, 0.01\}, the largest standard significance level where the analyst fails to reject H0H_0 is:

α=0.05\alpha = 0.05

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to double the single-tail probability when calculating the P-value for a two-tailed test, leading to an incorrect decision threshold.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(Z<1.88)=0.9699  ⟹  P(Z>1.88)=1−0.9699=0.0301P(Z < 1.88) = 0.9699 \implies P(Z > 1.88) = 1 - 0.9699 = 0.0301

  2. Step 2

    P-value=P(Z<−1.88)=0.0301\text{P-value} = P(Z < -1.88) = 0.0301

    Correct

    Two-tailed P-value=2×P(Z≤−1.88)=2×0.0301=0.0602\text{Two-tailed } P\text{-value} = 2 \times P(Z \le -1.88) = 2 \times 0.0301 = 0.0602

    Because the alternative hypothesis is two-sided (Ha:μ≠50 ppmH_a: \mu \neq 50\text{ ppm}), extreme values occur in both tails. You need to multiply the single-tail probability by 22.

  3. Step 3

    Fail to reject \text{Fail to reject } H_0  when \text{ when } P-value\text{-value} ≥\ge α\alpha   ⟹  \implies 0.0301 ≥\ge 0.01,  but \text{ but } 0.0301 < 0.05  and \text{ and } 0.0301 < 0.10   ⟹  \implies Largest \text{Largest } α\alpha  is \text{ is } 0.01

    Correct

    0.0602 ≥\ge 0.05  and \text{ and } 0.0602 ≥\ge 0.01,  but \text{ but } 0.0602 < 0.10   ⟹  \implies Largest \text{Largest } α\alpha  is \text{ is } 0.05

    Your decision logic is entirely sound, but your final threshold was affected by using the single-tail area 0.03010.0301 instead of the true two-tailed PP-value 0.06020.0602.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the complement rule and standard normal table to find the upper tail probability in part (a).

You clearly stated the correct decision criterion that fails to reject H0H_0 whenever the PP-value is greater than or equal to α\alpha.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Two-Tailed Multiplier

You found the probability of being in one tail (0.03010.0301) but forgot to double it for a two-tailed alternative hypothesis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that a non-directional alternative hypothesis (Ha:μ≠μ0H_a: \mu \neq \mu_0) defines 'more extreme' outcomes in both tails of the distribution simultaneously.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect the Alternative Hypothesis
  • If HaH_a contains ≠\neq, the test is two-tailed and requires summing both tails: P-value=2×P(Z≥∣z∣)P\text{-value} = 2 \times P(Z \ge |z|).

  • Check the sign in HaH_a before writing the PP-value formula; if you see ≠\neq, immediately write down a factor of 22.

Evaluate Rejection Thresholds with the Doubled Area
  • Compare the doubled PP-value to the significance levels: fail to reject if P-value≥αP\text{-value} \ge \alpha.

  • Substitute 0.06020.0602 into the comparison to see that 0.0602>0.050.0602 > 0.05, making α=0.05\alpha = 0.05 the largest standard level where you fail to reject.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the hypothesis test is two-tailed because Ha:μ≠50 ppmH_a: \mu \neq 50\text{ ppm}.

  2. Double the one-tailed probability: Two-tailed P-value=2×P(Z<−1.88)=2×0.0301=0.0602\text{Two-tailed } P\text{-value} = 2 \times P(Z < -1.88) = 2 \times 0.0301 = 0.0602.

  3. Compare the correct PP-value to each significance level: at α=0.10\alpha = 0.10, 0.0602<0.100.0602 < 0.10 (reject H0H_0); at α=0.05\alpha = 0.05, 0.0602≥0.050.0602 \ge 0.05 (fail to reject H0H_0); at α=0.01\alpha = 0.01, 0.0602≥0.010.0602 \ge 0.01 (fail to reject H0H_0).

  4. Select the largest candidate significance level where you fail to reject H0H_0, which is α=0.05\alpha = 0.05.

Final answer

(a) P(Z>1.88)=0.0301P(Z > 1.88) = 0.0301; (b) Two-tailed PP-value =0.0602= 0.0602; (c) Largest α=0.05\alpha = 0.05

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between one-tailed tests (<< or >>) and two-tailed tests (≠\neq).

  • Practice sketching both tails on a standard normal curve whenever HaH_a has a not-equal sign.

  • Rework the comparison step whenever an updated PP-value changes which significance boundaries are crossed.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the rejection condition by rejecting the null hypothesis when the P-value is greater than alpha instead of when it is less than alpha.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(Z>1.88)=1−0.9699=0.0301P(Z > 1.88) = 1 - 0.9699 = 0.0301

  2. Step 2

    P-value=2×0.0301=0.0602\text{P-value} = 2 \times 0.0301 = 0.0602

  3. Step 3

    Fail to reject H0 when P-value<α\text{Fail to reject } H_0 \text{ when } P\text{-value} < \alpha

    Correct

    Reject H0 when P-value<α;Fail to reject H0 when P-value≥α\text{Reject } H_0 \text{ when } P\text{-value} < \alpha; \quad \text{Fail to reject } H_0 \text{ when } P\text{-value} \ge \alpha

    You inverted the hypothesis testing decision rule. A PP-value smaller than α\alpha means the observed result is unusually extreme under H0H_0, which gives evidence to reject H0H_0, not fail to reject it.

  4. Step 4

    0.0602<0.10  ⟹  Largest α is 0.100.0602 < 0.10 \implies \text{Largest } \alpha \text{ is } 0.10

    Correct

    0.0602≥0.05 and 0.0602≥0.01  ⟹  Largest α is 0.050.0602 \ge 0.05 \text{ and } 0.0602 \ge 0.01 \implies \text{Largest } \alpha \text{ is } 0.05

    Because you reversed the decision condition in the previous step, you identified the significance level where H0H_0 is rejected (0.0602<0.100.0602 < 0.10) instead of the largest level where you fail to reject (0.0602≥α0.0602 \ge \alpha).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the standard normal distribution table to evaluate the upper-tail probability P(Z>1.88)P(Z > 1.88).

You correctly accounted for the two-tailed alternative hypothesis by doubling the one-tail area to get 0.06020.0602.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Rejection Rule

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the condition for rejecting the null hypothesis with the condition for failing to reject it. When P-value<αP\text{-value} < \alpha, the data provide strong enough evidence to reject H0H_0. Conversely, we fail to reject H0H_0 when P-value≥αP\text{-value} \ge \alpha.

REASONING PATH
Your ACEpath teacher’s suggested approach
Hypothesis Decision Criterion
  • If P-value<αP\text{-value} < \alpha, reject H0H_0. If P-value≥αP\text{-value} \ge \alpha, fail to reject H0H_0.

  • Remember the mnemonic: 'If the PP is low, the null must go.' If PP is not low (P≥αP \ge \alpha), H0H_0 stays (fail to reject).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the correct decision rule: Fail to reject H0H_0 if and only if P-value≥αP\text{-value} \ge \alpha.

  2. Compare the calculated P-value=0.0602P\text{-value} = 0.0602 to each given significance level: at α=0.10\alpha = 0.10, 0.0602<0.100.0602 < 0.10 (Reject H0H_0); at α=0.05\alpha = 0.05, 0.0602≥0.050.0602 \ge 0.05 (Fail to reject H0H_0); at α=0.01\alpha = 0.01, 0.0602≥0.010.0602 \ge 0.01 (Fail to reject H0H_0).

  3. Select the largest α\alpha among the levels where the analyst fails to reject H0H_0, which is 0.050.05.

Final answer

(a) P(Z>1.88)=0.0301P(Z > 1.88) = 0.0301; (b) Two-tailed PP-value =0.0602= 0.0602; (c) α=0.05\alpha = 0.05

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard decision rule: reject H0H_0 when P-value<αP\text{-value} < \alpha.

  • Practice comparing a fixed PP-value across multiple significance levels (0.100.10, 0.050.05, 0.010.01) to state the decision at each level before picking the maximum or minimum.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the standard normal cumulative probability table value as the upper-tail area without subtracting it from 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(Z>1.88)=0.9699P(Z > 1.88) = 0.9699

    Correct

    P(Z>1.88)=1−P(Z≤1.88)=1−0.9699=0.0301P(Z > 1.88) = 1 - P(Z \le 1.88) = 1 - 0.9699 = 0.0301

    You equated the upper-tail area P(Z>1.88)P(Z > 1.88) directly to the cumulative probability Φ(1.88)=0.9699\Phi(1.88) = 0.9699. Because standard normal tables give the area to the left, the area in the right tail must be calculated as 1−Φ(z)1 - \Phi(z).

  2. Step 2

    P-value=2∗(1−0.9699)=0.0602\text{P-value} = 2 * (1 - 0.9699) = 0.0602

  3. Step 3

    Fail to reject H0 when P-value≥α  ⟹  0.0602≥0.05  ⟹  Largest α is 0.05\text{Fail to reject } H_0 \text{ when P-value} \ge \alpha \implies 0.0602 \ge 0.05 \implies \text{Largest } \alpha \text{ is } 0.05

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly doubled the tail area to calculate the two-tailed PP-value.

You stated the correct decision criterion for failing to reject the null hypothesis.

You accurately compared 0.06020.0602 against standard significance levels to identify the largest valid α\alpha.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cumulative vs. tail area confusion

You recognized in part (b) that the tail area required 1−0.96991 - 0.9699, but forgot to apply that subtraction when reporting P(Z>1.88)P(Z > 1.88) in part (a).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Standard normal distribution tables provide the cumulative area to the left, P(Z≤z)=Φ(z)P(Z \le z) = \Phi(z). When asked for an upper tail P(Z>z)P(Z > z) where z>0z > 0, the value must be strictly less than 0.50.5, requiring the complement rule 1−Φ(z)1 - \Phi(z).

REASONING PATH
Your ACEpath teacher’s suggested approach
Tail Area Reasonableness Check
  • For any positive zz-score (z>0z > 0), the right tail P(Z>z)P(Z > z) must be strictly less than 0.500.50.

  • If your table lookup yields a value greater than 0.500.50 for a positive zz right tail, immediately subtract it from 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify from the standard normal table that the cumulative left-tail area is Φ(1.88)=0.9699\Phi(1.88) = 0.9699.

  2. Apply the complement rule for the upper tail: P(Z>1.88)=1−0.9699=0.0301P(Z > 1.88) = 1 - 0.9699 = 0.0301.

Final answer

(a) P(Z>1.88)=0.0301P(Z > 1.88) = 0.0301; (b) Two-tailed PP-value =0.0602= 0.0602; (c) α=0.05\alpha = 0.05

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the standard normal curve and shade the requested region before writing down the numerical value.

  • Check whether your tail area is consistent with whether zz is in the positive or negative half of the distribution.

Lock it in

Similar question

01

A researcher conducts a two-tailed test with hypotheses H0:μ=100H_0: \mu = 100 versus Ha:μ≠100H_a: \mu \neq 100. The computed test statistic is z=2.05z = 2.05. Given that Φ(2.05)=0.9798\Phi(2.05) = 0.9798, calculate the two-tailed PP-value.

Answer

0.04040.0404. The upper tail area is P(Z≥2.05)=1−0.9798=0.0202P(Z \ge 2.05) = 1 - 0.9798 = 0.0202. Since the test is two-tailed, double this area: P-value=2×0.0202=0.0404P\text{-value} = 2 \times 0.0202 = 0.0404.

02

For a two-tailed hypothesis test, the calculated test statistic is z=−1.75z = -1.75, with P(Z≤−1.75)=0.0401P(Z \le -1.75) = 0.0401. Determine whether H0H_0 is rejected at (a) α=0.10\alpha = 0.10 and (b) α=0.05\alpha = 0.05.

Answer

(a) Reject H0H_0; (b) Fail to reject H0H_0. The two-tailed PP-value is 2×0.0401=0.08022 \times 0.0401 = 0.0802. At α=0.10\alpha = 0.10, 0.0802<0.100.0802 < 0.10 so we reject H0H_0. At α=0.05\alpha = 0.05, 0.0802≥0.050.0802 \ge 0.05 so we fail to reject H0H_0.

03

An engineer tests H0:μ=12.0H_0: \mu = 12.0 against Ha:μ≠12.0H_a: \mu \neq 12.0. The one-tailed tail probability is P(Z>∣z∣)=0.0260P(Z > |z|) = 0.0260. Find the two-tailed PP-value, and identify the smallest significance level among α∈{0.10,0.05,0.01}\alpha \in \{0.10, 0.05, 0.01\} at which H0H_0 is rejected.

Answer

Two-tailed PP-value =0.0520= 0.0520; smallest significance level to reject is α=0.10\alpha = 0.10. The two-tailed PP-value is 2×0.0260=0.05202 \times 0.0260 = 0.0520. We reject when P-value<αP\text{-value} < \alpha. Since 0.0520<0.100.0520 < 0.10, but 0.0520≥0.050.0520 \ge 0.05 and 0.0520≥0.010.0520 \ge 0.01, the only candidate level that rejects H0H_0 (and thus the smallest) is α=0.10\alpha = 0.10.

Loading workspace…